Plastic polystyrene

Plastic polystyrene, Total:349 items.

The international standard classification for "Plastic polystyrene" includes: Thermoplastic materials , Cellular materials , Adhesives , Plastics in general , Latex and raw rubber .

The Chinese standard classification for "Plastic polystyrene" includes: Synthetic resin and plastic , Labor safety technology in general , Packaging material and container , Basic standards and general methods for synthetic resin and plastic , Adhesives , Synthetic rubber .

Professional Standard - Machinery

JB/T 11346-2013 EPS Sheet Cutting Machine
JB/T 5293-1991 Expandable Polystyrene Foamed Plastics Forming Machine
JB/T 11345-2013 EPS Block Molding Machinery
JB/T 5293-2013 EPS Automatic shape moulding machine
JB/T 11347-2013 EPS Pre-expander Machine
JB/T 53124-1999 Expandable polystyrene foam molding machine product quality classification

Hebei Provincial Standard of the People's Republic of China

DB/T1300 G32 3-1988 Expandable polystyrene beads

Professional Standard - Light Industry

QB 1110-1991 Safety Procedure in Manufacturing Polyurethane, Polystyrene and Polyethylene Foam Plastic
QB/T 5166-2017 Extruded polystyrene foam board (XPS) for cold storages
QB/T 5167-2017 Extruded polystyrene foam board (XPS) for civil engineering application
QB/T 4009-2010 Expandable polystyrene(EPS) resin
QB/T 3807-1999 Cellular plastics. Polystyrene foam for thermal insulation
QB/T 1649-1992 Polystyrene Foam Plastic Packaging Material

Group Standards of the People's Republic of China

T/CPPIA 21-2022 Extruded polystyrene foam(XPS) board for floor heating
T/CSTM 00480-2021 Molded polystyrene thermal insulation permanent formwork
T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/JSBC 4-2020 Recycled polystyrene compound
T/ZZB 2752-2022 Styrene for polymerization-specificatioan
T/GZPPIA 01-2018 Polystyrene buoyancy
T/SHPTA 066-2023 Plastics-Modified Polycarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for vehicle
T/GDPIA 31-2021 Plastics－Green recycled acrylonitrile-butadiene-styrene (ABS) for air-conditioner
T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam
T/HBCERI 008-2024 Technical specifications for plastic polystyrene (PS)
T/ZZB 1652-2020 Disposable serological pipettes（Polystyrene）

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 33094-2016 Plastics一Antistatic impact-resistant polystyrene compound
GB/T 38286-2019 Polyethylene(PE),polypropylene(PP)and polystyrene(PS)resin—Determination of peroxide value
GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
GB/T 10801.1-2021 Moulded polystyrene foam for thermal insulation（EPS）
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography
GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 10801.2-2002 extruded polystyrene foam board for thermal insulation (XPS)
GB/T 29645-2013 Plastics—Recycled polystyrene compound
SN/T 4156-2015 Determination of divinyl benzene in the imported and exported polystyrene poke-Gas chromatography-mass spectrometry
GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB 12671-1990 Polystyrene resin
GB/T 10801.1-2002 polystyrene foam board for thermal insulation
GB/T 10801.2-2018 Rigid extruded polystyrene foam board for thermal insulation(XPS)
GB/T 12671-2008 Polystyrene (PS) resin
GB/T 24150-2009 Plastics—Flame retardant impact-resistant polystyrene compound
GB/T 30925-2014 Plastics―Ethylene-vinyl acetate copolymer(EVAC)thermoplastics―Determination of vinyl acetate content
GB/T 33094-2016(英文版) Plastics Impact-resistant polystyrene antistatic material

Professional Standard - Petrochemical Industry

SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1610-2011 Thermoplastic Elastomers Styrene-butadiene block copolymer
SH 1540-1993 Styrene/Acrylonitrile (SAN) Copolymer Molding and Extrusion Nomenclature
SH/T 1812-2017 Thermoplastic elastomers. Styrene-isoprene block copolymer(SIS)
SH 1590-1994 Anti-impact resin of styrene-butadiene series
SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials

Professional Standard - Commodity Inspection

SN/T 0514-1995 Determination of expansion rate for import and export expandable polystyrene raw materials
SN/T 0560.1-1996 Determination of size of expandable polystyrene raw materials for import and export
SN/T 0560.2-1996 Determination of moisture content for import and export expandable polystyrene raw materials
SN 0625.2-1997 Inspection rules of imported plastic scrap as raw material. Polymer scrap of ethylene|| styrene|| vinyl chloride respective and others

Professional Standard - Chemical Industry

HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)
HG/T 4999-2016 Tristyrylphenol ethoxylates

Professional Standard - Agriculture

QB/T 1649-2024 Polyethylene foam plastic packaging material
SN/T 0625.2-1997 Rules for the inspection of imported waste plastics that can be used as raw materials—waste of ethylene, styrene, vinyl chloride polymers and other polymers (for trial implementation)

Professional Standard - Building Materials

JC/T 2627-2021 Classification of alkali aluminosilicate glass
JC/T 2441-2018 Graphite modified expanded polystyrene foam board for building thermal insulation

Military Standard of the People's Republic of China-General Armament Department

GJB 62-1985 General specification for precision polystyrene capacitors with reliability indicators

German Institute for Standardization

DIN 7741 Beiblatt:1968 Polystyrene Moulding Compound Properties of Polystyrene Moulding Compound Test Pieces
DIN 7741-1:1968 Poly(styrene) moulding materials based on styrene homopolymers
DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)
DIN EN ISO 14631 E:2021-04 Impact modified polystyrene extruded board (draft)
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; English version of DIN EN 15342:2008-02
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-2:2018-03 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN EN ISO 6402-2:2004-05 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN 15342:2024 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates; German and English version prEN 15342:2024
DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007
DIN EN 15342:2024-03 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates; German and English version prEN 15342:2024 / Note: Date of issue 2024-02-02*Intended as replacement for DIN EN 15342 (2008-02).
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN EN ISO 6402-1:2003-02 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN 53718:1961 Testing the methanol soluble content in polystyrene
DIN 55471-1 Cellular polystyrene for packaging; requirements and testing
DIN EN ISO 19064-2 E:2019-04 Plastic Styrene Acrylonitrile (Draft)

GM North America

GM GMP.PS.004-1993 PS - Expandable Polystyrene
GM GM6055M-1986 Polystyrene Plastics Replaced by GM7000M
GM GMN6872-2001 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A90, Interior, Paintable
GM GMP.TES.011-1997 Thermoplastic Elastomer - Styrene Block Copolymer, 65 Shore A
GM GM6065M-1986 Polystyrene Plastic Molding Compounds Replaced by GM7001M
GMP.TES.030-2007 Thermoplastic Elastomer , Styrenic Block Copolymer, Shore D35, Interior, Paintable
GM GMP.S/MA.008-1991 Styrene Maleic Anhydride - Expandable Copolymer, High Heat Resistant
GMP.TES.002-2005 Thermoplastic Elastomer ?Styrene Block Copolymer, Shore A60, Interior Revision C
GM GMP.TES.002-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior
GM GMP.S/MA.006-1991 Styrene Maleic Anhydride - Expandable Copolymer
GM GMP.TES.015-2000 Thermoplastic Elastomer - Styrene Block Copolymer Interior, , Shore A 50, Paintable
GM GMP.S/MA.007-1991 Styrene Maleic Anhydride - Expandable Copolymer Medium Heat Resistant
GM GMP.TES.013-2003 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior/Exterior
GM GMN7304-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A70, Interior/Exterior

RO-ASRO

STAS 10365-1983 PLASTICS Determination of soluble substanees in methyl aleohol of polystirene
STAS 10045-1989 PLASTICS Styrefte determination ol polystyrene
STAS 7461-1984 Cellular plastics CELL.ULAMR POL YSTYRENE
STAS 7862-1980 POLYSTYRENE
STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS 9410-1980 SHOCK-RESISTANT POLYSTYRENE PLATES
STAS 7861-1980 IMPACT RESISTANT POLYSTYRENE

