Efficient catalyst
Efficient catalyst, Total:249 items.
The international standard classification for "Efficient catalyst" includes: Other products of the chemical industry , Products of the chemical industry in general , Surface active agents , Other organic chemicals , Thermoplastic materials , Other non-ferrous metals and their alloys , food products in general .
The Chinese standard classification for "Efficient catalyst" includes: Catalyst , Basic standards and general methods for catalyst , Chemical additive , Rare metals and their alloys , Foods fermentation and brewing in general .
Guizhou Provincial Standard of the People's Republic of China
- DB52/T 1095-2016 CHP series high-efficiency catalysts for sulfur dioxide oxidation to sulfuric acid
Group Standards of the People's Republic of China
- T/CNIA 0053-2020 Platinum carbon catalyst
- T/SICCA 003-2018 Indoor air-purification photocatalyst
- T/CICEIA /CAMS26-2021 Diesel engine — Cu-zeolite SCR catalyst for NOx emission control
- T/SDHCIA 033-2022 Regenerated Copper Raw Materials Made from Waste Catalysts
- T/CSTM 00065-2019 Catalyst for oxidation of acrolein to acrylic acid
- T/SACE 016-2020 Nickel Alloys Made from Spent Catalysts
- T/CSTM 00319-2020 Front-end hydrogenation catalyst for C2 fraction
- T/CRIAC 0020-2020 Chemical reagent— Acetone for high performance liquid chromatography
- T/HEBQIA 055-2022 Catalyst micro-reactor evaluation device
- T/SACE 017-2020 Zinc Oxide from Spent Catalyst
- T/CSTM 01240-2024 Prehydrogenation catalyst for catalytic cracking gasoline
- T/GDBX 059-2022 Palladium-carbon catalyst
- T/SDHCIA 032-2022 Regenerated FCC Equilibrium Catalyst
- T/CBMF 70-2019 Visible light photocatalytic antibacterial agent
- T/CRIAC 0021-2020 Chemical reagent— Hexane for high performance liquid chromatography
- T/CNIA 0058-2020 Carbon supported palladium hydroxide catalyst
- T/CAQI 22-2016 Biological-enhanced pretreatment of wastewater—High-efficiency catalytic reactor
- T/CSTM 00552-2022 Kaolin clay for cracking catalyst
- T/CNIA 0052-2020 Ruthenium zinc catalyst
- T/GDBX 060-2022 Platinum-carbon catalyst
- T/CAEPI 82-2024 High-pore-density honeycomb catalyst for denitrification of exhaust gases from gas-fired boilers
- T/CNIA 0050-2020 Alumina Supported Ruthenium Catalyst
- T/CSTM 01264-2024 The determination method for acid accessibility index of catalytic cracking catalyst
- T/SDCA 40-2022 Catalyst formulation for suspension bed hydrogenation
- T/CNIA 0051-2020 Alumina Supported Palladium Catalyst
- T/QGCML 1910-2023 Low magnetic agent and resurrection catalyst
- T/CNIA 0054-2020 Rhodium Carbon Catalyst
- T/SDHCIA 035-2023 Sodium tungstate made from waste catalyst
- T/CRIAC 0019-2020 Chemical reagent— Isopropyl alcohol for high performance liquid chromatography
- T/CIEP 0012-2024 Determination of carbon content of catalysts in catalytic cracking and catalytic reforming units - Elemental analyzer method
- T/CSTM 00525-2022 Selective hydrodesulfurization catalyst for fluid catalytic cracking gasoline
- T/SACE 018-2020 High-alumina china clay made from waste catalyst
- T/SACE 015-2020 Blister Copper Made from Waste Catalyst
- T/CSTM 00064-2019 Catalyst for oxidation of propylene to acrolein
- T/CRRA 0709-2023 Collection, packaging and sampling of catalytic combustion spent catalysts
- T/CASME 99-2022 Noble metal catalyst support High purity pseudoboehmite
- T/CNIA 0057-2020 Calcium Carbonate Supported Palladium Catalyst
- T/CSTM 00526-2022 Hydroisomerization and hydrodesulfurization catalyst for fluid catalytic cracking gasoline
- T/CRIAC 0026-2020 Chemical reagent— Toluenefor high performance liquid chromatography
- T/CIESC 0018-2021 FCC regenerated equilibrium catalyst
- T/CNIA 0056-2020 Barium Sulfate Supported Palladium Catalyst
工业和信息化部
- HG/T 5765-2020 Determination method of metallic elements in catalytic cracking catalysts
- HG/T 5313-2018 Special catalysts for FCC MIP process for promoting isoparaffin and propylene
- HG/T 5767-2020 Catalysts for cobalt and molybdenum sulfide
- HG/T 5529-2019 Methanol hydrogen production catalysts
