Within-group testing vs. between-group testing

Within-group testing vs. between-group testing, Total:330 items.

The international standard classification for "Within-group testing vs. between-group testing" includes: Tractive stock , Telecommunication systems in general , Nuclear power plants. Safety , Energy and heat transfer engineering in general , Electric traction equipment , Trailing stock , Agricultural tractors and trailed vehicles , Natural gas , Software development and system documentation , Wind turbine systems and other alternative sources of energy , Environmental testing .

The Chinese standard classification for "Within-group testing vs. between-group testing" includes: Diesel locomotives , Telecommunication technical requirements and interface , Nuclear radiation accident emergency and treatment , Technical management , Electric locomotives , Railway vehicles in general , Tractor , Railway trucks , Heat supply, air supply, air conditioning and refrigerating engineering in general , Software engineering , DC machine , Wind energy , Ambient conditions , Communication network in general , Petroleum products in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11597-1999 Procedure for the exchange of control information and user data between a packet assembly /disassembly(PAD) facility and a packet mode DTE or another PAD
GB/T 15913-2009 Monitoring and testing for energy saving of fan’s unit and distribute tube system
GB 3315-1982 Rules for the inspecting and testing of diesel locomotives after completion of construction
GB/T 15913-1995 Monitoring and testing method for energy saving of fan unit and distribution tube system
GB/T 22716-2008 Test specifications of interturn insulation of armature winding for DC electrical machines
GB/T 7123.1-2015 Determination of the working life of multi-component adhesives
GB/T 12818-2004 Rules for inspecting and testing of railway passenger car after completion of construction
GB/T 12208-2008 Test methods of components and impurities of the manufactured gas
GB/T 3318-1982 Rules for inspecting and testing of electric locomotives after completion of construction
GB 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction
GB/T 3315-1982 Rules for inspecting and testing of diesel locomotives after completion of construction
GB/T 15913-2022 Monitoring and testing for energy saving of fan's unit and distribute tube system
GB/T 24643-2009 Fuel consumption of tractor set during field operation. Test methods
GB/T 5601-1985 Rules for inspecting and testing of freight car after completion of construction
GB/T 12818-1991 Rules for inspecting and testing of railway passenger car after completion of construction
GB/T 17680.6-2003 Criteria for emergency planning and preparedness for nuclear power plants - On-site emergency response functions and organizations

Professional Standard - Railway

TB/T 3351-2014 Limits and methods of measurement of low frequency magnetic field inside Multiple Units

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF(机械)1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF 1691-2018 Calibration Specification for Impulse Voltage Testers for Winding Interturn Insulation

Group Standards of the People's Republic of China

T/QGCML 033-2020 Specifications for assembly and debugging of training equipment robots
T/JSEE 008-2022 Guidelines for Vibration Testing and Evaluation of Tubing Units for Condenser Units
T/NJ 1250-2020 Tractor-implement combination—Test procedure—Rotary tillage
T/ZZB 0297-2017 Air handling unit for clean room
T/NJ 1252-2020 Tractor-implement combination—Test procedure—Subsoiling tillage
T/NJ 1253-2020 Tractor-implement combination—Test procedure—Land preparation operation
T/QGCML 2444-2023 Endoscope bending components
T/NJ 1251-2020 Tractor-implement combination—Test procedure—Ploughing operation
T/BAS 012-2023 Standardization of data organization and expression model for safe circulation of folk cultural relics
T/CSTM 00464-2022 Indoor hot-spot endurance test for crystalline silicon photovoltaic (PV) modules
T/QGCML 2362-2023 GIS and HGIS combined electrical and dynamic characteristics tester
T/ZZB 0297-2022 Air handling unit for clean room

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38639-2020 Systems and software engineering—Software combinatorial testing method
GB/T 12818-2021 Rules for inspecting and testing of railway passenger car after completion of construction

Professional Standard - Machinery

JB/T 7080-2013 Impulse Voltage Tester for Winding Interturn Insulation
JB/T 9617-1999 Test Specifications of Interturn Insulation of Armature Winding for DC Electrical Machines
JB/T 7080-1993 Testing instrument for winding inter-turn impulse voltage

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1760-2020 Separation and Determination of Hydrocarbon Composition in Middle Distillates by Comprehensive Two-Dimensional Gas Chromatography

