density dilution

density dilution, Total:278 items.

The international standard classification for "density dilution" includes: Paints and varnishes .

The Chinese standard classification for "density dilution" includes: Coating , Coating auxiliary materials , Vacuum grease and anti-rust grease , Basic standard and general method for coating .

Group Standards of the People's Republic of China

T/HEBQIA 062-2022 Alkyd thinner
T/QGCML 3254-2024 Mixing device for diluent processing
T/CEMIA 019-2019 Thinner for display panels
T/HEBQIA 114-2022 Alkyd thinner
T/SHZSAQS 00131-2022 Technical regulations for dilution and storage of fresh sheep essence
T/CASME 1483-2024 Specification for the use of diluents of poultry semen

Professional Standard - Medicine

YY 91104-1999 Diluter

Professional Standard - Environmental Protection

HJ 1182-2021 Water quality—Determination of colority—Dilution level method

Taiwan Provincial Standard of the People's Republic of China

CNS 554-1986 Lacquer Thinner
CNS 3233-1980 Dope Thinner
CNS 10447-1983 Solvent Diluted Pust Preventive Oil
CNS 886-1986 Method of Test for Lacquer Thinner

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2508-2022 Cashmere Goat Fresh Essence Diluent Formula

Professional Standard - Chemical Industry

HG/T 3380-1987 Thiner for amino paint
HG/T 3380-2003 Thiner for amino paint
HG/T 3379-2003 Thiner for Perchlorvinyl Paint
HG/T 3379-1987 Thinner For Chlorinated Polyvinyl Chloride Paints
HG/T 3378-1987 Thinner For Nitrocellulose Lacquer
HG/T 3378-2003 Thiner for nitrocellulose lacquer

工业和信息化部

HG/T 3378-2022 Thinner for coatings

Professional Standard - Petrochemical Industry

SH/T 0105-1992 Determination of oil film thickness of solvent cutback rust preventive oil

中国石油化工总公司

SH 0354-1992 Solvent-diluted anti-rust oil

Professional Standard - Speciality

ZB G52002-1987 X-3 perchlorethylene paint thinner
ZB G52003-1987 X-4 amino paint thinner
ZB G52001-1987 X-1, X-2 nitro lacquer thinner

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1721-1979 Methods of test for appearance and transparency of varnishes, boiled oils and thinners
GB/T 1721-2008 Determination of appearance and transparency of varnishes boiled oils and thinners

Professional Standard - Urban Construction

CJ/T 3018.2-1993 Leachate -- determination of colority -- multiple dilution method

National Metrological Technical Specifications of the People's Republic of China

JJF 2066-2023 Calibration Specification for Aerosol Diluters

Canadian General Standards Board （CGSB)

CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve
CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
CGSB 1.124-99-CAN/CGSB-1999 Thinner for Vinyl Coatings

CZ-CSN

CSN 65 7079-1983 Test for volatility of cut-back asphalts
CSN 67 3150 Cast.03-1975 Dilulion ability
CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 67 5811-1980 Thiímer H 6000 for paints
CSN 65 7205-1977 Cut - back aaphalts for roads
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 65 1171-1986 Diluted phosphoric acid for industrial use
CSN 67 5833-1980 Thinner S 6019 for paints
CSN 67 5819-1980 Thinner L 6000 for paints
CSN 67 5817-1980 Thinner C 6013 for paints
CSN 67 5836-1980 Thinner S 6301 for painls
CSN 67 5840-1980 Thínner S 6904 for paints
CSN 67 5831-1980 Thinner S 6QI4 for pninls
CSN 67 5818-1980 Thinner C 6020 forpaints
CSN 67 5838-1980 Thinner S 6706 for paimts
CSN 67 5841-1980 Thinner U 6000 for paints
CSN 67 5813-1980 Thinner C 6001 forpaints
CSN 67 5816-1980 Thinncr C 6004 for paints
CSN 67 5826-1980 Thinner S 6007 for painls
CSN 67 5827-1980 Thinner S 60Ofi fnrpnints
CSN 67 5812-1980 Thinner C 6000 for paints
CSN 67 5810-1980 Thlnner B 6000 for aints
CSN 67 5837-1980 Thinner S 6302 for painLs
CSN 67 5835-1980 Thinner S 6300 forpainls
CSN 67 5830-1980 Thinner S 6013 forpaínls
CSN 67 5815-1980 Thinner C 6003 for paints
CSN 67 5828-1980 Thinner S 60O9 for paints
CSN 67 5842-1980 Thinner U 6002 f o palnts
CSN ON 67 5450-1964 Thinner for ehlorinated rubber paints
CSN ON 67 3650-1961 Thinner 6000 for oil paints
CSN 67 5251-1959 Thinner. L6001 for paint L 1002