CZ-CSN

CSN 64 0321-1963 Testing of polystyrene hermoplastics
CSN 64 3006-1979 Expanable polystyrenes. General requirements
CSN 64 3510 Z2-1996 plastic. brick expanded polystyrene
CSN 64 3000-1979 Polystyrene thermo- plastics. General requirements
CSN ON 07 7621-1967 filter polystyrene
CSN 64 3004-1983 Polystyrene - homopoly- mer. Designation
CSN 64 3510 Z1-1995 brick expanded polystyrene
CSN 64 3510-1986 Expanded polystyrene boards

American Society for Testing and Materials (ASTM)

ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D2123-81 Standard Specification for SHEET RIGID POLY(VINYL CHLORIDE-VINYL ACETATE) PLASTIC
ASTM D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
ASTM D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)

GM Holden Ltd

HOLDEN HN 1459-2001 Polystyrene Moulding Compounds
HOLDEN HN 2198-2000 Foam - Polystyrene - PPO
HOLDEN HN 2312-2002 Thermoplastic Elastomer Styrene Block Copolymers
HOLDEN HN 2312-2012 Thermoplastic Elastomer Styrene Block Copolymer
HOLDEN HN 2476-2006 ELASTOMER ?THERMOPLASTIC - STYRENIC TYPE SEBS, 75 SHORE A
HOLDEN HN 1854-2009 EXPANDED POLYSTYRENE
HOLDEN HN 2198-2014 FOAM - POLYSTYRENE - PPO
HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)

US-FCR

FCR FED PS31-70-1971 POLYSTYRENE PLASTIC SHEET

Japanese Industrial Standards Committee (JISC)

JIS K 6870:1995 Polystyrene moulding materials
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6872:1995 Polystyrene sheets

U.S. Military Regulations and Norms

ARMY MIL-P-14571 A-1960 PLASTIC, POLYSTYRENE, MODIFIED; FABRICATED PARTS
ARMY MIL-P-21922 B VALID NOTICE 1-1988 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B-1973 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B (1)-1974 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-60312 C NOTICE 2-2009 PARTS, MOLDED, PLASTIC FORM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312C (2)-1986 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312C-1975 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312 C-1975 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
ARMY MIL-P-60312 C (2)-1986 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)

British Standards Institution (BSI)

BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS 1493:1948 Specification for polystyrene moulding materials
BS 1493:1967 Specification for polystyrene moulding materials
BS 1493:1958 Specification for polystyrene moulding materials
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
BS EN ISO 6402-2:2003(2004) Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS 3290:1960 Specification for toughened polystyrene extruded sheet
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN 15342:2025 Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
BS 3837-2:1990 Expanded polystyrene boards-Specification for extruded boards
BS 3126:1959 Specification for toughened polystyrene moulding materials
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN 15342:2007 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 4894-1:1990 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials-Designation
BS ISO 2580-2:1995 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 4894-2:1996 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene

GM Europe

GME STD 518736-1996 TPE 8736 SEBS+PP TPE 8736 SEBS+PP English/Swedish
GME STD 518783-1996 Cellular plastic 8783 PS+PPO Cellplast 8783 PS+PPO
GME STD 518755-1997 Plastic 8755 PVC/ABS Plast 8755 PVC/ABS English/Swedish
GME QK 000202-1983 Polystyrol - Formmasse, schlagfest Polystyrene - Moulding Compounds, Impact Resistant German
GME QK 000753-1998 Modified thermoplastic elastomer materials based on styrene-ethylene/butylene-styrene. English/German
GME QK 000211-1998 Polystyrene - Moulding Compound, Impact Resistant (English/German)
GME STD 518789-1996 Cellular plastic 8789 PS Cellplast 8789 PS English/Swedish
GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000288-2005 ABS-Moulding Compound (English/German)
GME QK 000317-1983 ABS-Formmasse ABS-Moulding Compounds English/German
GME QK 000269-1999 Acrylonitrile-Butadiene-Styrene Copolymer (ABS) Molding Compound English/German
GME STD 518361-2001 Plastic 8361 ABS Plast 8361 ABS English/Swedish
GME STD 518731-1995 Plastic 8731 ABS Plast 8731 ABS English/Swedish
GME STD 518743-1998 Plastic 8743 ABS Plast 8743 ABS English/Swedish
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)

TH-TISI

TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)

