water dilution

water dilution, Total:376 items.

The international standard classification for "water dilution" includes: Paints and varnishes , Solvents , Radiation measurements , Water quality .

The Chinese standard classification for "water dilution" includes: Coating , Coating auxiliary materials , Ionizating Radiation Measurement , Analysis methods for toxic substances in water .

Professional Standard - Medicine

YY 91104-1999 Diluter

Professional Standard - Environmental Protection

HJ 1182-2021 Water quality—Determination of colority—Dilution level method
HJ 505-2009 Water Quality - Determination of Biochemical Oxygen Demand after 5 Days (BOD5) for Dilution and Seeding Method

Taiwan Provincial Standard of the People's Republic of China

CNS 10447-1983 Solvent Diluted Pust Preventive Oil
CNS 3233-1980 Dope Thinner
CNS 886-1986 Method of Test for Lacquer Thinner
CNS 554-1986 Lacquer Thinner

Group Standards of the People's Republic of China

T/QGCML 3904-2024 Mixing and diluting device for shampoo production
T/HEBQIA 062-2022 Alkyd thinner
T/CASME 1483-2024 Specification for the use of diluents of poultry semen
T/CASME 1654-2024 Thinner for printing ink
T/QGCML 3254-2024 Mixing device for diluent processing
T/CEMIA 019-2019 Thinner for display panels
T/HEBQIA 114-2022 Alkyd thinner

工业和信息化部

HG/T 3378-2022 Thinner for coatings

Professional Standard - Chemical Industry

HG/T 3380-1987 Thiner for amino paint
HG/T 3380-2003 Thiner for amino paint
HG/T 3860-2006 Method of test for evaporation rate of thinners and anti - Blushing agents
HG/T 3378-1987 Thinner For Nitrocellulose Lacquer
HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents
HG/T 3379-1987 Thinner For Chlorinated Polyvinyl Chloride Paints
HG/T 3859-2006 Method for blushing test of thinners and anti - Blushing agents
HG/T 3379-2003 Thiner for Perchlorvinyl Paint
HG/T 3378-2003 Thiner for nitrocellulose lacquer
HG/T 3858-2006 Determination of water of thinners and retarders

National Metrological Technical Specifications of the People's Republic of China

JJF 2066-2023 Calibration Specification for Aerosol Diluters
JJF 1267-2010 Primary method of isotope dilution mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7488-1987 Water quality; Determination of biochemical oxygen demand after 5 days(BOD5); Dilution and seeding method
GB 7488-1987 Dilution and inoculation method for determination of five-day biochemical oxygen demand (BOD5) in water quality
GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents
GB/T 1751-1992 Determination of water of thinners and retarders

中国石油化工总公司

SH 0354-1992 Solvent-diluted anti-rust oil

Professional Standard - Speciality

ZB G52002-1987 X-3 perchlorethylene paint thinner
ZB G52001-1987 X-1, X-2 nitro lacquer thinner
ZB G52003-1987 X-4 amino paint thinner

Henan Provincial Standard of the People's Republic of China

DB41/T 507-2017 7 Limits of harmful substances in alkyd paint thinner

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2508-2022 Cashmere Goat Fresh Essence Diluent Formula

National Metrological Verification Regulations of the People's Republic of China

JJG 2096-2017 Concentration of Element Based on Isotope Dilution Mass Spectrometry

Professional Standard - Petroleum

SY/T 0532-2012 Analysis Method of the Bacteria for Oilfield Injecting Water. Disappearing Dilution Method
SY/T 0532-1993 Bacteria analysis method for oil field injection water extinction dilution method
SY 0532-2012 Bacteria analysis method for oil field injection water extinction dilution method

Professional Standard - Urban Construction

CJ/T 3018.2-1993 Leachate -- determination of colority -- multiple dilution method

CH-SNV

SEV 3064-1965 dilution. quality regulations
SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery

(U.S.) Ford Automotive Standards

FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
FORD SK-M14J9561-A-1995 THINNER
FORD ESK-M14J512-A1-1988 THINNER
FORD SK-M14J9550-C-1994 THINNER
FORD SK-M14J9573-B-1994 THINNER
FORD S-M14J4500-A-1994 THINNER
FORD S-M14J210-A-1994 THINNER
FORD ESK-M14J233-A-1994 THINNER
FORD SK-M14J9571-A-1994 THINNER
FORD SK-M14J9571-B-1994 THINNER
FORD WSK-M14J243-A-1990 THINNER
FORD ESK-M14J250-A-1990 THINNER
FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
FORD WSS-M14J519-A-1998 FADE OUT THINNER
FORD WSS-M14J521-A1-1998 PRIMER THINNER
FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
FORD WSS-M14J520-A-1998 RETARDER THINNER
FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS
FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)

HU-MSZT

MSZ 7480-1961 Thinner
MSZ 09 80 015-1972 paint thinner
MSZ 8576-1959 fat thinner
MSZ 3268-1965 diluted bitumen
MSZ 1584/2-1981 Dilute industrial melting agent properties
MSZ 1584/4-1981 dilute melting agent
MNOSZ 19958-1955 Sampling and inspection of diluted bitumen
MSZ 1584/7-1979 Diluted synthetic industrial melting agent
MSZ MI-05 22.660/3-1972 MI-05 22.660/3-72 Manual paint thinning

GM North America

GM 9985231-1973 Copper Brazing Paste, Water Thinning
GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel
GM 9985784-2014 Lubricant, Rubber (Nonwater Dilutable) (Issue 2)
GM 9985784-1993 Lubricant, Rubber (Nonwater Dilutable)
GM 9984478-1997 Purge Thinner - for Enamels
GM 9984036-1990 Purge Thinner - Reclaimed
GM 9984431-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984454-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984430-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984495-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984466-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984424-1990 Thinner - Evaporation Loss for Solution Lacquer
GM 9984464-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984462-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984500-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984493-1989 Purge Thinner for 9984111 Replaced by 9984478
GM 9984494-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984497-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984436-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984499-1990 Reducing Solvents for Primers (Shown on 9984446)

TH-TISI

TIS 865-2001 Cut.back asphalt
TIS 1318-2009 Retarded thinner
TIS 496-2010 Lacquer thinner
TIS 496-1983(en) LACQUER THINNER
TIS 520-2010 Nitrocellulose lacquer thinner
TIS 520(1)-1984(en) AUTOMOTIVE NITROCELLULOSE LACQUER THINNER

Standard Association of Australia （SAA）

AS 2157:1978 Cutback bitumen
AS 2157:1980 Cutback bitumen
AS 4276.2:1995(R2013) Water microbiology media, diluents and reagents
AS 4276.2:1995 Water microbiology - Culture media, diluents and reagents

SAE - SAE International

SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
SAE AMS3170G-2008 Thinner@ Alcohol-Ester
SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning

Korean Agency for Technology and Standards (KATS)

KS M 2202-2021 Cutback asphalt
KS M 2202-2016(2021) Cutback asphalt
KS M 2202-2016 Cutback asphalt
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5803-1983 Thinner for Primer paint
KS M 6060-2005 Thinner for organic coating materials
KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
KS M 6060-2019 Thinner for organic coating materials
KS M 2212-2011 Corrosion preventive oils solvent dilution
KS M 6060-2014 Thinner for organic coating materials
KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 2212-2016 Corrosion preventive oils solvent dilution
KS M 9137-2005 Water quality－Determination of biochemical oxygen demandafter 5 days(BOD5)(Dilution and seeding)
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 5801-1983 Thinner for synthetic resin enamel
KS M 5802-1983 Thinner for Cashew resin Enamel
KS M 6060-2009 Thinner for organic coating materials
KS M 6060-2014(2019) Thinner for organic coating materials
KS M 9137-2002 Water quality－Determination of biochemical oxygen demandafter 5 days(BOD5)(Dilution and seeding)
KS M 5723-1997(2002) THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-1997 THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-2004 THINNER FOR ACRYL RESIN ENAMEL
KS M 5468-1984 Test methods for dilution of components in lacquer
KS M 2257-2007(2022) Testing method for distillation of cut-back asphaltic products
KS M 2257-2022 Testing method for distillation of cut-back asphaltic products
KS M 2257-1982 Testing method for distillation of cut-back asphaltic products