Professional Standard - Energy

NB/T 10315-2019 Technical requirement and test code of primary frequency regulation of wind turbine
NB/SH/T 0606-2019 Standard test method for determination of hydrocarbon types in middle distillates by mass spectrometry
NB/T 10314-2019 Technical requirements and test code of reactive power and voltage control of wind turbine

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35854-2018 Mechanical vibration measurement and evaluation for the wind turbinesand their components

Professional Standard - Aerospace

QJ 2630.4-1996 Space encironment test methods for satellite components.Megnetic test
QJ 2630.3-1994 Space environment test method for satellite components Vacuum discharge test
QJ 2630.1-1994 Space environment test method for satellite components Thermal vacuum test
QJ 2630.5-1998 Space Environment Test Methods for Satellite Components Vacuum Cold-Welding Test
QJ 2630.2-1994 Satellite component space environment test method heat balance test

工业和信息化部

YD/T 3308-2017 The ping and traceroute protocols for IP multicast

Taiwan Provincial Standard of the People's Republic of China

CNS 14964-16-2007 Wheelchairs - Part 16 : Resistance to ignition of upholstered parts - Requirements and test methods
CNS 13796-1996 General Aspects and Principles Relating to Recommendations on ISDN User-Network Interface-Reference Configurations
CNS 5751-1980 Method of Test for Apparent Density of Ceramics for Electron Device and Semiconductor Application
CNS 11239-1985 Endurance (Electrical) Testing Method for Electronic Component

Professional Standard - Post and Telecommunication

YD/T 2304-2011 Test Specification for IP Multicast Service
YD/T 2317.4-2011 MPLS Multicast Technical Specification - Part 4: Technical Requirement for Service Interface Between MPLS Multicast and Multicast Virtual Private Network
YDN 117-1999 Planning Method and Organization Principle for Digital Synchronization Network

Professional Standard - Petrochemical Industry

SH/T 0606-1994 Middle Distillate Hydrocarbon Composition Determination (Mass Spectrometry)
SH/T 0606-2005 Standard test method for hydrocarbon types in middle distillates by mass spectrometry

Military Standard of the People's Republic of China-General Armament Department

GJB 9890.1-2020 Structure testing and evaluation of GH4169 alloy for aviation use Part 1: Low magnification and microstructure testing and evaluation
GJB 383.3-1987 Telemetry system and subsystem test methods Telemetry receiver local oscillator and mixer combination test method

Professional Standard - Aviation

HB 4292-1989 A type center guide pillar die base components
HB 4388-1989 Technical conditions for die body combined punch die elements and components

Professional Standard - Urban Construction

JG/T 580-2022 Indirect evaporative chiller

Professional Standard - Electricity

DL/T 5036-2020 Technological guidelines for assembly and test of paddle runner
DL/T 5036-1994 Guide for assembly and test technology of runner of Kaplan turbine

国家机械工业局

JB/T 9697-1999 Specification for interturn insulation test of DC motor armature windings

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 517-2011 Automatic disconnection equipment between grid-connected generator sets and the public low-voltage grid

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 3196.43A-2005 Test methods of cartridge.Part 43:Action time in chamber.Indirect measure method

Professional Standard - Electron

SJ/T 9167.8-1993 Cord Sets and Power-Supply Cords

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3593-2019 Test method for fire performance of photovoltaic modules and components

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1893-2016 LED backlight component test method

Henan Provincial Standard of the People's Republic of China

DB41/T 1418-2017 Technical specification for spatial prediction of mechanical composition of fluvo-aquic soil surface

中国气象局

QX/T 645-2022 Quality review and correction of wind measurement data of wind turbines

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2170-2016 Guidelines for Organizational Interlaboratory Comparisons

GOSTR

GOST R 59047-2020 Interaction with testing laboratories during testing of consumer goods. Guide for non-profit organizations
GOST R 58940-2020 Requirements for protocols for the exchange of information between the components of the intelligent metering system and metering devices
GOST R ISO 10002-2020 Quality management. Customer satisfaction. Guidelines for com-plaints handling in organizations

