Material Spectroscopy

Material Spectroscopy, Total:437 items.

The international standard classification for "Material Spectroscopy" includes: Chemical analysis , Advanced ceramics , Other standards related to analytical chemistry , Wood-based panels , Radiation protection , Optical equipment , Refractories , Medical Sciences and health care facilities in general , Geology. Meteorology. Hydrology , Optical measuring instruments , Essential oils , Paper and board , Materials for aerospace construction , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "Material Spectroscopy" includes: Basic standards and general methods , Special ceramics , Fireproof material in general , Timber and processed timber , Electrochemical, thermochemistry and optical profile type analyzer , Radiological sanitation protection , Electron optics and other physical optics instrument , Oceanology , Fragrances and flavors , Papermaking in general , Paper , Composite materials and solid fuels , Petroleum extraction , Basic standard and general method on forestry , Safety, hygiene and labor protection .

Professional Standard - Electron

SJ/Z 3206.2-1989 Laser source and its performance requirements for determination of emision spectrum
SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum
SJ/Z 3206.12-1989 General rules for emission spectrum analysis for vacuum materials
SJ/Z 3206.13-1989 General rules for emision spectrum analysis for semiconductor materials
SJ 20744-1999 General rule of infrared absorption spectral analysis for the impurity concentration in semiconductor materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis
GB/T 41074-2021 Microbeam analysis―Method of specimen preparation for analysis of general powders using WDS and EDS
GB/T 41072-2021 Surface chemical analysis - Electron spectroscopies - Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 41073-2021 Surface chemical analysis―Electron spectroscopies―Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
GB/T 38359-2019 Data-analysis methods of strength properties for structural wood and wood-based products
GB/T 29732-2021 Surface chemical analysis—Medium resolution auger electron spectrometers—Calibration of energy scales for elemental analysis
GB/T 21114-2019 Refractories—Chemical analysis by X-ray fluorescence(XRF)—Fused cast-bead method
GB/T 36402-2018 Thermal analysis-mass spectrometry coupling method for ceramics materials

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21114-2007 Chemical analysis of refractory products by XRF—Fused cast bead method
GB/T 20726-2015 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy dispersive X-ray spectrometers for use in electron probe microanalysis
GB/T 42256-2022 Determination of ruthenium-106 in seawater─Gamma spectrometry
GB/T 2679.11-1993 Paper and board―Qualitative analysis of mineral filler and mineral coating―SEM/EDAX method
GB/Z 32494-2016 Surface chemical analysis—Auger electron spectroscopy—Derivation of chemical information
GB/T 25189-2010 Microbeam analysis—Determination method for quantitative analysis parameters of SEM-EDS
GB/T 30702-2014 Surface chemical analysis—Auger electron spectroscopy and X-ray photoelectron spectroscopy—Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
GB/T 16141-1995 Analytical method for radionuclides by alpha spectrometry
GB/T 16140-1995 Gamma spectrometry method for analysis of radionuclides in water
GB/T 30704-2014 Surface chemical analysis―X-ray photoelectron spectroscopy―Guidelines for analysis
GB/T 11743-2013 Determination of Radionuclides in Soil by Gamma Spectrometry
GB/T 5070-2015(英文版) Chemical analysis of refractories containing chrome
GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
GB/T 29556-2013 Surface chemical analysis—Auger electron spectroscopy and X-ray photoelectron spectroscopy—Determination of lateral resolution,analysis area, and sample area viewed by the analyser
GB/T 2679.11-2008 Paper and board - qualitative analysis of mineral filler and mineral coating - SEM/EDAX method
GB/T 26533-2011 General rules for Auger electron spectroscopic analysis
GB/T 17359-2023 Microbeam analysis—Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
GB/T 15244-2013 Microbeam analysis—Quantitative analysis of silicate glass by wavelength dispersive X-ray spectrometry and energy dispersive X-ray spectrometry
GB/T 11539-2008 Fragrance/Flavor substances - Analysis by gas chromatography on packed columns - General method
GB/T 29731-2013 Surface chemical analysis—High-resolution Auger electron spectrometers—Calibration of energy scales for elemental and chemical-state analysis
GB/T 28632-2012 Surface chemical analysis—Auger electron spectroscopy and X-ray photoelectron spectroscopy—Determination of lateral resolution
GB/T 17359-2012 Microbeam analysis - Quantitative analysis using energy dispersive spectrometry
GB/T 11713-2015 General analytical methods of high-purity germanium gamma spectrometer

