size measurement

size measurement, Total:210 items.

The international standard classification for "size measurement" includes: Fishing and fish breeding , Tyres in general , aircraft tyres , Linear and angular measurements , Wires , Electrical wires and cables in general , Furniture , Other non-ferrous metals and their alloys , Road vehicles in general , Chemical analysis of metals , Other methods of testing of metals , Transmissions, suspensions , Test conditions and procedures in general , Measuring instruments , Metallic coatings , Aids for disabled or handicapped persons , Jewellery , Protection against crime .

The Chinese standard classification for "size measurement" includes: Aquatic product and fishery in general , Tools for aquatic product and fishery , Tyre , Forging and pressing , Bare wire , Wire with insulation layer , Furniture in general , Precious metals and their alloys , Vehicle body (cab) and accessories , Metal physical property test method , Steering and operation systems , Basic standards and general methods , Basic standards and general methods , Basic standards and general methods , Material Protection , Bicycle , Crime judging technology .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 6964-1986 Fishing nets; Method of measure for mesh size
GB 6965-1986 Pretension for mesh size measurement
GB/T 8806-1988 Method for dimension measuring of plastic pipes
GB/T 521-2023 Test methods for measuring peripheral dimensions of tyres
GB/T 5076-1985 Measurement of the dimensions of a cylindrical component having two axial terminations
GB/T 34874.1-2025 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 1: Vocabulary
GB/T 4074.2-2008 Winding wires - Test methods - Part 2: Determination of dimensions
GB/T 38980-2020 Test method for artificial defect sizes of zirconium tube flaw detection comparison samples
GB/T 17346-2023 Test methods of automobile pedal position dimensions
GB/T 11193-1998 Method of mesuring pneumatic aircraft tyre peripheral dimensions
GB/T 6964-1986 Fishing nets--Method of measure for mesh size
GB/T 521-2003 Test method of measuring peripheral dimensions for tyres
GB/T 34358-2017 Dimension measurement of hot free forgings and rolled rings
GB/T 6965-1986 Pre-tension for determination of the mesh size
GB/T 15077-2008 Geometric size measuring methods of precious metals and their alloy materials
GB/T 34874.4-2025 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 4: Evaluation of uncertainty in measurement
GB/T 33714-2017 Nanotechnology―Test method for size of nanoparticles―Atomic force microscopy
GB/T 12673-2019 Motor vehicle main dimensions measurement method
GB/T 38733-2020 Office furniture—Office chairs—Methods for the determination of dimensions
GB/T 11559-1989 Motor vehicles--Use in defining their seating accommodations--Three dimensional H point machine
GB/T 12673-1990 Motor vehicles－Basic dimensions－Measuring method
GB/T 11888-2021 Jewellery—Ring-size—Definition, measurement and designation
GB/T 4909.2-1985 Test methods for bare wires--Measurement of dimensions
GB/T 4074.2-1999 Test methods for winding wires-Part 2:Determination of dimensions
GB/T 521-2012 Test method of measuring peripheral dimensions for tyres
GB/T 11378-1989 Metallic coatings-Measurement of coating thickness-profilometric method
GB/T 18029.7-2009 GB/T 18029.7-2009
GB/T 15077-1994 Geometric size measuring methods of precious metals and their alloy materials
GB/T 6964-2010 Determination of mesh size of fishing nets
GB/T 4909.2-2009 Test methods for bare wires - Part 2: Measurement of dimensions

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1825-2016 Regulations on tolerances for jewelry size measurement

Professional Standard - Aquaculture

SC/T 5016.1-1988 Fishing nets.The method for measuring the netting

Professional Standard - Public Safety Standards

GA/T 1024-2013 Measurement methods for target size in video image

Professional Standard - Automobile

QC/T 577-1999 Measurement method for interior dimensions of passenger compartment

Professional Standard - Machinery

JB 4100-1985 Measurement methods for passenger compartment dimensions of passenger cars

Military Standard of the People's Republic of China-General Armament Department

GJB 8624-2015 Large-scale measurement system - laser tracker calibration specifications
GJB 222-1986 Method for measuring the dimensions of the inflated outer rim of aviation tires

Group Standards of the People's Republic of China

T/CFA 0106011-2021 Photogrammetry of casting dimensions
T/CSTM 00619-2022 Dimension measurement of the fiber preform——Three dimensional laser scanning method
T/CSTM 00269-2020 Computed tomography in dimensional measurement Of selective laser melting manufactured structures