RU-GOST R

GOST R ISO 8528-8-2005 Reciprocating internal combustion engine driven alternating current generating sets. Part 8. Requirements and tests for low-power generating sets
GOST R 54069-2010 Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Part 1. Construction and testing
GOST ISO 8579-2-2002 Vibration. Determination of mechanical vibrations of gear units during acceptance testing
GOST 26658-1985 Electric generating sets and mobile power stations with internal combustion engines. Test methods
GOST 26602.1-1999 Windows and doors. Methods of determination of resistance of thermal transmission
GOST R ISO 18454-2008 Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear
GOST 26602.3-1999 Windows and doors. Method of measurement of sound insulation
GOST 26602.2-1999 Windows and doors. Methods of determination of air and water transmission
GOST 26602.5-2001 Windows and doors. Methods of determination of resistance to wind load
GOST 26602.4-1999 Windows and doors. Method of determination of total light transmittance
GOST R ISO 8528-6-2005 Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods
GOST R ISO 10002-2007 Organization management. Customer satisfaction. Guidelines for complaints handling in organizations
GOST 8.556-1991 State system for ensuring the uniformity of measurements. Methods for determination of waters samples composition and properties. General requirements for development
GOST 26602.4-2012 Windows and doors. Method for determination of total light transmittance

RO-ASRO

STAS SR ISO 3458:1995 Assembled jpints between fittings polyethylene (PE) pressure pipes -Test of leakproofness under internal pressure
STAS SR ISO 9356:1996 Polyolefin pipe assemblies with or without jointed flttings -Resistance to internai pressure - Test method

German Institute for Standardization

DIN 6280-10:1986 Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
DIN 6280-10:1986-10 Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
DIN EN ISO 252:2023-06 Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023); German version EN ISO 252:2023
DIN EN ISO 252 E:2022-06 Test method for adhesion between conveyor belt components (draft)
DIN EN ISO 252:2023 Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023)
DIN EN ISO 13788:2001 Thermal and moisture-related behavior of components and components Room-side surface temperature to avoid critical surface moisture and condensation inside the component Calculation method
DIN EN 16602-70-04:2015-01 Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies; English version EN 16602-70-04:2014
DIN ISO 8648:1990-07 Open systems interconnection; internal organization of the network layer; identical with ISO 8648:1988
DIN 6280-15:1997-08 Generating sets - Reciprocating internal combustion engines driven generating sets - Part 15: Combined heat and power system (CHPS) with reciprocating internal combustion engines; tests
DIN EN 1857 Berichtigung 2:2007 Chimneys - Components - Flue liners; German version EN 1857:2003, Corrigenda to DIN EN 1857:2003-11; German version EN 1857:2003/AC:2007
DIN 65099-5:1989-11 Aerospace; classification of special workshop facilities; process group D; assembling
DIN 6281:1978 Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines
DIN EN 16603-20-08:2022 Space engineering - Photovoltaic assemblies and components; English version prEN 16603-20-08:2022
DIN EN 50327:2006 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups; German version EN 50327:2003 + A1:2005

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3941-1996 Predicting Lubricant Performance in Refrigerant Compressors: a Comparison Between Component Testing and Benchtesters
ASHRAE 124-2007 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
ASHRAE 124 ERTA-2011 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
ASHRAE 124-1991 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
ASHRAE 124 ERTA-2016 Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
ASHRAE 16 ERTA-2012 Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners
ASHRAE 16 ERTA-2015 Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners
ASHRAE 58-1986 Method of Testing for Rating Room Air Conditioner and Packaged Terminal Air Conditioner Heating Capacity

CZ-CSN

CSN 27 4802-1985 Escalators. Assembling, testing, opera- tion, maintenance and lepaii
CSN 50 6450-1982 Testing of sanitary tissue
CSN 08 3005-1975 Internal coml ustion turbines. Delivering and testing
CSN 42 0001-1974 Survey of groups and subgroups of standards of class 42 - Metallurgy
CSN 77 1313-1990 Laminated package materials. Determination method of coherence between layers
CSN ON 44 2320-1967 Spatial conditions of combined work surfaces

GB-REG

REG AC 120-48-1988 Communication and Coordination Between Flight Crewmembers and Flight Attendants
REG NASA-LLIS-1570--2005 Lessons Learned ?In-House vs. Out-of-House Staffing Mix
REG NASA-LLIS-1551-2005 Lessons Learned ?In-House vs. Out-of-House Staffing Mix
REG NASA-LLIS-0781-2000 Lessons Learned - Thermal-Vacuum Versus Thermal-Atmospheric Tests of Electronic Assemblies

British Standards Institution (BSI)

