Dilution source
Dilution source, Total:446 items.
The international standard classification for "Dilution source" includes: Solid wastes , Paints and varnishes , Solvents , Food additives , Liquid wastes. Sludge , Radiation measurements .
The Chinese standard classification for "Dilution source" includes: Standardization and quality management , Coating , Coating auxiliary materials , Synthetic food additives , Specifications for pollution control , Ionizating Radiation Measurement , Basic standard and general method for coating .
Professional Standard - Medicine
- YY 91104-1999 Diluter
Taiwan Provincial Standard of the People's Republic of China
- CNS 10447-1983 Solvent Diluted Pust Preventive Oil
- CNS 3233-1980 Dope Thinner
- CNS 554-1986 Lacquer Thinner
- CNS 886-1986 Method of Test for Lacquer Thinner
Group Standards of the People's Republic of China
- T/CEMIA 019-2019 Thinner for display panels
- T/QGCML 3904-2024 Mixing and diluting device for shampoo production
- T/CASME 1483-2024 Specification for the use of diluents of poultry semen
- T/SDSCCE 063-2024 Diluent preparation from waste coal tar (HW11) and waste mineral oil (HW08)
- T/CVMA 21-2020 Broth Dilution Method for Drug Susceptibility Test of Bacteria of Animal Origin
- T/HEBQIA 114-2022 Alkyd thinner
- T/JSSES 13-2021 Regenerated diluter for electronic device manufacturing industry use
- T/QGCML 3254-2024 Mixing device for diluent processing
- T/SHZSAQS 00131-2022 Technical regulations for dilution and storage of fresh sheep essence
- T/HEBQIA 062-2022 Alkyd thinner
工业和信息化部
- HG/T 3378-2022 Thinner for coatings
Professional Standard - Chemical Industry
- HG/T 3859-2006 Method for blushing test of thinners and anti - Blushing agents
- HG/T 3378-2003 Thiner for nitrocellulose lacquer
- HG/T 3858-2006 Determination of water of thinners and retarders
- HG/T 3380-1987 Thiner for amino paint
- HG/T 3379-1987 Thinner For Chlorinated Polyvinyl Chloride Paints
- HG/T 3380-2003 Thiner for amino paint
- HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents
- HG/T 3378-1987 Thinner For Nitrocellulose Lacquer
- HG 2684-1995 Food Additives - Diluted Benzoyl Peroxide
- HG/T 3379-2003 Thiner for Perchlorvinyl Paint
- HG/T 3860-2006 Method of test for evaporation rate of thinners and anti - Blushing agents
Professional Standard - Speciality
- ZB G25001-1985 Preparation of industrial phosphamide diluted with isopropanol
- ZB G52003-1987 X-4 amino paint thinner
- ZB G52002-1987 X-3 perchlorethylene paint thinner
- ZB G52001-1987 X-1, X-2 nitro lacquer thinner
中国石油化工总公司
- SH 0354-1992 Solvent-diluted anti-rust oil
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 39299-2020 Methods for disposing reused thinner waste in the production of TFT-LCD
National Metrological Technical Specifications of the People's Republic of China
- JJF 2066-2023 Calibration Specification for Aerosol Diluters
- JJF 1267-2010 Primary method of isotope dilution mass spectrometry
Inner Mongolia Provincial Standard of the People's Republic of China
- DB15/T 2508-2022 Cashmere Goat Fresh Essence Diluent Formula
农业农村部
- NY/T 4142-2022 Technical code of practice of antimicrobial susceptibility tests for bacteria isolated from animals-Broth microdilution method
- NY/T 4143-2022 Technical code of practice of antimicrobial susceptibility tests for bacteria isolated from animals-Agar dilution method
未注明发布机构
- DIN 12839 E:2020-12 Dilution pipette, Demeter type 2.2
- DIN 12838 E:2020-12 Dilution pipette, Demeter type 1.1
- DIN EN ISO 6887-1 E:2014-01 Food chain microbiology Preparation of test samples, initial suspensions and decimal dilutions for microbial examinations Part 1: General rules for the preparation of initial suspensions and decimal dilutions (draft)
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents
- GB/T 1722-1992 of colour of varnishes, boiled oils and thinners
- GB/T 1753-1979 Method of test for evaporation rate of thinners and anti-blushing agents
- GB/T 1751-1992 Determination of water of thinners and retarders
- GB 19825-2005 Food additive-Diluted benzoyl peroxide