CZ-CSN

CSN 67 3150 Cast.03-1975 Dilulion ability
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 67 5811-1980 Thiímer H 6000 for paints
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 65 7205-1977 Cut - back aaphalts for roads
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 65 1171-1986 Diluted phosphoric acid for industrial use
CSN 67 5833-1980 Thinner S 6019 for paints
CSN 67 5817-1980 Thinner C 6013 for paints
CSN 67 5819-1980 Thinner L 6000 for paints
CSN 67 5838-1980 Thinner S 6706 for paimts
CSN 67 5841-1980 Thinner U 6000 for paints
CSN 67 5816-1980 Thinncr C 6004 for paints
CSN 67 5813-1980 Thinner C 6001 forpaints
CSN 67 5836-1980 Thinner S 6301 for painls
CSN 67 5840-1980 Thínner S 6904 for paints
CSN 67 5831-1980 Thinner S 6QI4 for pninls
CSN 67 5818-1980 Thinner C 6020 forpaints
CSN 67 5828-1980 Thinner S 60O9 for paints
CSN 67 5842-1980 Thinner U 6002 f o palnts
CSN 67 5835-1980 Thinner S 6300 forpainls
CSN 67 5830-1980 Thinner S 6013 forpaínls
CSN 67 5815-1980 Thinner C 6003 for paints
CSN 67 5810-1980 Thlnner B 6000 for aints
CSN 67 5837-1980 Thinner S 6302 for painLs
CSN 67 5827-1980 Thinner S 60Ofi fnrpnints
CSN 67 5826-1980 Thinner S 6007 for painls
CSN 67 5812-1980 Thinner C 6000 for paints
CSN ON 67 5450-1964 Thinner for ehlorinated rubber paints
CSN 65 7079-1983 Test for volatility of cut-back asphalts
CSN ON 67 3650-1961 Thinner 6000 for oil paints
CSN 67 5251-1959 Thinner. L6001 for paint L 1002
CSN 65 7083-1981 Distillation of Cut - Back asphaltic /bítuminous/ products
CSN 67 4701-1960 Speciál thinner C 6001 for itrocellulose paints

Society of Automotive Engineers (SAE)

SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3170F-2005 THINNER Alcohol-Ester
SAE AMS3170E-1995 THINNER Alcohol-Ester
SAE AMS3170D-1978 THINNER Alcohol-Ester
SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3170B-1953 THINNER Alcohol - Ester
SAE AMS3170C-1968 THINNER Alcohol - Ester
SAE AMS3170-1948 THINNER Alcohol - Ester
SAE AMS3170A-1952 THINNER Alcohol - Ester
SAE AMS3180B-1952 TOLUENE THINNER Commercial
SAE AMS3180-1940 TOLUENE THINNER Commercial
SAE AMS3180A-1947 TOLUENE THINNER Commercial
SAE AMS3170F-1996 Thinner Alcohol-Ester
SAE AMS3180C-1963 TOLUENE THINNER Commercial
SAE AMS3430B-1994 BRAZING FILLER METAL, PASTE, COPPER Water Thinning

Association Francaise de Normalisation

NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
NF T60-195:1993 Fluides d'usinage aqueux - Opacité à l'état dilué
NF B35-206:1968 Laboratory glassware. Dilution pipettes.

