average

average, Total:223 items.

The international standard classification for "average" includes: Special measuring equipment for use in telecommunications , Chemical analysis of metals , Natural fibres , Fertilizers , Films and sheets , Glass in general , Plastics , Reinforced plastics , Musical instruments , Cellular materials , Thermal insulation , Microbiology of water , Aliphatic hydrocarbons , Application of statistical methods , Aromatic hydrocarbons , Rubber compounding ingredients , Cement. Gypsum. Lime. Mortar , Other methods of testing of metals , Raw materials , Animal feeding stuffs , Motion picture films. Cartridges , Photographic paper, films and cartridges , Medical Sciences and health care facilities in general .

The Chinese standard classification for "average" includes: Other electronic instrument and equipment , Metallographic testing method , Half finished wool products , Basic standards and general methods on chemical fertilizers , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Ceramic and glass in general , Fibre reinforced composites , Musical instruments , Heat insulation, sound absorption, light fireproof material , Separating machinery , Surface active agent , Mathematics , General organic chemicals , Carbon black , Laboratory glass, ceramic and plastic vessel , Technical management , Technical Management , Daily use glass, ceramic, enamel and plastic products in general , Livestock and poultry feed and additive , Basic standards and general methods for photosensitive material , Photosensitive material , Marking, packaing, transport and storage .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10516-1989 The determination of average crushing strength for nitrophosphate
GB/T 12811-1991 Test method for average cell size of rigid cellular plastics
GB/T 32361-2015 Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test
GB/T 30965-2014 Earth-moving machinery―Determination of average ground contact pressure for crawler machines.
GB/T 17181-1997 Integrating-averaging sound level meters
GB/T 9862-1988 Method for determining the speed and average gradient of black-and-white aerial camera films
GB/T 4891-1985 Choice of sample size to estimate the average quality of a lot or process
GB/T 6394-2002 Metal - Methods for estimating the average grain size
GB/T 2572-2005 Fiber - reiforced plastics composites - Determination for mean coefficient of linear expansion
GB/T 16920-1997 Glass--Determination of coefficient of mean linear thermal expansion
GB/T 16920-2015 Glass―Determination of coefficient of mean linear thermal expansion
GB/T 11603-2022 Determination of mean diameter of wool fibres—Air permeability method
GB/T 5177.3-1985 Determination of mean relative molecular mass for industrial alkylbenzene--Gas-liquid chromatographic method
GB/T 10516-2012 Determination of average crushing strength for nitrophosphate
GB/T 5480.4-2004 Test methods for mineral wool and its products―Part 4:Average diameter of fibers
GB/T 20220-2006 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
GB/T 13530.3-1992 Sodium ethoxylated alkyl sulfate--Determination of the mean relative molecular mass
GB/T 11603-2006 Wool-Determination of mean diameter of fibres―Air permeability method
GB/T 3140-2005 Fiber-reinforced plastics composites—Determination of mean specific heat capacity
GB/T 38516-2020 Permeable sintered metal materials—Determination of average pore size of medium flow
GB 10516-1989 The determination of average crushing strength for nitrophosphate
GB/T 23146-2008 Calculation of frequency of twelve-tone equal temperament and cent
GB/T 4891-2008 Choice of sample size for estimating the average quality of a lot or process
GB/T 12010.9-1989 Determination for average polymerization degree of polyvinyl alcohol resins
GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
GB/T 5480.4-1985 Test method for the average diameter of fibers constituting mineral wool and its products
GB/T 28600-2012 Rubber compounding ingredients—Silica,precipitated,hydrated—Determination of average pore diameter
GB 11603-1989 Determination for mean diameter of wool fibres by airflow method
GB/T 12010.5-2010 Plastic—Poly(vinyl alcohol) (PVAL) materials—Part 5:Determination for average polymerization degree
GB/T 23146-2008(英文版) Calculation of frequency of twelvetone equal temperament and c

Professional Standard - Electron

SJ/T 11036-1996 Test method for average linear thermal expansion coefficent of electronic glass
SJ/T 10557.3-1994 Method for measurement of average dislocation density of Aluminium foil for electroytic capacitor
SJ/Z 9151-1987 Intergrating-averaging sound level meters