- GB/T 1752-1979 Method for blushing test of thinners and anti-blushing agents
Professional Standard - Environmental Protection
- HJ 1182-2021 Water quality—Determination of colority—Dilution level method
(U.S.) Ford Automotive Standards
- FORD SK-M14J9561-A-1995 THINNER
- FORD ESK-M14J512-A1-1988 THINNER
- FORD SK-M14J9573-B-1994 THINNER
- FORD SK-M14J9550-C-1994 THINNER
- FORD S-M14J4500-A-1994 THINNER
- FORD ESK-M14J233-A-1994 THINNER
- FORD SK-M14J9571-A-1994 THINNER
- FORD S-M14J210-A-1994 THINNER
- FORD ESK-M14J250-A-1990 THINNER
- FORD SK-M14J9571-B-1994 THINNER
- FORD WSK-M14J243-A-1990 THINNER
- FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
- FORD WSS-M14J519-A-1998 FADE OUT THINNER
- FORD WSS-M14J521-A1-1998 PRIMER THINNER
- FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
- FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
- FORD WSS-M14J520-A-1998 RETARDER THINNER
- FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
- FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
- FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
- FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS
- FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
- FORD ASL PAINTS-14J-2020 APPROVED SOURCE LIST (ASL) - CATEGORY PAINTS AND COATING MATERIALS - SOLVENTS / THINNERS
- FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
- FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
- FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
- FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
- FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
- FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
- FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)
- FORD M14J147-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100A)
- FORD WSS-M14J521-A2-1998 PURGE THINNER (Shown on WSS-M14J521-A1)
HU-MSZT
- MSZ 7480-1961 Thinner
- MSZ 09 80 015-1972 paint thinner
- MSZ 8576-1959 fat thinner
- MSZ 3268-1965 diluted bitumen
- MSZ 1584/4-1981 dilute melting agent
- MSZ 1584/7-1979 Diluted synthetic industrial melting agent
- MNOSZ 19958-1955 Sampling and inspection of diluted bitumen
- MSZ 1584/2-1981 Dilute industrial melting agent properties
- MSZ MI-05 22.660/3-1972 MI-05 22.660/3-72 Manual paint thinning
- MSZ 10196/1.lap-1962 Viscosity detection of plastics in diluent
- MSZ 11073-1962 to dilute mineral acid and lye solutions
TH-TISI
- TIS 865-2001 Cut.back asphalt
- TIS 1318-2009 Retarded thinner
- TIS 496-2010 Lacquer thinner
- TIS 496-1983(en) LACQUER THINNER
- TIS 520-2010 Nitrocellulose lacquer thinner
- TIS 520(1)-1984(en) AUTOMOTIVE NITROCELLULOSE LACQUER THINNER
SCC
- AS 2157:1978 Cutback bitumen
- AS 2157:1980 Cutback bitumen
- UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
- UNE-EN 14733:2006+A1:2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
- NS-EN 14733:2005 Bitumen and bituminous binders — Bituminous emulsions, fluxed and cut-back bitumen factory production control
- CAN/CGSB 1.110-M91-1991 Thinner for general use, for lacquer products
- CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
- CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
- CAN/CGSB-1.70-1999 High-Solvency Thinner
- HOLDEN HN 1057-2001 Kaylo Thinner No. 300
- AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
- CAN/CGSB-1.4-1992 Thinner, mineral spirits
- BS 5358:1976 Specification for low-lead solvent-thinned priming paint for woodwork
- CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
- CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
- HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating
- CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
- CAN/CGSB 1.4-2000 Diluant, essence minerale
- CAN/CGSB-1.124-1993 Thinner for Vinyl Coatings
- CAN/CGSB 1.70-1999 Thinner with high solvent power
- CAN/CGSB 1.94-M89-1989 Thinner, xylene (xylol)
- CAN/CGSB-1.5-M91-1991 Low Flash Petroleum Spirits Thinner
- BS 5082:1974 Specification for water-thinned priming paints for wood
- AENOR UNE 48085:1985 Water in solvents and diluents.
