Three Point Bend Test International

Three Point Bend Test International, Total:168 items.

The international standard classification for "Three Point Bend Test International" includes: Raw materials and raw glass , Other rubber and plastics products , Refractories , Advanced ceramics , Plastics in general , Paper and board .

The Chinese standard classification for "Three Point Bend Test International" includes: Ceramic and glass in general , Other rubber products , Fireproof material in general , Special ceramics , Papermaking in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending

未注明发布机构

ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
DIN EN 1966 E:2008-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods
GB/T 22906.6-2008 Testing of cores—Part 6:Determination of bending strength by three-point method
GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method

American Society for Testing and Materials (ASTM)

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
AENOR UNE-ISO 11093-6:2017 Paper and paperboard. Mandrel test. Part 6: Determination of flexural strength by the three-point method.
UNE 57163-7:2004 Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending
DIN 51902 E:2020 Draft Document - Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DANSK DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
BS DD ENV 1966:1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
AENOR UNE 57163-7:2004 Paper and cardboard cores. Part 7: Determination of flexural strength using the three-point method.
UNE-EN 1966:2003 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NS-EN 1966:2009 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
DANSK DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
10/30205404 DC BS ISO 5628. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
VDI 3431-2016 Bending of profiles — Testing instructions for profile bent components
07/30046990 DC BS ISO 1288-3. Glazing in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four point bending)
NS-EN 1966:2002 Structural adhesives — Characterisation of a surface by measuring adhesion by means of the three point bending method
DIN ISO 11093-7 E:2011 Draft Document - Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
AENOR UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

RU-GOST R

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

GSO

BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
OS GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
OS GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 11093-7:2015 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
OS GSO ISO 899-2:2016 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
GSO ISO 899-2:2016 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
BH GSO ISO 1288-3:2022 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)

International Organization for Standardization (ISO)

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 11093-7:1997 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO/DIS 899-2:1968 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading

Korean Agency for Technology and Standards (KATS)

KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS L 2401-2019 Testing method for annealing point and strain point of glass by beam bending
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
KS L 2401-1995 Testing method for annealing point and strain point of glass by beam bending
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 899-2-2021 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading

Association Francaise de Normalisation

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF EN 1288-3:2000 Glass in construction - Determination of the resistance of glass to bending - Part 3: tests with specimens supported at two points (four-point bending)
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
NF EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion using the three-point bending method
XP CEN/TS 15963:2014 Bitumens and bituminous binders - Determination of the cracking resistance temperature by a 3-point bending test on a notched bar
NF L17-703*NF EN 2746:1998 Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

AT-ON

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

Indonesia Standards

SNI 07-4076-1996 Method of free bend test for butt welded joint

KR-KS

KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE ARP1321-1993 FLEXURE TESTING OF BENT HYDRAULIC TUBING
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

RO-ASRO

STAS 10897/3-1982 BRAZED JOINTS IMPACT BENDING TEST
STAS 5540/8-1988 MECHANICAL TESTS OF FRICTION WELDED BUTT JOINTS Bending test
STAS 777-1988 Tests of metals BEXD TEST

European Association of Aerospace Industries

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1

Association of German Mechanical Engineers

DVS 3101-2-1999 Mechanical testing of ceramic-to-metal connections Four-point bend test

DIN

DIN ISO 11093-7:1998 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:1997)

Japanese Industrial Standards Committee (JISC)

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)

AASHTO - American Association of State Highway and Transportation Officials

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

CEN - European Committee for Standardization

DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method

The American Road & Transportation Builders Association

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

CU-NC

NC 04-17-1968 Bend test for steel

Others: Three-point bending test,Three-point bending strength test,Coating three-point bending test,Three-point bending test results,Metal three-point bending test,three point bending test metal,Three-point bending test of composite materials,Three-point bending test machine