Fixation reagents and methods

Fixation reagents and methods, Total:395 items.

The international standard classification for "Fixation reagents and methods" includes: Protection against dangerous goods , Chemical reagents , Adhesives , Solid fuels , Aerospace engines and propulsion systems , Laboratory medicine , Winter sports equipment , Lines, connections and circuits .

The Chinese standard classification for "Fixation reagents and methods" includes: Marking, packaging, transport and storage in general , Special electronic technology material , Chemical reagent in general , Adhesives , Composite materials and solid fuels , Spacecraft power system , Medical laboratory equipment , Grain and oil/fat processing machinery , Sports facilities and apparatus , Mobile communication equipment , Telecommunication technical requirements and interface .

Military Standard of the People's Republic of China-General Armament Department

GJB 762.2-1989 Semiconductor device radiation hardening test method gamma total dose irradiation test
GJB 10022-2021 Constant strain test method for composite solid propellants
GJB 10018-2021 Composite solid propellant fixed load test and equilibrium modulus determination method
GJB 772.109-1990 Explosives Test Methods Freezing Point Determination
GJB 771.107-1993 Gunpowder performance test methods Solid propellant tensile strength test
GJB 5026-2003 Fixed station ground and sea clutter test methods
GJB 10021-2021 Composite solid propellant accelerated aging test method
GJB 4636-1993*GJBz 20161.4-1995 Combustible agent performance test method Combustible agent vacuum stability test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9732-1988 Chemical reagent-General method for the determination of ammonium
GB/T 609-1988 Chemical reagent-General method for the determination of total nitrogen
GB/T 616-1988 Chemical reagent-General method for the determination of boiling point
GB/T 615-1988 Chemical reagent-General method for the determination of distillation range
GB/T 9742-1988 Chemical reagent-General method for the determination of silicate
GB/T 9736-1988 Chemical reagent-General method for the determination of acidity and alkalinity
GB/T 9734-2008 Chemical Reagent-General Method for the Determination of Aluminium
GB/T 27823-2011 Chemicals - Test method of acute dermal toxicity - Fixed dose procedure
GB/T 610.1-1988 Chemical reagent-General method for the determination of arsenic
GB/T 611-1988 Chemical reagent-General method for the determination of density
GB/T 21804-2008 Chemicals—Test method of acute oral toxicity-fixed dosed procedure
GB 616-1988 General method for determination of boiling point of chemical reagents
GB/T 605-1988 Chemical reagent--General method for the measurement of colour(in Hazen units)
GB/T 610-2008 Chemical Reagent - General Method for the Determination of Arsenic
GB 9739-1988 General method for the determination of chemical reagent iron
GB/T 9734-1988 Chemical reagent--General method for the determination of aluminium
GB/T 611-2006 Chemical reagent - General method for the determination of density
GB/T 9736-2008 Chemical reagent - General method for the determination of acidity and alkalinity
GB/T 9506.10-1988 Test method for firmness of getter by pressure or sinter
GB/T 605-2006 Chemical reagent - General method for the measurement of colour
GB/T 14074.5-1993 Testing methods for wood adhesives and their resins—Method for determination of solid content
GB/T 14074.7-1993 Testing methods for wood adhesives and their resins—Method for determination of gelation time
GB/T 616-2006 Chemical reagent - General method for the determination of boiling point
GB/T 608-1988 Chemical reagent--General method for the determination of nitrogen
GB/T 6626.4-1986 Test methods for the characteristics of getter-mercury dispenser--Method for peel off test of getter-mercury dispenser
GB/T 9739-1988 Chemical reagent-General method for the determination of iron
GB/T 9732-2007 Chemical reagent—General method for the determination of ammonium
GB/T 9730-1988 Chemical reagent-General method for the determination of oxalates
GB/T 615-2006 Chemical reagent - General method for the determination of distillation range
GB/T 9739-2006 Chemical reagent - General method for the determination of iron

Professional Standard - Chemical Industry

HG/T 3500-1982 Method for Determination of Polarity Constant of Chemical Reagent Gas Chromatography Stationary Liquid
HG/T 3500-2011 Chemical reagent-Test method for polarity constant of liquid stationary phase in gas chromatography

Professional Standard - Commodity Inspection

SN/T 2164-2008 Test method of acute oral toxicity. Fixed dose method for dangerous goods

工业和信息化部

HG/T 6057-2022 Test method for determining activity of fixed-bed palladium-basedanthraquinone hydrogenation catalyst
JC/T 2572-2020 Test method for fixed carbon content of graphite ore