BS PD IEC/TS 62878-2-4:2015 Device embedded substrate. Guidelines. Test element groups (TEG)
BS ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets. Test methods
BS EN 2641:1989 Specification for control cable assemblies - Combinations and dimensions
22/30455890 DC BS EN 16603-20-08. Space engineering. Photovoltaic assemblies and components
22/30448676 DC BS EN ISO 252. Conveyor belts. Adhesion between constitutive elements - Test methods
BS ISO 5879:2023 Space systems. Ground test for the separation between a launch vehicle and a spacecraft. Requirements for combined separation tests, horizontal separation tests and individual falling separation tests
BS DD ENV 302-5:2002 Adhesives for load-bearing timber structures - Test tethods - Determination of the conventional assembly time
24/30466839 DC BS ISO 14620-4 Space systems - Safety requirements - Part 4: Spacecraft assembly, integration, and test
22/30436361 DC BS ISO 14960-1. Tubeless tyres. Valves and components - Part 1. Test methods
PD ISO/TS 37008:2023 Internal investigations of organizations. Guidance
BS 7698-8:1996 Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets
BS ISO 8528-8:2016 Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets
BS EN ISO 20695:2020 Enteral feeding systems. Design and testing
BS ISO 12097-3:2002 Road vehicles. Airbag components - Testing of inflator assemblies
BS EN 17038-4:2023 Pumps. Methods of qualification of the Energy Efficiency Index for rotodynamic pump units. Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units

National Aeronautics and Space Administration (NASA)

NASA UFGS-23 73 00.00 40-2006 INDOOR CENTRAL-STATION AIR-HANDLING UNITS

Canadian Standards Association (CSA)

CSA P.9.1-2023 Test method for determining the performance of combined hydronic space and water heating systems (combos)
CAN/CSA-P.9-2011 Test method for determining the performance of combined space and water heating systems (combos) (First Edition; Update No. 1: March 2012)

SCC

ASD-STAN prEN 3095:1970 Sealants — Test method - Determination of extended assembly time
DANSK DS/EN ISO 252:2007 Conveyor belts – Adhesion between constitutive elements – Test methods
DIN V VDE V 0124-100 E:2011 Draft Document - Grid integration of generator plants - Generator units - Test requirements for generation units to be connected and operated parallel with the low-voltage distribution networks
10/30216081 DC BS ISO 17553. Room fan-coil units. Testing and rating for performance
DIN EN 16603-20-08 E:2013 Draft Document - Space engineering - Photovoltaic assemblies and components; English version FprEN 16603-20-08:2013
BS 3375-1:1984 Work study and organization and methods (O & M)-Guide to organization study
MIL MIL-T-50338-1969 TEST SET SUBASSEMBLY: 11726303 (TEST SOCKET ASSEMBLY) (NO S/S DOCUMENT)
CAN/CSA P.9-2011(R2020) Test method for determining the performance of combined space and water heating systems (combos), Includes Update No. 1 (2012)
BS EN ISO 252-1:1999 Textile conveyor belts. Adhesive strength between constitutive elements-Methods of test
NS-EN ISO 252:2007 Conveyor belts — Adhesion between constitutive elements — Test methods (ISO 252:2007)
DIN EN IEC 61189-5-502:2022 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-502: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of assemblies (IEC 61189-5-502:2021);...
MIL MIL-C-70490-1985 CIRCUIT CARD ASSEMBLY, MEMORY
HOLDEN HN 2002-2012 Trim Assembly - Door Inner Panel
HOLDEN HN 2004-2007 Trim Assembly - Door Inner Panel
BS PD ISO/TS 37008:2023 Internal investigations of organizations. Guidance
VDI/VDE 5570 BLATT 2:2006 Testing of assembled and unassembled plastic optical fibers (POF) — Testing methods for optical characteristics
VDI/VDE-EE 5570 BLATT 2:2019 Testing of assembled and unassembled plastic optical fibers (POF) — Testing methods for optical characteristics
NS 3152:1980 Internal wood doorsets - Principal dimensions
HOLDEN HN 2002-1989 Trim Assembly - Door Inner Panel
NS-EN 1397:1998 Heat exchangers — Hydronic room fan coil units — Test procedures for establishing the performance
BS 1100-10:1943 Office organization and practice
ULC-S104-1976 Fire Tests of Door Assemblies
VDI/VDE 5570 BLATT 1:2017 Testing of assembled and unassembled plastic optical fibers (POF) — Terms
CAN/CGSB 4.2 No.5.1-M90-1990 Méthodes pour épreuves - Masse des tissus
CAN4-S104.-1977 Fire Tests of Door Assemblies
07/30170567 DC BS ISO 11413. Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS ISO 13419:2003 Space data and information transfer systems. Packet telemetry
MIL MIL-C-70573B-1993 CIRCUIT ASSEMBLY, BUILT IN TEST, 5A3A3, U/5: 9360998 (NO S/S DOCUMENT) (SUPERSEDING MIL-C-70573A)
CSA C22.2 No.117-1960 Construction and Test of Room Air Conditioners
05/30094003 DC ISO 252. Conveyor belts. Ply adhesion between constitutive elements. Requirements and test methods
HOLDEN HN 1926-1995 Headlining - One Piece Assembly
DANSK DS/EN ISO 8032:1999 Rubber and plastics hose assemblies – Flexing combined with hydraulic impulse test (half-omega test)
DIN EN 16602-70-04 E:2014 Draft Document - Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies; English version FprEN 16602-70-04:2013
NS-EN 14777:2004 Space engineering — Multipaction design and test
HOLDEN HN 1997-2012 Headlining - One Piece Assembly
HOLDEN HN 1926-2012 Headlining - One Piece Assembly
HOLDEN HN 1997-1990 Headlining - One Piece Assembly
DANSK DS/ISO 252:2023 Conveyor belts – Adhesion between constitutive elements – Test methods
VDI/VDE 5570 BLATT 4:2018 Testing of assembled and unassembled plastic optical fibers (POF) — Performance balance
AWWA WQTC63953 Understanding the Relationship between Organic Precursor Fractions and Formation of NDMA and CNX in a Groundwater Supply
CEI EN IEC 61189-5-502:2021 Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 5-502: General test methods for materials and assemblies – Surface insulation resistance (SIR) testing of assemblies

