acceleration condition

acceleration condition, Total:474 items.

The international standard classification for "acceleration condition" includes: Other machine tools , Rolling bearings , Iron and steel forgings , Drilling machines , Wind turbine systems and other alternative sources of energy , Reproduction equipment , Special purpose vehicles , Burners. Boilers , Measurement of fluid flow in general , Measurement of volume, mass, density, viscosity , Agricultural machines, implements and equipment , Moulding equipment , Manufacturing forming processes , Numerically controlled machines , Surface treatment , Gears , Forging equipment. Presses. Shears , Internal combustion engines , Electrochemical machines , Machining centres , Shipbuilding and marine structures in general , Rails and railway components , Turning tools , Boring and milling machines , Hydraulic energy engineering , Agricultural tractors and trailed vehicles , Milling tools , Road engineering in general , Other cutting tools , Paints and varnishes , Iron and steel castings , Processes of the textile industry , Corrosion of metals , Buildings and installations for processing and storage of agricultural produce , Meat and meat products , Steel bars and rods , Generators , Aerospace electric equipment and systems , Taps and threading dies , Materials and components for shipbuilding , Marine engines and propulsion systems , Electric road vehicles , Transport by rail , Railway rolling stock , Road vehicles in general , Railway engineering in general , Materials and components for railway engineering , Equipment for the chemical industry , Geology. Meteorology. Hydrology , Road transport , Transport by water , Plants and equipment for the food industry , Equipment for the metallurgical industry , Glass , Power transmission and distribution lines .

The Chinese standard classification for "acceleration condition" includes: Acoustic instrument and seismograph , Machine tool in general , Non-traditional processing machine tool , Rolling bearing , Forging and pressing , Drilling, boring and milling machine , Gear and thread cutting machine , Wind energy , Micro and copier machinery , Technological equipment in general , Farm, livestock, by-product and fish vehicles , Boiler and its auxiliary equipment , Steam turbine and its auxiliary equipment , Flow capacity and material level instrument , Nonmetal material testing machine , Agricultural products and feed processing machinery , Transmission system , Casting equipment , Hydraulic and pneumatic device , Rolling equipment , Lathe , Material Protection , Metallurgical machinery in general , Coupling, brake and speed variator , Metal forming machinery , Machine tool assistive device and accessory , Micro machine , Architectural engineering construction machinery , Piston type internal combustion engine and other power equipment in general , Papermaking in general , Shafting equipment , Railway components , Cutting tools , Water turbine and its auxiliary equipment , Highway protection and maintenance , Coating , Casting , Technology , Metal chemical property test method , Meat processing and products , Technical management , Profile steel and deformed steel , Electronic components , Non-traditional processing technology , Ambient conditions , Spacecraft control and guidance system , Vessel materials and their inspection methods , Marine internal-combustion engine , Technical management , Technical Management , Technical management , Technical management , Technical management , Basic standards and general methods , Railway passenger coaches , Other special automobiles , Hygiene, safety and labor protection , Humping equipment , Braking system , Mechanical quantity instrument, automatic weighing equipment and other measuring instrument , Locomotive repair technology and equipment , Blocking systems and axle counters , Railway communication network , Chemical machinery , Special chemical instrument and meter , Light industry machinery in general , Welding and cutting , Meteorology , Highway transportation in general , Ship navigation safety and transmission safety standards , Grain and oil/fat processing machinery , Other power equipment , Building glass , Power station equipment automation devices , Relay protection and automatic device , Hygiene, safety and labor protection .

Professional Standard - Machinery

JB/T 6098-2006 Electrolytic machine tools-General technical requirements
JB/T 9050.1-1999 General Technical Requirement of Reduction Cylindrical Gear Units
JB/T 13587.2-2019 High-speed five-axes gantry-type machining centers with fixed cross rail-Part 2:Specifications
JB/T 11553-2013 Package of adding magnesium with pressure - Technical requirements
JB/T 6582-1993 Automatic Cold Heaters for High Speed Steel Ball Technical Conditions
JB/T 5689-1991 Technical specifications for complete equipment for roast chicken processing
JB/T 13514-2018 Hydraulic cylinder for self-unloading low-speed vehicles-Technical requirements
JB/T 7057-1993 Specifications for adjustable-speed pneumatic pipe joints
JB/T 10453-2004 Stencil duplicator(Mimeograph)Technical Condition
JB/T 8127.2-1995 Technical specifications for fuel fired heaters
JB/T 8490.2-1996 Technical conditions for CNC floor milling and boring machines and floor milling and boring machining centers
JB/T 3343-1993 High pressure heater manufacturing technical conditions
JB/T 13591.2-2019 Horizontal machining center with symmetrically-placed double columns -Part 2: Specifications
JB/T 5113-1991 Intermittent sprayer technical conditions
JB/T 8801-2017 Machining centres. Specifications
JB/T 505-1993 Technical conditions of batch sand mixer
JB/T 5687-1991 Small and Medium Size Potato Starch Processing Complete Plant - Technical Specification
JB/T 5936-1991 Engineering Machinery General Technical Specifications for Mechanical Processed Parts
JB/T 5456-2005 Specifications for the melt flow ratemeters
JB/T 7047-2006 Rolling bearings - Specifications of vibration (acceleration) for deep groove ball bearings
JB/T 8648.2-2008 drilling machining centres-part 2:specifications
JB/T 11470-2013 Low-speed Vehicles Exhaust Silencers - Technical Specification
JB/T 5516-1991 Accelerator Calibration Instrument - Specification
JB/T 7308-1994 Engineering machinery tanker technical conditions
JB/T 9751-2013 Diesel engines - Hydraulic speed governors - Specifications
JB/T 10237-2001 Rolling bearings - Specifications of vibration（acceleration） for tapered roller bearings
JB/T 10801.2-2007 High-frequency spindle - Part 2: Specifications for high-frequency spindle used in machining centres
JB/T 7508-1994 Bright Nickel Plating Additive Specifications
JB/T 10792.2-2007 The 5-axes simultaneous vertical machining centers - Part 1: Specifications
JB/T 10237-2014 Rolling bearings -- Specifications of vibration (acceleration) for tapered roller bearings
JB/T 8772.2-1998 Test conditions of precision machining centres. Part 2: Geometric tests of vertical machining centres
JB/T 13589.3-2019 Portal-type machining centres-Part 3:Specifications
JB/T 8772.7-1998 Test conditions of precision machining centres. Part 7: Accuracy of a finished test piece
JB/T 8190-1999 Specifications for High Pressure Feedwater Heaters
JB/T 13581.2-2019 High-speed vertical machining centres-Part 2:Specifications
JB/T 10330.1-2002 High speed small hole drilling electro-discharge machines Part 1:Techenical requirements
JB/T 10168-2000 High speed precision straight side press - Technical requirements
JB/T 4290-2011 Technical requirements for forgings of high-speed steel
JB/T 12056-2014 Technical Conditions for Stretch-reducing Mill Gearbox
JB 5113-1991 Intermittent sprayer technical conditions
JB/T 6577-2011 Ladle drier-Technical requirements
JB/T 8801-1998 Machining centres -- Specifications
JB/T 5965-2010 Technical conditions of sintered high - Speed steel products
JB/T 9450-1999 Specification for electrical contactor wind speed and wind direction recorder
JB/T 4290-1999 Technical requirments for forgings of high-speed steel
JB/T 10339-2002 Technical conditions of addition agent for bright zinc plating
JB/T 9740.3-1999 Technical specifications for low speed wind energy conversion system
JB/T 7224-1994 Technical conditions of air inlet heating unit
JB/T 7057-2008 Rules relating of speed adjusting pneumatic fluid power tube fieetings
JB/T 9450-2015 Contact anemograph. specifications
JB/T 6761-1993 General Technical Specifications for Pulse Tachogenerators
JB/T 5456-1991 Melt flow rate instrument technical conditions
JB/T 8350.2-1996 Cupola furnace feeding machine. Technical conditions
JB/T 5153.2-1991 Specifications for plate and frame pressurized oil filter
JB/T 11041-2010 Single - Track hoist for cupola - Technical requirements
JB/T 7314-1994 Technical conditions of compound feed processing unit
JB/T 6761-2016 General specification for pulse tachogenerator
JB/T 11547-2013 Electric furnace vibrating feeder — Technical requirements
JB/T 10168-2015 High speed precision straight side press— Technical requirements
JB/T 6606-1993 Technical conditions of high-speed gear shaping machine
JB/T 5936-2018 Construction machinery-General technical specifications for machining parts
JB/T 13591.2-2020 Two-column symmetrical horizontal machining center Part 2: Technical conditions
JB/T 13582.2-2019 High-speed horizontal machining centres-Part 2:Specifications
JB/T 8648.2-1997 Technical conditions of drilling machining center
JB/T 8190-2017 High pressure feedwater heaters-Specifications
JB/T 7047-1999 Rolling bearings - Specification of vibration（acceleration）for deep groove ball bearings
JB/T 9751-1999 Diesel engines - Hydraulic speed governors - Specifications
JB/T 10513-2005 Low-speed goods vehicles - Technical requirements for front axle
JB/T 8771.7-1998 Test conditions of machining centres.Part 7:Accuracy of finished test piece
JB/T 8773-1998 Precision machining centres. Specifications
JB/T 8561-1997 Specifications for Acceleration Vibration Meters for Rolling Bearings
JB/T 10330-2012 Small hole high speed drilling electro-discharge machines —Technical requirements
JB/T 8923-1999 Rolling bearings. Specifications of vibration (acceleration)for steel balls
JB/T 8828-2001 Common specification for cutting
JB 5179-1991 Tractor transmission fork technical conditions
JB/T 12209-2015 High-powered medium-speed diesel engines-Nodular cast iron crankshafts-Specification
JB/T 13893-2020 Middle speed semi-straight side press-Technical requirements
JB/T 9922.3-1999 Technical conditions of center hole grinder
JB/T 10889.2-2008 Turning-milling machining centers with a horizontal workholding spindle-Part 2:Specifications
JB/T 11472-2013 Low-speed Vehicles Electrical Equipments - Technical Specification
JB/T 13931.3-2020 Combined machine center of woodworking- Part 3: Technology conditions
JB/T 13301-2017 Specification for permanent magnet eddy current motor governers
JB/T 10793.3-2017 High precision maching centers-Part:3 Specifications
JB/T 5179-2000 Tractor shifting fork requirements
JB/T 11082-2011 Internal combustion engines — Surface finishing for parts— Specifications
JB/T 5000.9-1998 The heavy mechanical general techniques and STANDARDs Cutting
JB/T 6098-1992 General technical requirements for electrolytic machining machine tools
JB/T 7508-2005 Technical conditions of addition agent for bright nickel plating
JB/T 14172-2021 Sand valve for V-process - Technical requirements
JB/T 8742-2014 Mining Electric Locomotive Reduction Box - Technical Conditions
JB/T 8742-1998 Specifications of gear box for mining and industrial electric locomotive
JB/T 6606-2006 Specifications for high speed gear shaping machines
JB/T 6052-2005 General specifications for heating up of steel free forgings
JB/T 8771.2-1998 Test conditions of machining centres-Part 2: Geometric tests for machines with vertical spindle
JB/T 8923-2010 Rolling bearings-Specifications for vibration (acceleration) of steel balls
JB/T 11569.2-2013 The 5-axes simultaneous carving machining centers - Part 2: technical specifications
JB/T 10393-2002 Specification for electric boilers
JB/T 5965-1991 Technical conditions for sintered high-speed steel products