- CAN/CGSB-1.94-M89-1989 Thinner, xylene (xylol)
- NS 4749:1979 Biological oxygen demand, BOD — Dilution method
- BS 2000-113:1982 Methods of test for petroleum and its products-Flash point (closed) of cutback bitumen
- CAN/CGSB-1.124-1999 Thinner for vinyl resin coatings
- INT 29-1948 Thinner for Primer, Metal, Zinc Chromate
- ASTM D597-46 Specification for Cut-Back Asphalt (Rapid Curing Type)
- BS 2000-72:1982 Methods of test for petroleum and its products-Viscosity of cutback bitumen and road oil
- MIL MIL-T-81772B-1986 THINNER, AIRCRAFT COATING (SUPERSEDING MIL-T-81772A)
- DIN 12839 E:2020 Draft Document - Dilution pipette, Demeter type 2.2
- NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
- DIN 12838 E:2020 Draft Document - Dilution pipette, Demeter type 1.1
- AASHTO M 82-1975(2012) Standard Specification for Cutback Asphalt (Medium-Curing Type)
- CAN/CGSB 1.124-1999 Diluant pour revetements aux resines vinyliques
- DIN EN ISO 6887-1 E:2014 Draft Document - Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (ISO/DIS...
- NS-EN 15626:2016 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
- BS 5763-6:1983 Methods for microbiological examination of food and animal feeding stuffs-Preparation of dilutions
- VDI 3491 BLATT 15-1996 Measuring particles — Preparation processes for test aerosols — Continuous flow dilution systems
- AASHTO M 82-2017(2021) Standard Specification for Cutback Asphalt (Medium-Curing Type)
- DANSK DS/EN 15626:2016 Bitumen and bituminous binders – Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test – Aggregate method
- AENOR UNE 41106:1970 Fluidized bitumens ("cut-back") of the rapid curing type.
- AENOR UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesion of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
- UNE-EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
- AENOR UNE 41105:1970 Fluidized bitumens ("cut-back"), medium curing type.
- AS 1766.1.2:1991 Food microbiology, Method 1.2: General procedures and techniques - Preparation of dilutions
Korean Agency for Technology and Standards (KATS)
- KS M 2202-2021 Cutback asphalt
- KS M 2202-2016(2021) Cutback asphalt
- KS M 2202-2016 Cutback asphalt
- KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
- KS M 5803-1983 Thinner for Primer paint
- KS M 6060-2019 Thinner for organic coating materials
- KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
- KS M 6060-2005 Thinner for organic coating materials
- KS M 6060-2014 Thinner for organic coating materials
- KS M 2212-2011 Corrosion preventive oils solvent dilution
- KS M 0120-2009 General rule for dilution methods of standard solutions
- KS M 2212-2016 Corrosion preventive oils solvent dilution
- KS M 5801-1983 Thinner for synthetic resin enamel
- KS M 0120-2019 General rule for dilution methods of standard solutions
- KS M 6060-2009 Thinner for organic coating materials
- KS M 5802-1983 Thinner for Cashew resin Enamel
- KS M 6060-2014(2019) Thinner for organic coating materials
- KS M 5723-1997 THINNER FOR ACRYL RESIN ENAMEL
- KS M 5723-1997(2002) THINNER FOR ACRYL RESIN ENAMEL
- KS M 5723-2004 THINNER FOR ACRYL RESIN ENAMEL
- KS M 5468-1984 Test methods for dilution of components in lacquer
- KS M 2257-2022 Testing method for distillation of cut-back asphaltic products
- KS M 2257-2007(2022) Testing method for distillation of cut-back asphaltic products
- KS J ISO 6887-1-2007(2012) Microbiology of food and animal feeding stuffs-Preparation of test samples, initial suspension and decimal dilutions for microbiological examination-Part 1:General rules for the preparation of the ini
- KS M 2257-1982 Testing method for distillation of cut-back asphaltic products
- KS J ISO 6887-1-2007(2021) Microbiology of food and animal feeding stuffs-Preparation of test samples, initial suspension and decimal dilutions for microbiological examination-Part 1:General rules for the preparation of the ini
