zero current potential

zero current potential, Total:138 items.

The international standard classification for "zero current potential" includes: Electrical and electronic testing , Measurement of electrical and magnetic quantities , Electrical and electronic equipment , Electricity. Magnetism. Electrical and magnetic measurements , Plant growing .

The Chinese standard classification for "zero current potential" includes: Relay protection and automatic device , AC/DC electrical instrument recording instrument , Electronic and electrical equipment , Electromagnetic Measurement , Separating machinery , Electrochemical power source .

Professional Standard - Machinery

JB/T 3347-1996 Negative Sequence, Zero Sequence Current Increase Relay
JB/T 8223.6-1999 Elements for electrical instrumentation.Zero adjuster
JB/T 12642.9-2016 Progressive dies for motor cores. Components. Part 9: Limited posts
JB/T 12198-2015 Zero level calibrator
JB/T 8611-1997 DC potentiometer
JB/T 9566-1999 Technical Specification for Zero Sequence Current Direction Protection Equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3927-1983 Direct-current potentiometers
GB/T 28672-2012 The technical specifications for remanufacturing of automotive components—Alternator
GB/T 3927-2008 Direct-current potentiometers

National Metrological Verification Regulations of the People's Republic of China

JJG 505-2004 Verification Regulation of D.C.Comparator potentiometers
JJG 123-2004 Verification Regulation of D.C. potentiometers
JJG 505-1987 Verification Regulation of D.C.Comparator Potentiometers

Group Standards of the People's Republic of China

T/GZBZ 52.2-2024 E-commerce logistics job requirements Part 2: Supervisor
T/WZSJD 2301-2023 Open-close zero sequence current mutual inductor
T/GZBZ 52.1-2024 Job requirements for e-commerce logistics Part 1: Specialist
T/GZBZ 52.3-2024 Job requirements for e-commerce logistics Part 3: Manager

Taiwan Provincial Standard of the People's Republic of China

CNS 12865.3-1991 Method of Test for Digital Microelectronics ( Low Level Input Current )
CNS 12865-4-1991 Method of Test for Digital Microelectronics ( High Level Input Current )
CNS 12128-1987 General Rules for Methods of Potentiometric, Amperometric, and Coulometric Titrations
CNS 12865.4-1991 Method of Test for Digital Microelectronics ( High Level Input Current )
CNS 12128 General principles of potentiometric, current and coulometric titrations
CNS 12865-3-1991 Method of Test for Digital Microelectronics ( Low Level Input Current )

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37617-2019 Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement

Professional Standard - Railway

TB/T 2075.4-2010 Fittings for overhead contact system in electrification railway Part 4: Non-limited steady device
TB/T 2075.19-2002 Fittings for overhead contact system of electrification railway-Part 19:Steady arm for curve line
TB/T 2075.24-2002 Fittings for overhead contact system of electrification railway-Part 24:Eye end holder for tuble
TB/T 2075.25-2002 Fittings for overhead contact system of electrification railway-Part 25:Eye end holder for tuble,height 200
TB/T 2075.21-2002 Fittings for overhead contact system of electrification railway-Part 21:Steady tube
TB/T 2075.17-2002 Fittings for overhead contact system of electrification railway-Part 17:Steadyarm
TB/T 2075.13-2002 Fittings for overhead contact system of electrification railway-Part 13:Steady clamp
TB/T 2075.16-2002 Fittings for overhead contact system of electrification railway-Part 16: Eye end clamp for strands
TB/T 2075.18-2002 Fittings for overhead contact system of electrification railway-Part 18:Steady arm T-type
TB/T 2075.3-2010 Fittings for overhead contact system in electrification railway Part 3: Limited steady device
TB/T 2075.20-2002 Fittings for overhead contact system of electrification railway-Part 20:Steady arm for curve line t-type