Professional Standard - Aerospace

QJ 1627-1989 固体发动机
QJ 2215A-2005 The items and methods for performance characterization of composite solid propellant
QJ 1360-1988修改单1-1996 Method for Determination of Hardness of Composite Solid Propellants
QJ 20019.2-2011 Composite solid propellant safety performance test method
QJ 1359-1988 Test Method for Explosion Heat of Composite Solid Propellant - Constant Temperature Method
QJ 1468-1988 Test Methods for Initial Thermal Decomposition Temperature and Off Temperature of Composite Solid Propellant
QJ 1616-1989 Method for Determination of Crosslinking Density of Composite Solid Propellant
QJ 2328A-2005 Test method for temperature accelerated aging of composite solid propellant
QJ 1490-1988 Determination Method for Linear Expansion Coefficient of Composite Solid Propellant
QJ 925-1985 Determination Methods for Burning Rate of Composite Solid Propellant Slurry
QJ 924-1985 Uniaxial Tensile Test Methods for Composite Solid Propellant
QJ 20019.4-2011 Composite solid propellant safety performance test method
QJ 913.5-1985 Composite solid propellant (polyether system) pH value determination method
QJ 20019.3-2011 Composite solid propellant safety performance test method
QJ 3039-1998 Test Method for the Drop Hammer Impact Sensitivity of Composite Solid Propellant
QJ 809-1994 Determination Method for Thermal Conductivity and Specific Heat of Composite Solid Propellant ‐ Quasi‐steady State Method
QJ 20019.1-2011 Composite solid propellant safety performance test method
QJ 2275-1992 Determination Method for Specific Heat of Composite Solid Propellant
QJ 1628-1989 固体发动机
QJ 1360-1988 Determination Method for Hardness of Composite Solid Propellant
QJ 3228-2005 Test method for Poissons ratio of composite solid propellant
QJ 2913-1997 Determination Method for Friction Sensitivity of Composite Solid Propellant
QJ 20019-2011 Test method for safety performance of composite solid propellants
QJ 809-1983 Method for determination of thermal conductivity of solid propellants and solid motor insulation
QJ 2328-1992 Test method for temperature accelerated aging of composite solid propellant
QJ 1617-1989 Determination of glass transition temperature of composite solid propellant

Professional Standard - Medicine

YY/T 1206-2013 Total cholesterol kit(COD-PAP method)

Professional Standard - Grain

LS/T 3518-1994 Test Method for Fixed Grain Elevator

Professional Standard - Agriculture

GB 605-1988 Chemical reagent-General method for the measurement of colour(in Hazen units)
GB 9734-1988 General method for the determination of aluminum by chemical reagents
1442药典一部-2020 Bahua Gushen Dingchuan Pills
GB 610.1-1988 General method for the determination of arsenic in chemical reagents (arsenic spot method)
GB 615-1988 Method for determination of boiling range of chemical reagents
GB 608-1988 General method for chemical reagent nitrogen determination
GB 9736-1988 General method for the determination of acidity and alkalinity of chemical reagents
1392药典一部-2015 Bahua Gushen Dingchuan Pills
1196药典一部-2010 Bahua Gushen Dingchuan Pills
GB 9732-1988 General method for the determination of chemical reagent ammonium
SB/T 10207-1994 Test Method for Fixed Grain Elevator
GB 609-1988 General method for the determination of total nitrogen content of chemical reagents

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40940-2021 Snowboard plate-bindings—Requirements and test methods
GB/T 40932-2021 Snowboard step-in bindings—Requirements and test methods
GB/T 611-2021 Chemical reagent—General method for the determination of refractive index

未注明发布机构

ASTM RR-C24-1055 2005 C1635-Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
BS EN ISO 12224-2:2024 Solder wire, solid and flux-cored. Specification and test methods - Determination of flux content
DIN EN 14187-1 E:2014-12 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
ASTM RR-D15-1032 2012 D3321-Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
DIN ISO 8364 E:2016-10 Alpine skis and bindings - Binding mounting area - Requirements and test methods
ASTM RR-C24-1054 2002 C1523-Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
DIN ISO 9462 E:2012-03 Alpine ski-bindings - Requirements and test methods
DIN EN 14187-1 E:2001-09 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34704-2017 Chemical reagent-General method for the determination of aldehyde

