dilution

dilution, Total:452 items.

The international standard classification for "dilution" includes: Paints and varnishes , Food additives , Solvents , Radiation measurements , Liquid wastes. Sludge , Water quality , Protection against dangerous goods , Medical Sciences and health care facilities in general , Sterilization and disinfection .

The Chinese standard classification for "dilution" includes: Coating , Coating auxiliary materials , Synthetic food additives , Ionizating Radiation Measurement , Specifications for pollution control , Analysis methods for toxic substances in water , Marking, packaging, transport and storage in general , Vacuum grease and anti-rust grease , Sanitation in general , .

Professional Standard - Chemical Industry

HG/T 3379-2003 Thiner for Perchlorvinyl Paint
HG/T 3860-2006 Method of test for evaporation rate of thinners and anti - Blushing agents
HG/T 3378-2003 Thiner for nitrocellulose lacquer
HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents
HG/T 3858-2006 Determination of water of thinners and retarders
HG/T 3380-2003 Thiner for amino paint
HG/T 3859-2006 Method for blushing test of thinners and anti - Blushing agents
HG 2684-1995 Food Additives - Diluted Benzoyl Peroxide
HG/T 3379-1987 Thinner For Chlorinated Polyvinyl Chloride Paints
HG/T 3380-1987 Thiner for amino paint
HG/T 3378-2022 Thinner for coatings
HG/T 3378-1987 Thinner For Nitrocellulose Lacquer

未注明发布机构

FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)
FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
FORD ESK-M14J250-A-1990 THINNER
FORD WSK-M14J243-A-1990 THINNER
FORD S-M14J210-A-1994 THINNER
FORD S-M14J4500-A-1994 THINNER
FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
FORD M14J147-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100A)
FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SK-M14J9550-C-1994 THINNER
FORD SK-M14J9571-B-1994 THINNER
FORD ESK-M14J233-A-1994 THINNER
FORD WSS-M14J521-A2-1998 PURGE THINNER (Shown on WSS-M14J521-A1)
FORD WSS-M14J520-A-1998 RETARDER THINNER
FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
FORD SK-M14J9571-A-1994 THINNER
FORD WSS-M14J521-A1-1998 PRIMER THINNER
CLSI M07-2018 Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically
FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
FORD ESK-M14J512-A1-1988 THINNER
FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
FORD SK-M14J9561-A-1995 THINNER
FORD SK-M14J9573-B-1994 THINNER
FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
FORD WSS-M14J519-A-1998 FADE OUT THINNER
FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS

Professional Standard - Medicine

YY 91104-1999 Diluter

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2508-2022 Cashmere Goat Fresh Essence Diluent Formula

Taiwan Provincial Standard of the People's Republic of China

CNS 10447-1983 Solvent Diluted Pust Preventive Oil
CNS 3233-1980 Dope Thinner
CNS 886-1986 Method of Test for Lacquer Thinner
CNS 554-1986 Lacquer Thinner

Professional Standard - Speciality

ZB G52003-1987 X-4 amino paint thinner
ZB G52001-1987 X-1, X-2 nitro lacquer thinner
ZB G52002-1987 X-3 perchlorethylene paint thinner

National Metrological Technical Specifications of the People's Republic of China

JJF 1267-2010 Primary method of isotope dilution mass spectrometry
JJF 2066-2023 Calibration Specification for Aerosol Diluters

Group Standards of the People's Republic of China

T/HEBQIA 114-2022 Alkyd thinner
T/CVMA 21-2020 Broth Dilution Method for Drug Susceptibility Test of Bacteria of Animal Origin
T/QGCML 3904-2024 Mixing and diluting device for shampoo production
T/CEMIA 019-2019 Thinner for display panels
T/SHZSAQS 00131-2022 Technical regulations for dilution and storage of fresh sheep essence
T/HEBQIA 062-2022 Alkyd thinner
T/ZAAM 0001-2021 Odor evaluation method for interior parts and materials of passenger cars--dilution method
T/CASME 1483-2024 Specification for the use of diluents of poultry semen
T/QGCML 3254-2024 Mixing device for diluent processing
T/CASME 1654-2024 Thinner for printing ink