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 6201-2008 Calibration Specification for the Large Scale Coordinate Measurement System-Laser Tracker

Professional Standard - Ferrous Metallurgy

YB/T 145-1998 Steel tubes-Measurement method of sizes of standard artificial defect for flaw detection
YB/T 145-2013 Die Casting and Size Measurement Method of Artificial Defects on the Reference Sample Pipes

Fujian Provincial Standard of the People's Republic of China

DB35/T 1485-2014 General Technical Requirements for Measuring Instruments for Automobile Dimensions

Professional Standard - Agriculture

ZB B 56003-1988 Fishing net mesh size measurement method

Professional Standard - Forestry

LY/T 1404-1999 Laminated wood plastics - Compreg - Measurement of test specimens

Anhui Provincial Standard of the People's Republic of China

DB34/T 2382-2015 General technical requirements for measuring instruments for automobile external dimensions

Swiss Association for Standardization (SNV)

SEV 4004-1960 Gauge block size measurement

Magyar Szabványügyi Testület

MSZ KGST 304-1976 Taper size measurement
MSZ KGST 639-1977 Trapezoidal surface size measurement
MSZ 9781/2-1987 Sprinkler equipment. Dimensions
MSZ 3355/2-1983 Footwear Industry Size Measurement Standards
MSZ 204-1978 General dimensional measurements and boundary measurements
MNOSZ 2795-1956 Auger geometry measurement
MSZ 3370/1-1979 General standard leg size measurements
MNOSZ 22314-1956 Dimensional measuring tools for the mechanical industry. Micrometer
MSZ 9818/2-1982 Braided hat and scarf size measurements

American National Standards Institute （ANSI)

ANSI/ASME B89.7.2-1999 Dimensional Measurement Planning
ANSI/ASME B89.7.2-2014 Dimensional Measurement Planning
ANSI/TIA/EIA 455-123-2000 Measurement of Optical Fiber Ribbon Dimensions
ANSI/TIA-455-123-2000(2013) FOTP-123 Measurement of Optical Fiber Ribbon Dimension
ANSI B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens

American Society of Mechanical Engineers (ASME)

ASME B89.7.2-1999 Dimensional Measurement Planning
ASME B89.7.2-2014 Dimensional Measurement Planning
ASME B89.7.2-2014(R2024) Dimensional Measurement Planning
ASME B89.7.2-2014(R2019) Dimensional Measurement Planning
ASME B89.6.2-1973(R2017) Temperature and Humidity Environment for Dimensional Measurement
ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement

Spanish Association for Standardization (UNE)

UNE 56512:1985 MEASUREMENT OF ROUGH TIMBER DIMENSIONS
UNE 18150:1987 ERRATUM METHOD OF DIMENSION MEASURES AND ROTATION PRECISION.
UNE 18150:1986 METHOD OF DIMENSION MEASURES AND ROTATION PRECISION.
UNE 41167:1989 EX CONCRETE BLOCKS. DIMENSIONS MEASURE AND SHAPE CHECKING
UNE 56-512-1985 Measurement of log dimensions
UNE 56-527-1972 Measurement of wood dimensions
UNE 67-043-1988 Dimensional measurements of large ceramic blocks made of cooked clay
UNE 57163-4:1992 PAPER AND BOARD CORES. PART 4: DIMENSIONAL MEASUREMENTS.
UNE 67030:1986 ERRATUM BURNED CLAY BRICKS. DIMENSIONS MEASURE AND SHAPE CHECKING
UNE 67-030-1986 Dimensional measurement and shape determination of cooked clay bricks
UNE 67030:1985 BURNED CLAY BRICKS. DIMENSIONS MEASURE AND SHAPE CHECKING
UNE 67-030-1985 Dimensional measurement and shape determination of cooked clay bricks

Korean Agency for Technology and Standards (KATS)

KS M ISO 3126:2016 Plastics piping system－Plastics piping components－Measurement and determination of dimensions
KS M ISO 3126:2003 Plastics piping system-Plastics piping components-Measurement and determination of dimensions
KS L 3111-1962 Measuring method for dimension of fire brick
KS L 3111-1995 Measuring method for dimension of fire brick
KS X ISO/IEC TR 14143-3-2020 Information technology — Software measurement — Functional size measurement — Part 3: Verification of functional size measurement methods
KS X ISO/IEC TR 14143-3:2005 Information technology-Software measurement — Functional size measurement-Part 3: Verification of functional size measurement methods
KS X ISO/IEC TR 14143-5:2005 Information technology-Software measurement-Functional size measurement-Part 5:Determination of functional domains for use with functional size measurement
KS X ISO/IEC TR 14143-3-2005(2020) Information technology — Software measurement — Functional size measurement — Part 3: Verification of functional size measurement methods
KS F ISO 737-2013 Coniferous sawn timber－Sizes－Methods of measurement
KS F ISO 8904-2004(2009) Broadleaved sawn timber－Sizes－Methods of measurement
KS F ISO 737-2004(2009) Coniferous sawn timber－Sizes－Methods of measurement
KS R 0018-2014 Measuring method of automobile exterior dimensions
KS R 0018-2019 Measuring method of automobile exterior dimensions
KS R 0018-1971 Measuring method of automobile exterior dimensions
KS F ISO 8904-2013 Broadleaved sawn timber－Sizes－Methods of measurement
KS F 2163-2021 Measurement of sizes and determination of volume for saw logs
KS X ISO/IEC TR 14143-5-2005(2020) Information technology － Software measurement － Functional size measurement － Part 5: Determination of functional domains for use with functional size measurement
KS F ISO 8904:2004 Broadleaved sawn timber-Sizes-Methods of measurement
KS F ISO 737:2013 Coniferous sawn timber－Sizes－Methods of measurement
KS F ISO 737:2004 Coniferous sawn timber-Sizes-Methods of measurement
KS F ISO 8904:2013 Broadleaved sawn timber－Sizes－Methods of measurement
KS T 1335-2012 Standard test method for determining interior dimensions of fiberboard boxes(Box gage method)
KS X ISO/IEC 14143-2-2007(2022) Information technology － Software measurement － Functional size measurement － Part 2: Conformity evaluation of software size measurement methods to KS X 2222 － 1: 2001
KS X ISO/IEC 14143-2-2007(2017) Information technology－Software measurement－Functional size measurement－Part 2：Conformity evaluation of software size measurement methods to KS X 2222－1：2001
KS X ISO/IEC 14143-2-2022 Information technology － Software measurement － Functional size measurement － Part 2: Conformity evaluation of software size measurement methods to KS X 2222 － 1: 2001
KS F 2280-1986 GENERAL RULES OF MEASURING METHOD FOR DIMENSION OF EQUIPMENT UNITS FOR DWELLINGS
KS F 2280-2001 GENERAL RULES OF MEASURING METHOD FOR DIMENSION OF EQUIPMENT UNITS FOR DWELLINGS
KS F 2280-1981(1996) GENERAL RULES OF MEASURING METHOD FOR DIMENSION OF EQUIPMENT UNITS FOR DWELLINGS
KS F ISO 9424-2008 Wood-based panels－Determination of dimensions of test pieces

Gosstandart of Russia

GOST 29325-1992 Plastics pipes. Measurement of dimensions

Yugoslav Association for Standardization

JUS G.S3.502-1979 Plastics pipes - Measurement of dimensions
JUS D.A8.071-1985 Testing ofplywood. Measurement ofdimensions ofpanels
JUS D.C8.102-1983 Testing ofparticle boards. Dimensions measuring of testpieces

South African Bureau of Standard

SANS 3126:1974 Plastics pipes - Measurement of dimensions

British Standards Institution (BSI)

BS PD ISO/IEC TR 14143-3:2003 Information technology. Software measurement. Functional size measurement-Verification of functional size measurement methods
PD ISO/IEC TR 14143-3:2003 Information technology. Software measurement. Functional size measurement. Verification of functional size measurement methods
PD ISO/IEC TR 14143-5:2004 Information technology. Software measurement. Functional size measurement. Determination of functional domains for use with functional size measurement
BS 5173-1:1976 Methods of test for hoses-Measurement of dimensions
BS ISO 11093-4:2022 Paper and board. Testing of cores - Measurement of dimensions
BS ISO/IEC 14143-2:2002 Information technology. Software measurement. Functional size measurement-Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
BS 6486:1984 Method for measurement of turning dimensions of wheeled earthmoving machinery

International Organization for Standardization (ISO)

ISO 3126:1974 Plastics pipes; Measurement of dimensions
ISO/IEC TR 14143-3:2003 Information technology - Software measurement; Functional size measurement - Part 3: Verification of functional size measurement methods
ISO 737:1975 Coniferous sawn timber; Sizes; Methods of measurement
ISO 8904:1990 Broadleaved sawn timber; sizes; methods of measurement
ISO/IEC TR 14143-5:2004 Information technology — Software measurement — Functional size measurement — Part 5: Determination of functional domains for use with functional size measurement

Czech Standards Institute (UNMZ)

CSN 25 6162-1975 Contact-less ganges or measuring hn size of area
CSN 64 5402-1973 Cellular materials. easurement of dimensions
CSN 34 7010 Cast.02-1973 Overall dimension measurement of cables and flexible cords
CSN 74 6488-1984 Wooden door. Method of measuring dimensions and de- viations from squareness.
CSN 74 6488 Cast.1-1987 Wooden doors. Method of door leaf rebate dimensions measuring
CSN ISO 7457:1992 Earth-moving machinery. Measurement of turning dimenions of wheeled machines
CSN 91 7821-1977 Dimension measuring of rubber and plastic floor coverings

Standard Association of Australia （SAA）

AS L10:1958 Size measurements for girls' ready-to-wear dresses
AS L53:1970 Size measurements for boys' school shirts

American Society for Testing and Materials (ASTM)

ASTM STP 848-1984 Droplet size measurement technology
ASTM STP 108-1951 Droplet size measurement technology
ASTM STP 1083-1990 Droplet size measurement technology
ASTM STP 234-1959 Particle Sizing Seminar
ASTM D3767-96 Standard Practice for Rubber-Measurement of Dimensions
ASTM D3767-03 Standard Practice for Rubber-Measurement of Dimensions
ASTM F72-95(2001) Standard Specification for Gold Wire for Semiconductor Lead Bonding
ASTM F728-81(1997)e1 Standard Practice for Preparing An Optical Microscope for Dimensional Measurements
ASTM D3767-03(2020) Standard Practice for Rubber—Measurement of Dimensions

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0472-214-1987*DIN VDE 0472-214:1987 Testing of cables, wires and flexible cords; dimensions of single-mode fibres

Danish Standards Foundation

DS 1114-1:1989 Corrugated sheets for roofing. Measurement of dimensions
DS 2125:1989 Plastics pipes. Measurement of dimensions. Visual inspection of surfaces

Portuguese Institute of Quality

NP EN 325-2002 Wood-based panels Determination of dimensions of test pieces

(U.S.) Telecommunications Industries Association

TIA/EIA-455-123-2000 FTOP-123 Measurement of Optical Fiber Ribbon Dimensions

GCC Standardization Organization

GSO ISO 737:2013 Coniferous sawn timber -- Sizes -- Methods of measurement
GSO ISO/IEC TR 14143-3:2017 Information technology -- Software measurement -- Functional size measurement -- Part 3: Verification of functional size measurement methods
GSO ISO 8904:2016 Broadleaved sawn timber -- Sizes -- Methods of measurement
GSO ISO/IEC 14143-2:2021 Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
GSO ISO 11093-4:2008 Paper and board -- Testing of cores -- Part 4: Measurement of dimensions

Association Francaise de Normalisation

NF B56-012:1980 Fibragglo panels - Measuring the dimensions and squareness of the panels
NF E10-103:1988 Dimensional measuring. Part 4 : circularity deviation.
NF E10-102:1988 Dimensional measuring. Part 3 : flatness deviation.
NF E10-107:1993 Dimensional measuring. Part 8 : perpendicularity deviation.
NF E10-101:1988 Dimensional measuring. Part 2 : staightness deviation.
NF E10-108:2000 Dimensional measuring methods - Part 9 : positioning deviation.
NF ISO 11093-4:2022 Papier et carton - Essais des mandrins - Partie 4 : mesurage des dimensions
NF E10-104:1989 Dimensional measuring methods. Part 5 : cylindrical deviation.

Association of German Mechanical Engineers

VDI/VDE 2630 BLATT 1.4-2010 Computed tomography in dimensional measurement technology — comparison of different dimensional measurement methods
VDI/VDE 2630 Blatt 1.4-2008 Computed tomography in dimensional measurement - Measurements procedure and comoarability
VDI/VDE 2630 Blatt 1.2-2010 Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements
VDI/VDE 2630 BLATT 1.2-2018 Computed tomography in dimensional measurement technology — factors influencing the measurement result and recommendations for dimensional computed tomography measurements
VDI/VDE 2630 Blatt 1.2-2008 Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements
VDI/VDE 2630 BLATT 1.2-2016 Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements

Japanese Industrial Standards Committee (JISC)

JIS D 0302:1967(1996) Measuring Method of Automobile Exterior Dimensions
JIS R 2202:1975 Methods of measuring dimensions of refractory bricks
JIS X 0135-3:2011 Information technology -- Software measurement -- Functional size measurement -- Part 3: Determination of functional domains for use with functional size measurement and performance verification of functional size measurement methods
JIS A 8303:1987 Measurement of turning dimensions of wheeled construction machinery

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 2055-1977 Seamless hot-rolled steel tubes.Sizes,measurements
TCVN 2056-1977 Seamless cold-drawn and hot-rolled steel tubes.Sizes,measurements

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 737:2016 Coniferous sawn timber -- Sizes -- Methods of measurement
BH GSO ISO/IEC 14143-2:2022 Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
BH GSO ISO 13059:2017 Round timber -- Requirements for the measurement of dimensions and methods for the determination of volume

Indonesia Standards

SNI 7537.2-2010 Saw timber. Part 2: Dimensional measurements
SNI 7537.2:2010 Kayu gergajian - bagian 2: Pengukuran dimensi

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO/IEC TR 14143-3:2017 Information technology -- Software measurement -- Functional size measurement -- Part 3: Verification of functional size measurement methods
OS GSO ISO 8904:2016 Broadleaved sawn timber -- Sizes -- Methods of measurement
OS GSO ISO 13059:2015 Round timber -- Requirements for the measurement of dimensions and methods for the determination of volume

Ente Nazionale Italiano di Unificazione

UNI ISO 737:1984 Coniferous sawn timber. Sizes. Methods of measurement.
UNI 2651-1944 Men's clothing cutting sizes. Measurement standards and rules
UNI 10699-5:1998 Inspection procedures for dimensional measuring equipments - Guideline for micrometer callipers.
UNI EN 1309-1:1999 Round and sawn timber - Method of measurement of dimensions - Sawn timber
UNI 10699:2024 Inspection procedures of dimensional measuring equipment - General guidelines
UNI 10699-19:1998 Inspection procedures for dimensional measuring equipments - Guidelines for knife straight edge.
UNI 10699-2:1999 Inspection procedures for dimensional measuring equipments - Guideline for plug gauges.
UNI 5064 P-1962 Wood fiber panel testing. Sample size measurement

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.2.6-1997 Hole Size Measurement, Drilled Revision A
IPC TM-650 2.2.7-1986 Hole Size Measurement, Plated; Revision A - May 1986

Swedish Institute for Standards

SIS SS 84 46 17-1981 Plastic film sacks - Designations and measurement of dimensions
SIS SS 988-1988 Indexable hardmetal inserts - Measuring of the dimension m
SIS SS 988-1981 Indexable hardmetal inserts — Measuring of the dimension m
SIS SMS 988-1965 Carbide tools. Indexable inserts. Measuring of the dimension m
SIS SS-ISO 7457:1986 Earth moving machinery - Measurement of turning dimensions of wheeled machines

Argentine Institute of Standardization

IRAM 12501-1948 Dimensional measurement of commonly used diamond-shaped refractory bricks

Standards Norway

NS 2950:1976 Plastic pipes — Visual inspection and measurement of dimensions
NS-INSTA 212:1988 Plastics pipes — Measurement of dimensions and visual inspection of surfaces

Belgian Standards Institute

NBN T 46-006-1983 Cellular plastics and rubbers - Determination of linear dimensions
NBN B 25-202-1977 Dimensional measurement of doors and door leaves and angle defect measurement

Standards Institution of Israel

S.I.452-1968 SIZE MEASUREMENTS FOR COTTON KNIT UNDERWEAR: VESTS AND PANTS

German Institute for Standardization

DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012
DIN ISO 11093-4 E:2016-12 Paper and board - Testing of cores - Part 4: Measurement of dimensions

Austrian Standards

ONORM ISO 7457:1985 Barth moving machinery; measurement of turning dimensions of wheeled machines

Military Standards (MIL-STD)

MIL MIL-G-0036683A-1973 GAGE, FRUIT AND VEGETABLE SIZING (S/S BY A-A-54720)

Society of Automotive Engineers (SAE)

SAE AIR4906-2013 Droplet Sizing Instrumentation Used in Icing Facilities

Others: Size measurement iso,Particle Size Measurement,Dimensional error measurement,Measuring Particle Size,size measurement,size measurement,large size measurement,Dimensional Measuring Instruments,Linear dimension measurement,Dimension measurement center,Dimension measuring microscope,Dimensional measurement system,measure size,Linear dimension measurement,measure size sop,Geometry measurement,Dimension measurement environment,size measure size