- KS M 2110-1986 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
- KS M 5553-1984 Test methods for ester keton contents of Thinner for lacquer
- KS M 2110-2011 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
- KS B ISO 8655-4:2017 Piston-operated volumetric apparatus-Part 4:Dilutors
- KS B ISO 8655-4-2017(2022) Piston-operated volumetric apparatus-Part 4:Dilutors
CZ-CSN
- CSN 67 3150 Cast.03-1975 Dilulion ability
- CSN 67 5839-1980 Thinner S 6900 for p^ints
- CSN 67 5811-1980 Thiímer H 6000 for paints
- CSN 67 5832-1980 Thinner S 6017 for paints
- CSN 65 7205-1977 Cut - back aaphalts for roads
- CSN 67 5814-1980 Thinner C 6002 for palnts
- CSN 67 5820-1980 Thinner S 6001 for paints
- CSN 67 5834-1980 Thinner S 6023 for paints
- CSN 67 5825-1980 Thinner S 6006 for paints
- CSN 67 5824-1980 Thinner S 6005 for paints
- CSN 67 5823-1980 Thinner S 6004 for pnints
- CSN 67 5821-1980 Thinner S 6002 for pnints
- CSN 67 5829-1980 Thinner S 6010 for paints
- CSN 67 5822-1980 Thinner S 6003 for paints
- CSN 65 1171-1986 Diluted phosphoric acid for industrial use
- CSN 67 5833-1980 Thinner S 6019 for paints
- CSN 67 5819-1980 Thinner L 6000 for paints
- CSN 67 5817-1980 Thinner C 6013 for paints
- CSN 67 5818-1980 Thinner C 6020 forpaints
- CSN 67 5831-1980 Thinner S 6QI4 for pninls
- CSN 67 5838-1980 Thinner S 6706 for paimts
- CSN 67 5841-1980 Thinner U 6000 for paints
- CSN 67 5836-1980 Thinner S 6301 for painls
- CSN 67 5840-1980 Thínner S 6904 for paints
- CSN 67 5813-1980 Thinner C 6001 forpaints
- CSN 67 5816-1980 Thinncr C 6004 for paints
- CSN 67 5826-1980 Thinner S 6007 for painls
- CSN 67 5827-1980 Thinner S 60Ofi fnrpnints
- CSN 67 5812-1980 Thinner C 6000 for paints
- CSN 67 5810-1980 Thlnner B 6000 for aints
- CSN 67 5837-1980 Thinner S 6302 for painLs
- CSN 67 5835-1980 Thinner S 6300 forpainls
- CSN 67 5830-1980 Thinner S 6013 forpaínls
- CSN 67 5815-1980 Thinner C 6003 for paints
- CSN 67 5828-1980 Thinner S 60O9 for paints
- CSN 67 5842-1980 Thinner U 6002 f o palnts
- CSN ON 67 5450-1964 Thinner for ehlorinated rubber paints
- CSN 65 7079-1983 Test for volatility of cut-back asphalts
- CSN ON 67 3650-1961 Thinner 6000 for oil paints
- CSN 67 5251-1959 Thinner. L6001 for paint L 1002
- CSN 65 7083-1981 Distillation of Cut - Back asphaltic /bítuminous/ products
- CSN 67 4701-1960 Speciál thinner C 6001 for itrocellulose paints
- CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution
- CSN 67 5801-1980 Thinn-ers for paínts. asic and generál equirements
- CSN 67 4255-1961 Thinner S 6005 for synthetic painta for ight metala
- CSN 67 4254-1960 Thinner S 6004 for paints S 1004 nd S 2016
Society of Automotive Engineers (SAE)
- SAE AMS3170F-2005 THINNER Alcohol-Ester
- SAE AMS3170E-1995 THINNER Alcohol-Ester
- SAE AMS3170D-1978 THINNER Alcohol-Ester
- SAE AMS3170C-1968 THINNER Alcohol - Ester
- SAE AMS3170B-1953 THINNER Alcohol - Ester
- SAE AMS3170A-1952 THINNER Alcohol - Ester
- SAE AMS3170-1948 THINNER Alcohol - Ester
- SAE AMS3180-1940 TOLUENE THINNER Commercial
- SAE AMS3180B-1952 TOLUENE THINNER Commercial
- SAE AMS3170F-1996 Thinner Alcohol-Ester
- SAE AMS3180A-1947 TOLUENE THINNER Commercial
- SAE AMS3180C-1963 TOLUENE THINNER Commercial
- SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
- SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
- SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
- SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning
- SAE AMS3430B-1994 BRAZING FILLER METAL, PASTE, COPPER Water Thinning
- SAE AMS3113-1945 Compound, Zinc Chromate, Sealing (Thinned) Hot Oil Resisting
United States Navy
- NAVY TT-T-2935-2000 THINNER, PURGING
- NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
- NAVY AN6004 REV 4-1971 REGULATOR - DILUTER DEMAND OXYGEN
- NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
- NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
- NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
- NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
- NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
- NAVY MS22062 REV F-1991 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
- NAVY MS22062 REV F NOTICE 1-1997 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
- NAVY QPL-16173-QPD-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-84 NOTICE 1-2008 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY MIL-R-25410 G-1991 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
- NAVY MIL-R-25410 G NOTICE 1-1997 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
- NAVY QPL-16173-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-QPD-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-2012 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
- NAVY QPL-16173-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
- NAVY QPL-16173-QPD-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
- NAVY QPL-16173-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
SAE - SAE International
- SAE AMS3170G-2008 Thinner@ Alcohol-Ester
- SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
- SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
- SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning
Japanese Industrial Standards Committee (JISC)
- JIS K 5538:2002 Lacquer thinner
- JIS K 5538:1995 Lacquer thinner
CH-SNV
- SEV 3064-1965 dilution. quality regulations
- SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery
- VSM 12008-1972 mineral oil. Lubricating oil diluted with gasoline
PL-PKN
- PN BN 6016-11-1966 Thinner. Ammonium sulfate
- PN BN 6118-13-1964 Aurit paint thinner
- PN BN 6118-20-1966 reactive pigment diluent
- PN BN 6118-16-1965 121 BT/01 paint thinner
- PN BN 6110-10-1964 Paint thinner. Sample selection
- PN BN 6118-10-1963 Chlorinated rubber product thinner
- PN BN 6118-21-1966 Epoxy asphalt product thinner
- PN BN 6118-22-1966 Epoxy coating product thinner
- PN BN 6118-04-1963 Paint MN-16 and TN-16 thinner
- PN BN 6118-19-1966 Styrenic Paint Product Thinner
- PN BN 6118-03-1963 Ethylene polymer product thinner
- PN BN 6110-14-1965 Paint thinner. Ingredients and labeling
- PN BN 6118-15-1965 Thermal Spray Nitrocellulose Paint Thinner
- PN A86034-03-1993 Milk and milk products. Microbiological examination. Preparation of samples and dilutions for examination
- PN BN 6118-07-1963 Universal nitrocellulose product thinner
- PN BN 6118-05-1963 Nitrocellulose Product Thinner No. 647
- PN BN 6118-11-1963 Chemically hardened coating product thinners
- PN BN 6118-09-1963 Asphalt paint and asphalt paint thinner
- PN BN 6118-01-1963 Nitrocellulose Paint Thinner for Skin
British Standards Institution (BSI)
- BS EN ISO 8655-4:2002 Piston-operated volumetric apparatus - Part 4:Dilutors
- BS EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Dilutors
- ISO 6887-1:2017/Amd 1:2024 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - General rules for the preparation of the initial suspension and decimal dilutions
- BS EN ISO 6887-1:2017+A1:2024 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - General rules for the preparation of the initial suspension and decimal dilutions
- BS EN ISO 6887-1:1999 Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. General rules for the preparation of the initial suspension and decimal dilutions
- 24/30454135 DC BS ISO 6863 Nuclear fuel technology - Preparation of spikes for isotope dilution mass spectrometry (IDMS)
- BS EN ISO 6887-1:2017 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. General rules for the preparation of the initial suspension and decimal dilutions
IN-BIS
- IS 217-1961 Specification for diluted bitumen
- IS 10232-1982 Guide to Preparation of Diluents for Food Microbiology Testing
- IS 454-1961 Specification for DIGBOI type diluted bitumen
GM Europe
- GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
- GME B 040 0394-2011 Cleaning thinner for spray booths
- GME L 000 0545-2004 Varnish Thinner A-II