Professional Standard - Environmental Protection

HJ 505-2009 Water Quality - Determination of Biochemical Oxygen Demand after 5 Days (BOD5) for Dilution and Seeding Method
HJ 1182-2021 Water quality—Determination of colority—Dilution level method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7488-1987 Water quality; Determination of biochemical oxygen demand after 5 days(BOD5); Dilution and seeding method
GB 19825-2005 Food additive-Diluted benzoyl peroxide
GB/T 1751-1992 Determination of water of thinners and retarders
GB/T 27848-2011 Liquid asphalt and derivatives - Determination of flash point - Abel closed tester
GB/T 1753-1979 Method of test for evaporation rate of thinners and anti-blushing agents
GB/T 1752-1979 Method for blushing test of thinners and anti-blushing agents
GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents
GB/T 39299-2020 Methods for disposing reused thinner waste in the production of TFT-LCD

Henan Provincial Standard of the People's Republic of China

DB41/T 507-2017 7 Limits of harmful substances in alkyd paint thinner

Professional Standard - Petrochemical Industry

SH 0354-1992 Solvent-diluted anti-rust oil
SH/T 0474-2000 Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography
NB/SH/T 0823-2010 Standard Test Method for Corrosion-preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
NB/SH/T 0474-2010 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
NB/SH/T 0808-2010 Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
SH/T 0105-1992 Determination of oil film thickness of solvent cutback rust preventive oil

Military Standard of the People's Republic of China-General Armament Department

GJB 3459A-2021 Specification for military solvent-diluted protective penetrating oils

Professional Standard - Petroleum

SY/T 0532-2012 Analysis Method of the Bacteria for Oilfield Injecting Water. Disappearing Dilution Method
SY/T 0532-1993 Bacteria analysis method for oil field injection water extinction dilution method

Professional Standard - Hygiene

WS/T 798-2022 Qualitative testing standard on disinfection effect of disinfectant——use dilution method
WS/T 411-2013 Antifungal susceptibiliy testing of filamentous fungi-Broth dilution ethod
WS/T 421-2024 Standards for antifungal susceptibility testing of yeasts-Broth dilution method
WS/T 411-2024 Standards for antifungal susceptibility testing of filamentous fungi Broth dilution method
WS/T 421-2013 Antifungal susceptibility testing of yeasts-Broth dilution method

Professional Standard - Urban Construction

CJ/T 3018.2-1993 Leachate -- determination of colority -- multiple dilution method
CJ/T 54-1999 Municipal sewage.Determination of biochemical oxygen demand after 5 days (BODs).Dilution and seeding method

Professional Standard - Nuclear Industry

EJ/T 842-1994 Zinc Isotope Ratio and Zinc Content Measurement Double Dilution Mass Spectrometry

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1769-2014 Limits of harmful substances in thinners for solvent-based wood coatings

Anhui Provincial Standard of the People's Republic of China

DB34/T 4100-2022 Technical Requirements for Recycling of Flat Panel Displays by Diluent Distillation

Magyar Szabványügyi Testület

MSZ 7480-1961 Thinner
MSZ 09 80 015-1972 paint thinner
MSZ 8576-1959 fat thinner
MSZ 3268-1965 diluted bitumen
MSZ 1584/4-1981 dilute melting agent
MNOSZ 19958-1955 Sampling and inspection of diluted bitumen
MSZ 1584/7-1979 Diluted synthetic industrial melting agent
MSZ 1584/2-1981 Dilute industrial melting agent properties
MSZ MI-05 22.660/3-1972 MI-05 22.660/3-72 Manual paint thinning
MSZ 10196/1.lap-1962 Viscosity detection of plastics in diluent
MSZ 11073-1962 to dilute mineral acid and lye solutions

Standard Association of Australia （SAA）

AS 2157:1978 Cutback bitumen
AS 2157:1980 Cutback bitumen
INT 29-1948 Thinner for Primer, Metal, Zinc Chromate