Association Francaise de Normalisation

NF EN ISO 3503:2015 Plastic piping systems - Mechanical assemblies between fittings and pressure tubes - Test method for tightness under internal pressure of assemblies subjected to curvature
NF EN ISO 252:2023 Courroies transporteuses - Adhérence entre éléments constitutifs - Méthodes d'essai
FD X50-138:2006 Project management - Time-related management - Organisation, Planing, Coordination
NF ISO 14960-1:2014 Pneumatiques sans chambre - Valves et composants - Partie 1 : méthodes d'essai
NF L90-200-70-04*NF EN 16602-70-04:2015 Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies
NF L90-300-20-08*NF EN 16603-20-08:2016 Space engineering - Part 20-08 : photovoltaic assemblies and components
NF C20-700-2-39*NF EN 60068-2-39:2016 Environmental testing - Part 2-39 : tests - Tests and guidance : combined temperature or temperature and humidity with low air pressure tests
NF T47-101*NF EN ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test method
NF EN ISO 12777-3:2003 Pallet assembly test methods – Part 3: determination of strength of pallet assemblies

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T A.6-1998 Cooperation and Exchange of Information between ITU-T and National and Regional Standards Development Organizations - Series A: Organization of the Work of the ITU-T (Study Group TSAG; 10 pp)
SERIES G SUPP 65-2018 Simulations of transport of time over packet networks (Study Group 15)
ITU-T X.39-1992 Procedures for the Exchange of Control Information and User Data between a Facsimile Packet Assembly/Disassembly (FPAD) Facility and a Packet Mode Data Terminal Equipment (DTE) or Another FPAD (Study Group VII) 20 pp
ITU-T F.184 (REV 1)-1993 Operational Provisions for the International Public Facsimile Service between Subscriber Stations with Group 4 Facsimile Machines (Telefax 4) (Study Group I) 12 pp
ITU-T G.8271.1-2017 Network limits for time synchronization in packet networks (Study Group 15)

HU-MSZT

MSZ 16225/1-1978 Internal combustion and electric trolley grouping and concept definition
MSZ KGST 1929-1979 Sound isolation test in a ringing room

Spanish Association for Standardization (UNE)

UNE-EN ISO 252:2023 Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE 53-622-1989 Characteristics and testing methods of joint sealing materials between construction components
UNE-EN 16603-20-08:2014 Space engineering - Part 20-08: Photovoltaic assemblies and components (Endorsed by AENOR in October of 2014.)
UNE-EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
UNE 18123:1963 FLAT CONVEYORS COMPOSED OF RUBBER AND CLOTH. ADHERENCE TEST AMONG THE CLOTHS.
UNE-EN 713:1994 PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING.
UNE-EN 88528-11:2004 Reciprocating internal combustion engine driven alternating current generating sets -- Part 11: Rotary uninterruptible power systems - Performance requirements and test methods (Endorsed by AENOR in October of 2004.)