Professional Standard - Post and Telecommunication

YD/T 1626-2007 Technical Requirement and Test Methods for Fixed Wireless Telephone
YD/T 1197-2002 Test specification for access network--3.5GHz fixed wireless access

Group Standards of the People's Republic of China

T/SASJL 0046-2024 Test method for acceleration performance of automobile in fixed gear

GSO

BH GSO 2062:2011 Cosmetic Products - Hair Fixative – Test methods
OS GSO 2062:2010 Cosmetic Products - Hair Fixative – Test methods
GSO EN 15250:2011 Slow heat release appliances fired by solid fuel - Requirements and test methods
BH GSO ISO 8364:2017 Alpine skis and bindings -- Binding mounting area -- Requirements and test methods
OS GSO ISO 8364:2016 Alpine skis and bindings -- Binding mounting area -- Requirements and test methods
OS GSO ISO 9462:2016 Alpine ski-bindings -- Requirements and test methods
GSO ISO 8364:2016 Alpine skis and bindings -- Binding mounting area -- Requirements and test methods
BH GSO ISO 9462:2017 Alpine ski-bindings -- Requirements and test methods
GSO ISO 9462:2016 Alpine ski-bindings -- Requirements and test methods
OS GSO ISO 13992:2015 Alpine touring ski-bindings -- Requirements and test methods
BH GSO ISO 13992:2017 Alpine touring ski-bindings -- Requirements and test methods
OS GSO ISO 14573:2015 Snowboard strap bindings for soft boots -- Requirements and test methods
BH GSO ISO 15344:2017 Snowboard step-in bindings -- Requirements and test methods
BH GSO ISO 14573:2017 Snowboard strap bindings for soft boots -- Requirements and test methods
OS GSO ISO 11497:2015 Telemark skis and bindings -- Binding mounting area -- Requirements and test methods
BH GSO ISO 11497:2017 Telemark skis and bindings -- Binding mounting area -- Requirements and test methods
GSO 1045:2000 METHOD OF PREPARATION OF REAGENT SOLUTIONS OF QUANTITATIVE ANALYSIS
GSO ISO 11497:2015 Telemark skis and bindings -- Binding mounting area -- Requirements and test methods
OS GSO ISO 9597:2015 Cement -- Test methods -- Determination of setting time and soundness
GSO ASTM D974:2024 Standard Test Method for Acid and Base Number by Color-Indicator Titration
GSO ASTM D974:2021 Standard Test Method for Acid and Base Number by Color-Indicator Titration
OS GSO ISO 9455-3:2013 Soft soldering fluxes -- Test methods -- Part 3: Determination of acid value, potentiometric and visual titration methods

SCC

SN-CEN/TS 14754-1:2007 Curing compounds — Test methods — Part 1: Determination of water retention efficiency of common curing compounds
NS-EN ISO 3262-3:1998 Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998)
BS DD 147:1987 Method of test for curing compounds for concrete
AS 1352.1:1977 Fixed resistors - Terminology and methods of test
AS K154.7:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 7: Determination of can stability of sealers
BS 5350-G1:1987 Methods of test for adhesives. Tests on anaerobic adhesives-Determination of torque strength of anaerobic adhesives on threaded fasteners
UNE 104281-5-7:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TESTING METHODS. VOLATILE AND FIXED MATERIAL
UNE-EN 14187-1:2004 Cold applied joint sealants - Part 1:Test method for the determination of rate of cure
AS K154.4:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 4: Determination of heat resistance of adhesive bonds
NS-EN 14187-1:2017 Cold applied joint sealants — Test methods — Part 1: Determination of rate of cure
AENOR UNE 104281-5-7:1987 Bituminous and modified bituminous materials. Paints and adhesives. Test methods. Fixed and volatile matter.
AS K154.10:1968 Methods of test for sealers and adhesives (for automotive purposes), Method 10: Determination of damping coefficient - thick plate method
NS-EN 14187-1:2003 Cold applied joint sealants — Part 1:Test method for the determination of rate of cure
AS 1321.10:1980 Methods for the sampling and testing of adhesives, Part 10: Determination of non-volatile matter (solids content) of adhesives
AS K154.9:1969 Methods of test for sealers and adhesives (for automotive purposes), Method 9: Determination of tensile strength of sealers and of structural adhesives
UNE-EN 480-2:1997 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT. TEST METHODS. PART 2: DETERMINATION OF SETTING TIME.
DANSK DS/EN 14187-1:2003 Cold applied joint sealants – Part 1:Test method for the determination of rate of cure
BS PD CEN/TS 16811-3:2015 Winter maintenance equipment. De-icing agents-Other solid and liquid de-icing agents. Requirements and test methods
AS 2925.2:1987 Methods of testing thermosetting laminated sheet, Method 2: Method for assessing appearance
BS 3762-3-3.23:1986 Analysis of formulated detergents. Quantitative test methods-Method for determination of chelating agents content
AENOR UNE 20559-1:1970 Fixed tantalum capacitors, with liquid or solid electrolyte. Definitions and test methods
AS K154.6:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 6: Determination of consistency of sealers by extrudiometer
UNE-EN 1245:1999 ADHESIVES - DETERMINATION OF PH - TEST METHOD
AS 2925.1:1987 Methods of testing thermosetting laminated sheet, Method 1: Method for determining thickness
BS 5350-B4:1993 Methods of test for adhesives. Adhesives-Determination of pot life
AS K154.2:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 2: Determination of initial bond strength of adhesives
IEC 60115-1:1971 Fixed resistors - Part 1: Terms and methods of test
AS K154.6:1970 Methods of test for sealers and adhesives (for automotive purposes), Method 6: Determination by pressure extrudiometer of the consistency of sealers
AS 1321.2:1975 Methods for the sampling and testing of adhesives, Part 2: Corrosive effect of set adhesives on metals
AS K154.5:1968 Methods of test for sealers and adhesives (for automotive purposes), Method 5: Determination of staining of trim materials by adhesives
DIN EN 14187-1 E:2014 Draft Document - Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure; German version prEN 14187-1:2014
AS 2925.6:1987 Methods of testing thermosetting laminated sheet, Method 6: Method for determining dimensional stability
AS 1321.7:1977 Methods for the sampling and testing of adhesives, Part 7: pH value of aqueous extracts of uncured adhesives and of their components, and of cured adhesive films
NS-EN 1245:1998 Adhesives — Determination of pH — Test method
AS 1937.10:1977 Methods of test for sealers and adhesives for automotive purposes - Determination of damping coefficient by the thick plate method
AS K154.3:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 3: Determination of optimum open drying time of adhesives
AS 1937.4:1977 Methods of test for sealers and adhesives for automotive purposes - Determination of heat resistance of adhesive bonds
AS K154.8:1968 Methods of test for sealers and adhesives (for automotive purposes), Method 8: Determination of staining of automotive paintwork by adhesives or sealers
AWPA E19-15 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
CAN 2-19.0-M77-1977 Methods of Testing Putty, Caulking and Sealing Compounds
BS EN 1245:1999 Adhesives. Determination of pH. Test method
AS 1321.4:1975 Methods for the sampling and testing of adhesives, Part 4: Wearing effect of set adhesives on cutting edges
BS 5350-B8:1977 Methods of test for adhesives-Determination of viscosity
AWPA E19-08 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AWPA E19-04 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AWPA E19-16 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives
AWPA E19-22 Standard Method for Determining Preservative Fixation of Inorganic Waterborne Wood Preservatives

Danish Standards Foundation

DS/CEN/TS 14754-1:2007 Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds
DS/EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time

British Standards Institution (BSI)

BS EN 3030:1994 Test method for dry film lubricants - Solids content
BS 7542:1992(2012) Method of test for Curing compounds for concrete
BS 5350-B2:1976 Methods of test for adhesives - Adhesives - Determination of solids content
BS EN 3030:1994(1999) Test method for dry film lubricants — Solids content
BS EN 196-3:2005+A1:2008 Methods of testing cement - Determination of setting times and soundness
BS 1203:2001 Hot-setting phenolic and aminoplastic wood adhesives - Classification and test method
BS ISO 11087:2015 Alpine ski-bindings. Retention devices. Requirements and test methods
BS EN 60068-2-21:1999 Environmental testing - Test methods - Test U. Robustness of terminations and integral mounting devices
BS EN ISO 9455-3:2020 Soft soldering fluxes. Test methods - Determination of acid value, potentiometric and visual titration methods
BS EN ISO 9455-3:1995 Soft soldering fluxes. Test methods. Determination of acid value, potentiometric and visual titration methods
BS 3762-3.18:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of chlorine oxidizing agents content
BS 3762-3.23:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of chelating agents content
BS ISO 8312:2000 Rubber compounding ingredients - Stearic acid - Definition and test methods
BS EN 196-3:2005 Methods of testing cement - Determination of setting time and soundness
BS EN ISO 9455-13:2017 Soft soldering fluxes. Test methods. Determination of flux spattering
BS ISO 8312:2015 Rubber compounding ingredients. Stearic acid. Definition and test methods
BS ISO 8312:1999 Rubber compounding ingredients - Stearic acid - Definition and test methods
BS EN ISO 9455-13:2000 Soft soldering fluxes - Test methods - Determination of flux spattering
BS 812-121:1989 Testing aggregates. Method for determination of soundness
BS ISO 24070-1:2021 Building and civil engineering sealants. Determination of cured thickness of one-component sealant - Taper-shaped groove test method
BS EN 12574-2:2006 Stationary waste containers - Performance requirements and test methods
BS EN 12574-2:2002 Stationary waste containers - Performance requirements and test methods
BS 2000-1:1995 Methods of test for petroleum and its products - Determination of acidity, neutralization value - Colour indicator titration method
BS EN 29455-8:1993 Soft soldering fluxes. Test methods. Determination of zinc content

