How many degrees of plasticizer

How many degrees of plasticizer, Total:262 items.

The international standard classification for "How many degrees of plasticizer" includes: Solvents , Products of the chemical industry , Surface active agents , Thermoplastic materials , Plastics in general , Leather and furs , Plastics pipes , Chemical reagents , Other products of the chemical industry , Adhesives , Animal feeding stuffs .

The Chinese standard classification for "How many degrees of plasticizer" includes: Basic standards and general methods for chemical additive , Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Furs and leathers , Plastic profile , Chemical reagent in general , Basic standards and general methods for catalyst , Basic standards and general methods for adhesives , Livestock and poultry feed and additive .

Group Standards of the People's Republic of China

T/CPPC 1074-2023 Grease plasticizer
T/CQJX 3-2022 Standards for the Prevention and Control of Plasticizer Pollution in Alcohol

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1660-2008 Determinating the kincmatic viscosity of plasticizers
GB/T 22931-2008 Leather and fur—Chemical tests—Determination of plasticizers
GB/T 1660-1982 Measuring method for kinematic viscosity of plasticizers(Pinkevitch method)
GB 1666-1988 Plasticizers--Determination of density
GB/T 11547-2008 Plastic - Methods of test for the determination of the effects of immersion in liquid chemicals
GB/T 5470-2008 Plastics - Determination of the brittleness temperature by impact
GB/T 1665-1995 Plasticizers--Determination of saponification value and ester-content
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 1664-1995 Plasticizers - Determination of colour
GB/T 9736-2008 Chemical reagent - General method for the determination of acidity and alkalinity
GB/T 1668-2008 Plasticizers - Determination of acid value and acidity
GB/T 9736-1988 Chemical reagent-General method for the determination of acidity and alkalinity
GB/T 1633-2000 Plastics--Thermoplastic materials--Determination of Vicat sofening temperature (VST)
GB/T 8802-2001 Thermoplastics pipes and fitting - Determination of vicat softening temperature
GB/T 1668-1995 Plasticizers--Determination of acid value and acidity
GB/T 1665-2008 Plasticizers - Determination of saponification value and ester-content
GB/T 1661-1982 Measuring method for kinematic viscosity of plasticizers(Engler method)

工业和信息化部

HG/T 5781-2021 Rubber plasticizer-High viscosity mineral oil

Taiwan Provincial Standard of the People's Republic of China

CNS 14493-2000 Solvent cements for chlorinated poly(vinyl chloride)(CPVC)plastic pipe and fittings
CNS 4393-1978 Method of Test for Vicat Softening Temperature of Thermoplastics
CNS 5138-1980 Method of Measurement for Softening Temperature of Adhesives
CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics

Professional Standard - Chemical Industry

HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts

国家能源局

SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalysts
SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal
GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33799-2017 Determination of the bond strength of adhesive in engineering-plastic joints

Professional Standard - Agriculture

GB 9736-1988 General method for the determination of acidity and alkalinity of chemical reagents
GB 3635-1983 Determination of granular crush-strength for fertilizer catalyst, molecular sieve and absorbent

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3540-2021 Determination of Chloride in Chemical Reagents by Turbidimetric Method

CZ-CSN

CSN 20 0300 Cast.27-1986 Measurements of geometrical accuracy ofmachine tools.Methods of measurement of variation of
CSN 21 0314-1975 Forming machines. Geometrical precision of hydraulic thermosetting presses
CSN 73 0205-1995 Geometric Accuracy in Architectural Design Geometric Accuracy
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN 64 0243-1983 Determination of the loss f plasticizers by the ctivated carbon method
CSN 21 0305-1970 Geometrie precision of horizontál
CSN 21 0311-1981 Forming machines. Table shears. Geometrical precision
CSN 21 0309-1981 Forming machines. Press brakes. Geometrical precision
CSN 21 0303-1985 Forming machines. Screw presses. Geometrical precision
CSN 21 0306-1984 Eccentric presses.Geometrie precision