American National Standards Institute （ANSI)

ANSI/ASTM F948:1994 Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow
ANSI/ASHRAE 124-2007(2016) Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances
ANSI/AIAA S-096-2004 Space Systems - Flywheel Rotor Assemblies

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/R 75-04 E-1986 Exchange of Data between Administrations and between Administrations and International Organisations Relating to Space Systems
CEPT T/R 75-04 E-1988 Exchange of Data between Administrations and between Administrations and International Organizations Relating to Space Systems (Odense 1986)

Japanese Industrial Standards Committee (JISC)

JIS K 3824:2012 Testing methods for determining endotoxin rejection of ultrafiltration modules
JIS K 3824:1990 Testing methods for endotoxin rejection of ultrafiltration modules
JIS B 8008-8:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
JIS E 4044:1999 General rules for the test methods of diesel locomotives on completion of construction

Korean Agency for Technology and Standards (KATS)

KS P 4402-2007 Test lens set
KS M ISO 14960-1-2021 Tubeless tyres ─ Valves and components ─ Part 1: Test methods
KS M ISO 14960-1:2016 Tubeless tyres ─ Valves and components ─ Part 1: Test methods
KS G 3406-1994 Assembly middle insole of shoes
KS F 2268-1-2014 Fire resistance test for door assemblies
KS M ISO 12625-8:2020 Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
KS X ISO 13419-2004(2009) Space data and information transfer systems－Packet telemetry
KS M ISO 12625-8:2014 Tissue paper and tissue products — Part 8 : Water-absorption time and water-absorption capacity, basket-immersion test method

KR-KS

KS P 4402-2007(2022) Test lens set
KS M ISO 12625-8-2020 Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

OPINION 56-1-1986 Location of Interface between CCIR Study Group 4 and CCITT Responsibilities for Digital Network Recommendations (Study Group 4)
RESOLUCIÓN 9-2 SPANISH-2003 Coordinación y colaboración con otras organizaciones

International Organization for Standardization (ISO)

ISO 13951:2015 Plastics piping systems - Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
ISO 13951:2001 Plastics piping systems - Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
ISO/TS 37008:2023 Internal investigations of organizations — Guidance
ISO/DIS 14620-4:2024 Space systems — Safety requirements — Part 4: Spacecraft assembly, integration, and test
ISO 1085:1974 Combinations of double-ended wrench gaps
ISO/IEC 10589:1992/Amd 2:1999 Information technology — Telecommunications and information exchange between systems — Intermediate system to Intermediate system intra-domain routeing information exchange protocol for use in conjunc

International Telecommunication Union (ITU)

ITU-T A.6 CHINESE-2002 Cooperation and exchange of information between ITU-T and national and regional standards development organizations
ITU-T A.6 RUSSIAN-2002 Cooperation and exchange of information between ITU-T and national and regional standards development organizations
ITU-T Z.169-2015 Testing and Test Control Notation version 3: Using XML schema with TTCN-3 (Study Group 17)
ITU-T Z.144 SPANISH-2006 Testing and Test Control Notation version 3 (TTCN-3): Runtime interface (TRI)
ITU-T A.6 SPANISH-2012 Cooperation and exchange of information between the ITU Telecommunication Standardization Sector and national and regional standards development organizations
ITU-T A.6 FRENCH-2012 Cooperation and exchange of information between the ITU Telecommunication Standardization Sector and national and regional standards development organizations
ITU-T A.6-2012 Cooperation and exchange of information between the ITU Telecommunication Standardization Sector and national and regional standards development organizations (Study Group Assembly)
ITU-T N.13 FRENCH-1988 MEASUREMENTS TO BE MADE BY THE BROADCASTING ORGANIZATIONS DURING THE PREPARATORY PERIOD
ITU-T N.13 SPANISH-1988 MEASUREMENTS TO BE MADE BY THE BROADCASTING ORGANIZATIONS DURING THE PREPARATORY PERIOD
ITU-T SERIES H SUPP 8-2008 Gateway control protocol: Guidelines for synchronized time in ITU-T H.248 domains Study Group 16
ITU-T Y.1366-2012 Time and phase synchronization aspects of packet networks (Study Group 15)
ITU-T G.8271-2012 Time and phase synchronization aspects of packet networks (Study Group 15)

