Thin film battery testing

Thin film battery testing, Total:119 items.

The international standard classification for "Thin film battery testing" includes: Solar energy engineering , Other insulating materials , Other products of non-ferrous metals , Packaging materials and accessories , Glass products , Films and sheets , Plastics and rubber insulating materials , Fuel cells .

The Chinese standard classification for "Thin film battery testing" includes: Technical management , Electrical insulating material and its products , Heavy metals and their alloys , Packaging method , Industrial technical glass , Basic standards and general methods for synthetic resin and plastic , Electrochemical power source , Radio Measurement .

Professional Standard - Energy

NB/T 10827-2021 Test method for ionic conductivity of solid-state electrolytes for solid-state batteries
NB/T 11226-2023 Zinc-nickel flow battery separator test method
NB/T10827-2021 Test method for ionic conductivity of power battery thin films

Group Standards of the People's Republic of China

T/CIET 190-2023 Guidelines for Carbon Footprint Evaluation of Solar Thin Film Cell Products
T/XAI 12-2021 The method for electrical testing of COF tape
T/CSPSTC 28-2019 Acceptance specification for thin film solar new factory
T/CSPSTC 26-2019 Guidelines for construction of thin film solar cell factory
T/ZZB 2854-2022 UV insulating films of crystalline silicon photovoltaic modules—polyethylene terephthalate films
T/ZZB 1790-2020 Sputter equipment for Cu-In-Ga-Se thin film solar cells
T/SHPTA 024.2-2022 Polyester film for photoelectric display Part?2?Polyester?Film?for?Brightness?Enhancement?Film
T/FSPIA 01-2024 Polyester film white film for electrical insulation
T/GDASE 0010-2020 Determination of Electron Mobility in Graphene Thin Films
T/ZBH 022-2023 Transparent conductive oxide (SnO2:F) glassfor Thin-film solar cells
T/CIET 536-2024 Conductive film for photovoltaic cells
T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
T/CIET 228-2023 Detection methods for retired lithium batteries
T/CEC 727-2022 Testing specification for thin-film components of household photovoltaic power generation system
T/CSPSTC 27-2019 General requirements for site selection of thin film solar cell new factory
T/SHPTA 024.3-2022 Polyester film for photoelectric display Part?3?Polyester?Film?for?OCA?Release?Film
T/SHPTA 024.1-2022 Polyester film for photoelectric display Part?1?Polyester?Film?for?Diffuser?Film

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39160-2020 Cadmium zinc telluride target for thin-film solar cells
GB/T 36289.1-2018 Insulating films of crystalline silicon photovoltaic(PV) modules-Part 1:Polyethylene terephthalate films
GB/T 19789-2021 Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor
GB/T 38785-2020 General technical requirements of thin-film photovoltaic modulerecycling and reusing for use in building

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19789-2005 Packaging materials—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor
GB/T 20042.5-2009 Proton exchange membrane fuel cell - Part 5: Test method for membrane electrode assembly
GB/T 36289.2-2018 Insulating films of crystalline silicon photovoltaic (PV) modules-Part 2:Fluorine plastic films
GB 51370-2019 Standard for design of thin film solar cell plant
GB 12802.2-2004 Film for electrical insulation Part 2:Polythylene terephthalate film used for electrical insulation
GB/T 26253-2010 Determination of water vapour transmission rate for plastics-film and sheeting—Infrared detection sensor method
GB/T 12802.2-2004 Film for electrical insulation—Part 2:Polythylene terephthalate film used for eletrical insulation
GB/T 13542.4-2009 Film for electrical insulation - Part 4: Polythylene terephthalate film used for electrical insulation
GB/Z 27753-2011 Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
GB/T 13542.6-2006 Film for electrical insulation - Part 6: Polyimide films for electrical insulation
GB/T 41744-2022 Substrate glass for copper indium gallium selenide thin film solar cell

Professional Standard - Light Industry

QB/T 5964-2023 Polyamide（nylon）film for lithium-ion battery packaging

National Metrological Verification Regulations of the People's Republic of China

JJG 357-1984 the Thin Film Thermoelectric Power Meter Type 6460
JJG 282-1981 Verification Regulation of Coaxial Thin Film Thermoelectric {ower Head

未注明发布机构

ASTM RR-E35-1009 2014 E2945-Test Method for Film Permeability Determination Using Static Permeability Cells
DIN 53370 E:2002-04 Testing of plastic films; determination of the thickness by mechanical feeling

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 5463-2005 Verification regulation for measurement equipment of optical film refractive index and thickness

Military Standard of the People's Republic of China-General Armament Department

GJB 8687-2015 Calibration procedures for optical film refractive index and thickness testers

Taiwan Provincial Standard of the People's Republic of China

CNS 10591-1986 Method of Test for Plastic Films for Food Packaging

国家能源局

NB/T 42146-2018 Zinc bromine flow battery. Test methods of electrode、membrane and electrolyte

BE-NBN

NBN-HD 211.2 S9-1993 Primary batteries. Part 2: Specification sheets

German Institute for Standardization

DIN 53366:1983 Testing of plastic films and sheetings; determination of blocking strength
DIN 50957:1978 Testing of electrolytes used for electro-deposited metallic coatings; test involving electro-deposition of a coating in the Hull cell, general principles
DIN 16995:2016-04 Films for packaging - Plastic films - Properties, testing
DIN 55543-4:2010 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of polyethylene films
DIN 53369:1976 Testing of plastic films; determination of the shrinking stress
DIN 16995:2016 Films for packaging - Plastic films - Properties, testing
DIN 16995:2009 Films for packaging - Plastic films - Properties, testing
DIN 53373:1970 Testing of Plastic Films; Impact Penetration Test with Electronic Data Recording
DIN 53377:1969 Testing of Plastic Films; Determination of Dimensional Stability
DIN 53370:2006 Testing of plastics films - Determination of the thickness by mechanical scanning
DIN 53370:1976 Testing of plastic films; determination of the thickness by mechanical feeling
DIN EN 165000-2 Berichtigung 1:1997 Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests
DIN EN 165000-2:1996-11 Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests; German version EN 165000-2:1996
DIN EN ISO 11502:2005 Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:1995); English version of DIN EN ISO 11502