German Institute for Standardization

DIN 53400:1988-06 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN 53400:1970 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN 53400:1988 Testing of plasticizers; determination of physical and chemical characteristics of plasticizers
DIN EN ISO 306 E:2012-01 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN ISO 306 E:2021-11 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN ISO 7327:1997 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997
DIN 53774-2:1986 Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; preparation of specimens
DIN 53774-2:1977 Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; preparation of specimens
DIN EN ISO 4597-1:2010-01 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation (ISO 4597-1:2005); German version EN ISO 4597-1:2008
DIN EN 665:1995 Resilient floor coverings - Determination of exudation of plasticizers; German version EN 665:1994
DIN 53408:1967-06 Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers
DIN EN 1238:1999 Adhesives — Determination of the softening point of thermoplastic adhesives (ring and ball)
DIN EN 1238:2011-07 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version EN 1238:2011
DIN 53771:1984 Testing of colouring materials in plastics; determination of the resistance of colouring materials to sulphur dioxide
DIN 53771:1976 Testing of colouring materials in plastics; determination of the resistance of colouring materials to sulphur dioxide
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics

RO-ASRO

STAS 12128-1982 PLASTICIZERS FOR PLASTICS Acidity determination
STAS 12155-1982 PLASTICIZERS FOR PLASTICS Ester content and saponification value determination
STAS 6339-1980 PLASTICS Determination of resistance at chemical agents action
STAS 8625-1990 Mixed plastifying additive for concretes
STAS 9594-1974 PLASTICS Determination of stiffness in torsion as a function of temperature
STAS 738-1960 Geometric dimensions. Unit of measure
STAS 7863-1967 Plasticizer
STAS 6321-1968 plastic. Determination of viscosity properties in polyvinyl chloride solvents

SCC

HOLDEN HN 1089-2001 Sealer - Plastisol High Viscosity
BS 5075-3:1985 Concrete admixtures-Specification for superplasticizing admixtures
BS EN ISO 4597-1:1998 Plastics. Hardeners and accelerators for epoxide resins-Designation
HOLDEN HN 2315-1998 Adhesive - Structural - Fast Cure - Plastics
HOLDEN HN 2315-2013 Adhesive - Structural - Fast Cure - Plastics
AENOR UNE 53045:1970 Plastic materials. Determination of the acidity index of plasticizers used in the plastics industry.
NS 2956:1972 Thermoplastics — Determination of the Vicat softening temperature
BS EN 1238:1999 Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
BS ISO 2781:2008 Rubber, vulcanized or thermoplastic. Determination of density
HOLDEN HN 1736-2012 Sealer - Plasticol - Under Body - Non-Staining
DANSK DS/EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation
AENOR UNE 53047:1970 Plastic materials. Determination of the transparency index of plasticizers, by the yado index.
BS ISO 7619-1:2004+A1:2008 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-Durometer method (Shore hardness)
BS ISO 7619-1:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
NS-EN 1238:2011 Adhesives — Determination of the softening point of thermoplastic adhesives (ring and ball)
DANSK DS/EN 1238:2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
DIN EN 1238 E:2010 Draft Document - Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version FprEN 1238:2010
NS-EN 1238:1999 Adhesives — Determination of the softening point of thermoplastic adhesives (ring and ball)
DANSK DS/ISO/TS 23301:2024 STEP geometry visualization services
BS EN ISO 306:2004 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
AENOR UNE 53120:2016 Plastics. Determination of impact brittle temperature.
DANSK DS/EN ISO 306:2013 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS EN ISO 306:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS PD ISO/TS 23301:2021 STEP geometry visualization services
BS PD ISO/TS 23301:2023 STEP geometry visualization services
DANSK DS/ISO 306:2022 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS ISO 27588:2008 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
10/30231820 DC BS EN 1238. Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
CSA A266.5-M1981-1981 Guidelines for the Use of Superplasticizing Admixtures in Concrete
SN-CEN/TS 14999:2006 Adhesives for thermoplastic piping systems — Accelerated ageing test of adhesives
AWWA WQTC60700 Evaluation of Several Field Test Kits for Determining Concentrations of Arsenic in Drinking Water
BS ISO 48:2007 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 7619-2:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-IRHD pocket meter method
DANSK DS/EN ISO 7327:1997 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride

General Motors Corporation (GM)

GM 9984818-2002 Stand Alone Adhesion Promoter for TPO Revision A
GM 9984810-1998 Primer (Adhesion Promoter) - Solventborne for TPO Revision D [Replaced: GMNA 9984084]
GM 9984808-1998 Primer (Adhesion Promoter) - Waterborne for TPO Revision B
GM 9984262-1993 Primer (Adhesion Promoter) - Nonconductive, Interiors, for Olefinic Plastics

RU-GOST R

GOST 5346-1978 Plastic lubricants. Methods for determination of penetration with the conical penetrometer
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST R ISO 306-2012 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
GOST R 50407-1992 Liquid resins and plasticizers. Method for determination of colourity
GOST R 50096-1992 Plastics. Hardeners and accelerators for epoxide resins. Part 1. Designation
GOST R 50096-2015 Plastics. Hardeners and accelerators for epoxy resins. Part 1. Designation
GOST 18329-2014 Liquid resins and plasticizers. Methods for determination of density
GOST 18329-1973 Liqwid resins and plasticizers. Methods for determination of density
GOST 11279.3-1983 Organic dyes. Testing method of colour fastness to adhesives and plastificators

American National Standards Institute （ANSI)

ANSI/ASTM D543:2001 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ANSI/ASTM F493:2010 Specification For Solvent Cements For Chlorinated Poly Vinyl Chloride Cpvc Plastic Pipe And Fittings

YU-JUS

JUS G.C1.814-1991 Plastics. Hardeners and accelerators for epoxide resins. Designation
JUS G.S2.641-1991 Pastics.Thermoplastic materials.Determination of Vicat softening temperature
JUS G.C0.013-1991 Plastics - Symbols - Plasticizers

European Committee for Standardization (CEN)

EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN 1238:1999 Adhesives - Determination of the Softening Point of Thermoplastic Adhesives (Ring and Ball)
EN 1238:2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
EN 665:1994 Resilient floor coverings - Determination of exudation of plasticizers
EN ISO 4597-1:1997 Plastics - Hardeners and Accelerators for Epoxide Resins - Part 1: Designation ISO 4597-1: 1983
EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation (ISO 4597-1:2005)
EN ISO 7327:1997 Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride

International Organization for Standardization (ISO)

ISO 306:1987 Plastics; Thermoplastic materials; Determination of Vicat softening temperature
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 2007:1991 Rubber, unvulcanized; determination of plasticity; rapid-plastimeter method
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 2007:2018 Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method
ISO 2007:2007 Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method
ISO 4597-1:2005 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation
ISO/TS 23301:2021 STEP geometry visualization services
ISO/DTS 23301:2023 STEP geometry visualization services
ISO 4597-1:1983 Plastics; Hardeners and accelerators for epoxide resins; Part 1 : Designation
ISO 974:1980 Plastics; Determination of the brittleness temperature by impact
ISO/TS 23301:2023 STEP geometry visualization services
ISO 974:2000 Plastics - Determination of the brittleness temperature by impact
ISO 2007:1981 Rubber, unvulcanized; Determination of plasticity; Rapid plastimeter method
ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
ISO 306:2013 Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)
ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 7327:1994 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride

CEN - European Committee for Standardization

EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PREN 14728-2017 Geometric imperfections in thermoplastic welds - Classification

Korean Agency for Technology and Standards (KATS)

KS M ISO 306:2012 Plastics-Thermoplastic materials-Determination of Vicat softening temperature(VST)
KS M ISO 306:2015 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 16869-2014(2019) Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
KS M 1071-10-2018 Guide for determination of the viscosity of liquids of chemical substances
KS M ISO 4597-1:2014 Plastics — Hardners and accelerators for epoxy resins — Part 1: Designation
KS M ISO 4597-1-2019 Plastics — Hardners and accelerators for epoxy resins — Part 1: Designation
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 4597-1-2014(2019) Plastics — Hardners and accelerators for epoxy resins — Part 1: Designation
KS M ISO 974:2002 Plastics－Determination of the brittleness temperature by impact
KS M ISO 2007:2007 Rubber, unvulcanized－Determination of plasticity－Rapid-plastimeter method
KS M ISO 306-2020 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 1043-2:2013 Plastics — Symbols and abbreviated terms-Part 2: Fillers and reinforcing materials
KS M ISO 1043-2:2003 Plastics-Symbols and abbreviated terms-Part 2 : Fillers and reinforcing materials
KS M ISO 15509:2010 Adhesives－Determination of the bond strength of engineering-plastic joints
KS M 1071-2-2017(2022) Determination of boiling temperature for chemical agents
KS M ISO 974-2002(2017) Plastics－Determination of the brittleness temperature by impact
KS M ISO 2781:2021 Rubber, vulcanized or thermoplastic — Determination of density
KS M 1071-2-2022 Determination of boiling temperature for chemical agents
KS M ISO 7327-2010(2020) Plastics－Hardeners and accelerators for epoxide resins－Determination of free acid in acid anhydride
KS M 1071-2-2017 Determination of boiling temperature for chemical agents
KS M ISO 7327:2010 Plastics－Hardeners and accelerators for epoxide resins－Determination of free acid in acid anhydride
KS M ISO 7327-2020 Plastics－Hardeners and accelerators for epoxide resins－Determination of free acid in acid anhydride