Professional Standard - Petroleum

SY 5262-1991 Fire barrel heating furnace technical conditions
SY/T 0524-1993 Technical conditions for heat medium indirect heating device
SY/T 0538-1994 Technical conditions of tubular heating furnace

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24944-2010 Low-speed goods vehicles—General specifications
GB/T 18400.6-2001 Test conditions for machining centres--Part 6:Accuracy of feeds,speeds,speeds and interpolations
GB/T 17116.3-2018(英文版) Pipe supports and hangers—Part 3:Middle connection attachments and building structure attachments
GB/T 40278-2021 Paper and board—Accelerated ageing (exposure to light)
GB/T 9652.1-2019 Specification of hydraulic turbine governing systems
GB/T 32256-2015 Steel forgings for rings for reduction gears―General specification
GB/T 32333-2015 Rolling Bearings - Measuring Methods and Specifications for Vibration (Acceleration)
GB/T 9941-1988 High speed tool steel sheets and plates--Technical requirements
GB/T 37400.9-2019(英文版) Heavy mechanical general technical specification—Part 9: Machining parts
GB/T 18400.7-2010 Test conditions for machining centres—Part 7:Accuracy of a finished test piece
GB/T 18400.10-2021 Test conditions for machining centres—Part 10：Evaluation of thermal distortions
GB/T 18226-2000 Specification for steel components anticorrosion of highway traffic engineering appurtenances
GB/T 45489-2025 General technical specification of the track panel for mediun and low speed maglev
GB/T 9943-1988 High speed tool steel bars--Technical requirements
GB/T 3180-1982 Specification for medium manganese wear-resistant spheroidal iron castings
GB 18568-2001 Machining centres--Safequarding specification
GB 6747-1986 General specification of shop primers for ship building
GB/T 21012-2007 Precision machining centers—Specifications
GB/T 34880.3-2025 Test conditions for 5-axis simultaneous machining centers—Part 3:Specifications
GB/T 35078-2018 High speed precision hot upsetting forgings--General specification
GB/T 18400.7-2010/ISO 10791 7:1998 Machining Center Inspection Conditions Part 7: Precision Inspection of Finished Test Pieces
GB/T 34880.3-2018 Inspection condition for 5-axis simultaneous machining center--Part 3: Specifications
GB/T 17237-1998 The general technical conditions for animal slaughtering
GB/T 40166-2021 Paper and board—Accelerated ageing(exposure to nitrogen dioxide)
GB 3475-1983 Speed governing of marine diesel engines specifications
GB/T 18353-2008 Basic technical condition of cotton processing enterprise
GB/T 24651-2009 Specifications—Tractor shifting forks
GB/T 20957.7-2007 Test conditions for precision machining centres—Part 7: Accuracy of a finished test piece
GB/T 20853-2007 Corrosion of metals and alloys—Corrosion in artificial atmosphere—Accelerated corrosion test involving exposure controlled conditions of humidity cycling and intermittent spraying of a salt solution
GB/T 18400.9-2007 Test conditions for machining centres—Part 9:Evaluation of the operating times of tool change and pallet change
GB/T 25671-2010 High speed steels metal cutting tools with hard coating - Technical specifications
GB/T 14328.4-1993 Roughing end mills technical specifications
GB/T 10098-1988 The specification of marine gearbox for medium speed diesel engine
GB/T 4211.2-2004 High speed steel tool bits - Part 2:Technical requirements
GB/T 6747-1986 General specification of shop primers for ship building
GB/T 4997-1993 Permanent magnet low speed direct current tachogenerator, General specification for
GB/T 3475-1983 Speed governing of marine diesel engines--Specifications
GB/T 17237-2008 General qualification of technology on livestock animal slaughtering process
GB/T 33975-2017 Hot-rolled spring steel wire rod for high-speed railway fastener

Professional Standard - Aerospace

QJ 2758-1995 Screw Tap for Machining High Strength Steel - Techinical Conditions
QJ 2297-1992 General Technical Specifications for Liquid Oxygen Filling Vehicles
QJ 2842-1996 General Technical Specifications for Electrolytic Machining
QJ 1503-1988 General Technical Specification for Air Flow Relay
QJ 338-1978 Composite Center Drill Technical Conditions
QJ 2162-1991 General specifications for spring accelerometers
QJ 2211-1991 Technical conditions of taps for processing stainless steel
QJ 1006-1986 General technical conditions for rate gyroscopes
QJ 1929-1990 General technical specifications for hydrostatic gyro accelerometers
QJ 2500-1993 General technical conditions for rotary quick lock
QJ 1928-1990 General specification for liquid floating pendulum accelerometer

Professional Standard - Aviation

HB 5820-1982 Specifications for Aircraft Pressure Refueling Connectors
HBm 84-1989 Specifications for motorcycle engine transmission
HBm 66.14-1988 Technical Specification for Main Reducing Gear and Differential Gear of Minitruck
HB 5830.4-1982 Environmental Conditions and Test Methods for Airborne Equipment - Constant Acceleration
HBm 65.14-1988 Mini-truck - Technical Specification for Main Reducing Gear and Differential
HB 6167.16-1988 Environmental conditions and test methods for airborne equipment of civil aircraft Acceleration
HB 5943-1986 General Technical Specification for Rate Gyroscopes
HB 7130-1995 General Technical Specification for Cutting Processing
HBm 66.52-1990 Mini-truck - Technical Specification for Speedometer
HB 6156-1988 General Technical Specification for Conventional Linear Accelerometer