TH-TISI

TIS 865-2001 Cut.back asphalt
TIS 1318-2009 Retarded thinner
TIS 496-2010 Lacquer thinner
TIS 496-1983(en) LACQUER THINNER
TIS 520-2010 Nitrocellulose lacquer thinner
TIS 520(1)-1984(en) AUTOMOTIVE NITROCELLULOSE LACQUER THINNER

CZ-CSN

CSN 67 3150 Cast.03-1975 Dilulion ability
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 67 5811-1980 Thiímer H 6000 for paints
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 65 7205-1977 Cut - back aaphalts for roads
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 65 1171-1986 Diluted phosphoric acid for industrial use
CSN 67 5833-1980 Thinner S 6019 for paints
CSN 67 5817-1980 Thinner C 6013 for paints
CSN 67 5816-1980 Thinncr C 6004 for paints
CSN 67 5813-1980 Thinner C 6001 forpaints
CSN 67 5819-1980 Thinner L 6000 for paints
CSN 67 5831-1980 Thinner S 6QI4 for pninls
CSN 67 5818-1980 Thinner C 6020 forpaints
CSN 67 5840-1980 Thínner S 6904 for paints
CSN 67 5836-1980 Thinner S 6301 for painls
CSN 67 5842-1980 Thinner U 6002 f o palnts
CSN 67 5815-1980 Thinner C 6003 for paints
CSN 67 5835-1980 Thinner S 6300 forpainls
CSN 67 5830-1980 Thinner S 6013 forpaínls
CSN 67 5828-1980 Thinner S 60O9 for paints
CSN 67 5838-1980 Thinner S 6706 for paimts
CSN 67 5841-1980 Thinner U 6000 for paints
CSN 67 5810-1980 Thlnner B 6000 for aints
CSN 67 5837-1980 Thinner S 6302 for painLs
CSN 67 5827-1980 Thinner S 60Ofi fnrpnints
CSN 67 5826-1980 Thinner S 6007 for painls
CSN 67 5812-1980 Thinner C 6000 for paints
CSN ON 67 5450-1964 Thinner for ehlorinated rubber paints
CSN 65 7079-1983 Test for volatility of cut-back asphalts
CSN ON 67 3650-1961 Thinner 6000 for oil paints
CSN 67 5251-1959 Thinner. L6001 for paint L 1002
CSN 65 7083-1981 Distillation of Cut - Back asphaltic /bítuminous/ products
CSN 67 4701-1960 Speciál thinner C 6001 for itrocellulose paints
CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution
CSN 67 5801-1980 Thinn-ers for paínts. asic and generál equirements
CSN 67 4255-1961 Thinner S 6005 for synthetic painta for ight metala
CSN 67 4254-1960 Thinner S 6004 for paints S 1004 nd S 2016

Korean Agency for Technology and Standards (KATS)

KS M 2202-2021 Cutback asphalt
KS M 2202-2016(2021) Cutback asphalt
KS M 2202-2016 Cutback asphalt
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5803-1983 Thinner for Primer paint
KS M 6060-2005 Thinner for organic coating materials
KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
KS M 6060-2019 Thinner for organic coating materials
KS M 6060-2024 Thinner for organic coating materials
KS M 2212-2011 Corrosion preventive oils solvent dilution
KS M 6060-2014 Thinner for organic coating materials
KS M 2212-2022 Solvent dilution type rust preventive oils
KS M 2212-2016 Corrosion preventive oils solvent dilution
KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 6060-2014(2024) Thinner for organic coating materials
KS M 5801-1983 Thinner for synthetic resin enamel
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 5802-1983 Thinner for Cashew resin Enamel
KS M 6060-2009 Thinner for organic coating materials
KS M 6060-2014(2019) Thinner for organic coating materials
KS M 0120-2024 General rule for dilution methods of standard solutions
KS M 5723-1997(2002) THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-1997 THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-2004 THINNER FOR ACRYL RESIN ENAMEL
KS M 5468-1984 Test methods for dilution of components in lacquer
KS M 2257-2007(2022) Testing method for distillation of cut-back asphaltic products
KS M 2257-2022 Testing method for distillation of cut-back asphaltic products
KS M 2257-1982 Testing method for distillation of cut-back asphaltic products
KS B ISO 8655-4-2017 Piston-operated volumetric apparatus － Part 4: Dilutors
KS B ISO 8655-4:2017 Piston-operated volumetric apparatus－Part 4：Dilutors
KS M 2110-1986 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
KS M 5553-1984 Test methods for ester keton contents of Thinner for lacquer
KS B ISO 8655-4-2017(2022) Piston-operated volumetric apparatus－Part 4：Dilutors
KS M 2110-2011 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine

Society of Automotive Engineers (SAE)

SAE AMS3170F-2005 THINNER Alcohol-Ester
SAE AMS3170E-1995 THINNER Alcohol-Ester
SAE AMS3170C Thinner, Alcohol-Ester
SAE AMS3170 Thinner, Alcohol-Ester
SAE AMS3170D-1978 THINNER Alcohol-Ester
SAE AMS3170F Thinner Alcohol-Ester
SAE AMS3170G-2008 Thinner@ Alcohol-Ester
SAE AMS3170D Thinner, Alcohol-Ester
SAE AMS3170A Thinner, Alcohol-Ester
SAE AMS3170E Thinner, Alcohol-Ester
SAE AMS3170B Thinner, Alcohol-Ester
SAE AMS3170G Thinner, Alcohol-Ester
SAE AMS3170C-1968 THINNER Alcohol - Ester
SAE AMS3170B-1953 THINNER Alcohol - Ester
SAE AMS3170-1948 THINNER Alcohol - Ester
SAE AMS3170A-1952 THINNER Alcohol - Ester
SAE AMS3180-1940 TOLUENE THINNER Commercial
SAE AMS3180B-1952 TOLUENE THINNER Commercial
SAE AMS3170F-1996 Thinner Alcohol-Ester
SAE AMS3180A-1947 TOLUENE THINNER Commercial
SAE AMS3180C-1963 TOLUENE THINNER Commercial
SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning
SAE AMS3430 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430A Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430B-1994 BRAZING FILLER METAL, PASTE, COPPER Water Thinning
SAE AMS3430E Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430D Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430C Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430B Brazing Filler Metal, Paste, Copper, Water Thinning

United States Navy

NAVY TT-T-2935-2000 THINNER, PURGING
NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
NAVY AN6004 REV 4-1971 REGULATOR - DILUTER DEMAND OXYGEN
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY MS22062 REV F NOTICE 1-1997 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY MS22062 REV F-1991 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
NAVY MIL-R-25410 G-1991 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY QPL-16173-84 NOTICE 1-2008 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-QPD-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-QPD-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY MIL-R-25410 G NOTICE 1-1997 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY QPL-16173-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-2012 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
NAVY QPL-16173-QPD-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION

Japanese Industrial Standards Committee (JISC)

JIS K 5538:2002 Lacquer thinner
JIS K 5538:1995 Lacquer thinner

PL-PKN

PN BN 6016-11-1966 Thinner. Ammonium sulfate
PN BN 6118-13-1964 Aurit paint thinner
PN BN 6118-20-1966 reactive pigment diluent
PN BN 6118-16-1965 121 BT/01 paint thinner
PN BN 6110-10-1964 Paint thinner. Sample selection
PN BN 6118-22-1966 Epoxy coating product thinner
PN BN 6118-10-1963 Chlorinated rubber product thinner
PN BN 6118-21-1966 Epoxy asphalt product thinner
PN BN 6118-03-1963 Ethylene polymer product thinner
PN BN 6118-04-1963 Paint MN-16 and TN-16 thinner
PN BN 6118-19-1966 Styrenic Paint Product Thinner
PN BN 6110-14-1965 Paint thinner. Ingredients and labeling
PN BN 6118-15-1965 Thermal Spray Nitrocellulose Paint Thinner
PN BN 6118-07-1963 Universal nitrocellulose product thinner
PN BN 6118-05-1963 Nitrocellulose Product Thinner No. 647
PN BN 6118-11-1963 Chemically hardened coating product thinners
PN BN 6118-09-1963 Asphalt paint and asphalt paint thinner
PN BN 6118-01-1963 Nitrocellulose Paint Thinner for Skin