Association of German Mechanical Engineers

DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics

AR-IRAM

IRAM 13 310-1962 Determination of soluble styrene content in polystyrene

FI-SFS

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium
SFS-ISO 2897/2 E:1986 Plastics. Impact-resistant polystyrenes. Part 2: Determination of properties

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

International Organization for Standardization (ISO)

ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/R 173:1961 Withdrawal of ISO/R 173-1961
ISO 1622:1975 Plastics — Polystyrene moulding and extrusion materials — Designation
ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 1622-2:1980 Plastics; Polystyrene moulding and extrusion materials; Part 2 : Determination of properties
ISO 2897-2:1981 Plastics; Impact-resistant polystyrenes; Part 2 : Determination of properties
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 13636:2012 Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets
ISO 4894-2:1981 Plastics; Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials; Part 2 : Determination of properties
ISO 2580-2:1982 Plastics; Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials; Part 2 : Determination of properties
ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene

GCC Standardization Organization

GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 16152:2013 Plastics - Determination of xylene-soluble matter in polypropylene
GSO EN 15342:2023 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
GSO ISO 14631:2015 Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods

Korean Agency for Technology and Standards (KATS)

KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 3203-2003 POLYSTYRENE SHEETS
KS M 3203-1976 POLYSTYRENE SHEETS
KS M 3203-1997 POLYSTYRENE SHEETS
KS M 3203-2004 POLYSTYRENE SHEETS
KS M ISO 16152:2006 Plastics－Determination of xylene-soluble matter in polypropylene
KS M ISO 14631-2007(2017) Extruded sheets of impact－modified polystyrene(PS－I)－Requirements and test methods
KS M ISO 14631-2022 Extruded sheets of impact－modified polystyrene(PS－I)－Requirements and test methods
KS M 3360-2001 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO EN 15342:2023 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates

Association Francaise de Normalisation

NF T51-006:1957 Plastics. Determination of methanol-soluble polystyrene.
NF T50-801*NF EN 15342:2008 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T51-912:1980 PLASTICS. POLYSTYRENE MOULDING AND EXTRUSION MATERIALS. DETERMINATION OF PROPERTIES.
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF EN 15342:2008 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
NF T51-901:1981 Plastics. Determination of residual styrene monomer in polystyrene by gas chromatography.
NF T56-201:1988 Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.
NF T51-820*NF EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content

Ente Nazionale Italiano di Unificazione

UNI EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Designation system and basis for specifications
UNI 9263:1988 Elastomers. Determination of polystyrene blocks in styrene-butadiene rubber and styrene-reinforced latices.
UNI EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determina...
UNI EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificat...
UNI ISO 1622-1:1990 Plastics. Polystyrene (PS) moulding and extrusion materials. Designation.
UNI EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
UNI ISO 1872-2:1992 Plastics. Polyethylene (PE) and ethylene copolymer thermoplastics. Preparation of test specimens and determination of properties.

GM Daewoo

GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
GMKOREA EDS-M-4626-2014 Polypropylene and Styrene Butadiene Styrene Copolymer Blend (Version 10; English/Korean)

European Committee for Standardization (CEN)

EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
prEN 15342 rev Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Swedish Institute for Standards

SS-EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
SS-EN ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
SS-ISO 2561:2013 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography (ISO 2561:2012, IDT)
SS-EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022)

Spanish Association for Standardization (UNE)

UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
AENOR UNE 53059:1981 PLASTICS. DETERMINATION OF THE PERCENTAGE SOLUBLE IN METHANOL OF POLYSTYRENE MATERIALS
UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
UNE-EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...