Professional Standard-Ships

CB/T 4313-2013 Specification of solid crankshaft forgings for median speed diesel engine
CB/T 3406-1991 Technical Specifications for Forged Steel Crankshaft of Marine Medium-speed Diesel Engines
CB/T 4198-2011 Technical specification of marine medium speed diesel gearbox
CB/T 1186-1998 Specification of solid crankshaft forgings for median speed diesel engine
CB/T 3790-1997 Rules for marine pipes processing technology

Professional Standard - Electron

SJ 1457-1979 General specification for general purpose low and medium speed electronic counters
SJ 347-1973 Generic specification for reflex klystrons
SJ 1705-1981 Measurement conditions of power klystrons
SJ 362-1973 Measurement conditions for reflex klystrons
SJ 2456-1984 Generic specification for electronic time relays
SJ 2459-1984 Specification for cycloid pin gear speed reducers
SJ 1704-1981 Generic specification for power klystrons
SJ 2936-1988 Specification for medium powers wattmeters
SJ 20115.8-1992 Environmental conditions and test methods for aircraft radar-Constant acceleration test

Hunan Provincial Standard of the People's Republic of China

DB43/T 2310-2022 Technical conditions of inspection vehicles for medium and low speed maglev lines

Group Standards of the People's Republic of China

T/TZZL 1-2018 Technical specification for vertical machining center assembly-Geometric accuracy
T/JAR 008/1-2023 Specification for ultra-rapid thermal shock testing machine
T/TBPS 1001-2016 Technical specifications for Micro low-speed electric vehicles
T/CET 501-2021 AC fast vacuum circuit breaker technical conditions
T/CEC 351-2020 10kV flexible cable quick connector technical conditions
T/GDMES 0002.3-2019 Combined machine center of woodworking — Part 3: Technology conditions
T/TZZL 3-2019 Text conditions for machining center Accuracy test of three axis machining precision specimen
T/HEBQIA 371-2025 Technical requirements for motor-driven transmissions
T/TZZL 4-2019 Text conditions for machining center Heavy Cutting Test
T/CAMET 08003-2018 Medium and low speed maglev transit —Levitation bogie—General technical specification
T/TCMCA 0016-2021 Technical specification for Light High-Speed Marine Gearbox
T/JSSAE 006-2025 Technical Conditions for Low-speed Electric Vehicle Corner Module

Professional Standard - Urban Construction

CJ/T 458-2014 Technical specification of system for the levitation control of medium-low speed maglev transportation vehicle
CJ/T 413-2012 Technical specification for low and medium speed maglev train transport rail row
CJ/T 412-2012 Technical specification for medium and low speed maglev turnout
CJ/T 411-2012 Technical specification for the electrical system of medium and low speed maglev vehicle
CJ/T 375-2011 General technical specification for medium and low speed maglev vehicles

Professional Standard - Automobile

QC/T 843-2011 General specifications for limousine
QC/T 816-2009 Specification of mobile hydrogen refueling vehicles
QC/T 653-2000 Technical conditions for fuel tanker and refueller

Professional Standard - Railway

TB/T 3301-2013 Technical Specification for Turnout of High Speed Railway
TB/T 3283-2015 Technical conditions for railway time synchronization network
TB/T 3439-2016 Technical specification of train control center
TB/T 2625-1995 General Technical Specification for Train Velometer
TB/T 3395.1-2015 Fastening systems for high-speed railway Part 1:General requirement
TB/T 3542-2018 Technical specification for manufacturing of high speed railway CZ turnouts
TB/T 2169-2002 Telecommunication power supply series and main technical conditions for intermediate railway station
TB/T 2667-1995 Technical Conditions for Overspeed Protection of Train
TB/T 1805-1986 General technical requirements for refrigerated trucks with ice
TB/T 2845-1997 General technical conditions for vehicle reducers
TB/T 2668-2004 Specification for railway automatic station block
TB/T 2460-1993 General technical conditions of retarder
TB/T 3395.3-2015 Fastening systems for high-speed railway Part 3:Type V fastening system
TB/T 2845-2007 Technical requirements for car retarder
TB/T 2794-1997 Technical conditions of overspeed parking device test bench
TB/T 2574-1995 Technical conditions for fast nickel brush plating solution
TB/T 2773-1997 Technical conditions for the supply of top coats and intermediate coats for railway steel bridges
TB/T 3209-2008 Technical regulations for hollow bolt
TB/T 2972-1999 Technical Specifications for Speed Measuring Radar with Hump Millimeter Wave
TB/T 3531-2018 Technical specification for temporary speed restriction server
TB/T 3395.2-2015 Fastening systems for high-speed railway Part 2:Type Ⅳfastening system

Professional Standard - Chemical Industry

HG/T 3122-1998 Specification of the drum tester for tyres endurance or high speed test
HG/T 2068-1991 Technical conditions of rapid plasticity meter for rubber
HG/T 2068-2009 Technical specifications for rubber rapid plastimeters
HG/T 3913-2006 Specification for high speed centrifugal pump

