three point bending test metal

three point bending test metal, Total:352 items.

The international standard classification for "three point bending test metal" includes: Raw materials and raw glass , Other rubber and plastics products , Mechanical testing of metals , Other methods of testing of metals , Connecting devices , Testing of metals , Corrosion of metals , Refractories , Aluminium products .

The Chinese standard classification for "three point bending test metal" includes: Ceramic and glass in general , Other rubber products , Metal processing property test method , Metal physical property test method , Metal mechanical property test method , Papermaking in general , Metal chemical property test method , Fireproof material in general , Furniture in general , Metal nondestructive testing method .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32976-2016 Metallic materials—Tubes—Transverse bending test
GB/T 7733-1987 Matals-rotating bar bending corrosion fatigue testing
GB/T 22906.6-2008 Testing of cores—Part 6:Determination of bending strength by three-point method
GB/T 4337-2008 Metallic materials - Fatigue testing - Rotating bar bending method
GB/T 4337-1984 Metals--Rotating bar bending fatigue testing
GB/T 5985-2003 Test method for specific flexivity constant of ther mostat metals
GB/T 244-1997 Metallic materials--Tube--Bend test
GB/T 2107-1980 Metal material--Twisting fatigue test
GB/T 232-2024 Metallic materials—Bend testing method
GB/T 232-1999 Metallic Materials - Bend Test
GB/T 232-2010 Metallic materials—Bend test
GB/T 24298-2009 Standard test method for cross curvature of thermostat metals
GB/T 238-2002 Metallic materials - Wire - Reverse bend test
GB/T 8364-2008 Test methods of thermal flexure of thermostat metals
GB/T 244-2008 Metallic materials - Tube - Bend test
GB/T 4337-2015 Metallic materials―Fatigue testing―Rotating bar bending method
GB/T 14452-1993 Metallic materials－Determination of bending mechanical properties
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 8364-2003 Test method for specific thermal deflection of thermostat metals

Professional Standard - Aviation

HB 5178-1981 Metal sheet (strip) material repeated bending test method
HB 5175-1996 Metal wire repeated bending test method
HB 5175-1981 Metal wire repeated bending test method
HB 5152-1980 Test method for rotational bending fatigue of metals at room temperature
HB 5153-1980 High temperature rotating bending fatigue test method for metals
HB 5178-1996 Metal sheet (strip) material repeated bending test method
HB 5184-1981 Metallic Materials-Tube - Bend Test
HB 5152-1996 Method of Rotating Bending Fatigue Test for Metal at Room Temperature
HB 6140.4-1987 Test Methods for Formability of Sheet Metal - Bending Test
HB 5153-1996 Method of Rotating Bending Fatigue Test for Metal at High Temperature

Taiwan Provincial Standard of the People's Republic of China

CNS 7375-1997 Method of rotating bending fatigue testing of metals
CNS 3940-1999 Bend test pieces for metallic materials
CNS 7376-1997 Method of plane bending fatigue testing of metal plates
CNS 3941-1999 Method of bend test for Metallic materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41049-2021 Test method for flexural properties of fibre metal laminates
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 244-2020 Metallic material—Tube—Bend test method
GB/T 40403-2021 Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method

Professional Standard - Machinery

JB/T 7131-2002 Standard test method for cross curvature of thermostat metals

机械工业部

JB/T 7131-1993 Hot bimetal transverse bend test method

Professional Standard - Agriculture

GB/T 238-1984 Metallic materials-wire-reverse bend test

Professional Standard - Ferrous Metallurgy

YB/T 5349-2006 Metallic materials - Determination of bending mechanical properties
YB/T 5349-2014 Metallic materials. Determination of bending mechanical porperties

PL-PKN

PN H04408-1990 Metals Bend test
PN H04407-1990 Metals Reverse bend testing of sheet and strip
PN-EN ISO 7438-2021-04 E Metallic materials -- Bend test (ISO 7438:2020)

