Plasticity

Plasticity, Total:130 items.

The international standard classification for "Plasticity" includes: Thermosetting materials , Thermoplastic materials , Plastics , Plastics pipes, fittings and valves , Reinforced plastics , Raw materials for rubber and plastics in general .

The Chinese standard classification for "Plasticity" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Plastic profile , Fibre reinforced composites , Hot processing technology .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16419-1996 Plastics―Determination of flexural properties by use of small specimens
GB/T 17603-1998 Method for outdoor exposure testing of photodegradable plastics
GB/T 1446-1983 The generals of test methods for properties of fiber-reinforced plastics
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 1040-1992 Plastics-Determination of tensile properties
GB/T 21060-2007 Plastics—Determination of pourability
GB/T 5471-2008 Plastics - Compression moulding of test specimens of thermosetting materials
GB/T 1446-2005 Fiber-reinforced plastics composites?The generals
GB 18006.1-2009 General requirement of plastic disposable tableware
GB/T 17037.3-2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
GB/T 27725-2011 Butterfly valves of thermoplastics materials

Group Standards of the People's Republic of China

T/QGCML 1518-2023 Plastic modified particles

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

Professional Standard - Aviation

HB 0-84-2001 General specification for molded parts of thermosetting plastics
HB/Z 5017-1996 Moulding Process of Thermosetting Plastic Products

Professional Standard - Light Industry

QB/T 2517-2001 Disposable Plastic Drip Tape

Professional Standard - Chemical Industry

HG/T 6258-2023 Plastic Thermoplastic polyimide (PI) resin

HU-MSZT

MSZ KGST 871-1978 Plastic plasticity testing
MSZ 7526-1984 Plastic stickiness detection
MSZ 7527-1984 Plastic viscosity test

Japanese Industrial Standards Committee (JISC)

JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS Z 7311:2010 Refuse derived paper and plastics densified fuel
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates

Korean Agency for Technology and Standards (KATS)

KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M 3071-2019 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 306-2020 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 4899-2022 Tixtile－glass－reinforced thermosetting plastics－Properties and test methods

British Standards Institution (BSI)

BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 306:2022 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS ISO 4665:2016 Rubber, vulcanized or thermoplastic. Resistance to weathering

YU-JUS

JUS G.S2.818-1990 Plastics. Cellular plastics, rigid. Determination of water absorption

Association Francaise de Normalisation

NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of the Vicat softening temperature (VST)
NF ISO 4665:2016 Caoutchouc vulcanisé ou thermoplastique - Résistance aux intempéries

RO-ASRO

STAS 6127-1968 plastic. Determination of tear resistance of thermoplastic materials
STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS 12501-1986 PLASTICS Behaviour determination at moulding machining of plasticized polyvinyl chloride granules

International Organization for Standardization (ISO)

ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 10329:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 306:2013 Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)

American National Standards Institute （ANSI)

ANSI/AWS B2.4:2012 Specification for Welding Procedure and Performance Qualification for Thermoplastics

PL-PKN

PN C89418-1990 Plastics Determination of volatile matter in thermoplastics

RU-GOST R

GOST 32561-2013 Hard coal. Determination of plastic properties. Gieseler plastometer method
GOST R 54247-2010 Hard coal. Determination of plastic properties by Gieseler plastometer method
GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics

SE-SIS

SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials

German Institute for Standardization

DIN EN ISO 306 E:2012-01 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN ISO 306 E:2021-11 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN ISO 20028-1 E:2018-09 Plastic thermoplastic polyester (draft)
DIN EN ISO 20028-1 E:2015-08 Plastic thermoplastic polyester (draft)
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN 1871 E:2018-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN EN ISO 20028-2 E:2015-08 Plastic thermoplastic polyester (draft)
DIN EN 1871 E:2008-09 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
DIN EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003

European Committee for Standardization (CEN)

EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)

SCC

DANSK DS/ISO 293:2023 Plastics – Compression moulding of test specimens of thermoplastic materials
DANSK DS/CEN/TS 16892:2016 Plastics - Welding of thermoplastics - Specification of welding procedures
SN-CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2003 Plastics. Compression moulding test specimens of thermoplastic materials
DIN 35230 E:2016 Draft Document - Plastics - Welding of thermoplastics - Specification of welding procedures
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 306:2004 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
DANSK DS/EN ISO 306:2013 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS EN ISO 306:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
NS-EN ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
NS-EN ISO 293:2005 Plastics — Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
DANSK DS/ISO 306:2022 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS EN ISO 294-3:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Small plates

Spanish Association for Standardization (UNE)

UNE 32321:1995 HARD COAL. DETERMINATION OF PLASTIC PROPERTIES BY THE CONSTANT TORQUE GIESELER PLASTOMETER.
UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

CZ-CSN

CSN 64 0528-1993 Plastics. Determination of coefficient of linear thermal expansion of plastics
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics

South African Bureau of Standard

SANS 737:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method

CEN - European Committee for Standardization

EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Danish Standards Foundation

DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

American Society for Testing and Materials (ASTM)

ASTM D7265-12 Standard Specification for Hydrogen Thermophysical Property Tables
ASTM D7265-06 Standard Specification for Hydrogen Thermophysical Property Tables
ASTM D5870-95 Standard Practice for Calculating Property Retention Index of Plastics

TR-TSE

TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS

GSO

BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
OS GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)

GOST

GOST 11645-2021 Plastics. Methods for determination of flow index of thermoplastics melt

Indonesia Standards

SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Lithuanian Standards Office

LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)

Others: plastic compatibility,plastic compatibility,combustible plastic,combustible plastic,plastic impact resistance,plastic impact resistance,compatible plastic,plastic conductivity,plastic fatigue,plastic conductivity,plastic permeability,Plasticity,plastic tightness,plastic tightness,Plasticity,plasticity index,plastic electrical conductivity,plastic resistance,thermal expansion of plastic