Professional Standard - Light Industry

QB/T 5250-2018 Lether-Tests for colour fastness-Change in colour with accelerated ageing
QB 1183-1991 GC15 high-speed sewing machine frame technical conditions
QB/T 1588.2-1992 Light Industry Machinery General Technical Conditions for Cutting Workpieces
QB/T 3745-1999 Specifications for inset runway centerline lights
QB/T 1588.2-2015 Light industry machinery―General specification for cutting
QB/T 1183-1991 Technical Specification for Teeth Lifting Frame of GC15 High Speed Parallel Sewing Machine

Professional Standard - Meteorology

QX/T 323-2016 Meteorological low-speed wind tunnel technical conditions
QX/T 111-2010 Grade of weather conditions for freeway transportation

Professional Standard - Traffic

JT 432-2000 Specification for light-emitting diode changeable speed limit signs of expressway
JT/T 108-1991 Technical requirements for automobile transmission being overhauled
JT 394-1999 Specification for safe navigation for river high speed passenger ship

Anhui Provincial Standard of the People's Republic of China

DB34/T 2314-2015 Inspection Conditions and Evaluation of Thermal Deformation of CNC Machining Center

Military Standard of the People's Republic of China-General Armament Department

GJB 576-1988 General technical conditions for filling vehicles
GJB 61-1985 Aircraft pressure refueling joint technical conditions

Professional Standard - Energy

NB/T 10936-2022 Specification for electric heating boilers
NB/T 10810-2021 Specifications for governing system of small hydropower units

Professional Standard - Agriculture

SB/T 10242-1995 General technical conditions for high-speed barnyard removal sieve
SB/T 10148.6-1993 General technical conditions for grain and oil processing machinery Welding parts
SB/T 10148.4-1993 General technical requirements for castings of grain and oil processing machinery
LS 39-1982 General technical requirements for grain and oil processing machinery Wooden parts
LS 38-1982 General technical conditions for grain and oil processing machinery Welding parts
LS 34-1982 General technical requirements for castings of grain and oil processing machinery
SB/T 10148.7-1993 General technical requirements for grain and oil processing machinery Wooden parts

Taiwan Provincial Standard of the People's Republic of China

CNS 15077-7-2007 Test conditions for machining centers - Part 7 : Accuracy of finished test piece

Professional Standard - Education

JY 235-1987 Technical conditions for plasmodesmata sectioning

Professional Standard - Grain

LS/T 3501.7-1993 General Technical Specifications for Cereals and Oilseeds Processing Machinery - Wooden Parts
LS/T 3521-1995 General Technical Specifications for High-speed Sieve for Barnyard Millet Removal
LS/T 3501.4-1993 General Technical Specifications for Cereals and Oilseeds Processing Machinery - Casting
LS/T 3501.6-1993 General Technical Specifications for Cereals and Oilseeds Processing Machinery - Welding Parts

Professional Standard - Ferrous Metallurgy

YB/T 4063-1991 Technical conditions of heating furnace hot slide rail
YB 4063-1991 Specification for hot slideway of heating furnace
YB/T 018-92 Technical conditions of walking beam heating furnace
YB/T 018-2017 Technical specifications of walking-beam heating furnace
YB/T 018-1992 Specification for walking beam heating furnace
YB/T 4062-1991 Chain heating furnace claw technical conditions

Professional Standard - Building Materials

JC/T 2452-2018 Spacer for insulating glass units. Part 2: Stainless steel spacer
JC/T 2453-2018 Spacer for insulating glass unit. Part 3: Warm edge spacer
JC/T 2069-2011 Specer for insulating glass units Part 1:Aluminum spacer

Professional Standard - Military and Civilian Products

WJ 1381-1983 Technical conditions of ball mold and flat mold for cold processing of optical parts
WJ 1682-1986 SSY-1A Digital Velocimeter Specifications

Professional Standard - Energy and Power Planning

DL/T 339-2010 Specification for low voltage speed control device with variable frequency
DL/T 1298-2009 Spacer technical conditions and test methods
DL/T 1859-2018 Specifications of speed monitoring device for hydropower plants
DL/T 1098-2016 Requirements and tests for overhead line spacers
DL/T 1098-2009 Requirements and tests for overhead line spacers

Professional Standard - Public Safety Standards

GA 297-2001 General specification for speed detector of motor vehicles

Professional Standard - Hydroelectric Power

SD 285-1988 Technical Specifications for Static Time Relay

Guangxi Provincial Standard of the People's Republic of China

DB45/T 2549-2022 Technical conditions of sugarcane leaf stripper

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1348-2011 Tea processing site and equipment conditions

Professional Standard - Tobacco

YC/T 10.1-1993 Tobacco Machinery General Technical Conditions Machining Parts

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1922-2016 Technical conditions of CNC high-speed printed board drilling machine

Chongqing Provincial Standard of the People's Republic of China

DB50/ 145-2003 General Technical Conditions for Stamped Sealed Vehicles

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 479-2004 Basic technical qualification of tea processing ground

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2577-2016 Technical conditions for LED lighting in highway tunnels

British Standards Institution (BSI)