国家铁路局

TB/T 3252-2022 Electrified railway rigid suspension contact network busbars and components
TB/T 2075.4-2020 Fittings for overhead contact system in electrification railway—Part 4 : Non-limited steady device
TB/T 2075.3-2020 Fittings for overhead contact system in electrification railway—Part 3 : Limited steady device

工业和信息化部

JB/T 13620.5-2018 Hot-runner systems of injection mould for plastics-Components-Part 5: Manifold locators

Professional Standard - Electricity

DL 482-1992 Technical conditions for static zero-sequence current protection device
DL/T 253-2012 Measurement Method for Earth Resistance,Ground Potential Distribution,Step Voltage and Current Dividing on Earth Electrodes

Professional Standard - Business

SB/T 11124-2015 General specification for retail electronic scale for traceability of meat and vegetable

Professional Standard - Light Industry

QB/T 2459.4-2011 Parts for alkaline zinc-manganese dioxide batteries –Part 5: Support ring
QB/T 2459.4-2022 Parts for alkaline zinc-manganese dioxide batteries Part 4: Current collector

HU-MSZT

MSZ KGST 2416-1977 DC potentiometer
MSZ 9880/5-1982 High current rotatable fuse (wire) parts head
MSZ 9880/6-1982 High current rotatable fuse (wire) soluble parts

International Organization for Standardization (ISO)

ISO/DIS 13100 Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials
ISO 14621-1:2019 Space systems — Electrical, electronic and electromechanical (EEE) parts — Part 1: Parts management

SCC

DANSK DS/ISO 13100:2024 Methods for zeta potential determination – Streaming potential and streaming current methods for porous materials
SPC GB/T 37617-2019 Test methods for Zeta potential of nanofiltration membrane surface -- Streaming potential measurement (TEXT OF DOCUMENT IS IN CHINESE)
AENOR UNE-EN 61829:2016 Photovoltaic (PV) generator. In situ measurement of current-voltage characteristics.
UNE 21086:1972 DISTINCTIVE SIGNS AND COLOURS OF ALTERNATING CURRENT PHASE AND DIRECT CURRENT POLARITY ROTATIONAL SENSE
AENOR UNE 21086:1972 Colors and distinctive signs of the rotational direction of phases in alternating current and polarities in direct current.
DANSK DS/EN 61481:2002 Live working - Portable phase comparators for voltages of 1 kV to 36 kV a.c.
UNE-EN 61481:2002 Live working - Portable phase comparators for voltages of 1 kV to 36 kV a.c.

British Standards Institution (BSI)

BS ISO 13100:2024 Methods for zeta potential determination. Streaming potential and streaming current methods for porous materials
BS EN 60523:1980 Direct-current potentiometers
BS EN 60523:1993 Direct-current potentiometers
23/30433745 DC BS ISO 13100. Methods for zeta potential determination. Streaming potential and streaming current methods for porous materials
BS EN 61000-3-2:2006 Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
BS ISO 14621-1:2019 Space systems. Electrical, electronic and electromechanical (EEE) parts - Parts management
BS EN 61188-7:2017 Printed boards and printed board assemblies. Design and use. Electronic component zero orientation for CAD library construction
BS EN 61188-7:2009 Printed boards and printed board assemblies. Design and use. Electronic component zero orientation for CAD library construction
BS 1745:1951 Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position)
BS EN IEC 60730-2-15:2019 Automatic electrical controls. Particular requirements for automatic electrical air flow, water flow and water level sensing controls
BS EN 61481:2002 Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c

RU-GOST R

GOST IEC 60523-2014 Direct-current potentiometers
GOST 21106.6-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Measurement methods of currents of anode and grids, having positive voltage relative to cathode and zero anode and grids currents
GOST 23089.3-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators zero offset voltage and emf
GOST 19438.12-1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential
GOST 23089.8-1983 Integrated circuits. Method of measuring the operational amplifiers average temperature voltage drift and zero offset emf