- HG/T 5035-2016 Test method of catalytic performance in the catalyst for nitrobenzene hydrogenation to aniline
- HG/T 5597-2019 Test method of activity for high precision removal of H2S and Cos purification catalyst
- HG/T 5194-2017 Alkylation catalyst activity test method
- HG/T 2779-2016 Sulfur-tolerant carbon monoxide shift catalysts
- HG/T 5525-2019 Al-Ni alloy hydrogenation catalyst
- HG/T 5770-2020 Ammonia decomposition hydrogen production catalysts
- HG/T 5416-2018 Prereduced ammonia synthesis catalyst
- HG/T 5314-2018 Rare earth containing catalytic cracking additive for heavy oil with high distillate yields
- HG/T 5405-2018 Test method of catalytic performance for ethylene polymerization catalyst
- HG/T 5036-2016 Test method of catalytic performance for organic sulfur conversion absorption catalysts at room temperature
- HG/T 5315-2018 Alkylation catalyst used for purification process
- HG/T 5596-2019 Sulfur-tolerant carbon monoxide shift catalysts in medium-high pressure
- HG/T 6055-2022 Ruthenium-based catalyst for ammonia synthesis
Professional Standard - Chemical Industry
- HG/T 2273.2-2004 The natural gas catalyst for secondary reforming
- HG/T 3546-2011 High temperature carbon monoxide shift catalysts
- HG/T 3544-2006 Test method of actavity for high temperature carbon monoxide shift catalyst
- HG 2505-2004 Organic sulphur hydrogenation catalyst
- HG/T 5596~5597-2019 Medium and high pressure sulfur-resistant shift catalyst for carbon monoxide and activity test method for high-precision removal of hydrogen sulfide and sulfur oxide carbon purification catalyst (2019)
- HG/T 4556-2013 The catalyst for cyclohexanol dehydrogenation
- HG/T 2510-1993 Methanation Catalyst Test Method
- HG 3556-2004 Low temperature carbon monoxide shift catalyst
- HG/T 6227-2023 Analysis method of chemical composition of catalytic cracking catalyst X-ray fluorescence spectrometry
- HG/T 5029~5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
- HG/T 5035~5037-2016 Catalytic Performance Test of Nitrobenzene Hydrogenation to Aniline Catalyst and Normal Temperature Organic Sulfur Conversion and Absorption Catalyst and Activity Test Method of Methanol Hydrogen Production Catalyst (2016)
- HG/T 5313~5314-2018 Special Catalyst for Catalytic Cracking to Increase Production of Isoparaffins and Propylene Production and Rare Earth Containing High Liquid Yield Heavy Oil Catalytic Cracking Cocatalyst (2018)
- HG/T 6225-2023 Chromium-based ethylene polymerization catalyst
- HG/T 2976-1983 Fertilizer Catalyst Wear Rate Determination
- HG/T 3544-2014 Test method of activity for high temperature carbon monoxide shift catalyst
- HG/T 5584~5587-2019 Terephthalic acid hydrorefining catalyst, activity test method of ruthenium-based ammonia synthesis catalyst, chemical composition analysis method of supported ammonia synthesis catalyst, and chemical composition analysis method of catalyst for hydrogenat
- HG/T 2271-2007 The platinum catalyst Oxidizing ammonia into nitric acid
- HG/T 3550-2004 Ammonia synthesis catalyst
- HG/T 2273.1~2273.3-2013 Natural gas conversion catalyst, thermal protection agent (2013)
- HG/T 5764~5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
- HG/T 6282-2024 Determination of Carbon Monoxide Index of Catalytic Cracking Catalyst
- HG/T 2976-2011 Test method for attrition and abrasion of fertilizer catalysts
- HG/T 4387-2012 Butylene Hydration Resistance High-temperature Resin Catalyst
- HG/T 4553-2013 Test Method of Activity for Sulfur-tolerant Carbon Monoxide Shift Catalysts in Medium-high Pressure
- HG/T 2779-1996 Carbon Monoxide Sulfur Tolerant Shift Catalyst
- HG/T 5204~5205-2017 Butyraldehyde vapor phase hydrogenation system butanol catalysts
- HG/T 4853-2015 Cesium catalyst of sulfuric acid production use
- HG/T 5038~5040-2016 Analytical method of chemical compositionin pre-reduced ammonia synthesis catalysts
- HG 2086-2004 The catalyst oxidizing sulphuric dioxide into sulphuric acid
- HG/T 2086-2013 The Catalyst Oxidizing Sulphuric Dioxide Into Sulphuric Acid