Korean Agency for Technology and Standards (KATS)

KS M 3821-1987 Testing methods for specific gravity of epoxide resins and hardeners
KS M 3820-2011 General rules for testing methods of epoxide resins and hardeners
KS M 3821-2008 Testing methods for specific gravity of epoxide resins and hardeners
KS M 3821-2023 Testing methods for specific gravity of epoxide resins and hardeners
KS M 3822-2023 Testing methods for viscosity of epoxide resins and hardners
KS M ISO 787-11-2007(2017) General methods of test for pigments and extenders－Part 11：Determination of tamped volume and apparent density after tamping
KS M 5552-1984 METHOD FOR DETERMINING MOISTURE by Test method of turbidity for solvent and thinner
KS R 1153-2012 Seat and seat anchorages test method
KS G ISO 9462-2023 Alpine ski-bindings — Requirements and test methods
KS M 5426-1984 Test methods for fixed vehicle matter of paint
KS G ISO 8364-2019 Alpine skis and bindings — Binding mounting area — Requirements and test methods
KS G ISO 15344-2019 Snowboard step-in bindings－Requirements and test methods
KS F 2216-2000 TESTING METHODS FOR BONDING STRENGTH OF ANCHORING WOODEN BLOCK ADHESIVES
KS M 3829-2023 Testing methods for total amine values of amine－based hardeners of epoxide resins
KS M 3829-2003(2018) Total amine value test method for amine-based hardener of epoxy resin
KS M 5427-1984 Test methods for volatile matter and fixed matter contents of paint
KS G ISO 11087:2018 Alpine ski-bindings — Retention devices — equirements and test methods
KS G ISO 9119:2004 Cross-country skis－Binding mounting area－Requirements and test methods
KS R 1164-2002(2007) Windshield mounting test method in collision
KS M 3829-2003 Testing methods for total amine values of amine－based hardeners of epoxide resins
KS M 3727-1986 Test method for Storage Stability of Adhesives
KS C 6035-2003(2018) Test method for fixed capacitors for electronic devices

Association Francaise de Normalisation

NF EN ISO 3262-3:1998 Fillers for paints - Specifications and test methods - Part 3: fixed white
NF P98-726:2009 Road construction and maintenance equipment - Hydrocarbon binder spraying machine - Dosage measurement and distribution fixed station test bench and method
NF ISO 8364:2018 Alpine skis and bindings - Binding assembly area - Wear requirements and test methods
NF EN ISO 12224-2:1999 Brazing filler wires, solid and flux-incorporated - Specifications and test methods - Part 2: determination of flux content
NF P18-310-2*NF EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2 : determination of setting time
NF S62-191/IN2*NF EN 12416-1/IN2:2007 Fixed firefighting systems - Powder systems - Part 1 : requirements and test methods for components
NF EN 14187-2:2017 Cold applied joint sealants - Test methods - Part 2: determination of curing time
NF ISO 9462:2023 Alpine Ski Bindings – Requirements and Test Methods
NF P98-897-1*NF EN 14187-1:2017 Cold applied joint sealants - Test methods - Part 1 : determination of rate of cure
NF S52-729*NF ISO 8364:2018 Alpine skis and bindings - Binding mounting area - Requirements and test methods
NF S52-745*NF ISO 11497:1998 Telemark skis and bindings. Binding mounting area. Requirements and test methods.
NF ISO 14573:2002 Snowboard bindings for soft shoes - Requirements and test methods
NF ISO 14790:2005 Plate Type Snowboard Bindings – Requirements and Test Methods
NF S52-729:2007 Alpine skis and bindings - Binding mounting area - Requirements and test methods.
NF P15-471-3:2009 Methods of testing cement - Part 3 : determination of setting times and soundness.
NF P15-471-3/IN1:2009 Methods of testing cement - Part 3 : determination of setting times and soundness.
NF EN 480-8:2012 Admixtures for concrete, mortar and grout - Test methods - Part 8: determination of conventional dry extract
NF ISO 13992:2014 Bindings for alpine ski touring - Requirements and test methods
NF EN ISO 9455-3:2020 Soft soldering flux - Test methods - Part 3: determination of acid number by potentiometric and visual titration methods