国家铁路局

TB/T 3447-2016 Locomotive average hose connector

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 6394-2017 Metal - Methods for estimating the average grain size

Professional Standard - Light Industry

QB/T 1321-2012 Test method for mean liner thermal expansion coefficient of ceramic material
QB 2100-1995 The Label Measurement of Pitch Name of the Equal Temperament
QB/T 1321-1991 Test Method for Mean Liner Thermal Expansion Coefficient of Ceramic Material
QB 2100-2007 The label measurement of pitch name of the equal temperament

Professional Standard - Ferrous Metallurgy

YB/T 5148-1993 Metal-methods for Estimating the Average Grain Size

Taiwan Provincial Standard of the People's Republic of China

CNS 7915-1981 Average Molecular Weight of Fatty Quaternary Ammonium Chlorides
CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
CNS 6614-1984 Method of Test for Average Linear Thermal Expansion of Glass
CNS 7250-1989 Method for Determining Average Concentration of Weld Fume in Welding Environment
CNS 6713-2005 Wood - Determination of average annual ring width
CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)

Professional Standard - Non-ferrous Metal

YS/T 347-2004 Copper and copper alloys - Estimation of average grain size

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method

Professional Standard - Building Materials

JC/T 679-1997 Glass - The method for measuring coefficient of mean linear thermal expansion

Professional Standard - Aerospace

QJ 970-1986 Rigid solid average linear expansion coefficient test method
QJ 1867-1990 Adhesive average linear expansion coefficient test method
QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°

Professional Standard - Rare Earth

XB/T 701-1996 Determination of Average Particle Size of Samarium Cobalt Permanent Magnetic Alloy Powder by Freund's Method

Group Standards of the People's Republic of China

T/CFA 0106024-2021 Determination of the average grain size of cast aluminium silicon alloys
T/CPSS 1014-2021 Technology specification of switching power supply for mean time between failure (MTBF) reliability

Military Standard of the People's Republic of China-General Armament Department

GJB 2823-1997 Evaluation method for average factory quality level of electronic component products

Professional Standard - Chemical Industry

HG/T 2911-1997 Photography--Source document microfilms--Determination of ISO speed and ISO average gradient
HG/T 2620-1994 Determination Method for Sensitivity and Average Gradient of Colour Cine Positive Film
HG/T 2224-1991 Granular Triple Superphosphate - Determination of the Mean Compressive Strength of Particles

Professional Standard - Pharmaceutical Packaging

YBB 0020-2003 Pingjunxianrepengzhangxishu Cedingfa Tests for coefficient of mean linear thermal expansion

国家发展和改革委员会

QB/T 2100-2007 The label measurement of pitch name of the equal temperament

国家广播电影电视总局

GY/T 282-2014 Technical requirements for average loudness and true peak audio level of digital television programs

National Metrological Technical Specifications of the People's Republic of China

JJF 1976-2022 Calibration Specification for Averaged Color Temperature Standard Lamp

Professional Standard - Electricity

DL/T 580-2013 Method for Measuring Average Moisture Content in Insulating Paper in Transformers by Dew Point Measurement
DL/T 580-1995 Method for measuring average moisture content in insulating paper in transformers by dew point measurement

Korean Agency for Technology and Standards (KATS)

KS B 4101-2002 ENGINE LATHES
KS C 1505-2001(2012) Integrating-averaging sound level meters
KS F 2202-2022 Determination of average width of annual rings for wood
KS F 2202-2016 Determination of average width of annual rings for wood
KS F 2202-1965 Determination of average width of annual rings for wood
KS F 2202-2001 Determination of average width of annual rings for wood
KS A 3261-1969(2001) INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATIONUNKNOWN)
KS L ISO 7991-2022 Glass－Determination of coefficient of mean linear thermal expansion
KS M ISO 186:2004 Paper and board－Sampling to determine average quality
KS L 2506-2019 Testing method for average linear thermal expansion of glass
KS K 0438-2012 Measuring method for average degree of polymerization of rayon yarn
KS K 0438-1973 Measuring method for average degree of polymerization of rayon yarn
KS L ISO 7991:2012 Glass－Determination of coefficient of mean linear thermal expansion
KS L 2506-2009(2019) Testing method for average linear thermal expansion of glass
KS D ISO 2624-2002(2017) Copper and copper alloys－Estimation of average grain size
KS L ISO 7991-2012(2017) Glass－Determination of coefficient of mean linear thermal expansion
KS L 2506-1999 Testing method for average linear thermal expansion of glass
KS L 2506-2009 Testing method for average linear thermal expansion of glass
KS M ISO 186:2020 Paper and board — Sampling to determine average quality