RO-ASRO

STAS 777-1988 Tests of metals BEXD TEST
STAS 1177-1974 Tests of metals REVERSE BEND TESTING OF STEEL WIRES
STAS 5878-1977 Tests of metals ROTATING BAR BENDING FATIGUE TESTING
STAS 12054-1982 TESTING OF METALS BEND TEST OF ON FUSION WELDED PLATINGS
STAS 7737-1990 Tests of metals. Sheets and plates reverse bend test
STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
STAS 8979-1971 Tests of metals SIMPLE BENDING TEST OF STEEL SHEETS AND STRIPS
STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS 9892-1974 Teststs of metals reverse bend testing of copper and copper alloy WIRES
STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS
STAS 10897/3-1982 BRAZED JOINTS IMPACT BENDING TEST
STAS 1750-1990 Tests of metals. Twisting test for wire
STAS 1750-1980 Testing of metals TWISTING TEST FOR WIRE

Danish Standards Foundation

DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
DS 10310:1949 Testing of metals. Bend testing
DS/EN ISO 7438:2020 Metallic materials – Bend test (ISO 7438:2020)
DS/EN ISO 7438:2005 Metallic materials - Bend test
DS/ISO 7438:2020 Metallic materials – Bend test
DS/EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 10232:1994 Metallic materials-Tube(in full section)-Bend test
DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

TR-TSE

TS 205-1977 BEND TESTING OF METALLIC MATERIALS

Korean Agency for Technology and Standards (KATS)

KS B 0803-2001 BEND TEST SPECIMEN FOR METALS
KS B 0804-2001(2006) Metallic materials－Bend test
KS B 0804-2001(2021) Metallic materials－Bend test
KS B 0804-2001(2016) Metallic materials－Bend test
KS B 0804-2021 Metallic materials－Bend test
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS B ISO 8491-2001(2011) Metallic materials Tube(in full section) Bend test
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS B ISO 7801-2015 Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 1143-2003(2018) Rotating bar bending fatigue test for metallic materials
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS B ISO 8491:2001 Metallic materials Tube(in full section) Bend test
KS B ISO 8491-2015 Metallic materials Tube(in full section) Bend test
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS B ISO 1143:2003 Metals－Rotating bar bending fatigue testing
KS B ISO 8491:2015 Metallic materials Tube(in full section) Bend test
KS L 2401-2019 Testing method for annealing point and strain point of glass by beam bending
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS B 0832-1985 Destructive tests on welds in metallic materials-Bend tests
KS B 0832-2001 Destructive tests on welds in metallic materials-Bend tests

British Standards Institution (BSI)

BS EN ISO 7438:2020 Metallic materials. Bend test
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS EN 13523-7:2021 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN ISO 7438:2005 Metallic materials - Bend test
BS 1639:1964(1999) Methods for Bend testing ofmetals
BS EN ISO 7438:2016 Metallic materials. Bend test
23/30445248 DC BS ISO 7801 Metallic materials. Wire. Reverse bend test
BS EN 10232:1994(1999) Metallic Materials - Tube (in Full Section) - Bend Test
BS ISO 1143:2021 Metallic materials. Rotating bar bending fatigue testing
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
BS EN ISO 5173:2023 Destructive tests on welds in metallic materials. Bend tests
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
18/30366891 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS ISO 16540:2015 Corrosion of metals and alloys. Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
20/30404146 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
BS EN ISO 899-2:2024 Plastics. Determination of creep behaviour - Flexural creep by three-point loading
21/30426853 DC BS EN ISO 5173. Destructive tests on welds in metallic materials. Bend tests
20/30425653 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
20/30361190 DC BS ISO 22407. Metallic materials. Fatigue testing. Axial plane bending method

Spanish Association for Standardization (UNE)

UNE-EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN ISO 7438:2006 Metallic materials - Bend test (ISO 7438:2005)
UNE-EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test).
UNE-EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN ISO 7438:2000 METALLIC MATERIALS. BEND TEST (ISO 7438:1985)
UNE 57163-7:2004 Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.
UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

German Institute for Standardization

DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN ISO 7438 E:2018-04 Bending test of metallic materials (draft)
DIN EN ISO 7438 E:2015-06 Bending test of metallic materials (draft)
DIN 51211:1961 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
DIN EN 13523-7 E:2012-10 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998

Association of German Mechanical Engineers

DVS 3101-2-1999 Mechanical testing of ceramic-to-metal connections Four-point bend test