Society of Automotive Engineers (SAE)

SAE J1802-1-2011 Test Component Specification
SAE J1802/1-2011 Test Component Specifications
SAE J1802/1-1996 Test Component Specification
SAE J1802/1-2016 Test Component Specifications
SAE J1802/1-2003 Test Component Specification
SAE USCAR34-2022 SPECIFICATION FOR TESTING AUTOMOTIVE LAMP ASSEMBLIES

SAE - SAE International

SAE J1802-1-1996 Test Component Specifications
SAE J1802-1-2016 Test Component Specifications
SAE J1802-1-2003 Test Component Specifications

(U.S.) Ford Automotive Standards

FORD FLTM BN 013-3-2001 TEST METHOD FOR UNITIZED SEAT COVER ASSEMBLIES
FORD FLTM BI 123-3-2005 COMPONENT CORROSION TEST
FORD WSS-M99P32-D1-2015 PERFORMANCE, ACOUSTICAL AND INSULATORS, INTERIOR ASSEMBLIES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P32-E1-2020 PERFORMANCE, ACOUSTICAL AND INSULATORS, INTERIOR ASSEMBLIES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15J17-A1-2013 PAINT, ONE COMPONENT COLOR BASECOAT/TWO COMPONENT CLEARCOAT FOR PLASTIC, INTERIOR, HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15P4-F-2012 ASSEMBLY PERFORMANCE, HARD MOLD-IN-COLOR INTERIOR COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A***

GM Daewoo

GMKOREA EDS-T-2607-2010 Wheelset testing procedures
GMKOREA EDS-T-3219-2012 Door lock assembly testing standards
GMKOREA EDS-T-3246-2012 Door lock assembly testing standards
GMKOREA EDS-T-3245-2012 Test Standard for Door Check Assembly

U.S. Air Force

AIR FORCE A-A-58032 VALID NOTICE 1-2012 Test Set, Electrical Power
AIR FORCE A-A-59283 A VALID NOTICE 1-2012 Test Set, Transmission Line
AIR FORCE A-A-58073 VALID NOTICE 1-2012 Test Set, Ultrasonic
AIR FORCE A-A-58012 VALID NOTICE 1-2012 Test Set, Interface Bus
AIR FORCE A-A-59407 A VALID NOTICE 1-2012 Test Set Group, Radio
AIR FORCE A-A-59407 A-1999 TEST SET GROUP, RADIO

American Society for Testing and Materials (ASTM)

ASTM RR-E33-1002 1986 E1111-Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
ASTM F948-94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94(2001) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM E1111/E1111M-14(2022) Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
ASTM F471-76(1996) Standard Terminology Relating to Combination Locks

Association of German Mechanical Engineers

DVS 2212-1-1981 Plastic Welder Test; Test Group I
DVS 2212-1-2005 Plastic Welding Machine Test Test Group I and II

VDI - Verein Deutscher Ingenieure

VDI 2059 Blatt 5-1981 Shaft vibrations of hydraulic turbine sets; measurement and evaluation
VDI 2059 Blatt 5-1982 Shaft vibrations of hydraulic machine sets; measurement and evaluation
VDI 2059 Blatt 4-1979 Shaft vibrations of gas turbine sets; measurement and evaluation
VDI/VDE 5570 Blatt 2-2003 Testing of connectorised and non-connectorised polymer optical fibres - Testing of optical parameters
VDI/VDE-EE 5570 BLATT 2-2019 Testing of connectorised and non-connectorised polymer optical fibres (POF) - Testing of optical parameters
VDI/VDE 5570 Blatt 4-2003 Testing of connectorised and non-connectorised polymer optical fibres - Power budget
VDI/VDE 5570 BLATT 4-2018 Testing of connectorised and non-connectorised polymer optical fibres (POF) - Power budget

AIAA - American Institute of Aeronautics and Astronautics

S-110-2005 Space Systems Structures@ Structural Components@ and Structural Assemblies
S-096-2004 Space Systems Flywheel Rotor Assemblies