German Institute for Standardization

DIN 45641:1990-06 Averaging of sound levels
DIN 45641:1990 Averaging of sound levels
DIN 47301-3:1965 Definitions of radio frequency transmission lines; mean characteristic impedance, mean standing wave ratio
DIN 6173-2:1983-10 Colour matching; lighting conditions for average artificial daylight
DIN EN ISO 186:2002-08 Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002

American National Standards Institute （ANSI)

AAMI TIR23:1999(R2019) Signal averaging
AAMI TIR23:1999 Signal averaging, 1ed
ANSI/CEA 2037-2010 Determination of Television Average Power Consumption
ANSI S1.43-1997 Specifications for Integrating-Averaging Sound Level Meters
ANSI/TAPPI T1016 om-2010 Average fiber diameter of fiber glass mats

Standard Association of Australia （SAA）

AS 2810:1991 Wool - Measurement of mean staple length and mean staple strength
AS 2810:1985 Wool - Determination of mean staple length and mean staple strength
AS 1259.2:1990 Acoustics - Sound level meters - Integrating - Averaging
AS 1133:1985 Wool - Determination of the mean fibre diameter of raw wool

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R P.1510-1-2017 Mean surface temperature

International Telecommunication Union (ITU)

ITU-R P.1510-2017 Mean surface temperature
ITU-R P.1510 SPANISH-2001 Annual Mean Surface Temperature
ITU-R P.1510-2001 Annual Mean Surface Temperature
ITU-R P.1510 FRENCH-2001 Annual Mean Surface Temperature
ITU-T P.800.1-2006 Mean Opinion Score (MOS) terminology Study Group 12

RU-GOST R

GOST 25786-1983 Lasers. Measuring methods of average power, pulse average power, relative average power instability
GOST 9105-1974 The determination method of polymerisation average degree
GOST 18986.16-1972 Rectifier diodes. Methods of measuring average forward voltage and average reverse current
GOST 8.473-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed X-ray radiation fluence energy
GOST 15173-1970 Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST R 57954-2017 Plastics. Determination of the mean-failure energy by Gardner method
GOST 32546-2013 Paper and board. Sampling to determine average quality
GOST 13496.0-1980 Mixed feeding-stuffs. Methods of sampling of average sample

SCC

VDI 4675 BLATT 2-2019 Balance-based averaging of inhomogeneous flow fields — Applications
VDI 4675 BLATT 1-2012 Balance-based averaging of inhomogeneous flow fields — Introduction
VDI 4675 BLATT 2-2019 Balance-based averaging of inhomogeneous flow fields — Applications
VDI 4675 BLATT 1-2012 Balance-based averaging of inhomogeneous flow fields — Introduction
DANSK DS/EN 60804:2001 Integrating-averaging sound level meters
DANSK DS/IEC 804:1990 Integrating-averaging sound level meters
BS EN 60804:1994 Specification for integrating-averaging sound level meters
IEC 60804:1985/AMD1:1989 Amendment 1 - Integrating-averaging sound level meters
IEC 60804:1985/AMD2:1993 Amendment 2 - Integrating-averaging sound level meters
AWWA JAW39269 Journal AWWA — Time-Averaging Water Quality Assessment
VDI/VDE 2640 BLATT 4-1983 Network measurements in flow cross sections; determination of the average temperature in flowing liquids
BS EN ISO 186:1996 Paper and board. Sampling to determine average quality

VDI - Verein Deutscher Ingenieure

VDI 4675 BLATT 2-2017 Bilanzgerechte Mittelung inhomogener Stroemungsfelder - Anwendung
VDI 4675 Blatt 1-2006 Bilanzgerechte Mittelung inhomogener Stroemungsfelder - Einfuehrung
VDI 4675 Blatt 1-2003 Bilanzgerechte Mitteilung inhomogener Stroemungsfelder - Grundlagen

International Electrotechnical Commission (IEC)