FI-SFS

SFS H.1.36-1965 Metalliputkien taivutuskoe
SFS-ISO 6602 E:1986 This standard is approved in English

CZ-CSN

CSN 42 0401-1978 Bend test of metals
CSN 66 8511-1960 Bend test of glued metals
CSN ISO 7438:1994 Metallic materials.Bend test
CSN 64 0130-1953 Testing the bending of solid non-metallic materials
CSN ISO 8491:1994 Metallic materials.Tube in full section.Bend test
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 64 0124-1953 Testing the bending impact toughness of solid non-metallic materials

American Society for Testing and Materials (ASTM)

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM B478-85(2003) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility

SE-SIS

SIS 11 01 80-1965 Sampling for simple bend testing of metals
SIS SS 11 26 26-1979 Me tallic materials — Simple bend testing
SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
SIS SS 24 11 11-1983 Roofing foils - Testing - Bending at low temperature
SIS 11 26 22-1969 Reverse bend testing of wire
SIS SS 11 26 23-1983 Metallic materials - Strip. Sheet - Reverse bend test
SIS 11 26 12-1967 Simple bend texting of nietals Sheet and strip up to and including S mm

SCC

AENOR UNE 7051:1970 Metal bending test, at room temperature.
NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
DANSK DS/EN ISO 7438:2020 Metallic materials – Bend test (ISO 7438:2020)
NS-EN ISO 7438:2016 Metallic materials — Bend test (ISO 7438:2016)
BS 1639:1964 Methods for bend testing of metals
DANSK DS/ISO 7438:2020 Metallic materials – Bend test
BS EN ISO 7438:2000 Metallic materials. Bend test
NZS 1011:1964 Methods for bend testing of metals
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
DIN 50113 E:2018 Draft Document - Testing of metals - Rotating bar bending fatigue test
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DANSK DS/EN 13523-7:2014 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
AENOR UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
NS-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN ISO 7438 E:2018 Draft Document - Metallic materials - Bend test (ISO/DIS 7438:2018); German and English version prEN ISO 7438:2018
NS-EN ISO 7438:2020 Metallic materials — Bend test (ISO 7438:2020)
NS-EN ISO 7438:2000 Metallic materials — Bend test (ISO 7438:1985)
AENOR UNE-EN ISO 7438:2021 Metal materials. Bending test. (ISO 7438:2020).
NS-EN ISO 7438:2005 Metallic materials — Bend test (ISO 7438:2005)
AENOR UNE-ISO 11093-6:2017 Paper and paperboard. Mandrel test. Part 6: Determination of flexural strength by the three-point method.
NS-EN 10232:1993 Metallic materials — Tube (in full section) — Bend test
NS 10152:1988 Metallic materials — Bend test (ISO 7438:1985 modified)
DANSK DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
BS EN 10232:1994 Metallic materials. Tube (in full section). Bend test
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
NS-EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
NS-EN 13523-7:2001 Coil coated metals — Test methods — Part 7: Resistance to cracking on bending (T-bend test)

Indonesia Standards

SNI 07-0259-1989 Bending experimental test method of metals
SNI 07-0410-1989 Compressed bending test method of metals
SNI 07-4612-1998 Bend tests for metallic material tubes in full section
SNI 07-4611-1998 Reverse bend test for metallic material wires
SNI 07-6524-2001 Test methods of rotating bending fatigue testing of metals
SNI 07-4076-1996 Method of free bend test for butt welded joint
SNI 07-6525-2001 Methods of plane bending fatigue testing of metal plates

American National Standards Institute （ANSI)

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

European Committee for Standardization (CEN)

EN ISO 7438:2016 Metallic materials - Bend test
EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
EN ISO 7438:2005 Metallic materials Bend test
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
CEN EN 13523-7-2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test
EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests

CO-ICONTEC

ICONTEC 1-1980 Bend testing of metal products

PT-IPQ

NP 850-1985 Steel. metallic line. Curvature test

International Organization for Standardization (ISO)

ISO 7438:2005 Metallic materials - Bend test
ISO 7438:2020 Metallic materials — Bend test
ISO 7438:1985 Metallic materials; Bend test
ISO 7438:2016 Metallic materials - Bend test
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 1143:1975 Metals; Rotating bar bending fatigue testing
ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
ISO 1143:2021 Metallic materials - Rotating bar bending fatigue testing
ISO 8491:1986 Metallic materials; Tube (in full section); Bend test

Association Francaise de Normalisation

NF A03-158:2005 Metallic materials - Bend test.
NF A03-158:2016 Metallic materials - Bend test
NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
NF EN ISO 5173:2023 Destructive testing of welds on metallic materials - Bending tests
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF A05-521*NF ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.
NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).