German Institute for Standardization

DIN EN 60523:1994 Direct-current potentiometers (IEC 60523:1975 + A1:1979 + Corrigendum 1980); German version EN 60523:1993
DIN EN 60524/A2:1999 Direct-current resistive volt ratio boxes; Amendment A2 (IEC 60524:1975/A2:1997); German version EN 60524:1993/A2:1997
DIN 48173:1959-11 Power current overhead lines, rated voltage below 1 kV; roof anchorage, compilation, piece parts
DIN SPEC 70121:2014 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
DIN SPEC 70121:2012 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
DIN EN 60523:1994-08 Direct-current potentiometers (IEC 60523:1975 + A1:1979 + Corrigendum 1980); German version EN 60523:1993
DIN EN 60523/A2:1999-01 Direct-current potentiometers; Amendment A2 (IEC 60523:1975/A2:1997); German version EN 60523:1993/A2:1997

Danish Standards Foundation

DS/EN 60523/A2:1998 Direct-current potentiometers
DS/EN 60523:1996 Direct-current potentiometers

GSO

OS GSO IEC 60523:2002 Direct-current potentiometers
GSO IEC 60523:2002 Direct-current potentiometers
GSO IEC TS 60479-2:2010 Effects of Current Passing Through the Human Body, Part 2: Special Aspects

Association Francaise de Normalisation

NF EN 60523/A2:1998 Potentiomètres à courant continu
NF C42-163*NF EN 60523:1993 Direct-current potentiometers.
NF EN 60523:1993 Potentiomètres à courant continu
NF C42-163/A2*NF EN 60523/A2:1998 Direct-current potentiometers
NF C91-003-2/A2:1998 Electromagnetic compatibility. Limits. Limits of radiated harmonic current (equipment input current is 16A/phase). Modification A2
NF C91-003-2/A1:1998 Electromagnetic compatibility. Limits. Limits of radiated harmonic current (equipment input current is 16A/phase). Modification A1

BE-NBN

NBN-EN 60523-1994 Direct-current potentiometers

AENOR

UNE-EN 60523/A2:1999 DIRECT-CURRENT POTENTIOMETERS
UNE-EN 60523:1996 DIRECT-CURRENT POTENTIOMETERS.

Korean Agency for Technology and Standards (KATS)

KS C IEC 60523-2023 Direct-current potentiometers
KS C IEC 60523-2013(2018) Direct-current potentiometers
KS C IEC 60523:2013 Direct-current potentiometers
KS M 0034-2008 General rules for methods of potentiometric, amperometric, coulometric and Karl-Fischer titrations
KS M 0034-2013 General rules for methods of potentiometric, amperometric, coulometric and Karl-Fisher titrations
KS C IEC 61481:2005 Live working-Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.

KR-KS

KS C IEC 60523-2013(2023) Direct-current potentiometers

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO D609-2001 Automotive Parts - Current Capacity of Low Tension Cables
JASO D609-2017 Automotive Parts - Current Capacity of Low Tension Cables

International Electrotechnical Commission (IEC)

IEC 60523/AMD1/COR1:1980 Direct-current potentiometers
IEC 60523:1975 Direct-current potentiometers
IEC 60523:1975/AMD2:1997 Amendment 2 - Direct-current potentiometers
IEC 60523:1975/AMD1:1979 Amendment 1 - Direct-current potentiometers
IEC 60523:1975/AMD1:1979/COR1:1980 Corrigendum 1 to Amendment 1 - Direct-current potentiometers

European Committee for Standardization (CEN)

prEN 60523-1992 Direct-current potentiometers (IEC 523:1975 + A1:1979)
HD 613 S1-1992 Direct-current potentiometers (IEC 523:1975 + A1:1979 + corrigendum 1980)

IN-BIS

IS 1765-1980 DC Potentiometer Specifications

IEC - International Electrotechnical Commission

IEC 60523/COR1:1980 Direct-current potentiometers (Edition 1.0)