Taiwan Provincial Standard of the People's Republic of China

CNS 11414-1985 Method of Chemical Analysis for Tungsten and Molybdenum Material
CNS 14341-1999 Optical spectrum analyzer
CNS 624-1956 Method of Chemical Analysis for Refractory Material
CNS 10005-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Metallic Materials

Professional Standard - Aviation

HB/Z 208-1991 Specification for sampling of test samples for spectroscopic analysis of nonferrous metal materials
HB 7615-1998 Constituent and Pre-curing Degree of Composite Material Resin Matrix - Analysis Method of High Performance Liquid Chromatography

Professional Standard - Building Materials

JC/T 2019-2010 Thermal analysis - Mass spectrometry coupling method for ceramics

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2079-2013 Polyvinyl chloride (PVC) cable material analysis - infrared spectroscopy
DB21/T 2070-2013 Chemical Analysis of Aluminosilicate Refractories by Atomic Absorption Spectrometry

Professional Standard - Petroleum

SY/T 6189-1996 Quantitative Analysis of Energy Spectra for Minerals in Rocks
SY/T 5252-2002 Natural gamma spectrographic method of analysing for core sample
SY/T 6189-2018 Quantitative analysis method for rock minerals by X-ray energy spectrum (EDS)

Group Standards of the People's Republic of China

T/CSTM 00229-2020 Identification of graphene materials in coatings materials Scanning Electron Microscope-Energy Dispersive Spectrometer method
T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
T/CNIA 0109-2021 General rules for the application of laser-induced breakdown spectroscopy for the analysis of non-ferrous metal materials
T/CNTAC 70-2020 Quantitative detection for graphene materials in fibers - Elemental analysis method
T/CECPA 007-2022 Review for Fuel Rod Analysis Software

Professional Standard - Public Safety Standards

GA 132-1996 Material smoke toxicity analysis

Professional Standard - Forestry

LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood
LY/T 2053-2012 Standard method for near infrared qualitative analysis of wood

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry

Professional Standard - Commodity Inspection

SN/T 3481.1-2013 Food contact materials - Polymer materials - Determination for hexabromocyclododecane - Part 1: Liquid chromatography(LC) - mass spectrometry(MS)/MS method
SN/T 4765-2017 Food contact materials—Polymers—Determination of hexachloro-1,3-butadiene—Gas chromatography-mass spectrometry
SN/T 3938-2014 Food contact materials - Polymers - Determination of organotin compounds - Gas chromatography-mass spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 16140-2018 Determination of radionuclides in water by gamma spectrometry
GB/T 34333-2017 Refractory products--Determination by inductively coupled plasma atomic emission spectrometry(ICP-AES)

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 4489-2022 Identification method of natural colored cotton EDS energy spectrum analysis method

Professional Standard - Hygiene

WS/T 184-1999 Gamma spectrometry method of analysing radionuclides in air

Professional Standard - Railway

TB/T 2946-1999 Analysis of Pyrolysis Gas Toxicity of Materials

(U.S.) Ford Automotive Standards

FORD FLTM EU-AZ 053-1-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
FORD FLTM EU-AZ 053-01-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS

RU-GOST R

GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
GOST R 54153-2010 Steel. Method of atomic emission spectral analysis
GOST R 54032-2010 Food products, feeds, food raw materials. Method of determination of beta-agonists by gas chromatography with mass spectrometry detector
GOST 12223.0-1976 Iridium. Method of spectral analysis
GOST 14316-1991 Molybdenum. Spectrum analysis methods
GOST 14339.5-1991 Tungsten. Methods of spectral analysis
GOST 12227.0-1976 Rodium. Method of spectral analysis
GOST 8776-1979 Cobalt. Methods of chemical-atomic-emission spectral analysis

Korean Agency for Technology and Standards (KATS)

KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS D 1680-1993 General rules for photographic emission spectrochemical analysis of metal materials
KS D 1650-1993 General rules for photoelectric emission spectrochemical analysis of metal materials
KS D 1657-1981 Analysis method of photoelectric emission spectrochemical analysis of metal materials
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
KS D ISO 18118-2020 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS M 1079-2008 Determination of PCNs and PCTs in polymer by GC/MS
KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D 1680-2008(2018) General rules for photographic emission spectrochemical analysis of metal materials
KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 17973-2021 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D 1650-2008(2018) General rules for photoelectric emission spectrochemical analysis of metal materials
KS D ISO 22309-2021 Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D ISO 19319-2020 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D ISO 17973-2011(2016) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS L ISO 26845-2022 Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS L 3128-2-2012 Chemical analysis of refractory products-Part 2:Silica refractories
KS D ISO 19319:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
KS D 2608-2015 Methods for chemical analysis of molybdenum materials
KS D 2607-1993 Methods for chemical analysis of tungsten materials
KS D 2607-2020 Methods for chemical analysis of tungsten materials
KS D 2608-1993 Methods for chemical analysis of molybdenum materials
KS D 2608-2020 Methods for chemical analysis of molybdenum materials
KS D 2607-2015 Methods for chemical analysis of tungsten materials
KS L 3128-5-2012 Chemical analysis of refractory products-Part 5:Chrome-magnesia refractories
KS D 2608-2005 Methods for chemical analysis of molybdenum materials
KS D 2607-2005 Methods for chemical analysis of tungsten materials
KS D ISO 17974-2021 Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS B ISO 10564:2005 Soldering and brazing materials－Methods for the sampling of soft solders for analysis
KS L 2316-2010(2020) Volumetric glass material for chemical analysis
KS B ISO TR 14936-2003(2018) Strain rate analysis report of metallic materials
KS D 1949-1999 Method for determination of tungsten in nickel materials for electron tubes
KS B ISO TR 14936:2003 Metallic materials－Strain analysis report
KS D 1976-1982 Methods for determination of manganese in nickel materials for electron tubes
KS D 1976-2002 Methods for determination of manganese in nickel materials for electron tubes
KS D 1813-2003(2018) Chemical analysis of ferrous materials determination of lead in steels－Flame atomic absorption spectrometric method
KS L 3410-1995 Chemical analysis for high purity carbon materials
KS L 3137-1986 Chemical analysis of zircon refractories
KS D 2589-2005 Methods for chemical analysis of gold brazing filler metals
KS D 1813-2023 Chemical analysis of ferrous materials determination of lead in steels－Flame atomic absorption spectrometric method
KS L 3137-2006 Chemical analysis of zircon refractories
KS L ISO 26845:2012 Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS B ISO 10564-2021 Soldering and brazing materials－Methods for the sampling of soft solders for analysis
KS L 3128-3-2012 Chemical analysis of refractory products-Part 3:High alumina refractories
KS L 4005-2021 Sieve analysis of nonplastic ceramic materials
KS L 4005-2006(2021) Sieve analysis of nonplastic ceramic materials
KS D 2052-1999(2004) METHODS FOR CHEMICAL ANALYSIS OF TUNGSTEN AND MOLYBDENUM ALLOY MATERIALS
KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
KS L 2316-2020 Volumetric glass material for chemical analysis
KS L 2316-1995 Volumetric glass material for chemical analysis
KS L 5208-1986 Chemical analysis of chrome ore for refractories
KS L 5208-2016 Chemical analysis of chrome ore for refractories
KS L 3410-2020 Chemical analysis for highly purity graphite materials
KS L 3137-2016(2021) Chemical analysis of zircon refractories
KS D ISO 17974-2011(2016) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 17973-2011(2021) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 15470-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS B 0539-2005 Methods for chemical analysis of palladium brazing filler metals
KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot

GSO

OS GSO ISO 18554:2017 Surface chemical analysis -- Electron spectroscopies -- Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
GSO ISO 18554:2017 Surface chemical analysis -- Electron spectroscopies -- Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
GSO ISO 18118:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
OS GSO ISO 18118:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BH GSO ISO 18118:2016 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
OS GSO ISO 10810:2013 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis
GSO ISO 10810:2013 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis
BH GSO ISO 10810:2016 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Guidelines for analysis
GSO ISO 13465:2013 Nuclear energy -- Nuclear fuel technology -- Determination of neptunium in nitric acid solutions by spectrophotometry
GSO ISO 24639:2024 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
GSO ISO 17973:2013 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
BH GSO ISO 17973:2016 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
OS GSO ISO 17973:2013 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
GSO ISO 26845:2015 Chemical analysis of refractories -- General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
GSO ISO 13424:2015 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of results of thin-film analysis
OS GSO ISO 13424:2015 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of results of thin-film analysis
BH GSO ISO 13424:2017 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Reporting of results of thin-film analysis
OS GSO ISO 17974:2014 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis
GSO ISO/TR 14936:2013 Metallic materials -- Strain analysis report
BH GSO ISO 17974:2016 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis
BH GSO ISO 18516:2016 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution
GSO ISO 18516:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution
OS GSO ISO 18516:2013 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution
GSO ISO 15472:2013 Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales
BH GSO ISO/TR 14936:2016 Metallic materials -- Strain analysis report
OS GSO ISO/TR 14936:2013 Metallic materials -- Strain analysis report
BH GSO ISO 19830:2017 Surface chemical analysis -- Electron spectroscopies -- Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
OS GSO ISO 16129:2014 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BH GSO ISO 23812:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials
BH GSO ISO 16129:2015 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
GSO ISO 19830:2016 Surface chemical analysis -- Electron spectroscopies -- Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
BH GSO ISO 26845:2017 Chemical analysis of refractories -- General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

PL-PKN

PN H04155-09-1986 Chemical analysis of silica raw materials and refractory products Method spectrographic
PN P50092-1992 Raw materials for the paper industry. Pulpwood. Chemical analysis
PN EN 10181-1992 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
PN EN 10177-1993 Chemical analysis of ferrous materials Determination of calcium in steels Flame atomie absorption spectrometric method
PN EN 10188-1992 Chemical analysis of ferrous materials Determination of chromi um in steels and irons Flame atomie absorption spectrometric inethod

Association Francaise de Normalisation

NF T70-310:1995 Energetic materials for defense. Physical-chemical analysis and properties. Hexogene of single and multibases materials. Method by liquid chromatography.
NF B49-418:1970 Chemical analysis of refractory materials (high). Silica materials, siliceous fireclay and fireclay materials. Determination of lithium, potassium and sodium (flame photometric method).
NF T70-304:1995 Energetic material for defense. Physical-chemical analysis and properties. Centralite and plasticizers of materials with nitroglycerine. Method by gaz chromatography.
NF T70-303:1995 Energetic materials for defense. Physical-chemical analysis and properties. 2-nitrodiphenylamine of single and multibases materials. Method by liquid chromatography.
NF T70-301:1995 Energetic materials for defense. Physical-chemical analysis and properties. Stabilizers and plasticizers of materials without nitroglycerine. Method by gaz chromatography.
NF T70-311:1995 Energetic materials for defense. Physical-chemical analysis and properties. Stabilizers, plasticizers, nitroglycerine of multibases materials. Method by liquid chromatography.
NF T70-353:2007 Energetic materials for defence - Physico-chemical analysis and properties - Centralite in single and double base materials, method by liquid chromatography.
NF T70-356:2007 Energetic materials for defence - Physical-chemical analysis and properties - Hygroscopicity of materials
NF T70-306:1995 Energetic materials for defense. Physical-chemical analysis and properties. Diphenylamine and nitrated derivatives of single and double base materials. Method by liquid chromatography.
NF T70-354:2007 Energetic materials for defence - Physico-chemical analysis and properties - Di-2 ethylhexylphtalate in single and multibase materials - Method by gas chromatography
NF T70-357:2007 Energetic materials for defence - Physico-chemical analysis and properties - Determination of metallic elements by atomic absorption spectrophotometry
NF T70-314:2004 Energetic materials for defense - Physical-chemical analysis and properties - Compression properties
FD CEN/TR 14823:2006 Durabilité du bois et des matériaux dérivés du bois - Analyse quantitative du pentachlorophénol dans le bois - Méthode par chromatographie en phase gazeuse
NF T70-315:2004 Energetic materials for defense - Physical-chemical analysis and properties - Tensile properties.
NF T70-315:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE PROPERTIES.
NF T70-363:1996 Energetic materials for defense. Physico-chemical analysis and properties. Freeness. Gravity method.
NF ISO 14237:2010 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Determination of boron atoms in silicon using uniformly doped materials
NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
NF T70-329:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE CREEP.
NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire
NF T70-314:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. COMPRESSION PROPERTIES.
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF T70-329:2003 Energetic materials for defense - Physical-chemical analysis and properties - Tensile creep
FD A06-326*FD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al in ferro-silicon by X-ray fluorescence spectrometry
NF B49-414:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of titanium.
NF T51-506:2011 Plastics - Thermosetting resins - Analysis by liquid chromatography (HPLC)
NF B49-415:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of manganese.
NF B49-411:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of silicon (method by insolubilisation in hydrochloric acid medium).
NF B49-413:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of iron.
NF T70-321:1995 Energetic materials for defense. Physical-chemical analysis and properties. Nitroglycerine, bttn and 2-ndpa in high explosives. Method by liquid chromatography.
NF T70-336:2013 Energetic materials for defense - Physical-chemical analysis and properties - Microhardness
NF B49-416:1969 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of phosphorus.
NF T70-322:1995 Energetic materials for defense. Physical-chemical analysis an dproperties. N-methyl-4 nitro-aniline (mna) in high explosives. Method by liquid chromatography.
NF B49-412:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of aluminium.
NF T70-364:2003 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives.
NF T70-336:1995 Energetic materials for defense. Physical-chemical analysis and properties. Microhardness
NF T70-364:2014 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives
NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
NF T70-300:2007 Energetic materials for defence - Physico-chemical analysis and properties - Moisture of materials Karl Fischer volumetric method.
NF T70-330:2003 Energetic materials for defense - Physical-chemical analysis and properties - Tensile stress relaxation.
NF A08-361:1989 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method.
NF T70-330:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE STRESS RELAXATION.
NF B49-417:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of calcium and magnesium.
FD A06-325*FD CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
NF B40-672*NF EN ISO 26845:2008 Chemical analysis of refractories . General requirements for wet chemicals analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
NF T70-320:1995 Energetic materials for defense. Physical-chemical analysis and properties. Octogen in hexogen and hexogen in octogen. Method by liquid chromatography.
NF T70-316:1995 Energetic materials for defense. Physical-chemical analysis and properties. Shore hardness.
NF T70-366:2003 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, normal traction.

SCC

BS 3156-4:1969 Analysis of fuel gases-Gas chromatographic analysis
BS ISO 18118:2004 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
SN-CEN/TR 10354:2011 Chemical analysis of ferrous materials — Analysis of ferro-silicon — Determination of Si and Al by X-ray fluorescence spectrometry
DANSK DS/CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
BS PD CEN/TR 10354:2011 Chemical analysis of ferrous Materials. Analysis of ferro-silicon. Determination of Si and Al by X-ray fluorescence spectrometry
NS 4783:1988 Water analysis — Metal content of biological material determined by atomic absorption spectrometry
BS ISO 22309:2006 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS)
BS PD ISO/TR 19319:2003 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution, analysis area, and sample area viewed by the analyser
SN-CR 10321:2003 Chemical analysis of ferrous materials — Recommendations for the drafting of standard methods of analysis employing flame atomic absorption spectrometry for the chemical analysis of iron and steel
09/30191895 DC BS ISO 10810. Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS 1902-2.2:1974 Methods of testing refractory materials. Chemical analysis (wet methods)-Chemical analysis of chrome-bearing materials
ASD-STAN prEN 6040:1970 Non-metallic materials - Test method - Analysis of thermoset systems by High Performance Liquid Chromatography (HPLC)
SN-CEN/TR 10353:2011 Chemical analysis of ferrous materials — Analysis of ferro-silicon — Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
BS ISO 17973:2002 Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
DIN 55673 E:2016 Draft Document - Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
BS 1902-2B:1967 Methods of testing refractory materials-Chemical analysis of aluminous materials
NS-EN 10177:1989 Chemical analysis of ferrous materials — Determination of calcium in steels — Flame atomic absorption spectrometric method
AENOR UNE 36320-1:1989 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
BS PD CEN/TR 10353:2011 Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
SN-CEN/TR 10362:2014 Chemical analysis of ferrous materials — Determination of selenium in steels — Electrothermal atomic absorption spectrometric method
AENOR UNE 36339-1:1989 Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method
NS-EN 10181:1989 Chemical analysis of ferrous materials — Determination of lead in steels — Flame atomic absorption spectrometric method
DANSK DS/CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
BS 1902-2C:1969 Methods of testing refractory materials. Chemical analysis of chrome bearing materials
BS 1902-2C:1967 Methods of testing refractory materials. Chemical analysis of chrome bearing materials
ISO 17109:2015/DAmd 1 Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films — A...
BS EN 61290-1-1:1998 Optical spectrum analyzer
NS-EN 10136:1989 Chemical analysis of ferrous materials — Determination of nickel in steels and irons — Flame atomic absorption spectrometric method
AENOR UNE 36326-1:1989 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
NS-EN 10188:1989 Chemical analysis of ferrous materials — Determination of chromium in steels and irons — Flame atomic absorption spectrometric method
NS-EN 10211:1995 Chemical analysis of ferrous materials — Determination of titanium in steel and iron — Flame atomic absorption spectrometric method
AENOR UNE 36324-1:1991 Chemical analysis of ferrous materials - Determination of chromium in steels and irons - Flame atomic absorption spectrometric method
SPC GB/T 5069-2015
DANSK DS/CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
SPC GB/T 5070-2015
06/30153824 DC ISO 26845. Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma methods
DANSK DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

International Organization for Standardization (ISO)

ISO 18118:2024 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO 10810:2010 Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
ISO 19668:2017 Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials
ISO/DIS 17973:2023 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO/TR 19319:2003 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area, and sample area viewed by the analyser
ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)
ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
ISO 10564:1993 Soldering and brazing materials; methods for the sampling of soft solders for analysis
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO/TR 14936:1998 Metallic materials - Strain analysis report
ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 19830:2015 Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
ISO/CD 14719:2023 Chemical analysis of refractory material glass and glazes

GOSTR

GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis

British Standards Institution (BSI)

BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
BS ISO 18118:2024 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 18118:2015 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS 1902-9.2:1987 Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of silica refractories by X-ray fluorescence
BS ISO 10810:2019 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS 7819:1995 Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials
BS ISO 17973:2016 Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS PD CEN/TR 10362:2014 Chemical analysis of ferrous materials. Determination of selenium in steels. Electrothermal atomic absorption spectrometric method
BS ISO 17974:2002(2010) Surface chemical analysis — High - resolution Auger electron spectrometers — Calibration of energy scales for elemental and chemical - state analysis
BS ISO 18516:2006(2010) Surface chemical analysis — Auger electron spectroscopy and X - ray photoelectron spectroscopy — Determination of lateral resolution
23/30469291 DC BS ISO 17973. Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS EN 16274:2021 Method for analysis of allergens. Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry
BS EN 10177:2019 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS ISO 19830:2015 Surface chemical analysis. Electron spectroscopies. Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
BS ISO 16129:2018 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods
BS 1902 Sec.2.2:1974 Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials

German Institute for Standardization

DIN 55673:2000 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 55673:2017 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 53174-2:1992 Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method
DIN 55673 E:2016-11 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 55673:2017-04 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN ISO 15472 E:2019-09 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
DIN EN 10211:1996 Chemical analysis of ferrous materials – Determination of titanium in steel and iron — Flame atomic absorption spectrometric method
DIN EN 16274:2021-11 Method for analysis of allergens - Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry; German version EN 16274:2021
DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
DIN 55683:1994 Solvents for paints and varnishes - Determination of the solvents in coating materials containing organic solvents only - Gaschromatographic method
DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008

Japanese Industrial Standards Committee (JISC)

JIS Z 2611:1977 General rules for photoelectric emission spectrochemical analysis of metal materials
JIS Z 2612:1977 General rules for photographic emission spectrochemical analysis of metal materials
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
JIS R 7223:1997 Chemical analysis of graphite materials
JIS R 3504:1976 Glass material for chemical analysis
JIS H 1404:1987 Methods for chemical analysis of molybdenum materials
JIS H 1403:2001 Methods for chemical analysis of tungsten materials
JIS H 1404:2001 Methods for chemical analysis of molybdenum materials
JIS H 1403:1987 Methods for chemical analysis of tungsten materials

IT-UNI

UNI 4778-1961 Chemical analysis methods of metallic materials. Determination of thallium in cadmium. Polarography*
UNI 7726-1977 Chemical analysis of ferrous materials. Determination of antimony in steel. Spectrophotometric method with brillant green.
UNI 6779-1971 Methods for chemical analysis of ferrous metal materials. Determination of lead in zinc. Polarography
UNI 4770-1961 Chemical analysis methods of metallic materials. Determination of lead in cadmium. Gravimetric and polarographic methods*
UNI 3725-1956 Chemical analysis methods of metallic materials. Determination of lead in magnesium and magnesium alloys. Polarography
UNI 6778-1971 Methods for chemical analysis of ferrous metal materials. Determination of lead and cadmium in zinc. Polarography
UNI 3729-1956 Chemical analysis methods of metallic materials. Determination of zinc in magnesium and magnesium alloys. Polarography (Zn^0.05%)

American Society for Testing and Materials (ASTM)

ASTM E1257-93(2003) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1508-98 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-98(2003) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12a(2019) Standard guide for quantitative analysis using energy dispersive spectroscopy
ASTM E1508-12 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-98(2008) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12a Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E1257-16(2024) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM D6808-02(2018)e1 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
ASTM E1257-93(2008) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1257-93(1998)e1 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM D6621-00(2017) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM C697-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
ASTM D6621-00(2012) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM E1257-16 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E870-82(2006) Standard Test Methods for Analysis of Wood Fuels
ASTM C1221-92(1998) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM C1297-03 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C1297-18 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C1297-03(2011) Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM D6621-21 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

IN-BIS

IS 11148-1984 Spectrum Analyzer Performance

CZ-CSN

CSN 72 6026 Cast.14-1984 Refractories. Magnesite and magnesite-lime materials. Chemical analysis by AAS method
CSN 42 0615 Cast.12-1974 Chemical analysis of brazing alloys. Determination of lead by polarographic method
CSN 42 0616 Cast.6-1974 Chemical analysis of silver solders. Determination of cadmium by polarographic method
CSN 72 6070-1985 Refractories containing chromé and chro- mé ores. Chemical analysis by AAS method

Standard Association of Australia （SAA）

AS 2134:1978 Code of practice for the chemical analysis of materials by flame atomic absorption spectroscopy
AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
AS 2503.5:2003 Refractories and refractory materials - Chemical analysis - Chrome-bearing materials
AS 5388.2:2012 Forensic analysis - analysis and examination of materials
AS 4392.2:1997 Heavy mineral sands - Analysis by wavelength dispersive X-ray fluorescence spectrometry - Zircon materials
AS 2503.5:2003(R2013) Refractories and Refractory Chemical Analysis Chromium Containing Materials
AS 2503.5:1989 Refractories and refractory materials - Chemical analysis - Chrome-bearing materials
AS 2503.3:2006 Refractories and refractory materials - Chemical analysis - High alumina materials
AS 2503.3:1985 Refractories and refractory materials - Chemical analysis - High alumina materials
AS CK18:1970 Code of recommended practice for chemicla analysis of materials by atomic absorption spectroscopy
AS 2503.1:1981 Refractories and refractory materials - Chemical analysis - Silica refractory materials
AS 2503.1:1996 Refractories and refractory materials - Chemical analysis Part 1: Silica refractories
ISO 17973:2024 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
AS 2503.2:1983 Refractories and refractory materials - Chemical analysis - Aluminosilicate refractory materials
AS 2503.2:2006 Refractories and refractory materials - Chemical analysis - Aluminosilicate refractories
AS 2503.2:1996 Refractories and refractory materials - Chemical analysis Part 2: Aluminosilicate refractories

European Committee for Standardization (CEN)

CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
PD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
prEN 10201-1988 Chemical analysis of ferrous materials; determination of silicon in steel and iron; flame atomic absoption spectrometric method
CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
PD CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
EN 10177:1989 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
PD CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
EN 10188:1989 Chemical Analysis of Ferrous Materials Determination of Chromium in Steels and Irons Flame Atomic Absorption Spectrometic Method

SE-SIS

SIS SS-EN 10 184-1990 Chemical analysis of ferrous materials — Determination of phosfor in steels and irons — Spectrophotometric method
SIS SS 02 81 87-1986 Metal content of biological material determined by atomic absorption spectrometry — Digestion
SIS SS-EN 10 188-1990 Chemical analysis of ferrous materials — Determination of chromium in steels and irons — Flame atomic absorption spectro- metric method
SIS SS-EN 10 177-1989 Chemical analysis of ferrous materials — Determination of calcium in steels — Flame atomic absorption spectrometric method
SIS SS-EN 10 181-1989 Chemical analysis of ferrous materials — Determination of lead in steels — Flame atomic absorption spectrometric method