KR-KS

KS M 3821-2008(2023) Testing methods for specific gravity of epoxide resins and hardeners
KS G ISO 11087-2018 Alpine ski-bindings — Retention devices — equirements and test methods
KS G ISO 11087-2018(2023) Alpine ski-bindings — Retention devices — equirements and test methods

German Institute for Standardization

DIN 55626-3:2007-07 Extenders and pigments for paper and board - Specifications and methods of test - Part 3: Blanc fixe
DIN ISO 11087:2016-05 Alpine ski-bindings - Retention devices - Requirements and test methods (ISO 11087:2015)
DIN ISO 11497:1999 Telemark skis and bindings - Binding mounting area - Requirements and test methods (ISO 11497:1998)
DIN EN 14187-1:2017 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
DIN EN 14187-1:2017-08 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure; German version EN 14187-1:2017
DIN ISO 9462:2015-07 Alpine ski-bindings - Requirements and test methods (ISO 9462:2014) / Note: To be replaced by DIN ISO 9462 (in preparation).
DIN EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time; English version of DIN EN 480-2:2006-11
DIN ISO 11497:1999-01 Telemark skis and bindings - Binding mounting area - Requirements and test methods (ISO 11497:1998)
DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN ISO 13992:2015-07 Alpine touring ski-bindings - Requirements and test methods (ISO 13992:2014)
DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN ISO 8364:2018 Alpine skis and bindings - Binding mounting area - Requirements and test methods (ISO 8364:2017)
DIN EN 3030:1994-04 Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994
DIN EN 12706:1999 Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics; German version EN 12706:1999
DIN EN 196-3:2009 Methods of testing cement - Part 3: Determination of setting times and soundness(includes Amendment A1:2008); English version of DIN EN 196-3:2009-02
DIN ISO 9462:2023-06 Alpine ski-bindings - Requirements and test methods (ISO 9462:2023); Text in German and English / Note: Date of issue 2023-05-12*Intended as replacement for DIN ISO 9462 (2015-07).

AENOR

UNE 26391:1989 ROAD VEHICLES. COOLANTS AND ANTIFREEZES OF ENGINE. TEST METHOD FOR DETERMINATING THE FREEZING POINT OF AQUEOUS SOLUTIONS.
UNE-EN 14187-1:2017 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
UNE-EN 480-2:2007 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
UNE-EN 3030:1996 AEROSPACE SERIES. TEST METHOD FOR DRY FILM LUBRICANTS. SOLIDS CONTENT.

American National Standards Institute （ANSI)

ANSI/ASTM D176:2007 Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
ANSI/ASHRAE 218-2019 ANSI/ASHRAE Standard 218-2019 Method of Test for Lubricant and Refrigerant Miscibility Determination

IN-BIS

IS 11660-1986 Quantitative evaluation method of cationic fixatives

VN-TCVN

TCVN 2093-1993 Paints.Method for determination of solid content and binders content
TCVN 2316-1978 Reagents.Method for the determination of silicate
TCVN 2321-1978 Reagents.Methods for the determination of carbonates
TCVN 6017-1995 Cements.Test methods.Determination of setting time and soundness
TCVN 2318-1978 Reagents.Methods for the determination of nitrates
TCVN 2323-1978 Reagents.Methods for the determination of nitrites
TCVN 2315-1978 Reagents.Method for the determination of anions impurities
TCVN 6017-2015 Cements -Test methods - Determination of setting time and soundness