BS ISO 10791-6:2014 Test conditions for machining centres. Accuracy of speeds and interpolations
BS ISO 10791-6:1998 Test conditions for machining centres - Accuracy of feeds, speeds and interpolations
BS ISO 10791-7:2020 Test conditions for machining centres - Accuracy of finished test pieces
BS ISO 10791-7:2014 Test conditions for machining centres. Accuracy of finished test pieces
BS ISO 10791-7:1998 Test conditions for machining centres - Accuracy of a finished test piece
BS EN ISO 16151:2008 Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
BS ISO 10791-10:2022 Test conditions for machining centres. Evaluation of thermal distortions
12/30205788 DC BS ISO 10791-6. Test conditions for machining centres. Part 6. Accuracy of speeds and interpolations
BS ISO 10791-9:2001 Test conditions for machining centres - Evaluation of the operating times of tool change and pallet change
BS ISO 10791-10:2007 Test conditions for machining centres - Evaluation of thermal distortions
BS ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres - Accuracy of a finished test piece
BS ISO 16151:2006 Corrosion of metals and alloys - Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions
18/30361451 DC BS ISO 10791-7. Test conditions for machining centres. Part 7. Accuracy of finished test piece
BS EN 60721-2-3:2014 Classification of environmental conditions. Environmental conditions appearing in nature. Air pressure
BS ISO 10791-8:2001 Test conditions for machining centres - Evaluation of contouring performance in the three coordinate planes
12/30210533 DC BS ISO 10791-7. Test conditions for machining centres. Part 7. Accuracy of a finished test piece
BS EN IEC 60721-2-2:2024 Classification of environmental conditions - Environmental conditions appearing in nature. Precipitation and wind

Japanese Industrial Standards Committee (JISC)

JIS S 2071:2008 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater
JIS S 2073:2009 Standard use conditions, standard acceleration mode and test conditions for domestic direct vent type oil burning space heater
JIS S 2074:2011 Standard use conditions, standard acceleration mode and test conditions for domestic gas combination water heating and hydronic heating appliance
JIS S 2072:2009 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater for bathtub
JIS B 9201:1984 Parts for noodle making machines

Association Francaise de Normalisation

NF ISO 10791-6:2015 Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations
NF ISO 10791-7:2020 Test conditions for machining centres - Part 7: Accuracy of machined test pieces
NF E60-172-6*NF ISO 10791-6:2015 Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations
NF E60-172-7*NF ISO 10791-7:2020 Test conditions for machining centres - Part 7 : accuracy of finished test pieces
NF E60-172-10*NF ISO 10791-10:2022 Test conditions for machining centres - Part 10 : evaluation of thermal distortions
NF ISO 10791-10:2022 Test conditions for machining centres - Part 10: Evaluation of thermal deformations
NF ISO 10791-9:2001 Test conditions for machining centers - Part 9: evaluation of tool changing and pallet changing operating times
NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.
NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.
NF ISO 10791-5:1998 Test conditions for machining centers - Part 5: precision and repeatability of positioning of workpiece pallets
NF E60-172-6:1998 Test conditions for machining centres - Part 6 : accuracy of feeds, speeds and interpolations.

International Organization for Standardization (ISO)

ISO 10791-6:2014 Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations
ISO 10791-6:1998 Test conditions of machining centres - Part 6: Accuracy of feeds, speeds and interpolations
ISO 10791-7:2014 Test conditions for machining centres - Part 7: Accuracy of finished test pieces
ISO 10791-7:1998 Test conditions for machining centres - Part 7: Accuracy of a finished test piece
ISO 10791-7:2014/DAmd 1 Test conditions for machining centers — Part 7: Accuracy of machined test parts — Amendment 1
ISO 10791-6:1998/Cor 1:2004 Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations; Technical Corrigendum 1
ISO 10791-7:2020 Test conditions for machining centres — Part 7: Accuracy of finished test pieces
ISO 10791-9 Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
ISO 10791-9:2001 Test conditons for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
ISO 10791-10:2022 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
ISO 5630-5:2008 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 degrees C

Korean Agency for Technology and Standards (KATS)

KS B ISO 10791-6:2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
KS B ISO 10791-6:2021 Test conditions for machining centres —Part 6: Accuracy of speeds and interpolations
KS B ISO 10791-6-2021 Test conditions for machining centres —Part 6: Accuracy of speeds and interpolations
KS B ISO 10791-6-2016(2021) Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
KS B ISO 10791-6-2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
KS B ISO 10791-7:2014 Test conditions for machining centres-Part 7:Accuracy of a finished test piece
KS B ISO 10791-7:2007 Test conditions for machining centres-Part 7:Accuracy of a finished test piece
KS B ISO 10791-7-2016 Test conditions for machining centres — Part 7: Accuracy of a finished test piece
KS B ISO 10791-6:2012 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
KS B ISO 10791-9-2021 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
KS B ISO 10791-9:2016 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
KS B ISO 10791-6:2014 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
KS B ISO 10791-9-2016(2021) Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
KS B ISO 10791-9:2021 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
KS B ISO 10791-9-2016 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
KS B ISO 10791-10-2016 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
KS B ISO 8830-2004(2009) High-speed steel machine taps with ground threads－Technical specifications
KS B ISO 10791-10:2021 Test conditions for machining centres —Part 10: Evaluation of thermal distortions
KS B ISO 10791-10-2021 Test conditions for machining centres —Part 10: Evaluation of thermal distortions
KS B ISO 10791-10:2016 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
KS B ISO 10791-5:2012 Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5:2014 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5:2016 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-10-2016(2021) Test conditions for machining centres — Part 10: Evaluation of thermal distortions
KS M ISO 5630-5:2011 Paper and board-Accelerated ageing-Part 5:Exposure to elevated temperature at 100 ℃
KS B ISO 10791-9:2014 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
KS B ISO 10791-9:2010 Test conditions for machining centres-Part 9:Evaluation of the operating times of tool change and pallet change

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 10791-6:2013 Test conditions for machining centres -- Part 6: Accuracy of feeds, speeds and interpolations
OS GSO ISO 10791-7:2013 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece
OS GSO ISO 10791-10:2013 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
OS GSO ASTM D4798:2016 Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