CH-SNV

SEV 3064-1965 dilution. quality regulations
SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery
VSM 12008-1972 mineral oil. Lubricating oil diluted with gasoline

Canadian General Standards Board （CGSB)

CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
CAN/CGSB-1.70-1999 High-Solvency Thinner
CAN/CGSB-1.4-1992 Thinner, mineral spirits
CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve
CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
CAN/CGSB 1.4-2000 Diluant, essence minerale
CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
CGSB 1.124-99-CAN/CGSB-1999 Thinner for Vinyl Coatings
CAN/CGSB 1.70-1999 Thinner with high solvent power
CAN/CGSB-1.124-1993 Thinner for Vinyl Coatings
CAN/CGSB 1.94-M89-1989 Thinner, xylene (xylol)
CAN/CGSB-1.5-M91-1991 Low Flash Petroleum Spirits Thinner
CAN/CGSB-1.94-M89-1989 Thinner, xylene (xylol)
CAN/CGSB-1.124-1999 Thinner for vinyl resin coatings
CAN/CGSB 1.124-1999 Diluant pour revetements aux resines vinyliques
CAN/CGSB 1.110-M91-1991 Thinner for general use, for lacquer products

GM Europe

GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
GME B 040 0394-2011 Cleaning thinner for spray booths
GME L 000 0545-2004 Varnish Thinner A-II
GME B 040 0227-2010 Cleaning and rinsing thinner
GME B 040 1514-2010 Flushing and cleaning thinner
GME B 440 0225-2013 Thinner for top and clearcoats (English/German)
GME B 040 1501-2014 Thinner for Spot-Repair (English/German)
GME B 040 0980-2003 Dilute wetting agent (English/German)
GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)
GME L 000 0537-2008 Thinner for 2-component clear coat
GME L 000 0570-2013 Thinner for metaleffect base coat (English/German)

Aerospace Industries Association

AIA NAS1616 Topcoat, Water Reducible
AIA NAS1617 Coating: High Temperature Resistant, Water Reducible
AIA NAS1615 Primer Coating Water Reducible, Corrosion Inhibiting
AIA NAS 1616-1981 (Inactive)Topcoat, Water Reducible (Rev. 1)

IN-BIS

IS 217-1961 Specification for diluted bitumen
IS 454-1961 Specification for DIGBOI type diluted bitumen

IL-SII

S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS

GM Holden Ltd

HOLDEN HN 1057-2001 Kaylo Thinner No. 300
HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating

American Society for Testing and Materials (ASTM)

ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2399-83(2005) Standard Practice for Selection of Cutback Asphalts
ASTM D2399-83(1999) Standard Practice for Selection of Cutback Asphalts
ASTM D597-46 Specification for Cut-Back Asphalt (Rapid Curing Type)
ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM E788-97(2024) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2019) Standard Specification for Pipet, Blood Diluting
ASTM D2028-97 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97 Standard Specification for Pipet, Blood Diluting
ASTM D2028-97(2004) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97(2003) Standard Specification for Pipet, Blood Diluting
ASTM D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2399-12 Standard Practice for Selection of Cutback Asphalts
ASTM D402/D402M-24 Standard Test Method for Distillation of Cutback Asphalt
ASTM D2027/D2027M-19(2024) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2399-21 Standard Practice for Selection of Cutback Asphalts

Spanish Association for Standardization (UNE)

AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
AENOR UNE 48085:1985 Water in solvents and diluents.
UNE 48-085-1985 Water in solvents and diluents
UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
UNE 48097:2001 Paints and varnishes. Dilution stability.
UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
UNE-EN 14733:2006+A1:2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
UNE 48057:1960 CORROSION TEST, OF SOLVENTS AND DILUENTS
UNE 48 057 Corrosion testing of solvents and diluents
UNE 7149:1959 MODIFIED MIXIBILITY TEST OF WATER CUTBACKS.
UNE-EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
AENOR UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesion of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE 30 148 Analytical reagents. Perchloric acid (diluted to 70%) CI04HM 100,46
AENOR UNE 41106:1970 Fluidized bitumens ("cut-back") of the rapid curing type.
UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE 7148:1959 MIXIBILITY TEST OF WATER AND COAGULATION CUTBACKS.

BR-ABNT

ABNT EB-96R-1956 alkyd enamel thinner
ABNT MB-230R-1956 Alkyd enamel diluent testing
ABNT EB-33-1945 Dilute lead chrome green. Brazilian specifications
ABNT EB-99-1968 Diluted asphalt concrete and residual oil
ABNT NBR 5765-2012 Diluted asphalt — Determinations of flashpoint — Tag open cup

Military Standards (MIL-STD)

DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING
DOD A-A-54126-1990 PIPET-DILUENT, BLOOD, LABORATORY
MIL MIL-T-81772B-1986 THINNER, AIRCRAFT COATING (SUPERSEDING MIL-T-81772A)

GM North America

GM 9985231-1973 Copper Brazing Paste, Water Thinning
GM 9984478-1997 Purge Thinner - for Enamels
GM 9984036-1990 Purge Thinner - Reclaimed
GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel
GM 9984431-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984466-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984454-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984462-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984500-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984424-1990 Thinner - Evaporation Loss for Solution Lacquer
GM 9984464-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984494-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984430-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984495-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984493-1989 Purge Thinner for 9984111 Replaced by 9984478
GM 9984436-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984499-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984497-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9985784-2014 Lubricant, Rubber (Nonwater Dilutable) (Issue 2)
GM 9985784-1993 Lubricant, Rubber (Nonwater Dilutable)

Association Francaise de Normalisation

NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
NF B35-206:1968 Laboratory glassware. Dilution pipettes.

AR-IRAM

IRAM 6608-1959 Fast hardening diluted asphalt
IRAM 6610-1959 Medium speed hardening diluted asphalt
IRAM 6612-1959 Low speed hardening diluted asphalt
IRAM 6595-1956 Distillation test method for diluted bitumen

German Institute for Standardization

DIN 12838:2021 Dilution pipette, Demeter type 1,1
DIN 12839:2021 Dilution pipette, Demeter type 2,2
DIN 12838:2021-08 Dilution pipette, Demeter type 1,1
DIN 12839:2021-08 Dilution pipette, Demeter type 2,2
DIN 12838:1964-03 Dilution pipette, Demeter type 1.1
DIN 12838 E:2020-12 Dilution pipette, Demeter type 1.1
DIN 32677 E:2023-12 Draft Document - Dispense systems for draught beverages - Connectors to taps of dispense systems for draught beverages
DIN 12839 E:2020-12 Dilution pipette, Demeter type 2.2
DIN 12839:1964-11 Pipette, Dilution, Demeter Type 2.2
DIN 12839:1964 Dilution pipette, Demeter type 2.2
DIN 12838:1964 Dilution pipette, Demeter type 1.1
DIN 12838:2020-12 Draft Document - Dilution pipette, Demeter type 1.1
DIN 12839:2020-12 Draft Document - Dilution pipette, Demeter type 2.2
DIN 12839 E:2020 Draft Document - Dilution pipette, Demeter type 2.2
DIN 53238-24:1995 Pigments and extenders - Method for assessment of ease of dispersion - Part 24: Microscopic assessment of dispersions of pigments and extenders
DIN 12838 E:2020 Draft Document - Dilution pipette, Demeter type 1.1
DIN 12750:1969 Blood dilution pipettes for blood corpuscles counting
DIN EN 15626:2016-09 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method; German version EN 15626:2016