Society of Automotive Engineers (SAE)

SAE AMS3113-1945 Compound, Zinc Chromate, Sealing (Thinned) Hot Oil Resisting
SAE AMS3112-1945 Compound, Zinc Chromate, Sealing (Unthinned) Hot Oil Resisting
SAE AMS3115-1945 Compound, Zinc Chromate, Sealing (Thinned) Aromatic Fuel Resisting
SAE AMS3170F-2005 THINNER Alcohol-Ester
SAE AMS3170E-1995 THINNER Alcohol-Ester
SAE AMS3170D-1978 THINNER Alcohol-Ester
SAE AMS3114-1945 Compound, Zinc Chromate, Sealing (Unthinned) Aromatic Fuel Resisting
SAE AMS3170C-1968 THINNER Alcohol - Ester
SAE AMS3170B-1953 THINNER Alcohol - Ester
SAE AMS3170A-1952 THINNER Alcohol - Ester
SAE AMS3170-1948 THINNER Alcohol - Ester
SAE AMS3180B-1952 TOLUENE THINNER Commercial
SAE AMS3180-1940 TOLUENE THINNER Commercial
SAE AMS3170F-1996 Thinner Alcohol-Ester
SAE AMS3180A-1947 TOLUENE THINNER Commercial
SAE AMS3180C-1963 TOLUENE THINNER Commercial
SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning

(U.S.) Ford Automotive Standards

FORD SK-M14J9561-A-1995 THINNER
FORD ESK-M14J512-A1-1988 THINNER
FORD SK-M14J9573-B-1994 THINNER
FORD SK-M14J9550-C-1994 THINNER
FORD S-M14J4500-A-1994 THINNER
FORD ESK-M14J233-A-1994 THINNER
FORD SK-M14J9571-A-1994 THINNER
FORD S-M14J210-A-1994 THINNER
FORD ESK-M14J250-A-1990 THINNER
FORD SK-M14J9571-B-1994 THINNER
FORD WSK-M14J243-A-1990 THINNER
FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
FORD WSS-M14J519-A-1998 FADE OUT THINNER
FORD WSS-M14J521-A1-1998 PRIMER THINNER
FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
FORD S-M14J19-A-1995 THINNER, TOLUENE/XYLENE, LACQUER VISCOSITY REDUCTION
FORD WSS-M14J520-A-1998 RETARDER THINNER
FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS
FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)

HU-MSZT

MSZ 7480-1961 Thinner
MSZ 10196/1.lap-1962 Viscosity detection of plastics in diluent
MSZ 09 80 015-1972 paint thinner
MSZ 8576-1959 fat thinner
MSZ 3268-1965 diluted bitumen
MSZ 1584/4-1981 dilute melting agent
MSZ 1584/7-1979 Diluted synthetic industrial melting agent
MNOSZ 19958-1955 Sampling and inspection of diluted bitumen
MSZ 1584/2-1981 Dilute industrial melting agent properties

American Society for Testing and Materials (ASTM)

ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2857-95(2001) Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D2857-95 Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D2399-83(2005) Standard Practice for Selection of Cutback Asphalts
ASTM D2399-83(1999) Standard Practice for Selection of Cutback Asphalts

TH-TISI

TIS 865-2001 Cut.back asphalt
TIS 1318-2009 Retarded thinner
TIS 496-2010 Lacquer thinner
TIS 496-1983(en) LACQUER THINNER
TIS 520-2010 Nitrocellulose lacquer thinner
TIS 2489.1-2010 Standard test method for thinner.part 1: sayboltcolor

SCC

AS 2157:1978 Cutback bitumen
AS 2157:1980 Cutback bitumen
NS-EN 14896:2006 Bitumen and bituminous binders — Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders — Rotating spindle viscometer method
CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
UNE-EN 14896:2007 Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method
CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
CAN/CGSB-1.70-1999 High-Solvency Thinner
HOLDEN HN 1057-2001 Kaylo Thinner No. 300
AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
CAN/CGSB-1.4-1992 Thinner, mineral spirits
CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating
BS 2000-72:1988 Methods of test for petroleum and its products-Viscosity of cut-back bitumen
CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
CAN/CGSB 1.4-2000 Diluant, essence minerale
BS 3680-3:1964 Measurement of liquid flow in open channels. Dilution methods. Velocity area methods
CAN/CGSB-1.124-1993 Thinner for Vinyl Coatings
CAN/CGSB 1.70-1999 Thinner with high solvent power
CAN/CGSB 1.94-M89-1989 Thinner, xylene (xylol)
CAN/CGSB-1.5-M91-1991 Low Flash Petroleum Spirits Thinner
BS 5082:1974 Specification for water-thinned priming paints for wood
AWWA JAW34943 Journal AWWA — Table of Values of Most Probable Numbers: Ten Tubes, Three Dilutions
AENOR UNE 48085:1985 Water in solvents and diluents.
CAN/CGSB-1.94-M89-1989 Thinner, xylene (xylol)
NS 4749:1979 Biological oxygen demand, BOD — Dilution method
UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
UNE-EN 14733:2006+A1:2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
CAN/CGSB-1.124-1999 Thinner for vinyl resin coatings
NS-EN 14733:2005 Bitumen and bituminous binders — Bituminous emulsions, fluxed and cut-back bitumen factory production control
INT 29-1948 Thinner for Primer, Metal, Zinc Chromate

Korean Agency for Technology and Standards (KATS)

KS M 2202-2021 Cutback asphalt
KS M 2202-2016(2021) Cutback asphalt
KS M 2202-2016 Cutback asphalt
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5803-1983 Thinner for Primer paint
KS M 6060-2019 Thinner for organic coating materials
KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
KS M 6060-2005 Thinner for organic coating materials
KS M 6060-2014 Thinner for organic coating materials
KS M 2212-2011 Corrosion preventive oils solvent dilution
KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 2212-2016 Corrosion preventive oils solvent dilution
KS M 5554-1984 Standard Test Method for Acidity in solvent, Thinner for lacquer
KS M 5801-1983 Thinner for synthetic resin enamel
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 6060-2009 Thinner for organic coating materials
KS M 5802-1983 Thinner for Cashew resin Enamel
KS M 6060-2014(2019) Thinner for organic coating materials
KS M 5552-1984 METHOD FOR DETERMINING MOISTURE by Test method of turbidity for solvent and thinner
KS M 5723-1997 THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-1997(2002) THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-2004 THINNER FOR ACRYL RESIN ENAMEL

GM Daewoo

GMKOREA EDS-T-7680-2011 Solubility test of sound insulation pad diluent
GMKOREA EDS-M-8718-2007 ESTA CLEANING THINNER (VERSION: 4)

United States Navy

NAVY TT-T-2935-2000 THINNER, PURGING
NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
NAVY AN6004 REV 4-1971 REGULATOR - DILUTER DEMAND OXYGEN
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND

SAE - SAE International

SAE AMS3170G-2008 Thinner@ Alcohol-Ester
SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning

RU-GOST R

GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions
GOST 11034-1982 Polyamides. Method for determination of the viscosity number of dilute solution
GOST 18249-1972 Plastics. Method for viscosity determination of diluted polymer solution

Japanese Industrial Standards Committee (JISC)

JIS K 5538:2002 Lacquer thinner
JIS K 5538:1995 Lacquer thinner

CH-SNV

SEV 3064-1965 dilution. quality regulations
SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery

PL-PKN

PN BN 6016-11-1966 Thinner. Ammonium sulfate
PN BN 6118-13-1964 Aurit paint thinner
PN BN 6118-20-1966 reactive pigment diluent
PN BN 6118-16-1965 121 BT/01 paint thinner
PN BN 6110-10-1964 Paint thinner. Sample selection
PN BN 6118-10-1963 Chlorinated rubber product thinner
PN BN 6118-21-1966 Epoxy asphalt product thinner
PN BN 6118-22-1966 Epoxy coating product thinner
PN BN 6118-04-1963 Paint MN-16 and TN-16 thinner
PN BN 6118-19-1966 Styrenic Paint Product Thinner
PN BN 6118-03-1963 Ethylene polymer product thinner
PN BN 6110-14-1965 Paint thinner. Ingredients and labeling

GM Europe

GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
GME B 040 0394-2011 Cleaning thinner for spray booths
GME L 000 0545-2004 Varnish Thinner A-II
GME B 040 1514-2010 Flushing and cleaning thinner
GME B 440 0225-2013 Thinner for top and clearcoats (English/German)
GME B 040 1501-2014 Thinner for Spot-Repair (English/German)
GME B 040 0227-2010 Cleaning and rinsing thinner
GME B 040 0980-2003 Dilute wetting agent (English/German)
GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)

IN-BIS

IS 217-1961 Specification for diluted bitumen
IS 454-1961 Specification for DIGBOI type diluted bitumen

IL-SII

S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS

Association Francaise de Normalisation

NF T66-005:1986 Petroleum products. Fluidified bitumen and fluxed bitumen. Determination of pseudo-viscosity.
NF T60-195:1993 Fluides d'usinage aqueux - Opacité à l'état dilué
NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
NF T12-005:1981 Cellulose. Determination of the maximum viscosity index of the cellulose in dilute solutions.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE CH-99-7-1-1999 Dilution Calculations for Determining Laboratory Exhaust Stack Heights

BR-ABNT

ABNT EB-96R-1956 alkyd enamel thinner
ABNT MB-230R-1956 Alkyd enamel diluent testing
ABNT EB-33-1945 Dilute lead chrome green. Brazilian specifications
ABNT EB-99-1968 Diluted asphalt concrete and residual oil

Military Standards (MIL-STD)

DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING

GM North America

GM 9985231-1973 Copper Brazing Paste, Water Thinning
GM 9984478-1997 Purge Thinner - for Enamels
GM 9984036-1990 Purge Thinner - Reclaimed
GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel

RO-ASRO

STAS 9048-1986 PLASTICS Viscosity determination of polyamides in diluted solutions

FI-SFS

SFS 3230-1976 plastic. Determination of viscosity of polyvinyl chloride in diluent

International Organization for Standardization (ISO)

ISO 307:1977 Plastics — Determination of viscosity number of polyamides in dilute solution
ISO 1157:1990 Plastics; cellulose acetate in dilute solution; determination of viscosity number and viscosity ratio

KR-KS

KS M 2212-2022 Solvent dilution type rust preventive oils

AR-IRAM

IRAM 6608-1959 Fast hardening diluted asphalt
IRAM 6610-1959 Medium speed hardening diluted asphalt
IRAM 6612-1959 Low speed hardening diluted asphalt

German Institute for Standardization

DIN 12838:2021 Dilution pipette, Demeter type 1,1
DIN 12838:2021-08 Dilution pipette, Demeter type 1,1
DIN 12839:2021-08 Dilution pipette, Demeter type 2,2
DIN 12839:2021 Dilution pipette, Demeter type 2,2

Defense Logistics Agency

DLA DD-B-601-1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS

YU-JUS

JUS H.P8.514-1986 Testing of pesticide?. Dilution stability

AENOR

UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
UNE 48097:2001 Paints and varnishes. Dilution stability.

ES-AENOR

UNE 48-085-1985 Water in solvents and diluents

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1616-1981 Topcoat@ Water Reducible (Rev 1)

U.S. Military Regulations and Norms

ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE

British Standards Institution (BSI)

BS EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Dilutors

Indonesia Standards

SNI 06-6018-1999 Test method for gasoline diluent in used gasoline engine oils by distilation

Standard Association of Australia （SAA）

AS/NZS 1580.214.4:1996 Paints and related materials - Methods of test - Consistency - Rotothinner