SCC

BS 5082:1974 Specification for water-thinned priming paints for wood
AENOR UNE 48085:1985 Water in solvents and diluents.
CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
CAN/CGSB-1.70-1999 High-Solvency Thinner
HOLDEN HN 1057-2001 Kaylo Thinner No. 300
CAN/CGSB-1.4-1992 Thinner, mineral spirits
AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating
CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
CAN/CGSB 1.4-2000 Diluant, essence minerale
CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
CAN/CGSB 1.124-1999 Diluant pour revetements aux resines vinyliques
CAN/CGSB-1.124-1993 Thinner for Vinyl Coatings
CAN/CGSB 1.70-1999 Thinner with high solvent power
NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
CAN/CGSB 1.94-M89-1989 Thinner, xylene (xylol)
CAN/CGSB-1.5-M91-1991 Low Flash Petroleum Spirits Thinner
NS-EN 15626:2016 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
CAN/CGSB-1.94-M89-1989 Thinner, xylene (xylol)
NS 4749:1979 Biological oxygen demand, BOD — Dilution method
CAN/CGSB-37.16-M89-1989 Filled, Cutback Asphalt for Dampproofing and Waterproofing
DANSK DS/EN 15626:2016 Bitumen and bituminous binders – Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test – Aggregate method
AENOR UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesion of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
CAN/CGSB-1.124-1999 Thinner for vinyl resin coatings
NS-EN 14733:2005 Bitumen and bituminous binders — Bituminous emulsions, fluxed and cut-back bitumen factory production control
INT 29-1948 Thinner for Primer, Metal, Zinc Chromate
MIL MIL-W-71125-1992 WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE (S/S BY A-A-59276)
ASTM D597-46 Specification for Cut-Back Asphalt (Rapid Curing Type)
MIL MIL-T-81772B-1986 THINNER, AIRCRAFT COATING (SUPERSEDING MIL-T-81772A)
AWWA JAW18893 Journal AWWA — Using Isotope Dilution Mass Spectrometry to Determine Aqueous Trichloroacetic Acid
DIN 12839 E:2020 Draft Document - Dilution pipette, Demeter type 2.2
DIN 12838 E:2020 Draft Document - Dilution pipette, Demeter type 1.1
AASHTO M 82-1975(2012) Standard Specification for Cutback Asphalt (Medium-Curing Type)

United States Navy

NAVY TT-T-2935-2000 THINNER, PURGING
NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
NAVY AN6004 REV 4-1971 REGULATOR - DILUTER DEMAND OXYGEN
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY MS22062 REV F-1991 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
NAVY MS22062 REV F NOTICE 1-1997 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING

Spanish Association for Standardization (UNE)

UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
UNE 48-085-1985 Water in solvents and diluents
UNE 7149:1959 MODIFIED MIXIBILITY TEST OF WATER CUTBACKS.
UNE 7148:1959 MIXIBILITY TEST OF WATER AND COAGULATION CUTBACKS.
UNE 48 055 Enamel thinners and ketones in nitrocellulose varnishes
UNE-EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE 48097:2001 Paints and varnishes. Dilution stability.
UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
UNE-EN 14733:2006+A1:2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE 48 056 Enamel thinners and esters in nitrocellulose varnishes
UNE 48 052 Enamel thinner and ethanol in nitrocellulose varnish
UNE 48057:1960 CORROSION TEST, OF SOLVENTS AND DILUENTS
UNE 48 057 Corrosion testing of solvents and diluents

Japanese Industrial Standards Committee (JISC)

JIS K 5538:2002 Lacquer thinner
JIS K 5538:1995 Lacquer thinner
JIS K 0400-21-10:1999 Water quality -- Determination of biochemical oxygen demand after 5 days (BOD5) -- Dilution and seeding method