- GME B 040 1514-2010 Flushing and cleaning thinner
- GME B 440 0225-2013 Thinner for top and clearcoats (English/German)
- GME B 040 1501-2014 Thinner for Spot-Repair (English/German)
- GME B 040 0227-2010 Cleaning and rinsing thinner
- GME B 040 0980-2003 Dilute wetting agent (English/German)
- GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)
- GME L 000 0537-2008 Thinner for 2-component clear coat
- GME L 000 0570-2013 Thinner for metaleffect base coat (English/German)
GM North America
- GM 9985784-1993 Lubricant, Rubber (Nonwater Dilutable)
- GM 9985231-1973 Copper Brazing Paste, Water Thinning
- GM 9984478-1997 Purge Thinner - for Enamels
- GM 9984036-1990 Purge Thinner - Reclaimed
- GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel
- GM 9984454-1990 Reducing Solvents for Primers (Shown on 9984446)
- GM 9984431-1990 Reducing Solvents for Topcoats (Shown On 9984425)
- GM 9984462-1990 Reducing Solvents for Topcoats (Shown on 9984425)
- GM 9984500-1990 Reducing Solvents for Primers (Shown on 9984446)
- GM 9984430-1990 Reducing Solvents for Topcoats (Shown On 9984425)
- GM 9984495-1990 Reducing Solvents for Topcoats (Shown on 9984425)
- GM 9984424-1990 Thinner - Evaporation Loss for Solution Lacquer
- GM 9984464-1990 Reducing Solvents for Primers (Shown on 9984446)
- GM 9984466-1990 Reducing Solvents for Primers (Shown on 9984446)
- GM 9984497-1990 Reducing Solvents for Primers (Shown on 9984446)
- GM 9984493-1989 Purge Thinner for 9984111 Replaced by 9984478
- GM 9984494-1990 Reducing Solvents for Topcoats (Shown on 9984425)
- GM 9984436-1990 Reducing Solvents for Topcoats (Shown on 9984425)
- GM 9984499-1990 Reducing Solvents for Primers (Shown on 9984446)
- GM 9985784-2014 Lubricant, Rubber (Nonwater Dilutable) (Issue 2)
IL-SII
- S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS
American Society for Testing and Materials (ASTM)
- ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM D2399-83(2005) Standard Practice for Selection of Cutback Asphalts
- ASTM D402-97 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
- ASTM D2399-83(1999) Standard Practice for Selection of Cutback Asphalts
- ASTM D402-02 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
- ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting
- ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
- ASTM E788-97(2003) Standard Specification for Pipet, Blood Diluting
- ASTM D2028-97 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- ASTM E788-97(2019) Standard Specification for Pipet, Blood Diluting
- ASTM D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- ASTM E788-97 Standard Specification for Pipet, Blood Diluting
- ASTM D2028-97(2004) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- ASTM D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM D2027/D2027M-19(2024) Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM D2399-12 Standard Practice for Selection of Cutback Asphalts
- ASTM D402/D402M-24 Standard Test Method for Distillation of Cutback Asphalt
- ASTM D2399-21 Standard Practice for Selection of Cutback Asphalts
BR-ABNT
- ABNT EB-96R-1956 alkyd enamel thinner
- ABNT MB-230R-1956 Alkyd enamel diluent testing
- ABNT EB-33-1945 Dilute lead chrome green. Brazilian specifications
- ABNT EB-99-1968 Diluted asphalt concrete and residual oil
- ABNT NBR 5765-2012 Diluted asphalt — Determinations of flashpoint — Tag open cup
Military Standards (MIL-STD)
- DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING
- DOD A-A-54126-1990 PIPET-DILUENT, BLOOD, LABORATORY
Canadian General Standards Board (CGSB)
- CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
- CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve
- CGSB 1.124-99-CAN/CGSB-1999 Thinner for Vinyl Coatings
- CGSB 1.4-00-CAN/CGSB-2000 Petroleum Spirits Thinner
Association Francaise de Normalisation
- NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
- NF B35-206:1968 Laboratory glassware. Dilution pipettes.