GM Daewoo

GMKOREA EDS-M-8718-2007 ESTA CLEANING THINNER (VERSION: 4)
GMKOREA EDS-T-7680-2011 Solubility test of sound insulation pad diluent

YU-JUS

JUS H.P8.514-1986 Testing of pesticides DETERMINATION OF STABILITY AFTER DILUTION
JUS U.M3.030-1996 Cutback asphalts for roads - Quality reguirements

Defense Logistics Agency

DLA DD-B-601-1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS

British Standards Institution (BSI)

BS 5082:1974 Specification for water-thinned priming paints for wood
BS EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Dilutors
BS EN ISO 8655-4:2002 Piston-operated volumetric apparatus - Part 4:Dilutors
BS EN 15626:2016 Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method

Standards Norway

NS 4749:1979 Biological oxygen demand, BOD — Dilution method
NS-EN 14733:2005 Bitumen and bituminous binders — Bituminous emulsions, fluxed and cut-back bitumen factory production control
NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
NS-EN 15626:2016 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
NS-EN 14896:2006 Bitumen and bituminous binders — Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders — Rotating spindle viscometer method

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1616-1981 Topcoat@ Water Reducible (Rev 1)
NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)

U.S. Military Regulations and Norms

ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY A-A-857 B VALID NOTICE 2-2009 Thinner, Dope and Lacquer (Cellulose Nitrate)

Bureau of Indian Standards

IS 454-1994 Cutback bitumen from waxy crude
IS 217-2018 Cutback Bitumen —— Specification ( Third Revision )
IS 14314-1995 Thinner General Purposes For Synthetic Paints And Varnishes

Indonesia Standards

SNI 06-6018-1999 Test method for gasoline diluent in used gasoline engine oils by distilation

NL-NEN

NEN 3905-1982 Bitumen and tar products - Cut-back bitumen

US-CFR-file

CFR 40-1065.240-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.240:Dilution air and diluted exhaust flow meters.

RO-ASRO

STAS 3122-1980 Paints and varnishes. THINNERS FOR NITROCELLULOSE ASE PRODUCTS
STAS 3123-1985 VABNISHES AND PAINTS Thinners for alkyde resin base products
STAS 3122-1985 VARNISHES AND PAINTS Thinners for nitrocellulose base preducts
STAS 52-1980 PETROLEUM DIEUENTS FOR T1M- BER PRESERVATION IMPREGNATES

General Motors Corporation (GM)

GM 9985555-1989 Lubricant, Tire Mounting, Prediluted

Gosstandart of Russia

GOST 20909.1-1975 Non-diluted sperm of bulls. Method of sampling
GOST 32057-2013 Cutback bituminous products. Determination of distillation characteristics
GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions

The American Road & Transportation Builders Association

AASHTO M 82-2017 Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 82-1975(2012) Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 82-2017(2021) Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 81-92(R2017) Standard Specification for Cutback Asphalt (Rapid-Curing Type)

TR-TSE

TS 122-1978 STANDARD METHOD OF DISTILLATION TEST FOR CUT-BACK ASPHALTIC PRODUCTS

CU-NC

NC 26-150-1986 Veterinary Drugs Glyoerate Diluent Teatine Methods
NC 26-75-44-1990 Drugs. Diluent Sauton Injection. Quality Süecifications

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 8655-4:2024 Piston-operated volumetric apparatus — Part 4: Dilutors

International Organization for Standardization (ISO)

ISO 8655-4:2022 Piston-operated volumetric apparatus — Part 4: Dilutors

Danish Standards Foundation

DANSK DS/EN 15626:2016 Bitumen and bituminous binders – Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test – Aggregate method

AASHTO - American Association of State Highway and Transportation Officials

M82-1975 Standard Specification for Cut-Back Asphalt (Medium-Curing Type)
M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)

Swedish Institute for Standards

ASTM D2027-04 Standard Specification for Cutback Asphalt (Medium-Curing Type)

US-GSA

GSA A-A-857 B VALID NOTICE 1-2004 THINNER, DOPE AND LACQUER (CELLULOSE NITRATE)