- HG/T 3556-2012 Low Temperature Carbon Monoxide Shift Catalysts
- HG/T 2273.1-2004 The natural gas catalyst for primary reforming
- HG 2509-1993 methanation catalyst
- HG/T 2509-2012 Methanation Catalysts
- HG/T 6139-2023 Regenerated antimony pentachloride catalyst
- HG/T 2509-2004 Methanation catalyst
- HG 2505-1993 Organic Sulfur Hydrogenation Catalyst
- HG/T 4227-2011 isobutylene etherification resin catalyst
- HG/T 2271-2014 The platinum catalyst Oxidizing ammonia into nitric acid
- HG/T 4107-2009 Methanol synthesis catalysts
- HG/T 3545-1990 Determination of ammonia aynthesis catalyst
- HG/T 5759~5762-2020 Normal temperature iron oxide desulfurizer, dimethyl ether carbonylation to methyl acetate catalyst, dimethyl ether carbonylation to methyl acetate catalyst catalytic performance test method and chromium-based ethylene polymerization catalyst chemical com
- HG/T 2693-1995 一氧化碳高温变换催化剂化学成份的测定
- HG/T 2693-2007 Analytical method of chemical composition in high temperature carbon monoxide shift catalyst
- HG/T 5405~5407-2018 Test methods for catalytic performance of ethylene polymerization catalysts, test methods for sulfur capacity of inorganic sulfur catalysts in deliquefied gas, and test methods for activity of sweetening catalysts at room temperature (2018)
- HG/T 2693-2014 Analytical method of chemical composition in high temperature carbon monoxide shift catalyst
- HG/T 2505-2012 Organic Sulphur Hydrogenation Catalysts
- HG/T 4349-2012 Carbonyl sulfide hydrolyzed catalysts at room temperature
- HG 3546-2002 High temperature carbon monoxide shift catalysts
- HG/T 4675-2014 Precipitated iron catalyst for Fischer-Tropsch synthesis
- HG/T 3550-2013 Ammonia Synthesis Catalyst
- HG/T 2086-2004 The catalyst oxidizing sulphuric dioxide into sulphuric acid
- HG/T 3542-1986 Analytical Method for Trace Sulfur in Fertilizer Catalysts
- HG/T 2273.1-2013 The Natural Gas Catalyst for Primary Reforming
- HG/T 6283-2024 Catalytic cracking of light olefins promoter
- HG/T 2976-1999 Determination for attrition and abrasion of fertilizer catalyst
- HG/T 4107-2016 Methanol synthesis catalysts
- HG/T 2505-2004 Organic sulphur hydrogenation catalyst
- HG/T 2273.2-2013 The Natural Gas Catalyst for Secondary Reforming
- HG/T 4617-2014 Ester resin catalyst
- HG/T 4554-2013 Test Method of Activity for High Temperature Carbon Monoxide Shift Catalysts in High Pressure
- HG/T 4347-2012 Naphtha steam reforming catalysts
- HG/T 4863-2015 High palladium catalyst for ammonia oxidation in nitric acid production
Military Standard of the People's Republic of China-General Armament Department
- GJB 7402-2011 Specification for high loading iridium catalyst of aircraft
- GJB 1960-1994 Catalyst-814 and Catalyst-816 Specifications
- GJB 9874-2020 Specification for gel propellant decomposition catalysts
- GJB 1960A-2019 Catalyst-814 and Catalyst-816 Specifications
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 41499-2022 Waste catalyzer—Classification
- GB/T 37352-2019 Marine selective catalytic reduction(SCR)cellular-type denitrification catalysts
- GB/T 39718-2020 High mass flux catalyst for hydrogen peroxide decomposition
- GB/T 38602-2020 Test method of catalytic activity for catalytic wet oxidation of organic wastewater
国家能源局
- SH/T 0952-2017 Determination method of microreactivity index of catalytic cracking catalyst
- SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts by laser scattering method
- SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalysts
- SH/T 0960-2017 Sampling method for catalytic cracking catalysts, auxiliaries and adsorbents
- SH/T 0953-2017 Determination of loss on ignition of catalytic cracking catalyst
- SH/T 0961-2017 Determination of alumina content in catalytic cracking catalyst EDTA volumetric method
- SH/T 0964-2017 Determination of catalytic cracking catalyst wear index straight tube method
- SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping
- SH/T 0955-2017 Water droplet method for determination of pore volume of catalytic cracking catalysts
- SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts by flame photometry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 34248-2017 Performance test method of three-way catalyst
- GB/T 23592-2017 Catalysts for motorcycle exhaust purification
- GB/T 34700-2017 Rare earth type selective catalytic reduction (SCR) denitration catalysts
- GB/T 35960-2018 Catalysts titanium oxide type for sulfur recovery
Yunnan Provincial Standard of the People's Republic of China
- DB53/T 852-2017 Technical specification for fire recovery of palladium catalyst with carbon carrier failure
Jilin Provincial Standard of the People's Republic of China
- DB22/T 2660-2017 Test of Catalytic Activity of PDS Desulfurization Catalyst
Hebei Provincial Standard of the People's Republic of China
- DB13/T 5511-2022 Coal Catalytic Gasification Catalyst Recovery Process Technical Regulations
- DB13/T 5528-2022 Technical specification for catalytic coal gasification without recovery catalyst
未注明发布机构
- ASTM RR-D32-1039 2002 D6761-Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM RR-D32-1040 2004 D7084-Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM RR-D32-1003 1982 D4058-Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM RR-D32-1024 1988 D4179-Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
Professional Standard - Energy
- NB/SH/T 6075-2023 Dynamic Image Method for Determination of Catalyst Morphology in Catalytic Cracking
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 27870-2011 Photocatalyst for air purification
- GB/T 18881-2002 Catalyst for petrol vehicle exhaust purification
- GB/T 31587-2015(英文版) Honeycomb type DeNO x catalysts
- GB/T 31584-2015(英文版) Plate type DeNO x catalysts
- GB/T 29914-2013 Oxidation Catalyst for Diesel Vehicle Exhaust Purification
- GB/T 23592-2009 Catalyst for motorcycle exhaust purification
- GB/T 20370-2006 Biocatalyst Guideline for enzyme preparation nomenclature
Professional Standard - Petrochemical Industry
- SH/T 0666-1998 Petroleum Refining Catalyst Classification
Professional Standard - Rare Earth
- XB/T 506-2007 Oxidation catalyst for diesel vehicle exhaust purification
Anhui Provincial Standard of the People's Republic of China
- DB34/T 1442-2011 FD hydrodesulfurization catalyst
PL-PKN
- PN C83030-1971 Accelerators for vulcanization Accelerator D
HU-MSZT
- MSZ 3652-1979 catalyst
- MNOSZ 19812-1953 Methyl formate nickel catalyst
GSO
- NB/SH/T 0960-2017 Sampling method for catalytic cracking catalysts, promoters and adsorbents
- NB/SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalyst
- NB/SH/T 0955-2017 Determination of pore volume of catalytic cracking catalysts - Water drop method
- NB/SH/T 0953-2017 Determination of ignition loss of catalytic cracking catalyst
- NB/SH/T 0952-2017 Determination of the micro-reaction index of catalytic cracking catalyst
- NB/SH/T 0964-2017 Determination of the attrition index of catalytic cracking catalysts - Straight tube method
- NB/SH/T 0961-2017 Determination of alumina content in catalytic cracking catalysts - EDTA volumetric method
- NB/SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts - Laser scattering method
- NB/SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts - Flame photometry
- NB/SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst supports by mechanical tapping
- NB/SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts - Static nitrogen adsorption capacity method
GM North America
- GM 9986017-1993 Bismuth Catalyst
- GM 9986018-1993 Tertiary Amine Catalyst
- GM 9986015-1993 Dibutyl Tin Dilaurate Catalyst
- GM 9986016-1993 Dimethyl Tin Dilaurate Catalyst
- GM 9986019-1993 SRIM, Organotin Catalyst
General Motors Corporation (GM)
- GM 9982231-1996 Adhesive, Promoter
- GM 9982249-2002 Adhesive Promoter
- GM 9981810-1993 Adhesive, Promoter, RTV to Chrome Revision A
- GM 9984457-1992 Catalyst, EOLR for Basecoats
- GM 9985988-1994 Adhesive, Prepromoter, (Laquer Thinner)
American Society for Testing and Materials (ASTM)
- ASTM D3766-86(2007) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3766-86(2002) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM UOP333-07 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- ASTM D3766-08 Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3766-08(2013) Standard Terminology Relating to Catalysts and Catalysis
- ASTM UOP333-10 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- ASTM D3766-24a Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3766-86(1997) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D4058-96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM D6761-02 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM UOP896-93 Platinum in Spent Catalyst
- ASTM D3766-08(2018) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D6761-17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM UOP954-03 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
- ASTM D6761-07(2012) Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM D7084-23 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM D6761-07 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D5153-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
- ASTM UOP602-12 Soxhlet Extraction of Catalyst
- ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D6761-04 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM UOP954-11 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
- ASTM D4179-11 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D7206/D7206M-06(2013)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM D4164-03 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D7206/D7206M-06(2012)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM D7084-04 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM D6175-03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM UOP602-89 Soxhlet Extraction of Catalyst
- ASTM UOP410-14 Sodium in Catalysts by AAS
- ASTM D7084-04(2009) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM UOP815-87 Acid Insolubles in Catalysts
- ASTM UOP254-14 Apparent Bulk Density of Fluid Cracking Catalyst
- ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM D6761-04a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
Korean Agency for Technology and Standards (KATS)
- KS L 1622-2006 Glossary of terms used in photocatalysts
- KS L 1622-2006(2021) Glossary of terms used in photocatalysts
- KS L 1622-2022 Glossary of terms used in photocatalysts
- KS L 1622-2006(2016) Glossary of terms used in photocatalysts
Universal Oil Products Company (UOP)
- UOP 333-2010 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- UOP 602-2015 Soxhlet Extraction of Catalyst
- UOP 954-2011 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
- UOP 410-2014 Sodium in Catalysts by AAS
Institute of Interconnecting and Packaging Electronic Circuits (IPC)
- IPC MI-660 11.3-1984 Palladium Catalyst Analysis
GM Europe
- GME4667-2004 脺berpr眉fung der Haftf盲higkeit von Beschichtungen im Katalysator Test of Coating Adherence in Catalytic Converters English/German; Includes Appendix A
- GME L 000 0953-2003 Ordinary topcoat catalyst (Germany)
Institute of Electrical and Electronics Engineers (IEEE)
- The IEEE Global Initiative on Ethics of Extended Reality (XR) Report--Extended Reality (XR) Ethics i The IEEE Global Initiative on Ethics of Extended Reality (XR) Report--Extended Reality (XR) Ethics in Education
SCC
- HOLDEN HN 2009-2013 Sealant - Two Part Silicone - Catalyst
- HOLDEN HN 2009-1997 Sealant - Two Part Silicone - Catalyst
- HOLDEN HN 1958-2009 SEALANT – TWO PART SILICONE - CATALYST
United States Navy
- NAVY QPL-23586-2011 SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL
RU-GOST R
- GOST 3193-1974 Platinum alloy catalytic gauzes. Specifications
catalyst,efficient tdo,Efficient topdressing,Efficient,efficient decomposition,Efficient skin care,Efficient leak detection,efficient,Efficient catalyst,efficient and reliable,efficient grinding,Efficient desulfurization catalyst,Efficient spectrum catalyst,Production of high-efficiency catalysts,HPUHP,Efficient and sub-efficient,New high-efficiency catalyst,"catalyst,Efficient Catalyst Components,Efficient noble metal catalyst