- NF EN ISO 6887-1:2017 Microbiology of the food chain - Preparation of samples, stock suspension and decimal dilutions for microbiological examination - Part 1: general rules for the preparation of stock suspension and dilutions...
- NF V08-010-1*NF EN ISO 6887-1:2017 Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1 : general rules for the preparation of the initial suspension and decimal dilutions
KR-KS
- KS M 2212-2022 Solvent dilution type rust preventive oils
- KS B ISO 8655-4-2017 Piston-operated volumetric apparatus-Part 4:Dilutors
- KS J ISO 6887-1-2022 Microbiology of the food chain Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 1: General rules for the preparation of the initial suspension
AR-IRAM
- IRAM 6608-1959 Fast hardening diluted asphalt
- IRAM 6610-1959 Medium speed hardening diluted asphalt
- IRAM 6612-1959 Low speed hardening diluted asphalt
- IRAM 6595-1956 Distillation test method for diluted bitumen
- IRAM 6611-1959 How to determine the hardening index of diluted asphalt
German Institute for Standardization
- DIN 12838:2021 Dilution pipette, Demeter type 1,1
- DIN 12838:2021-08 Dilution pipette, Demeter type 1,1
- DIN 12839:2021-08 Dilution pipette, Demeter type 2,2
- DIN 12839:2021 Dilution pipette, Demeter type 2,2
- DIN 12838:1964 Dilution pipette, Demeter type 1.1
- DIN EN ISO 6887-1:1999 Microbiology of food and animal feeding stuffs - Preparation of the test samples, of initial suspension and of decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (I
- DIN 12839:1964 Dilution pipette, Demeter type 2.2
- DIN 12750:1969 Blood dilution pipettes for blood corpuscles counting
- DIN 53238-24:1995 Pigments and extenders - Method for assessment of ease of dispersion - Part 24: Microscopic assessment of dispersions of pigments and extenders
AIA/NAS - Aerospace Industries Association of America Inc.
- NAS1615-1981 Primer Coating Water Reducible@ Corrosion Inhibiting (Rev 2)
- NAS1616-1981 Topcoat@ Water Reducible (Rev 1)
- NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)
GM Daewoo
- GMKOREA EDS-M-8718-2007 ESTA CLEANING THINNER (VERSION: 4)
- GMKOREA EDS-T-7680-2011 Solubility test of sound insulation pad diluent
Defense Logistics Agency
- DLA DD-B-601-1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS
YU-JUS
- JUS H.P8.514-1986 Testing of pesticide?. Dilution stability
- JUS U.M3.030-1996 Cutback asphalts for roads - Quality reguirements
International Organization for Standardization (ISO)
- ISO 8261:1989 Milk and milk products — Preparation of test samples and dilutions for microbiological examination
- ISO 8261:2001|IDF 122: 2001 Milk and milk products — General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
- ISO 6887:1983 Microbiology - General Guidance for the Preparation of Dilutions for Microbiological Examination First Edition
- ISO/CD 6863 Preparation of Plutonium and Uranium spikes for Isotope Dilution Mass Spectrometry (IDMS)
- ISO 8261:2001 Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
- ISO 8655-4:2022 Piston-operated volumetric apparatus — Part 4: Dilutors
AENOR
- UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
- UNE 48097:2001 Paints and varnishes. Dilution stability.
- UNE 48057:1960 CORROSION TEST, OF SOLVENTS AND DILUENTS
- UNE 7149:1959 MODIFIED MIXIBILITY TEST OF WATER CUTBACKS.
- UNE 7148:1959 MIXIBILITY TEST OF WATER AND COAGULATION CUTBACKS.
ES-AENOR
- UNE 48-085-1985 Water in solvents and diluents
- UNE 48 057 Corrosion testing of solvents and diluents
- UNE 30 148 Analytical reagents. Perchloric acid (diluted to 70%) CI04HM 100,46
U.S. Military Regulations and Norms
- ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
- ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
- ARMY A-A-857 B VALID NOTICE 2-2009 Thinner, Dope and Lacquer (Cellulose Nitrate)
Standard Association of Australia (SAA)
- AS 1766.5:1994 Food microbiology - Preparation of culture media, diluents and reagents
Indonesia Standards
- SNI 06-6018-1999 Test method for gasoline diluent in used gasoline engine oils by distilation
- SNI ISO 6887-1:2012 pengujian mikrobiologi – Bagian 1: Aturan umum untuk penyiapan suspensi awal dan pengenceran desimal
NL-NEN
- NEN 3905-1982 Bitumen and tar products - Cut-back bitumen
- NEN 6872-1985 Milk and milk products - Preparation of the sample and preparation of dilutions for microbiological examination
RO-ASRO
- STAS 3122-1980 Paints and varnishes. THINNERS FOR NITROCELLULOSE ASE PRODUCTS
- STAS SR ISO 8261:1996 Milk and milk products - Preparation of test samples and dilutions for microbiological examination
- STAS 3123-1985 VABNISHES AND PAINTS Thinners for alkyde resin base products
- STAS 52-1980 PETROLEUM DIEUENTS FOR T1M- BER PRESERVATION IMPREGNATES
- STAS 3122-1985 VARNISHES AND PAINTS Thinners for nitrocellulose base preducts
GSO
- OS GSO 652:1996 Microbiology – general guidance for the preparation of dilutions for microbiological examination
- GSO 652:1996 Microbiology – general guidance for the preparation of dilutions for microbiological examination
RU-GOST R
- GOST 23745-2014 Product for reproduction. Fresh non-diluted sperm of bulls. Specifications
- GOST 20909.1-1975 Non-diluted sperm of bulls. Method of sampling
- GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions
- GOST 32057-2013 Cutback bituminous products. Determination of distillation characteristics
- GOST 11034-1982 Polyamides. Method for determination of the viscosity number of dilute solution
Aerospace Industries Association
- AIA NAS 1615-1981 (Inactive)Primer Coating Water Reducible, Corrosion Inhibiting (Rev. 2)
- AIA NAS 1616-1981 (Inactive)Topcoat, Water Reducible (Rev. 1)
General Motors Corporation (GM)
- GM 9985555-1989 Lubricant, Tire Mounting, Prediluted
US-CFR-file
- CFR 40-1065.240-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.240:Dilution air and diluted exhaust flow meters.
The American Road & Transportation Builders Association
- AASHTO M 82-2017 Standard Specification for Cutback Asphalt (Medium-Curing Type)
- AASHTO M 81-92(R2017) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
TR-TSE
- TS 122-1978 STANDARD METHOD OF DISTILLATION TEST FOR CUT-BACK ASPHALTIC PRODUCTS
CU-NC
- NC 26-150-1986 Veterinary Drugs Glyoerate Diluent Teatine Methods
- NC 26-75-44-1990 Drugs. Diluent Sauton Injection. Quality Süecifications
API - American Petroleum Institute
- API PUBL 4664-1998 Mixing Zone Modeling and Dilution Analysis for Water-Quality-Based NPDES Permit Limits
AASHTO - American Association of State Highway and Transportation Officials
- M82-1975 Standard Specification for Cut-Back Asphalt (Medium-Curing Type)
- M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)
European Committee for Standardization (CEN)
- EN ISO 6887-1:2017 Microbiology of the food chain - Preparation of test samples@ initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions
US-GSA
- GSA A-A-857 B VALID NOTICE 1-2004 THINNER, DOPE AND LACQUER (CELLULOSE NITRATE)
ES-UNE
- UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
FI-SFS
- SFS 3019-1979 Determine the biochemical oxygen demand in water. dilution method