GM North America

GM GMP.TPU.023-1995 Thermoplastic Polyurethane - 58 Type D Hardness, 1.5% Mineral Oil Lubricant, Post Molding Cured
GM 9985523-1989 SEALER - LIGHTWEIGHT PLASTISOL, LOW TEMPERATURE CURE
GM 9985198-1989 SEALER, PLASTISOL, VINYL

Association Francaise de Normalisation

NF T70-360:2007 Energetic materials for defence - Physico-chemical analyses and properties - Measurement of the penetration depth of plasticizers and/or deterrents - Method by microscopy
NF EN 1238:2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ball and ring method)
NF T45-012:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of density-viscosity.
NF EN ISO 4597-1:2008 Plastiques - Durcisseurs et accélérateurs pour résines époxydes - Partie 1 : désignation
NF T51-021*NF EN ISO 306:2014 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
NF T51-177-1*NF EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins - Part 1 : designation
NF T51-561:2011 Plastics - Determination of density as a function of temperature - Immersion method
NF T45-031:1994 UNVULCANIZED RUBBER. DETERMINATION OF PLASTICITY. RAPID-PLASTIMETER METHOD.
NF EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of the Vicat softening temperature (VST)
NF T43-013:1994 Unvulcanized rubber. Determination of plasticity. Rapid-plastimeter method.
NF T51-198:1979 Plastics. Guidelines for rapid temperature variation tests.-.
NF EN ISO 7327:1997 Plastics - Hardeners and accelerators for epoxy resins - Determination of free acid in acid-anhydride
NF T51-177:1998 Plastics - Hardeners and accelerators for epoxide resins - Part 1 : designation.

FI-SFS

SFS 3144-1980 plastic pipe. Temperature change test
SFS 3230-1976 plastic. Determination of viscosity of polyvinyl chloride in diluent

CH-SNV

VSM 15158-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
SNV 93100-1966 Plastic (organic plastic) material testing. Complies with Vicat’s thermoplastic softening temperature regulations

TR-TSE

TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS

American Society for Testing and Materials (ASTM)

ASTM UOP254-14 Apparent Bulk Density of Fluid Cracking Catalyst
ASTM UOP254-87 Apparent Bulk Density of Fluid Cracking Catalyst
ASTM UOP715-85 Rhenium Catalysts by Spectrophotometry
ASTM UOP294-93 Apparent Bulk Density of Catalyst Particles
ASTM UOP778-07 Packed Apparent Bulk Density (ABD) of Extruded Catalyst

Universal Oil Products Company (UOP)

UOP 254-2014 Apparent Bulk Density of Fluid Cracking Catalyst

PL-PKN

PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
PN C89076-1974 Plas?ics Determination of stiffness in ?orsion as a function o? temperatur?
PN C89350-1967 Adhesives ?or unplasticized polyvinyl chloride pipe-lines Adhesive W
PN B06243-1990 Admixtures for concrete Plasticizing and superplasticizing admixtures Requirements and testing at influence for concrete

British Standards Institution (BSI)

BS 4887-1:1986(1999) Mortar admixtures — Part 1 : Specification for air - entraining (plasticizing) admixtures
BS ISO 2781:2018 Rubber, vulcanized or thermoplastic. Determination of density
BS ISO 2007:2007 Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method
BS ISO 19979:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins -Part 1: Designation
BS EN 1238:2011 Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
PD ISO/TS 23301:2023 STEP geometry visualization services
BS ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
BS EN ISO 306:2022 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
PD ISO/TS 23301:2021 STEP geometry visualization services
17/30291652 DC Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 48-3:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 15509:2019 Adhesives. Determination of the bond strength of engineering-plastic joints
BS ISO 48-9:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Calibration and verification of hardness testers
BS EN ISO 7327:1997(2000) Plastics — Hardeners and accelerators for epoxide resins — Determination offree acid in acid anhydride
BS EN ISO 7327:1996 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride

(U.S.) Ford Automotive Standards

FORD WSS-M4D1006-A2-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 70 DUROMETER D HARDNESS BLOW MOLDING COMPOUND
FORD ESB-M4G300-C-1993 SEALER, INJECTION MOLDED OR EXTRUDED POLYOLEFIN, HEAT EXPANDING, FAST CURE
FORD WSB-M4G344-A-1993 SEALER, BUTYL, HIGH VISCOSITY, EXTRUDABLE, NON-SOLVENT TYPE, DISPERSIBLE CARRIER
FORD ESB-M4G300-A-2000 SEALER, INJECTION MOLDED POLYOLEFIN - HEAT EXPANDING - HIGH TEMPERATURE CURE

Standard Association of Australia （SAA）

AS 1368:2000 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Spanish Association for Standardization (UNE)

UNE 53 018 Determination of moisture content of molding compounds
UNE-EN 1238:2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
UNE-EN 1238:2000 ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL)
UNE 53120:2016 Plastics -- Determination of the brittleness temperature by impact
UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
UNE-CEN/TS 14999:2006 EX Adhesives for thermoplastic piping systems - Accelerated ageing test of adhesives

GSO

GSO ISO 4597-1:2013 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation
OS GSO ISO 4597-1:2013 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation
NB/SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalyst
OS GSO ISO 974:2015 Plastics -- Determination of the brittleness temperature by impact
OS GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
OS GSO ISO 17223:2016 Plastics -- Determination of yellowness index and change in yellowness index
BH GSO ISO 17223:2017 Plastics -- Determination of yellowness index and change in yellowness index
GSO ISO 17223:2016 Plastics -- Determination of yellowness index and change in yellowness index
GSO ISO 16869:2014 Plastics -Assessment of the effectiveness of fungistatic compounds in plastics formulations
GSO ISO 15509:2013 Adhesives - Determination of the bond strength of engineering-plastic joints
OS GSO ISO 15509:2013 Adhesives - Determination of the bond strength of engineering-plastic joints
OS GSO ISO 7327:2015 Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride
NB/SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst supports by mechanical tapping
GSO ISO 7327:2015 Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride

Danish Standards Foundation

DS/EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation
DS/EN 1238:2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Japanese Industrial Standards Committee (JISC)

JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 6253:2006 Rubber, vulcanized or thermoplastic -- Determination of hardness
JIS K 7216:1980 Testing method for brittleness temperature of plastics
JIS K 6929-1:1996 Plastics -- Hardeners and accelerators for epoxide resins -- Part 1: Designation

CU-NC

NC 30-59-1987 Plastics. PVC Resins for General Use. Determination of Plasticizer Absorption at Room Temperature

NO-SN

NS 9508-1985 Plastics - Determination of the brittleness temperature by impact

Lithuanian Standards Office

LST EN 1238-2011 Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)

DIN

DIN CEN/TS 14999:2006 Adhesives for thermoplastic piping systems - Accelerated aging test of adhesives; German version CEN/TS 14999:2006

GM Holden Ltd

HOLDEN HN 2014-2005 Adhesive - Hot Melt - High Softening Point
HOLDEN HN 2493-2008 ADHESIVE - HOT MELT, High Softening Point

HU-MSZT

MSZ 2636-1968 Steel Thickness Geometric Inspection

Indonesia Standards

SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

KR-KS

KS M ISO 2781-2021 Rubber, vulcanized or thermoplastic — Determination of density

CO-ICONTEC

ICONTEC 3305-1992 plastic. Estimation of plasticizers in plastics

Others: how long cdna is stored,Plasticizer,How many times is Fulin today?,How many degrees of plasticizer,estrone plasticizer,How many degrees of liquid nitrogen tank,How much plasticizer,how many times cdna is preserved,xrd degrees per minute,cdna is stored at what temperature,Three plasticizers,How many degrees of constant weight,How many degrees of technology,How long are exosomes stored,how many degrees,Plasticizers 18 items,wheat white degree,Naphthalene plasticizer,18 kinds of plasticizers