RU-GOST R

GOST 14870-1977 Reagents. Methods for determination of water
GOST 10671.1-2016 Reagents. Method for determination of silica impurity
GOST 10671.8-1974 Reagents. Method for the determination of carbonates
GOST 24245-2016 Reagents. Method for determination of ammonium impurity
GOST 10671.2-1974 Reagents. Methods for determination of nitrates
GOST 10671.6-1974 Reagents. Methods for determination of phosphates
GOST 16457-2016 Reagents. Methods for determination of aldehydes impurity
GOST 10671.1-1974 Reagents. Method for determination of silica impurity
GOST 10671.7-1974 Reagents. Methods for the determination of chlorides
GOST 10485-2016 Reagents. Methods for determination of arsenic impurity
GOST 17319-1976 Reagents. Methods for the determination of heavy metals
GOST 10671.4-2016 Reagents. Methods for determination of total nitrogen impurity
GOST 10671.3-1974 Reagents. Methods for determination of nitrites
GOST 10671.8-2016 Reagents. Methods for determination of carbonates impurity
GOST 10671.6-2016 Reagents. Methods for determination of phosphates impurity
GOST 10671.2-2016 Reagents. Methods for determination of nitrates impurity
GOST 10671.5-2016 Reagents. Methods for determination of sulfates impurity
GOST 10671.7-2016 Reagents. Methods for determination of chlorides impurity
GOST 10671.3-2016 Reagents. Methods for determination of nitrites impurity
GOST R 57892-2017 Spinal assistants and headholders. Technical requirements and test methods

CZ-CSN

CSN 66 8102 Cast.12-1978 Smokeless powders. Methods of teating. Determination of diphenylamine and centralite I in a single sample
CSN 68 1147-1994 Testing methods for surfactants and detergents. Determination of glycerol content. Titrimetric method
CSN 35 8234 Cast.11-1988 Fixed capacitors. Method of charge and discharge test
CSN 68 1157-1994 Testing methods for surfactans and detergents. Determination of chelating agent content
CSN 65 5719-1983 Pesticides. Testing methods. Determlnation of water by Dean and Stark method
CSN 68 1152-1994 Testing methods for surfactans and detergents. Surface active agents. Determination of free alkalinity or free acidity. itrimetric method
CSN 26 9308-1983 Plastic crates. Testing method of fixed handle strenght
CSN EN 196-3-1993 Meethods of testing cement; Determination of setting time and soundness
CSN 68 1150-1994 Testing methods for surfactans and detergents. Determination of the carbonates content
CSN 56 0160-7-2000 Methods for testing of sugar products. Determinatíon of reducing agents.
CSN 68 1143-1994 Testing methods for surfactans and detergents. Determination of anion-active tenside
CSN 68 1156-1994 Testing methods for surfactans and detergents. Washing powder. Determination of active oxygen content. Titrimetric ethod.

BE-NBN

NBN-EN 3030-1994 Aerospace series - Test method for dry film lubricants - Solids content
NBN B 12-207-1978 Cement test methods. Clotting time and stability determination

CU-NC

NC 29-15-1987 Pesticides. Determination of Emulsion Stability. Testing Method

ES-AENOR

UNE 104-281 Pt.5-7-1987 Asphalt and modified asphalt materials. Coatings and adhesives. experiment method. Fixed materials and volatile materials
UNE 104-281 Pt.5-6-1987 Asphalt and modified asphalt materials. Coatings and adhesives. experiment method. Robustness

American Society for Testing and Materials (ASTM)

ASTM C1635-06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM D3056-05 Standard Test Method for Gel Time of Solventless Varnishes
ASTM D6073-08a Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM D2510-94(2006) Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D3056-00 Standard Test Method for Gel Time of Solventless Varnishes
ASTM C1635-22 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM F2125-05 Standard Test Method for Treestand Static Stability
ASTM F2125-09 Standard Test Method for Treestand Static Stability and Adherence
ASTM D6073-08a(2013) Standard Test Method for Relative Setting of Heatset Printing Inks
ASTM D3056-14 Standard Test Method for Gel Time of Solventless Varnishes
ASTM D2510-94(2012) Standard Test Method for Adhesion of Solid Film Lubricants
ASTM E2149-01 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
ASTM D2649-99e1 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D2510-94(1998) Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D2510-22 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D2649-20 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D2649-20a Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM E1054-08(2013) Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents
ASTM D2510-94(2017) Standard Test Method for Adhesion of Solid Film Lubricants
ASTM F1264-16e1 Standard specifications and test methods for intramedullary fixation devices
ASTM F1264-03(2007) Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM F1264-00 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM C1635-16 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM E2149-10 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
ASTM F1264-03 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM F1264-03(2007)e2 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM C1635-14 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM F1264-16 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM D6073-08 Standard Test Method for Relative Setting of Heatset Printing Inks by the Heatset Tester
ASTM D1177-05 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D1364-02 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D6073-96(2001) Standard Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester
ASTM F1264-14 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM F1264-01 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM D1631-99(2004) Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
ASTM D1631-99 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
ASTM E1461-92 Standard Test Method for Thermal Diffusivity of Solids by the Flash Method
ASTM F1264-03(2012) Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM F1264-03(2007)e1 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM D2921-98(2017) Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
ASTM D1364-22 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D1364-02(2007) Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D5984-97(2002)e1 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
ASTM D5984-11(2017) Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
ASTM D2649-04 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D2508-93 Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
ASTM D1177-12 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D2649-04(2009) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D2649-04(2014) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
ASTM D6761-02 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM E1461-01 Standard Test Method for Thermal Diffusivity of Solids by the Flash Method
ASTM D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
ASTM D1364-95(1999) Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D70-18 Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM C156-09 Standard Test Method for Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
ASTM F1541-02(2015) Standard Specification and Test Methods for External Skeletal Fixation Devices
ASTM F1541-02(2011)e1 Standard Specification and Test Methods for External Skeletal Fixation Devices
ASTM D1364-02(2012) Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