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.5.1.3-1998 IPC-B-25 - Multipurpose Test Board - Side 1 and Side 2

GM North America

GM GM2210M-1988 Decorative Interior Wood Components
GM GMT-89.102-1973 Performance Requirements and Test for Tubeless Tire Valve Assemblies

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1194.5:1996 Winding wires - Test methods

Danish Standards Foundation

DS/EN 17038-2:2021 Pumps – Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units – Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
DS 1028:1982 Single-leafed interior doors. Modular sizes
DS/EN 14777:2004 Space engineering - Multipaction design and test
DS/IEC TS 63209-1:2021 Photovoltaic modules – Extended-stress testing – Part 1: Modules
DS/EN ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test methods

United States Navy

NAVY MIL-P-85484 VALID NOTICE 1-1991 POD-TRAY SUBASSEMBLY, SIMULATING SET
NAVY MIL-P-85484-1982 POD-TRAY SUBASSEMBLY, SIMULATING SET

Construction department of Hebei province

DB13(J) 71-2007 Static load test combined pull anchor inner support technical specification

GSO

GSO ISO 8273:2007 Doors and Doorsets -- Standard atmospheres for testing the performance of doors and doorsets placed between different climates
BH GSO IEC TS 63209-1:2023 Photovoltaic modules - Extended-stress testing - Part 1: Modules
GSO ISO 8269:2007 Doorsets - Static loading test
GSO ISO 3870:2013 Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials -- Adjustment of take-up device
GSO ISO 9380:2007 Doorsets - Repeated torsion test

Lithuanian Standards Office

LST EN 14777-2004 Space engineering - Multipaction design and test

U.S. Military Regulations and Norms

ARMY MIL-C-70576 B-1993 CIRCUIT ASSEMBLY, BUILT-IN-TEST DISTRIBUTION BOX (PIVADS): 9360925
ARMY MIL-C-46919 A-1965 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A VALID NOTICE 1-1990 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A (1)-1981 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-46919 A NOTICE 2-1996 CARTRIDGE, ILLUMINATION, M301A2 WITH FUZE, TIME, M84 FOR 81MM MORTARS LOADING, ASSEMBLING AND PACKING
ARMY MIL-T-48321 (1)-1975 TEST SET, BATTERY FOR M56 MINE
ARMY MIL-T-48321 NOTICE 2-1997 TEST SET, BATTERY FOR M56 MINE
ARMY MIL-T-48321-1974 TEST SET, BATTERY FOR M56 MINE

US-FCR

FCR VA 23 73 00-2011 INDOOR CENTRAL-STATION AIR-HANDLING UNITS
FCR UFGS-23 73 00.00 40-2006 INDOOR CENTRAL-STATION AIR-HANDLING UNITS

US-VA

VA 23 73 00-2011 INDOOR CENTRAL-STATION AIR-HANDLING UNITS

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 30-1995 Methods of Testing Liquid-Chilling Packages
ASHRAE 127-2007 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners P/C: 02/2009

PL-PKN

PN BN 7442-05-1965 Composing materia? Testing of type lin?

Indonesia Standards

SNI 04-3508-1994 Facsimile machines group II and III
SNI 19-3002-1992 Standard atmosphere for room conditional and testing

South African Bureau of Standard

SANS 8528-6:1993 Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods
SANS 8528-6:2008 Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods

GM Europe

GME8748-2007 Messung der Nachhallzeit im Fahrzeug Reverberation Time Measurement in the Vehicle English/German; This specification may be applied only for current projects incl. Global Epsilon e (37

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 522-1977 IEEE Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines - For Trail Use

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TR 50670-2016 External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s)

SE-SIS

SIS SS 81 73 25-1988 Light internal wood doorsets - Sizes
SIS SS 81 73 25-1981 Light internal wood doorsets - Sizes

SG-SPRING SG

SS 316-1986 SPECIFICATION FOR Testing And Rating Room Air Conditioners

ETSI - European Telecommunications Standards Institute

ETR 011-1990 Network Aspects (NA); the Relationship Between Network Component Performance and the Overall Network Performance

Others: between-group experiment and within-group experiment,Within-group experiment vs. between-group experiment,between-group test within-group,Within-group testing vs. between-group testing,Between-group comparison vs. within-group comparison