IEC 60804:1985 Integrating-averaging sound level meters
IEC 60804:2000 Integrating-averaging sound level meters
IEC 60804/AMD1:1989 Integrating-averaging sound level meters; amendment No. 1 to IEC 60804:1985

CZ-CSN

CSN IEC 804:1993 Integrating-averaging sound level meters
CSN EN 60804 ZZ1-2004 integrated. average sound level meter
CSN 64 0143-1961 Solid non-ferrous material tests. Mean coefficient of thermal linear expansion
CSN 80 0601-1967 Determination of average grade of polymerization of ceDulose
CSN ISO 186:1992 Paper and board — Sampling to determine average quality
CSN 50 0405-1994 Filter papers-Determination of the mean flow pore diameter
CSN ISO 7991:1992 Glass. Determination of the coefficient of mean linear thermal expansion
CSN 50 3176-1960 Insulating board for electrical purposes (average quality)

South African Bureau of Standard

SANS 658:2008 Integrating-averaging sound level meters

Danish Standards Foundation

DS/IEC 804:1990 Integrating-averaging sound level meters

British Standards Institution (BSI)

BS EN 60804:2001 Integrating - averaging sound level meters
BS EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
BS EN ISO 186:2002 Paper and board - Sampling to determine average quality

CENELEC - European Committee for Electrotechnical Standardization

EN 60804:2000 Integrating-Averaging Sound Level Meters

GSO

GSO OIML R88:2005 INTEGRATING — AVERAGING SOUND LEVEL METERS
OS GSO OIML R88:2005 INTEGRATING — AVERAGING SOUND LEVEL METERS
OS GSO 1409:2002 Non- alcoholic carbonated averages- sampling
GSO ISO 4470:2015 Sawn timber -- Determination of the average moisture content of a lot
OS GSO ISO 4470:2015 Sawn timber -- Determination of the average moisture content of a lot
BH GSO ISO 4470:2016 Sawn timber -- Determination of the average moisture content of a lot
BH GSO ISO 186:2012 Paper and board -sampling to determine average quality.
OS GSO ISO 186:2011 Paper and board -sampling to determine average quality.
GSO ISO 7991:2010 Glass -- Determination of coefficient of mean linear thermal expansion

European Committee for Electrotechnical Standardization（CENELEC）

HD 499 S1-1990 Integrating-Averaging Sound Level Meters

RO-ASRO

STAS SR CEI 804+A1+A2-1995 Integrating - averaging sound level meters
STAS 7122/2-1986 STAT IST ICAL INTERPRETAT ION OF DATA Estimation of the mean and of the difference of two means

HU-MSZT

MNOSZ 6953-1952 Pork average weight chart
MNOSZ 13308-1952 Average ring edge sharpness determination
MSZ 21 870/2-1978 Determination of average engine emissions

SE-SIS

SIS 11 11 01-1969 Estimating the average grain size of metals
SIS MNC 1111-1967 Estimating the average grain size
SIS MNC 1113-1967 Extimatinir ihe average grain sizc
SIS MNC 1114-1967 tJstimating tlie average grain size
SIS MNC 1112-1967 Estimating the average grain size
SIS SS-IEC 804:1991 Acoustics - Integrating-averaging sound level meters

Consumer Electronics Association （U.S.)

CEA-2037-2010 Determination of Television Average Power Consumption
CEA-2037-2009 Determination of Television Average Power Consumption

Indonesia Standards

SNI 4137-2012 Test method for determination of the smallest average size (UKR) and the largest average size (UBR) aggregate grains

Illuminating Engineering Society of North America

IESNA LM-37-1997 Determination of Average Luminance for Indoor Luminaires

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-019-2011 Determining the Average R-Value of Tapered Insulation

Acoustical Society of America (ASA)

ASA S1.43-1998 Specifications for Integrating-Averaging Sound Level Meters R(2002)

IT-UNI

UNI 3273-1952 Average service life of railway carriages

International Organization for Standardization (ISO)

ISO 4470:1981 Sawn timber; Determination of the average moisture content of a lot
ISO 186:1977 Paper and board — Sampling for testing
ISO 186:2002 Paper and board - Sampling to determine average quality
ISO 2624:1973 Copper and copper alloys — Estimation of average grain size
ISO 7991:1987 Glass; Determination of coefficient of mean linear thermal expansion
ISO 186:1994 Paper and board - Sampling to determine average quality
ISO 186:1985 Paper and board; Sampling to determine average quality

API - American Petroleum Institute

API 4087-1970 A SURVEY OF AVERAGE DRIVING PATTERNS IN THE NEW YORK URBAN AREA
API 4034-1969 A SURVEY OF AVERAGE DRIVING PATTERNS IN THE CHICAGO URBAN AREA
API 4089-1969 A SURVEY OF AVERAGE DRIVING PATTERNS IN THE LOS ANGELES URBAN AREA
API 4084-1969 A SURVEY OF AVERAGE DRIVING PATTERNS IN THE HOUSTON URBAN AREA

Japanese Industrial Standards Committee (JISC)

JIS P 8110:2006 Paper and board -- Sampling to determine average quality

Spanish Association for Standardization (UNE)

UNE 21-181-1990 Remote calculation of electricity usage and average power
UNE 66045:1978 ESTIMATION OF THE MEAN OF A LOT (KNOW VARIANCE)
UNE 66049:1978 ESTIMATION OF THE MEAN OF A LOT (VARIANCE UNKNOWN)

NL-NEN

NEN 10804-1994 Integrating-averaging sound level meters(IEC 804:1985+A1:1989)
NEN 10804/A2-1994 Integrating-averaging sound level meters (IEC804:1985/A2:1993)

VN-TCVN

TCVN 2372-1987 Raw silk.Method for determination of mean uniformity and minimum uniformity
TCVN 3649-2007 Paper and board.Sampling to determine average quality

Association Francaise de Normalisation

NF A04-504*NF EN ISO 2624:1995 Copper and copper alloys. Estimation of average grain size.
NF Q03-009:1996 Paper and board. Sampling to determine average quality.
NF Q03-009*NF EN ISO 186:2002 Paper and board - Sampling to determine average quality.

US-DOT

DOT 49 CFR PART 525-2010 EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS
DOT 49 CFR PART 531-2010 PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS

PT-IPQ

NP 3792-1988 Paper Determination of bulking thickness and apparent density

ESDU - Engineering Sciences Data Unit

ESDU 69023 D-1989 Average gust frequencies. Subsonic transport aircraft.
ESDU 91043 C-2011 Mean wind speeds over hills and other topography
ESDU 84015 A-2012 Cylinder groups: mean forces on pairs of long circular cylinders
ESDU 91043 C-1993 Mean wind speeds over hills and other topography.

PL-PKN

PN Z04002 Arkusz 05-1974 Air purity protection Tests of dust physical properties Determination of average porosity and average kinecic size of dust particles
PN P50080-1991 Paper and board.Sampling to determine average quality
PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles

CU-NC

NC 92-13-1987 Quality Control. Estimation of the Mean. Confidence Interval

American Society for Testing and Materials (ASTM)

ASTM E112-96e3 Standard Test Methods for Determining Average Grain Size
ASTM E112-12 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e1 Standard Test Methods for Determining Average Grain Size
ASTM E112-24 Standard Test Methods for Determining Average Grain Size
ASTM E112-10 Standard Test Methods for Determining Average Grain Size
ASTM E112-13 Standard Test Methods for Determining Average Grain Size
ASTM E112-96(2004)e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size

US-FCR

FCR COE HL-92-9 FINAL REPORT-1992 DEPTH-AVERAGED NUMERICAL MODELING FOR CURVED CHANNELS

YU-JUS

JUS B.E8.310-1989 Glass. Determinaticm of coefficient of tean linear ternal expansion
JUS H.N8.212-1991 Paper and boar?. Sampling to determinc. avaragc. qxial1ty

KR-KS

KS M ISO 186-2020 Paper and board — Sampling to determine average quality
KS K 0438-2019(2024) Measuring method for average degree of polymerization of rayon yarn

CEN - European Committee for Standardization

EN ISO 186:1996 Paper and Board - Sampling to Determine Average Quality

IN-BIS

IS 1377-1971 Method for determination of average fiber length of wool
IS 4748-1968 Methods for estimating average grain size of metals

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD16-A-1995 Assessment of Average Outgoing Quality Levels in Parts Per Million (PPM)