RU-GOST R

GOST R ISO 7438-2013 Mettallic materials. Bend test
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 14019-1980 Metals. Methods of bend tests
GOST 14019-2003 Metallic materials. Bend test method

South African Bureau of Standard

SANS 7438:2009 Metallic materials - Bend test
SANS 7438:2003 Metallic materials - Bend test
SANS 7801:2003 Metallic materials - Wire - Reverse bend test
SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test
SANS 7799:2003 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test

TH-TISI

TIS 2173-2012 Metallic materials.bend test
TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

IT-UNI

UNI EN ISO 7438:2020 Metallic materials - Bend test
UNI 564-1960 Mechanical testing of metal materials. Bending test
UNI 6381-1968 Metal materials for aviation. Bending test

GSO

BH GSO ISO 7438:2022 Metallic materials — Bend test
GSO ISO 7438:2021 Metallic materials — Bend test
BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
OS GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 11093-7:2015 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
OS GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing
OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
OS GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing
GSO ISO 8491:2015 Metallic materials -- Tube (in full section) -- Bend test
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 22407:2024 Metallic materials — Fatigue testing — Axial plane bending method
GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method

Japanese Industrial Standards Committee (JISC)

JIS Z 2248:2022 Metallic materials -- Bend test
JIS Z 2248:2006 Metallic materials -- Bend test
JIS Z 2248:1996 Method of bend test for metallic materials
JIS Z 2204:1996 Bend test pieces for metallic materials
JIS Z 2248 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)
JIS Z 2275:1978 Method of plane bending fatigue testing of metal plates
JIS Z 2274:1978 Method of rotating bending fatigue testing of metals

KR-KS

KS B 0804-2001(2021)(英文版) Metallic materials－Bend test
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS B ISO 1143-2003(2023) Rotating bar bending fatigue test for metallic materials

VN-TCVN

TCVN 198-2008 Metallic materials.Bend test
TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
TCVN 5891-2008 Metallic materials.Tube (in full section).Bend test

GOST

GOST 1579-1980 Wire. Bend test method

BR-ABNT

ABNT MB-5-1939 Bending test of metal materials. Brazilian Standard

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

BE-NBN

NBN I 10-205-1986 Prestressed steel. Alternate bending test of metal wire
NBN-EN 23327-1993 Hardmetals. Determination of transverse rupture strength (ISO 3327: 1982)
NBN-EN 10232-1994 Metallic materials. Tube (in full section). Bend test

CH-SNV

VSM 10850-1973 Testing of metal materials. Technical bend testing of welds

AT-ON

ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

HU-MSZT

MSZ 105/22-1979 Strength testing of metals and alloys in bends

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

IN-BIS

IS 5075-1985 Bending fatigue test method for metal rotating rods

Standard Association of Australia （SAA）

AS 2205.3.2:1988 Methods of destructive testing of welds in metal, Method 3.2: Bend tests - Transverse free bend test
AS 2205.3.3:1988 Methods of destructive testing of welds in metal, Method 3.3: Bend tests - Longitudinal guided bend test
AS 2205.3.1:1988 Methods of destructive testing of welds in metal, Method 3.1: Bend tests - Transverse guided bend test
AS 2205.3.3:1980 Methods of destructive testing of welds in metal, Part 3.3: Bend tests - Longitudinal guided bend test
AS 2205.3.1:1980 Methods of destructive testing of welds in metal, Part 3.1: Bend tests - Transverse guided bend test
AS 2205.3.2:1980 Methods of destructive testing of welds in metal, Part 3.2: Bend test - Transverse free bend test
AS 2505.4:1981 Methods for bend and related testing of metals, Part 4: Wire