US-FCR

FCR FED WSAC 1-1971 WATER-REDUCING, SET-CONTROLLING ADMIXTURES FOR CONCRETE, SPECIFICATIONS AND METHOD OF TEST FOR

Society of Automotive Engineers (SAE)

SAE AS5385C-2007 (R) Cargo Restraint Straps - Design Criteria and Testing Methods

GOSTR

GOST 17319-2019 Reagents. Methods for determination of heavy metals
GOST R 58378-2019 Alpine ski-bindings. Safety requirements and test methods

Lithuanian Standards Office

LST EN 480-2-2007 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
LST EN 3030-2001 Aerospace series - Test method for dry film lubricants - Solids content

International Organization for Standardization (ISO)

ISO 9462:2023 Alpine ski-bindings — Requirements and test methods
ISO 9462:2006 Alpine ski-bindings - Requirements and test methods
ISO 9462:2014 Alpine ski-bindings - Requirements and test methods
ISO 8312:1999 Rubber compounding ingredients - Stearic acid - Definition and test methods
ISO 24070-1:2021 Building and civil engineering sealants — Determination of cured thickness of one-component sealant — Part 1: Taper-shaped groove test method
ISO 8312:2015 Rubber compounding ingredients - Stearic acid - Definition and test methods
ISO 24070-2:2021 Building and civil engineering sealants - Determination of cured thickness of one-component sealant - Part 2: Cylindrical cup test method

Japanese Industrial Standards Committee (JISC)

JIS K 1571:1998 Qualitative standards and testing methods of wood preservatives

PL-PKN

PN C04804-19-1986 Agents for laundering and washing General methods for testing soaps Determination soaking number
PN N97023-1991 Alpine ski-bindings. Safety requirements and test methods

ZA-SANS

SANS 50196-3:2006 Methods of testing cement Part 3: Determination of setting times and soundness

Standard Association of Australia （SAA）

AS 1289.6.6.1:2020 Methods of testing soils for engineering purposes, Method 6.6.1: Soil strength and consolidation tests — Determination of the one-dimensional consolidation properties of a soil — Standard method
AS ISO 13007.4:2013 Test methods for tile grouts and adhesive grouts

DIN

DIN ISO 11087:1997 Alpine ski-bindings - Retention devices - Safety requirements and test methods (ISO 11087:1997)
DIN ISO 8364:2000 Alpine skis and bindings - Binding mounting area - Requirements and test methods (ISO 8364:1999)

GOST

GOST R 56445-2021 Stationary training equipment. General safety requirements and test methods

European Committee for Standardization (CEN)

PD CEN/TS 16811-3:2015 Winter maintenance equipment - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods

Canadian General Standards Board （CGSB)

CGSB 2.11-94 30.1-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Determination of the Type of Synthetic Detergent (Qualitative Test)

GM Daewoo

GMKOREA EDS-T-7747-2011 The Test Method for Determining the Resistance to Solvents of Organic Finishes

ES-UNE

UNE-EN ISO 9455-3:2020 Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)

SE-SIS

SIS SS 13 42 31-1989 Methods of testing cement — Determination of setting time and soundness

Malaysia Standards

MS 1453-1999 Methods of analysis for liquid ironbased coagulants

Others: Reagent Phase Immobilization Method