Gosstandart of Russia

GOST ISO 10791-6-2017 Machining centres. Test conditions. Part 6. Accuracy of speeds and interpolations
GOST 23197-1978 X-ray acceleration cameras. General specifications
GOST ISO 10791-7-2016 Machining centres. Test conditions. Part 7. Accuracy of finished test pieces
GOST 33903-2016 Gasolines. Determination of the stability under accelerated oxidation conditions (induction period)
GOST 21339-1982 Tachometers. General specifications
GOST ISO 13041-5-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 5. Accuracy speeds and interpolations
GOST 20402-1975 Stuffed boiled sausages. Specifications
GOST 1674-1977 Silk twisted threads. Specifications
GOST 23639-1979 Additive KP. Specifications
GOST 26546-1985 Chain variators. General specifications
GOST 23213-1984 Speedometers for locomotives. General specifications
GOST 30222-1995 Cone variable speed drives. General specifications
GOST 9323-1979 Finishing pinion type cutters. Technical conditions
GOST 31311-2022 Heating devices. General specifications
GOST 14333-1979 Rubber working mills. General specifications
GOST 22557-1984 Time relays. General specifications
GOST 17043-1990 Skis. Specifications
GOST 15877-1970 Canned sugar corn. Specifications
GOST 29187-1991 Quick-frozen fruits and berries. General specifications
GOST 10155-1975 Manganin uninsulated wire. Specifications
GOST 23270-1989 Tubes-billets for mechanical treatment. Specifications
GOST 31359-2024 Autoclaved cellular concrete. Technical conditions
GOST 27181-1986 Abrasive cloth and paper for hardworking materials. Specifications
GOST 17440-1993 Snipe nose pliers. Specifications
GOST 27572-1987 Fresh apples for processing. Specifications
GOST 16978-2019 Canned fish in tomato souse. Specifications
GOST 27572-2017 Fresh apples for processing. Specifications
GOST 16978-1999 Canned fish in tomato souse. Specifications
GOST 7737-1989 Plant sheep wool. Specifications
GOST 16978-1989 Canned fish in tomato sauce. Specifications
GOST 25223-1982 Wood-working machines. General specifications
GOST 9972-1974 Petroleum turbine oils with dopes. Specifications
GOST 26334-1984 Electric lifts. Load capacity and speed ranges

German Institute for Standardization

DIN 53714:1978 Accelerated Conditioning of Polyamide (PA) Test Specimens
DIN EN ISO 1110:1998-03 Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995)
DIN 685-100 E:2017-05 Round steel link chains, components and accessories, tested - Part 100: Additional terms
DIN 685-100 E:2020-03 Round steel link chains, components and accessories, tested - Part 100: Additional terms
DIN 685-100:2022 Round steel link chains, components and accessories, tested - Part 100: Additional terms; Text in German and English
DIN 1409:2000 High-speed steel broaching tools - Technical delivery conditions
DIN ISO 10791-7:2001 Machine tools - Test conditions for machining centres - Part 7: Accuracy of a finished test piece (ISO 10791-7:1998)
DIN 1409:2000-07 High-speed steel broaching tools - Technical delivery conditions
DIN ISO 5630-5 E:2016-10 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 °C
DIN 8555-1:1983 Welding surfacing materials; solid wires, filler rods, wire electrodes, etc.; technical delivery conditions

Bureau of Indian Standards

IS 15250-6-2018 Test Conditions for Machining Centres Part 6 Accuracy of Speeds and Interpolations
IS 15250-7-2023 Test Conditions for Machining Centres - Part 7 Accuracy of Finished Test Pieces
IS 5443-1994 High speed steel reamers - Technical supply conditions
IS 15250-9-2018 Test Conditions for Machining Centres Part 9 Evaluation on the Operating Times of Tool Change and Pallet Change
IS 15250-10-2024 Test Conditions for Machining Centres - Part 10 Evaluation of Thermal Distortions
IS 8182-1976 Specifications for hygienic conditions for processed meat products

Spanish Association for Standardization (UNE)

AENOR UNE 53042:1970 Plastic materials. Test methods under accelerated conditions of use.
UNE 15450-6:2000 Machine-tools. Test conditions of machining centres. Part 6: Accuracy of feeds, speeds and interpolations.
AENOR UNE 15450-6:2000 Machine tools. Test conditions of machining centers. Part 6: Precision of feeds, speeds and interpolations.
AENOR UNE 15450-7:2000 Machine tools. Test conditions of machining centers. Part 7: Precision of a machined test piece.
UNE 15450-7:2000 Machine-tools. Test conditions for machining centres. Part 7: Accuracy of a finished test piece.

Magyar Szabványügyi Testület

MNOSZ 159-1956 8 days/short term plus swing general technical conditions

Ente Nazionale Italiano di Unificazione

UNI ISO 10791-6:2010 Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations
UNI ISO 10791-7:2021 Test conditions for machining centres — Part 7: Accuracy of finished test pieces
UNI EN 10277-3:2000 Bright steel products - Technical delivery conditions - Free-cutting steels
UNI EN 10087:2000 Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
UNI EN 29142:1995 Adhesives. Guide to the of standard laboratory ageing conditions for testing bonded joints.
UNI ISO 10791-10:2024 Test conditions for machining centres - Part 10: Evaluation of thermal distortions
UNI ISO 10791-9:2010 Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
UNI EN 14738:2005 Space product assurance - Hazard analysis
UNI EN 1559-3:1999 Founding - Technical conditions of delivery - Additional requirements for iron castings
UNI EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints

BELST

STB 1679-2006 Cultivators for inter-row tillage. Basic technical conditions

GCC Standardization Organization

GSO ISO 10791-6:2013 Test conditions for machining centres -- Part 6: Accuracy of feeds, speeds and interpolations
GSO ISO 10791-7:2013 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece
GSO ISO 10791-9:2013 Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
GSO ISO 10791-10:2013 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
GSO ISO 16701:2013 Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

Swedish Institute for Standards

SS-ISO 10791-7:1998 Test conditions of machining centre - Part 7: Accuracy of a finished test piece
SIS 02 01 21-1968 Atmospheric conditions and time for testing
SS-ISO 10791-9:2001 Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10791-7:2016 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece
BH GSO ISO 10791-9:2016 Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
BH GSO ISO 10791-10:2016 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
BH GSO ASTM D4798:2017 Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

International Telecommunication Union (ITU)

ITU-T U.1-1984 Signalling conditions to be applied in the international telex service
ITU-T V.1-1976 Equivalence between binary notation symbols and the significant conditions of a two-condition code
ITU-T V.1-1980 Equivalence between binary notation symbols and the significant conditions of a two-condition code
ITU-T V.1-1984 Equivalence between binary notation symbols and the significant conditions of a two-condition code

American Society for Testing and Materials (ASTM)

ASTM D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM E151-64(1981) Practice of high temperature tensile test of metal materials under rapid heating conditions
ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM STP 420-1967 Measurement of Dielectric Properties Under Space Conditions
ASTM D4798-04 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

United States Navy

NAVY UFGS-00 73 03-2008 SUPPLEMENTARY CONDITIONS FOR AZORES PROJECTS

American Bureau of Shipping

ABS 61 PART 1 CORR-2016 RULES FOR CONDITIONS OF CLASSIFICATION - HIGH-SPEED CRAFT 2016
ABS 109 PART 1 CORR-2016 RULES FOR CONDITIONS OF CLASSIFICATION – HIGH-SPEED CRAFT 2016
ABS 61 PART 1 CORR-2013 RULES FOR CONDITIONS OF CLASSIFICATION - HIGH-SPEED CRAFT 2013
ABS 61 PART 1 NOTICE 2-2013 RULES FOR CONDITIONS OF CLASSIFICATION - HIGH-SPEED CRAFT 2013
ABS 61 PART 1 NOTICE 3-2013 RULES FOR CONDITIONS OF CLASSIFICATION - HIGH-SPEED CRAFT 2013
ABS 109 NOTICE 1-2012 RULES FOR CONDITIONS OF CLASSIFICATION ?HIGH-SPEED CRAFT 2012

Austrian Standards

ONORM M 9121-1992 Machine tools - Acceptance conditions for machining centres with horizontal spindle
ONORM M 4200-1979 Twist drills of high-speed steel; Technical specifications Forets an acier rapide; specifications techniqu.es

Indonesia Standards

SNI ISO 10791-6:2014 Test conditions for machining centres - Part 6: Cutting speed accuracy and interpolation (ISO 10791-6:2014, IDT)
SNI 4800-2011 Spesifikasi aspal cair tipe penguapan cepat
SNI ISO 10791-7:2014 Test conditions for machining centers – Part 7: Accuracy of test pieces (finished test pieces) (ISO 10791-7: 2014, IDT)

Association of German Mechanical Engineers

DVS 1194-1982 DVS conditions for participation in training and examination in DVS training centres
DVS 1194-1984 DVS conditions for participating in DVS training center training and examinations

National Standardisation Body (ASRO)

STAS 9869/1-1974 RUBBEK THREADS Determination of rcsistance to accelerated ageing in non-stressed condition

Yugoslav Association for Standardization

JUS N.M1.090-1990 Safetj reqairements. Instaotaneoas vater beaters. Particnlar covditions and tests

Standard Association of Australia （SAA）

AS 2597.12:1983 Methods of testing seat belts - Determination of retractor locking under acceleration

Der Energieeffizienzverband für Wärme, Kälte und KWK e. V.(AGFW)

AGFW FW 515 M:2015-07 Technical connection conditions heating water (TAB-HW)

International Commission on Illumination (CIE)

CIE TN 005-2016 Specifies the performance of lighting products under mesophotometric conditions
CIE x028:2005 Proceedings of the CIE Symposium '05 Vision and Lighting in Mesopic Conditions
CIE X028-2005 Proceedings of the CIE Symposium '05 Vision and Lighting in Mesopic Conditions

Society of Automotive Engineers (SAE)

SAE AMS5626D-1989 Steel Bars and Forgings@ Tool@ High Speed 4.1Cr - 18W - 1.1V
SAE AS334-8-1941 AS334-343 B.S.1 Chain (8m/m Pitch) and Fittings Assy Code

US Federal Contractor Registration (USFCR)

FCR UFGS-00 73 03-2008 SUPPLEMENTARY CONDITIONS FOR AZORES PROJECTS

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 7068-1-2008 Paper and board.Accelerated ageing.Part 1: Dry heat treatment at 105 degrees C

Belgian Standards Institute

NBN T 61-014-1989 Admixtures for concrete- Testing conditions

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE RP 180-1999 Spectral Conditions Defining Printing Density in Motion-Picture Negative and Intermediate Films

National Association of Corrosion Engineers (NACE)

NACE Paper 01034-2001 Corrosion rate measurement under high pressure and wet conditions

International Electrotechnical Commission (IEC)

IEC 60721-2-7:2018 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora

Aerospace Industries Association/ANSI Aerospace Standards

NAS1327-2011 SPACER@ THRU-HOLE@ SPLINE (Rev 1)

Czech Standards Institute (UNMZ)

CSN IEC 721-2-3:1993 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Air pressure