Society of Automotive Engineers (SAE)

SAE AMS3620 Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620B Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620A Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620B-1987 Plastic Moldings and Extrusions-Polystyrene
SAE AMS3620B-1984 PLASTIC MOLDINGS & EXTRUSIONS POLYSTYRENE
SAE AMS3620-1946 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3620A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene

TR-TSE

TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION
TS 3423-1979 PLASTICS - DESIGNATION OF IMPACT RESISTANT POLYSTYRENES
TS 3435-1979 PLASTICS - POLYSTYRENE MOULDING AND EXTRUSION MATERIALS - DESIGNATION
TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY
TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
TS 146-1964 PLASTICS DETERMINATION OF METHANOL-SOLUBLE MATTER ?N POLYSTYRENE

Magyar Szabványügyi Testület

MSZ 7452-1961 Detecting soluble components in polystyrene to detect plastics

PL-PKN

PN C89068-1961 Polystyrene. Deferminafion of ?he S?yrene-con?en?s
PN C89416-1990 Plastics Determination of resistance of polystyrene and styrene copolymers to attack by trichlorofluoromethane
PN C89292-1971 Polystytene (homopolymer)
PN O79783-1986 Plastics packages Moulders from expanded polystyrene
PN C89062-1959 Polystyrene. Determination of methanol content of soluble matter
PN C89214-1991 Unplasticized poly(vinyl chloride) pipes. Determination of tensile properties

CH-SNV

VSM 77122-1965 plastic. Thermal plasticity forming parts based on polystyrene. VSM 77200 Material Properties on page 4

Consumer Electronics Association （U.S.)

16 CFR 1611 2021 STANDARD FOR THE FLAMMABILITY OF VINYL PLASTIC FILM

Danish Standards Foundation

DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DS/EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
DANSK DS/EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
DS/EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
DS/EN ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods

Standards Norway

NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN 15342:2007 Plastics — Recycled Plastics — Characterization of polystyrene (PS) recyclates

American National Standards Institute （ANSI)

ANSI/ASTM D6339:1998 Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ANSI/ASTM D4673:1998 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials, Specification for (08.03)
ANSI/ASTM D4549:1985 Specification for Polystyrene Molding and Extrusion Materials (PS) (95-1, Item 24) (08.03)
ANSI/ASTM D5676:1999 Specification for Recycled Polystyrene Molding and Extrusion Materials (08.03)

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN 15342-2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates

IL-SII

S.I.533-1967 POLYSTYRENE SHEETS

IT-UNI

UNI 7066-1972 Polystyrene thermoplastic material (PS). Classification
UNI 7872-1978 plastic material. Shockproof polystyrene (SB). Grading method
UNI EN ISO 14631:2021 Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods

(U.S.) Ford Automotive Standards

FORD ESB-M5G26-F-1987 BARRIER, ETHYLENE VINYL ACETATE - MOLDABLE (SPECIFIC GRAVITY 2.1)
FORD WSB-M4D844-A10-2005 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSB-M4D844-A10***
FORD ESB-M5G50-A-1988 BARRIER, ETHYLENE VINYL ACETATE, MOLDABLE

SE-SIS

SIS 16 66 01-1963 Polystyrene. Determination of methanol-soluble matter
SIS SS-ISO 2561:1987 Plastics - Determination of residual styrene monomer in polystyrene by gas chromatography

South African Bureau of Standard

SANS 1508:2007 Expanded polystyrene thermal insulation boards

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification

The American Road & Transportation Builders Association

AASHTO M 230-1998(2002) Standard Specification for Extruded Foam Board (Polystyrene)
AASHTO M 230-2007(2020) Standard Specification for Extruded Foam Board (Polystyrene)

AASHTO - American Association of State Highway and Transportation Officials

M 230-1998 Standard Specification for Extruded Foam Board (Polystyrene)

Military Standards (MIL-STD)

DOD A-A-53887-1989 PROP, MOUTH, DENTAL, STYROFOAM

Defense Logistics Agency

DLA L-P-535 E NOTICE 4-2012 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

Indonesia Standards

SNI 7323-2008 Plastic - Tableware - Polystyrene foam
SNI 06-0176-2000 High impact polystyrene

SG-SPRING SG

SS 356-1991 SPECIFICATION FOR Disposable Polystyrene Cutlery

Malaysia Standards

MS 1502-2000 Specification for disposable polystyrene cutlery

United States Navy

NAVY MIL-P-19644 C INT AMD 1-1991 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)
NAVY MIL-P-19644 C-1970 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)

Gosstandart of Russia

GOST 25910-1983 Polystyrene. Designation
GOST 12998-1985 Polystyrene film. Specifications

Canadian General Standards Board （CGSB)

CAN3-A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
CAN3 A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives