Three-point bending test of composite materials

Three-point bending test of composite materials, Total:87 items.

The international standard classification for "Three-point bending test of composite materials" includes: Other materials for the reinforcement of composites , Refractories , Carbon materials , Other rubber and plastics products , Mechanical testing of metals , Materials for aerospace construction .

The Chinese standard classification for "Three-point bending test of composite materials" includes: Basic standards and general methods , Fireproof material in general , Special carbon material , Other rubber products , Metal nondestructive testing method , Metal mechanical property test method , Metal processing property test method , Composite materials and solid fuels .

Professional Standard - Aerospace

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

Professional Standard - Textile

FZ/T 60042-2014 3D braided polymer matrix composites—Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 238-2002 Metallic materials - Wire - Reverse bend test
GB/T 45474-2025 Test method for mode Ⅱ interlaminar fracture toughness of carbon fiber reinforced composite materials—Three point bending method with end notched
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 238-1984 Metallic materials-wire-reverse bend test
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

Professional Standard - Aviation

HB 7624-1998 Test Method for Bending Fatigue of Carbon Fibre Composite Laminated Wood

Professional Standard - Machinery

JB/T 13227-2017 In-situ testing systems of bend-torsional combined mechanical properties for solid materials
JB/T 13223-2017 In-situ testing systems of tensile-bend combined mechanical properties for solid materials

Association Francaise de Normalisation

NF T51-120-3:1995 Plastics and composites - Determination of flexural fatigue properties - - Part 3: Three-point flexural test on unclamped specimens
NF T51-120-4:1995 Plastics and composites - Determination of flexural fatigue properties - Part 4: Four-point flexural test on unclamped specimens
NF T51-120-5:1995 Plastics and composites - Determination of flexural fatigue properties - - Part 5: Constant moment flexural test
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF T51-120-2:1995 Plastics and composites - Determination of flexural fatigue properties - Part 2: Flexural test on clamped specimens
NF EN ISO 14125:1998 Fiber Reinforced Plastic Composites – Determination of Flexural Properties
NF T51-120-6:1995 Plastics and composites - Determination of flexural fatigue properties - - Part 6: Buckling test

American Society for Testing and Materials (ASTM)

ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method

GCC Standardization Organization

GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14125:2015 Fibre-reinforced plastic composites -- Determination of flexural properties

British Standards Institution (BSI)

18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS DD ENV 658-5:1993 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature-Determination of shear strength by short span bend test (three point)
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties

International Organization for Standardization (ISO)

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14679 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading

German Institute for Standardization

DIN 51902:2009-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902 E:2020 Draft Document - Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN V ENV 658-5:1993-02 High-strength ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short-span three-point bending test
DIN EN ISO 14125:1998-06 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

Spanish Association for Standardization (UNE)

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)

Gosstandart of Russia

GOST R 57866-2017 Polymer composites. Determination of flexural properties
GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method

VN-TCVN

TCVN 1826-2006 Metallic materials.Wire.Reverse bend test

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

Korean Agency for Technology and Standards (KATS)

KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14125-2022 Fibre-reinforced plastic composites－Determination of flexural properties

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 14125:2015 Fibre-reinforced plastic composites -- Determination of flexural properties

Ente Nazionale Italiano di Unificazione

EC 1-2004 UNI EN ISO 14125:2000 Fibre-reinforced plastic composites - Determination of flexural properties
UNI SPERIMENTALE ENV 658-5:1993 Advance technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by short span bend test (three-point)

Danish Standards Foundation

DANSK DS/EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method