GM Europe

GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)
GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
GME B 040 0394-2011 Cleaning thinner for spray booths
GME L 000 0545-2004 Varnish Thinner A-II
GME B 440 0225-2013 Thinner for top and clearcoats (English/German)
GME B 040 1501-2014 Thinner for Spot-Repair (English/German)
GME B 040 0227-2010 Cleaning and rinsing thinner
GME B 040 1514-2010 Flushing and cleaning thinner
GME B 040 0980-2003 Dilute wetting agent (English/German)
GME L 000 0537-2008 Thinner for 2-component clear coat

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1616-1981 Topcoat@ Water Reducible (Rev 1)
NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)
NAS1615-1981 Primer Coating Water Reducible@ Corrosion Inhibiting (Rev 2)

U.S. Military Regulations and Norms

ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY QPL-53030-QPD-2012 Primer Coating, Epoxy, Water Reducible, Lead and Chromate Free
ARMY A-A-857 B VALID NOTICE 2-2009 Thinner, Dope and Lacquer (Cellulose Nitrate)

PL-PKN

PN BN 6016-11-1966 Thinner. Ammonium sulfate
PN BN 6118-13-1964 Aurit paint thinner
PN BN 6118-20-1966 reactive pigment diluent
PN BN 6118-16-1965 121 BT/01 paint thinner
PN BN 6110-10-1964 Paint thinner. Sample selection
PN BN 6118-10-1963 Chlorinated rubber product thinner
PN BN 6118-21-1966 Epoxy asphalt product thinner
PN BN 6118-22-1966 Epoxy coating product thinner
PN BN 6118-04-1963 Paint MN-16 and TN-16 thinner
PN BN 6118-19-1966 Styrenic Paint Product Thinner
PN BN 6118-03-1963 Ethylene polymer product thinner
PN BN 6110-14-1965 Paint thinner. Ingredients and labeling
PN BN 6118-15-1965 Thermal Spray Nitrocellulose Paint Thinner
PN BN 6118-07-1963 Universal nitrocellulose product thinner
PN BN 6118-05-1963 Nitrocellulose Product Thinner No. 647
PN BN 6118-11-1963 Chemically hardened coating product thinners
PN BN 6118-09-1963 Asphalt paint and asphalt paint thinner
PN BN 6118-01-1963 Nitrocellulose Paint Thinner for Skin

IN-BIS

IS 217-1961 Specification for diluted bitumen
IS 454-1961 Specification for DIGBOI type diluted bitumen

IL-SII

S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS

YU-JUS

JUS U.M3.030-1996 Cutback asphalts for roads - Quality reguirements
JUS H.P8.514-1986 Testing of pesticide?. Dilution stability

American Society for Testing and Materials (ASTM)

ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2399-83(2005) Standard Practice for Selection of Cutback Asphalts
ASTM D2399-83(1999) Standard Practice for Selection of Cutback Asphalts
ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting
ASTM D2028-97 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97(2019) Standard Specification for Pipet, Blood Diluting

BR-ABNT

ABNT EB-96R-1956 alkyd enamel thinner
ABNT MB-230R-1956 Alkyd enamel diluent testing
ABNT EB-33-1945 Dilute lead chrome green. Brazilian specifications
ABNT EB-99-1968 Diluted asphalt concrete and residual oil

Canadian General Standards Board （CGSB)

CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve
CGSB 1.124-99-CAN/CGSB-1999 Thinner for Vinyl Coatings

Military Standards (MIL-STD)

DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING
DOD A-A-54126-1990 PIPET-DILUENT, BLOOD, LABORATORY

AR-IRAM

IRAM 6608-1959 Fast hardening diluted asphalt
IRAM 6610-1959 Medium speed hardening diluted asphalt
IRAM 6612-1959 Low speed hardening diluted asphalt
IRAM 6595-1956 Distillation test method for diluted bitumen

KR-KS

KS M 2212-2022 Solvent dilution type rust preventive oils
KS M 6060-2014(2024) