Pipeline Test Pressure Standards

Pipeline Test Pressure Standards, Total:149 items.

The international standard classification for "Pipeline Test Pressure Standards" includes: Pipeline components and pipelines , Pressure vessels, gas cylinders .

The Chinese standard classification for "Pipeline Test Pressure Standards" includes: Pressure vessel , Basic standard and general method , Pipeline fittings .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32270-2024 Pressure piping code—Power piping
GB/T 20801.5-2006 Pressure Piping Code – Industrial Piping-Part 5: Inspection and Testing
GB/T 38942-2020 Pressure piping code—Utility piping
GB/T 34275-2024 Pressure piping code—Transmission pipeline
GB/T 16805-1997 Pressure testing of liquid petroleum pipelines
GB/T 32270-2015 Pressure piping code―Power piping
GB/T 16805-2017 The pressure testing of steel pipelines for the transportation of petroleum， gas and highly volatile liquids
GB/T 20801.1~6-2020 Pressure piping specification for industrial piping (6 volumes in total)
GB/T 16805-2009 Pressure testing of liquid petroleum pipelines
GB/T 20801.5-2020 Pressure piping code - Industrial piping - Part 5: Inspection and testing
GB/T 1048-1990 Nominal pressure for pipe components
GB/T 34275-2017 Pressure piping code―Long-distance pipeline

Professional Standard - Special Equipment Specification

TSG D7004-2010 Periodical Inspection Regulation for City Gas Pressure Pipeline and Thermal Pressure Pipeline
TSG D7002-2006 Pressure Piping Components Type Test Regulation
TSG R1001-2008 Design Appraisal Regulations for Pressure Vessel & Pressure Pipe
TSG D7005-2018 Periodic Inspection Regulation for Industrial Pressure Piping
TSG D7003-2010 Periodical Inspection Regulation for Oil and Gas Pressure Pipeline

未注明发布机构

DVGW G 469 E:2007-12 Pressure testing of gas transportation and distribution pipelines

German Institute for Standardization

DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001 E:2007-07 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001 E:2007 Draft Document - Pipelines on ships - Pressure ratings, pressure tests
DIN 4279-3:1990 Internal pressure testing of water pipes, pipe pressure testing of cast iron pressure pipes and steel pipes with cement mortar lining
DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001:1997-01 Pipelines on ships - Pressure ratings, tests
DIN 86001:1997 Pipelines on ships - Pressure ratings, tests
DIN EN 1445 E:1994-07 Fibre-cement pipelines - Field pressure testing
DIN EN 1445 E:1994 Draft Document - Fibre-cement pipelines; field pressure testing; German version prEN 1445:1994
DIN 1262:1977 Lead pipes for pressure pipes
DIN V 2401-2:1966 Pressure rating and service pressure of iron pipe fittings for pressure pipelines
DIN EN ISO 3459 E:2021-06 Test method for tightness of mechanical joints between plastic piping system fittings and pressure piping under negative pressure (draft)
DIN EN ISO 3503 E:2013-09 Test method for tightness under internal pressure in bent assemblies of mechanical joints between plastic piping system fittings and pressure piping (draft)
DIN EN ISO 3459 E:2013-09 Test method for tightness of mechanical joints between plastic piping system fittings and pressure piping under negative pressure (draft)
DIN 28632:1990 Cast iron pipe fittings and pressure pipes
DIN EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015
DIN EN ISO 3459:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015); German and English version EN ISO 3459:2015
DIN EN ISO 3501:2022 Plastic piping systems – Mechanical connections between fittings and pressure pipes – Testing resistance to tensile load at constant tensile force (ISO 3501:2021)
DIN EN ISO 13254:2018-01 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010); German version EN ISO 13254:2017
DIN EN 1053:1995-12 Thermoplastics piping systems for non-pressure applications - Test method for watertightness

FI-SFS

SFS 2897-1980 Natural Gas Pipeline. pressure test
SFS 2350 S-1968 Asbestos-cement pipes and fittings for pressure pipelines; methods of tests and quality requirements

CH-SNV

SN ISO 105/X09:1984 pipeline. Ferrous metal piping notes and guidelines. Rated pressure; working pressure; test pressure

CZ-CSN

CSN 05 1161-1985 Pressure test on welded joints of pipeline and pressure vessels from plastics
CSN 75 5911-1995 Prcssurc tests of water and irrigation pipelines
CSN 73 6611-1983 Pressure tests for water and irrigation pipelines
CSN 13 7602-1989 Compression couplings for tubes. Technical requirements and test methods
CSN ON 73 6954-1962 Subsoil irrigation pressure píping
CSN 72 3131-1960 Asbestos pement pressure pipes
CSN 13 0010-1989 Piping and fitting. Nominal pressures and working overpressure

RO-ASRO

STAS 2250-1973 Pipe components NOMINAL PRESSURES, TEST PRES- SURES AND MAXIMUM ADMISSI- BLE WORKING PRESSURES
STAS SR ISO 3459:1995 Polyethylene (PE) pressure pipes - Joints assembled with mechanical fittings -Internal under-pressure test method and requirement
SR EN 804-1996 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistence to a short-term internal hydrostatic pressure

Ente Nazionale Italiano di Unificazione

UNI 5336:1963 Cast iron pipes for pressure pipelines - Quality, requirements and tests
UNI 7527-2:1976 Lead tubes. Tubes for pressure applications.
UNI 4675:1961 Manometers and pressure and vacuum gages. Removable ducting.

PT-IPQ

NP 520-1988 Asbestos-cement pressure pipes Watertightness test
NP EN 12106-2000 Plastics piping systems Polyethylene(PE) pipes Test method for the resistance to internal pressure application of squeeze-off

Magyar Szabványügyi Testület

MSZ 2873-1986 Pipe surface, operating and test pressures
MNOSZ 85-1952 Cast iron pressure pipe muffle rated pressure 10
MNOSZ 86-1951 Cast iron pressure pipe flange. Nominal pressure 10

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings
AS/NZS 2885.5:2012 Pipelines - Gases and Liquid Petroleum - Field Pressure Testing
AS/NZS 2885.5:2002 Pipelines-Gas and liquid petroleum - Field pressure testing

SE-SIS

SIS SMS 1230-1975 Pipeline systems. Nominal pressure, PN. Working pressure. Test pressure
SIS SMS 333 E-1959 pipeline. Pressure and temperature of pipes, flanges and fittings
SIS 14 22 03-1965 Pressure vessel steel for tubing

Spanish Association for Standardization (UNE)

UNE 19 002 pipeline. Pressure segment setting. Rated pressure; working pressure; test pressure
UNE-EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015)
UNE-EN 803:1995 PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR ELASTIC SEALING RING TYPE JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL PRESSURE WITHOUT END THRUST
UNE-EN ISO 13254:2018 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)

Gosstandart of Russia

GOST 356-1968 Conditional, test and working pressures for fittings and connecting parts of pipelines

Standard Association of Australia （SAA）

AS 1978:1977 Rules for the field pressure testing of gas and liquid petroleum land or submarine pipelines known as the SAA Code for Field Pressure Testing of Pipelines
AS 3707:1989 Method for testing pressure cycling resistance of pipes and fittings
AS 4041:2006(R2016) Pressure piping
AS 4041:2006 Pressure piping
AS 4041:1998 Pressure piping
AS 4041:1992 Pressure piping
AS 1978:1987 Pipelines—Gas and Liquid Petroleum—Field Pressure Testing
AS CB18.1 INT 1:1971 Design, fabrication, installation and inspection of pressure piping (known as the SAA Pressure Piping Code) - Interpretations to SAA Pressure Piping Code No 1 (October 1971) - Application of AS 1074 pipe for pressure piping
AS A88.1:1970 Cast iron non-pressure pipes
AS 4130(INT):1993 PE pipes, pressure applications
AS 2885.5:2020 Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing
AS 2885.5:2020/Amdt 1:2022 Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing
AS 4058:1992 Precast concrete pipes (pressure and non-pressure)
AS 2544:1982 Grey iron pressure pipes and fittings
AS 1711:1975 Asbestos cement pressure pipes

AT-ON

ONORM M 3036-1983 Eddy current testing of pipes as replacement for the pressure-tightness-test
OENORM EN ISO 3459:2021 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leak tightness under negative pressure (ISO/DIS 3459:2021)
ONORM B 5071-1995 Pipes, pressure pipes and fittings of reinforced concrete - Requirements, testing and quality control -Markina of conformitv

Standards Norway

NS 3551:1986 Testing tightness of pressure pipes, sewers and manholes by means of water

Association Francaise de Normalisation

NF EN 802:1994 Plastic Pipe and Duct Systems - Thermoplastic Injection Molded Pipe Fittings with Pressure - Maximum Crush Strain Test Method

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-05-13-1-2005 Detecting Critical Supply Duct Pressure

SCC

ASSP A10.35-2020 Safety Requirements for Pressure Testing Steel and Copper Piping Systems
CAN 3-B137.0-M86-1986 Definitions, General Requirements, and Methods of Testing for Thermoplastic Pressure Piping

PL-PKN

PN S47033-1990 Road vehicles Elastic hoses for hydraulic brakesRe?uirements and tests
PN C89204-1974 Unplasticized polyvinyl. chloride pressure pipes . Specification and methods of test
PN C89017-1992 Plastics pipes. Determination of the resistance to internal pressure

CN-STDBOOK

图书 3-9932 Pressure Piping Code for Industrial Piping

Society of Automotive Engineers (SAE)

SAE J1065-2009 Nominal Reference Working Pressures for Steel Hydraulic Tubing

American Society of Mechanical Engineers (ASME)

ASME STP-PT-028-2009 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
ASME B31.3-2022 Process Piping - ASME Code for Pressure Piping, B31
ASME N-522-2001 Pressure Testing of Containment Penetration Piping Section XI, Division 1

American Petroleum Institute (API)

API RP 1110-1981 RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF LIQUID PETROLEUM PIPELINES (Second Edition)
API RP 1110-1991 Pressure Testing of Liquid Petroleum Pipelines Third Edition
API RP 1110-1997 Pressure Testing of Liquid Petroleum Pipelines (Fourth Edition)

IT-UNI

UNI 1283-1967 pipeline. Nominal pressure
UNI 7516-1976 asbestos. On-site pressure testing of cement pipelines
UNI 4372-1959 Asbestos in pressure pipes. －Cement pipe

US-FCR

FCR FED H-08-4 VOL 3 SEC II 610.7-1988 DUCT PRESSURE CLASSES
FCR UFGS-40 17 26.00 20-2006 WELDING PRESSURE PIPING
FCR COE CE 1406 AMENDMENT 1-1966 WELDED POWER PENSTOCKS AND SURGE TANKS
FCR COE CE 1406-1963 WELDED POWER PENSTOCKS AND SURGE TANKS

European Committee for Standardization (CEN)

EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
prEN ISO 3459:2021 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leak tightness under negative pressure (ISO/DIS 3459:2021)
EN ISO 7751:1997 Rubber and Plastics Hoses and Hose Assemblies - Ratios of Proof and Burst Pressure to Design Working Pressure ISO 7751: 1991

GCC Standardization Organization

GSO ISO 9853:2008 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U)fittings for pressure pipe systems -Crushing test
GSO ISO 3458:2016 Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure
GSO ISO 3459:2021 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

IN-BIS

IS 11639 Pt.1-1986 Design standards for pressure piping structures Part 1 Surface pressure piping
IS 11625-1986 Hydraulic design standards for pressure pipelines

BE-NBN

NBN I-888-1968 Concrete sewer pipes. Measurement of internal pressure

National Association of Corrosion Engineers (NACE)

NACE Paper 07545-2007 INTERNAL PRESSURE TESTING AS A TOOL FOR LIFE CYCLE MANAGEMENT OF PIPING SYSTEMS

Canadian Standards Association (CSA)

CSA B51-2019(R2024) Boiler, pressure vessel, and pressure piping code
CSA Z169-M1978-1978 Aluminum Pipe and Pressure Piping Systems
CSA B51-2003(R2007) Boiler, Pressure Vessel, and Pressure Piping Code
CSA B51-1995 Boiler, Pressure Vessel, and Pressure Piping Code
CSA B137.0-2023 Definitions, general requirements, and methods of testing for thermoplastic pressure piping
CSA B51-14:2014 Boiler, pressure vessel, and pressure piping code
CSA B137.0-1999 Definitions, General Requirements, and Methods of Testing for ThermoplasticPressure Piping
CSA B137.0-1993 Definitions, General Requirements, and Methods of Testing for Thermoplastic Pressure Piping
CSA B137.0-2020 Definitions, general requirements, and methods of testing for thermoplastic pressure piping
CSA B51-2024 Boiler, pressure vessel, and pressure piping code
CSA B137.0-M1981-1981 Definitions, General Requirements, and Methods of Testing for Thermoplastic Pressure Piping

U.S. Military Regulations and Norms

ARMY UFGS-33 34 00-2008 FORCE MAINS AND INVERTED SIPHONS; SEWER

American National Standards Institute （ANSI)

ANSI/ASTM D1599:1999 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings

CEN - European Committee for Standardization

PREN 15014-2014 Plastics piping systems - Buried and above ground piping components for water under pressure - Requirements and test/assessment methods for pipes and fittings

American Society for Testing and Materials (ASTM)

ASTM F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

DE-GPVA

AD 2000-Merkblatt HP512 R-2003 Manufacture and testing of pressure vessels.Design examination, final testing and pressure testing of piping

International Organization for Standardization (ISO)

ISO 4179:2024 Ductile iron pipes and fittings for pressure and non-pressure pipelines

Canadian General Standards Board （CGSB)

CAN/CGSB 34.1-1994 Asbestos-cement pipe for pressure pipelines
CAN/CGSB-34.1-M87-1987 Asbestos-cement pipe for pressure pipelines
CAN/CGSB-34.1-1994 Asbestos-cement pipe for pressure pipelines

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3458:2017 Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure
BH GSO ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

South African Bureau of Standard

SANS 677:2003 Concrete non-pressure pipes
SANS 677:2010 Concrete non-pressure pipes

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3458:2016 Plastics piping systems -- Mechanical joints between fittings and pressure pipes -- Test method for leaktightness under internal pressure

British Standards Institution (BSI)

BS EN ISO 3459:2022 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure

GM Europe

GME 14018-2007 Testing the Force Fit of Pipe Connections of Exhaust System Pipes (English/German; Note: This specification may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14449.)

Korean Agency for Technology and Standards (KATS)

KS L 5302-1991 ASBESTOS Cementitious pressure pipes

Others: Pipeline Test Pressure Standards,Stress Test Standard,Pipeline Pressure Test,Standard test method for static testing of rate of inflation pressure loss of tubeless pneumatic tires