CZ-CSN

CSN 35 6421-1984 D.C. Potenciomotors. Methuds of vorification

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 2720-2021 Guide for Rail Potential Management for DC Electrification Systems
IEEE Std 2720-2021 IEEE Guide for Rail Potential Management for DC Electrification Systems

U.S. Air Force

AIR FORCE AN5786 REV 2 VALID NOTICE 1-1993 TRANSMITTER-POSITION, 28 VOLT DC
AIR FORCE MIL-T-5583 C (1)-1994 TRANSMITTER, POSITION, 28 VOLTS DC
AIR FORCE AN5786 REV 2 NOTICE 2-1996 TRANSMITTER-POSITION, 28 VOLT DC
AIR FORCE MIL-T-5583 C-1987 TRANSMITTER, POSITION, 28 VOLTS DC
AIR FORCE MIL-T-5583 C NOTICE 1-1996 TRANSMITTER, POSITION, 28 VOLTS DC
AIR FORCE AN5786 REV 2-1987 TRANSMITTER-POSITION, 28 VOLT DC

ES-AENOR

UNE 21 086 Distinguishing colors and markings of direction of rotation at AC phase and DC electrodes

NL-NEN

NEN 10523-1993 Direct-current potentiometers (IEC 523:1975+A1:1979+C1:1980)

Defense Logistics Agency

DLA SMD-5962-94662-1995 MICROCIRCUIT, LINEAR, 10-BIT, VOLTAGE OUTPUT, D/A CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-93060 REV E-2001 MICROCIRCUIT, LINEAR, A/D CONVERTER, 12-BIT, MONOLITHIC SILICON
DLA SMD-5962-90508 REV D-2004 MICROCIRCUIT, LINEAR, HIGH SPEED, 8-BIT, A/D CONVERTER, MONOLITHIC SILICON

American Society for Testing and Materials (ASTM)

ASTM A566-68 Test Method for Alternating-Current Magnetic Properties of Materials Using the Alternating Current Potentiometer and 25-cm Epstein framemed>
ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C37.114-2004 Guide for Determining Fault Location on AC Transmission and Distribution Lines
IEEE C37.114-2014 Guide for Determining Fault Location on AC Transmission and Distribution Lines

RO-ASRO

STAS 11080-1978 DIRECT-CURRENT POTENTIO- METERS General technical requirements for quality

U.S. Military Regulations and Norms

ARMY MS24542 REV H-1987 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 160 DEG.-320 DEG. F
ARMY MS24542 REV H VALID NOTICE 2-2000 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 160 DEG.-320 DEG. F
ARMY MS24543 REV H-1985 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 120 DEG. -240 DEG. F
ARMY MS24543 REV H VALID NOTICE 2-2000 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 120 DEG. -240 DEG. F
ARMY MIL-W-45992 A NOTICE 2-1998 WELDING MACHINE, ARC, DIRECT CURRENT(DC), CONSTANT CURRENT(CC), CONSTANT VOLTAGE(CV), 350 AMPERE, DIESEL ENGINE DRIVEN (DED), BASE
ARMY MIL-W-45992 A-1986 WELDING MACHINE, ARC, DIRECT CURRENT(DC), CONSTANT CURRENT(CC), CONSTANT VOLTAGE(CV), 350 AMPERE, DIESEL ENGINE DRIVEN (DED), BASE
ARMY MIL-W-45992 A VALID NOTICE 1-1992 WELDING MACHINE, ARC, DIRECT CURRENT(DC), CONSTANT CURRENT(CC), CONSTANT VOLTAGE(CV), 350 AMPERE, DIESEL ENGINE DRIVEN (DED), BASE

Lithuanian Standards Office

LST EN 60523+A2-2000 Direct-current potentiometers (IEC 60523:1975+A1:1979+AC:1980+A2:1997)