What kind of film is used for rough surface

What kind of film is used for rough surface, Total:179 items.

The international standard classification for "What kind of film is used for rough surface" includes: Films and sheets , Rubber and plastics products , Manufacturing forming processes , Properties of surfaces , Iron and steel castings , Semiconducting materials , Surface preparation , Cable or rope drives and their components , Conducting materials , Belt drives and their components , Wood technology processes , Textile fabrics .

The Chinese standard classification for "What kind of film is used for rough surface" includes: Plastic profile , Basic standards and general methods for synthetic resin and plastic , Casting , Basic standards and general methods , Measuring tool and instrument , Semimetal and semiconductor material in general , Material Protection , Chain drive, belt drive and key joint , Carbon material , Length Measurement , Basic standards and general methods .

Taiwan Provincial Standard of the People's Republic of China

CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
CNS 7868-1981 Surface Roughness
CNS 10793-1984 Roughness Comparison Specimens

Group Standards of the People's Republic of China

T/CPIA 0064-2024 Photovoltaic packaging film surface roughness test method

Professional Standard - Chemical Industry

HG/T 2348-1992 Tracer Method for Measurement of Surface Roughness of Polyester Film for Tape

Professional Standard - Aviation

HB 6172-1988 General Surface Roughness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12472-1990 Surface roughness-Parameters and their values for wooden pieces
GB/T 11357-1989 Quality,Surface roughness and balance of transmission pulleys
GB/T 14495-1993 Roughness comparison specimens for wooden pieces
GB/T 6060.4-1988 Roughness comparison specimens--Polished surfaces
GB/T 42671-2023 Test method for surface roughness of carbon materials
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitio
GB/T 6060.1-1997 Roughness comparison specimens - Cast surfaces
GB/T 6060.2-1985 Roughness comparison specimens; Ground, turned, bored,milled, shaped and planed
GB/T 6060.3-1986 Roughness comparison specimens--Spark-erosion machining surfaces
GB/T 1031-1995 Surface rouglness--Parameters and their values
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 6060.5-1988 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
GB/T 29505-2013 Test method for measuring surface roughness on planar surfaces of silicon wafer
GB/T 15056-1994 Evaluation method on cast surface roughness
GB/T 13841-1992 roughness for electronic ceramic parts
GB/T 11357-2008 Quality roughness and balance of transmission pulleys
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products―Surface roughness characteristics of blast-cleaned substrates―Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface prof
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calib
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 14234-1993 roughness for plastic parts

Professional Standard - Military and Civilian Products

WJ/Z 314-1991 Fuze parts surface roughness

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 15056-2017 Casting surface roughness-Appraising method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 11357-2020 Quality, roughness and balance of transmission pulleys
GB/T 6060.1-2018 Surface roughness comparison specimen—Part 1:Casting surface

National Metrological Technical Specifications of the People's Republic of China

JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens
JJF 1210-1990 O.T.N of Sourface Roughness Standard
JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens

Professional Standard - Textile

FZ/T 01115-2012 Test method of roughness behaviour for fabric sueface

National Metrological Verification Regulations of the People's Republic of China

JJG 2018-1989 Measuring Instruments for Surface Roughness

未注明发布机构

DIN 40686 Beiblatt 2:1983 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness

German Institute for Standardization

DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 40686 Bb.2:1983 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness
DIN 40686 Beiblatt 2:1983-08 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness

SE-SIS

SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 04-1973 Concrete surfaces. Roughness
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SS-ISO 4287/1:1988 Surface roughness - Terminology - Part 1: Surface and its parameters
SIS SMS 672-1964 Drawing Rules, Declaration of Surface Roughness
SIS SS 02 11 09-1982 Measurement in building - Surface roughness - Expression of profile measurement

SCC

BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters
NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters
NS 982:1969 Surface roughness, reference lengths and roughness values
BS 6741-1:1987 Glossary of surface roughness terms-Surface and its parameters
NS-ISO 4287-1:1984 Surface roughness — Terminology — Part 1: Surface and its parameters
SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
BS 2634-3:1980 Specification for roughness comparison specimens-Cast surfaces
CSA B95-1962(R2002) Surface Texture (Roughness, Waviness and Lay)
AS 1965:1977 The measurement of surface roughness by direct-reading stylus electronic instruments

RO-ASRO

STAS R 6859-1968 Surface roughness. Roughness selection criteria
STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
STAS 5730/2-1985 Surface conditions SURFACE ROUGHNESS PARA- METERS AND SPECIFICATIONS
STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS
STAS ISO 1879:1993 Instrumets for the measurement of surface roughness by the profile method. Vocabulary

HU-MSZT

MSZ 9654-1966 Surface roughness
MSZ 4952-1983 Rough sample of casting surface
MSZ 9654/1-1986 Cut surface roughness sample
MSZ KGST 1632-1979 Surface roughness marking on technical drawings
MSZ KGST 638-1977 Surface roughness parameters and main values
MSZ 4722-1984 Surface roughness parameters and main parameter values

TR-TSE

TS 971-1971 SURFACE ROUGHNESS
TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

Korean Agency for Technology and Standards (KATS)

KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
KS B 0161-1999 Surface roughness-Definitions and designation
KS B 0507-1975 Roughness Comparison Specimens
KS B 0507-1986 Roughness Comparison Specimens
KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS M 3817-1982 Methods for comparison of surface roughness of plastics
KS M 3817-2004 Methods for comparison of surface roughness of plastics
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS M 3817-2002 Methods for comparison of surface roughness of plastics
KS B 0505-1975 Instruments for the measurement of surface roughness (by the capacitance method)
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0503-1976 Instruments for the measurement of surface roughness (by light cutting method)
KS B 0162-2013 Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0507-1975(2011) Roughness Comparison Specimens
KS B 0506-2021 Instruments for the Measurement of Surface Roughness by the Interferometric Method

CU-NC

NC 03-04-1967 Surface roughness
NC 02-10-1967 Indication of surface roughness on drawings

NL-NEN

NEN 3636-1980 Surface roughness - Roughness comparison specimens
NEN 3635-1980 Surface roughness - Measurement of fla roughness value
NEN 3632-1986 Surface roughness - Evaluation of Ra value
NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
NEN 1839-1989 Paper - Determination of paper surface roughness with water

Society of Automotive Engineers (SAE)

SAE AS291A-1955 SURFACE ROUGHNESS (AA)
SAE AS291B-1960 SURFACE ROUGHNESS (AA)
SAE AS291C-1963 SURFACE ROUGHNESS (AA)
SAE AS291F-2014 Surface Texture, Roughness, Waviness and Lay
SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY

SAE - SAE International

SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay

CH-SNV

VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

YU-JUS

JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process
JUS M.A1.010-1983 Surface roughness. Terminology. Surface and its parameters
JUS M.A1.024-1981 Sur face roughness of industrial products. Classification of surface fktws
JUS M.A1.043-1982 Roughness camparison specimens — Gast surfaces
JUS M.A1.027-1981 Surface roughness ofindustrial products. Classification ofscraped surfaces.

AR-IRAM

IRAM 5263-1964 Rough surface sign

CZ-CSN

CSN 01 4456-1983 Surface rouglmess of castings
CSN 73 2520-1993 Surface roughness of stmctures
CSN ON 01 4452-1962 Surface roughness of water pipe parts
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values
CSN ON 28 2109-1964 Surface roughness of electric two-wheel parts
CSN 01 3144-1980 Technical drawings. Indieation of surface roughness
CSN ON 13 0060-1962 Surface roughness of parts, fittings and pipes
CSN 49 0169-1986 Method for determination surface roughness of particle boards
CSN 25 2302-1980 Surface roughness comparison specimens. echnical requirements
CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification

RU-GOST R

GOST 19948-1974 Wax-pattern dies. Surface roughness
GOST 25142-1982 Surface roughness. Terms and definitions
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 16241-1970 Chill moulds. Roughness of surface
GOST 21293-1975 Surface finish heated core boxes. Parameters
GOST 13355-1974 Metal core boxes and casting patterns. Surface finish

Danish Standards Foundation

DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness
DS/ISO 4287/1:1986 Surface roughness Terminology Part 1: Surface and its parametres

IN-BIS

IS 3073-1967 Assessment of surface roughness
IS 10707-1983 Instrument for measuring surface roughness using profilometry

Japanese Industrial Standards Committee (JISC)

JIS B 0659:1996 Roughness comparison specimens
JIS K 7104:1976 Methods for comparison of surface roughness of plastics
JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS B 0660:1998 Surface roughness -- Terminology -- Part 1: Surface and its parameters
JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS B 0601:1994 Surface roughness -- Definitions and designation

GOST

GOST R 70117-2022 Surface roughness. Selection recommendations

IT-UNI

UNI 3963-P2-1978 Surface geometric errors. Surface roughness'1

Indonesia Standards

SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument
SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.

International Organization for Standardization (ISO)

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
ISO 3546:1976 Fibre building boards; Determination of surface finish (roughness)

AT-ON

ONORM M 1117-1989 Surface roughness and workpiece function Rugosit? de surface et fonction de pi6ce usin?e
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments

American Society for Testing and Materials (ASTM)

ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

Standard Association of Australia （SAA）

AS 2382:1981 Surface roughness comparison specimens

BR-ABNT

ABNT NB-93-1964 Surface roughness. Brazilian Norms

American National Standards Institute （ANSI)

ANSI/ASME B46.1-2009 Surface Texture, Surface Roughness, Waviness and Lay

PL-PKN

PN M04256-03-1987 Geometrie surface structure Surface roughness Terminology of measurements
PN M04256-02-1987 Geometrie surface structure Surface roughness General terminology
PN M04251-1987 Geometrie surface structure Surface roughness Numerical values of parameters
PN D04206-1987 Particleboard and fibreboard Determination of surface roughness

American Society of Mechanical Engineers (ASME)

ASME B46.1-1962 Surface Texture (Surface Roughness, Waviness, and Lay)
ASME B46.1-1978 Surface Texture (Surface Roughness, Waviness, and Lay)
ASME B46.1-1995 Surface Texture, Surface Roughness Waviness and Lay (B46.1 - 1995)
ASME B46.1-1985 Surface texture (surface roughness, waviness, and lay)
ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)
ASME B46.1-2019 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)
ASME B46.1-2002 Surface texture (surface roughness, waviness, and lay)

AENOR

UNE 82303:1991 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROFILE METHOD. VOCABULARY
UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)