Danish Standards Foundation

DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
DS/EN 10136:1989 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
DS/CEN/TR 10353:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

GM North America

GM GM9745P-2003 Analyis of Wood Fiber Material

Defense Logistics Agency

DLA QPL-8971-10-2004 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE

NO-SN

NS 4783-1988 Water analysis - Metal content of biological material determined by atomic absorption spectrometry

DE-VDA

VDA 230-206 Teil 3-2007 Analyses of the stick-slip performance of material parts - Specific section - Plastic web: Plastic web against plastic web

RO-ASRO

STAS 1883-1974 TANNING MATERIALS Sampling and methods ol analysis
STAS SR 13313-1995 Chemical analysis of ferrous materials. Recommendation for the drafting of standard methods of analysis employing flame atomic absorption spectrometry for the chemical analysis of iron and steel
STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
STAS 1706/17-1971 CUPPER speelrochemical analysis
STAS 10274/2-1983 Solid fuck ASH ANALYSIS Quantitative spectral analysis of minor, rare and dispersed elements
STAS SR 13314-1995 Chemical analysis of ferrous materials. Operational guidelines for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron and steel
STAS SR EN 10177-1994 Chemical analysis of ferrous materials. Deternnination of calcium in steels. Flame atomic absorption spectrometric method

AR-IRAM

IRAM OFICIAL 12 514 N.I.O.-1958 Chemical analysis of refractory materials

American Gear Manufacturers Association

AGMA 99FTM14-1999 Effect of Material Defects on Gear Performance - a Case Study

API - American Petroleum Institute

API PUBL 4312-1979 NET ENERGY ANALYSIS OF ALCOHOL FUELS

Spanish Association for Standardization (UNE)

UNE 36320-1:1989 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
UNE 36339-1:1989 Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method
UNE 84226:1992 ESSENTIAL OILS. ANALYSIS BY GAS CHROMATOGRAPHY ON PACKED COLUMNS. GENERAL METHOD.
UNE 36326-1:1989 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method

U.S. Air Force

AIR FORCE A-A-59684 A-2009 OPTICAL SPECTRUM ANALYZER

BSI

BS ISO 17973:2024 Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis

Lithuanian Standards Office

LST EN 10177-2000 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
LST EN 10181-2000 Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method
LST EN 10136-2000 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method

IEC - International Electrotechnical Commission

IEC TR 61026:1991 Guidelines for Application of Analytical Test Methods for Thermal Endurance Testing of Electrical Insulating Materials (Edition 1.0)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 759-1984 Test procedures for semiconductor X-ray energy spectrometers

YU-JUS

JUS B.D8.210-1982 Refractories. Chemical analysis fired clay production, raw and high aluminium raw materials

South African Bureau of Standard

SANS 5567:1968 Spectrographic analysis of copper

BR-ABNT

ABNT P-EB-304-1969 "Spectral Analysis" Standard

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 28.5-1979 Methodes D'Essai Des Peintures Et Pigments Analyse Des Solvants Par Chromatographie - (Gaz-Liquide)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.1.440-1975 Analysis of Pre-Preg Materials for Gel Time

VN-TCVN

TCVN 6819-2001 Chrome contained refractory materials.Methods of chemical analysis

KR-KS

KS B ISO TR 14936-2003(2023) Strain rate analysis report of metallic materials
KS M 0025-2008(2023) General rules for mass spectrometric analysis

American Welding Society (AWS)

WRC 098:1964 Part 1: Failure Analysis Of PVRC Vessel No. 5: A Study Of Materials Properties And Fracture Development

SG-SPRING SG

SS ISO 10564:1993 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis

CN-STDBOOK

图书 A-4619 Material quality inspection and analysis technology

Others: Energy spectrum analysis,About Spectroscopy,Electron microscopy analysis,Spectroscopy Standard,ESEM,Electron spectroscopy,energy spectrum analysis,,Energy Spectrum Analysis Center,Spectroscopy data,Spectroscopy elements,x energy spectrum analysis,.Energy spectrum analysis,Energy Spectroscopy Analysis of Materials,Material Spectroscopy,spectral analysis,Energy material,What can energy spectrum analysis analyze,energy spectrum analysis