Korean Agency for Technology and Standards (KATS)

KS M ISO 5989:2002 Photography－Pre－packaged chemicals for the processing of silver halide based photographic materials－Vocabulary
KS M ISO 23559:2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 23559:2014 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 15106-3-2008(2018) Plastics－Film and sheeting－Determination of water vapour transmission rate－Part 3：Electrolytic detection sensor method
KS C 2344-2003(2018) Polyester film for electrical use
KS C 2344-2003 Polyester films for electrical purposes

International Organization for Standardization (ISO)

ISO 15989:2004 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films
ISO 1325:1973 Plastics — Determination of electrical properties of thin sheet and film
ISO 23559:2007 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 2185:1972 Muscovite mica blocks, thins and films - Visual classification
ISO 15989:2004/cor 1:2007 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films; Technical Corrigendum 1
ISO 8173:1986 Light olefins for industrial use; Determination of molecular oxygen in gaseous phase; Electrochemical method with a membrane- covered cell

TR-TSE

TS 2367-1976 MUSCOVITE MICA BLOCKS, THINS AND FILMS - V?SUAL CLASSIFICATION

British Standards Institution (BSI)

BS ISO 23559:2011 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
PD IEC TS 62804-2:2022 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Thin-film
BS EN IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
BS EN 60674-2:2017+A1:2019 Specification for plastic films for electrical purposes - Methods of test

United States Navy

NAVY MIL-B-6937-1950 BATTERY TESTER

SCC

BS PD IEC TS 62804-2:2022 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation-Thin-film
DIN 16995 E:2015 Draft Document - Films for packaging - Plastic films - Properties, testing
06/30130313 DC ISO 23559. Plastics. Film and sheeting. Guide for the testing of thermoplastic films
DANSK DS/IEC TS 62804-2 ED1:2022 Photovoltaic (PV) modules – Test methods for the detection of potential-induced degradation – Part 2: Thin-film
BS ISO 23559:2007 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films

KR-KS

KS M ISO 23559-2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS C 2344-2003(2023) Polyester film for electrical use

ZA-SANS

SANS 10125:1976 The installation of flexible membrane linings in earth embankment reservoirs

Association Francaise de Normalisation

NF T13-005:1975 Muscovite mica blocks, thins and films. Visual classification.
NF EN 17271:2019 Plastics - Profiles based on poly(vinyl chloride) (PVC) - Determination of the peel resistance of profiles with laminated films
NF T54-803-1:1994 Plastics. Plasticized polyvinyl chloride membranes for swimming-pools. Specifications and test methods. Part 1 : simple membranes.
NF T54-803-2:1994 Plastics. Plasticized polyvinyl chloride membranes for swimming-pools. Specifications and test methods. Part 2 : reinforced membranes.
NF C57-105-1-3*NF EN IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3 : special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
NF T54-114:2005 Plastics - Film and sheeting - Determination of blocking resistance.
NF C96-500-2*NF EN 165000-2:1996 Film and hybrid integrated circuits - Part 2 : internal visual inspection and special tests

Danish Standards Foundation

DS/EN ISO 15106-3:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method
DS 2217:1992 Water quality. Determination of the number of bacteria at 37 Centigrades in swimming pool water. Membran filtration method
DS/EN 165000-2:1997 Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests

GSO

BH GSO ISO 15989:2016 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films
GSO ISO 15989:2013 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films
GSO IEC TS 62804-2:2024 Photovoltaic (PV) modules - Test methods for the detection of potential-induced degradation - Part 2: Thin-film
GSO ISO 23559:2022 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
BH GSO ISO 23559:2023 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films

American Society for Testing and Materials (ASTM)

ASTM F2187-02 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM F2188-02 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM D7877-14 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
ASTM F390-11 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM F1595-00(2012) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
ASTM F1595-00(2005) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

Lithuanian Standards Office

LST EN 165000-3-2001 Film and hybrid integrated circuits. Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers
LST EN ISO 15106-3:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)
LST EN 165000-2-2001 Film and hybrid integrated circuits. Part 2: Internal visual inspection and special tests

NL-NEN

NEN 6573-1987 Bacteriological examination of water Examination by means of membrane filtration on the presence and the number of colony forming units (CFU) Pseudomonas aeruginosa

American National Standards Institute （ANSI)

ANSI/EIA 479-A:1993 Film-Paper, Film Dielectric Capacitors for 50/60 Hz Voltage Doubler Power Supplies

Electronic Components, Assemblies and Materials Association

ECA 479-A-1993 Film-Paper, Film Dielectric Capacitors for 50/60 Hz Voltage Doubler Power Supplies

AENOR

UNE-EN ISO 15106-3:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)

ECIA - Electronic Components Industry Association

401-1973 Paper@ Paper/Film@ Film Dielectric Capacitors for Power Semiconductor Applications

CZ-CSN

CSN 35 8320-1974 Polyester film capacitors

International Electrotechnical Commission (IEC)

IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules

ES-UNE

UNE-EN 165000-2:1996 Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests

CEN - European Committee for Standardization

EN ISO 11502:2018 Plastics - Film and sheeting - Determination of blocking resistance

RU-GOST R

GOST 17035-1986 Plastics. Method for measuring thickness of plastic films and sheets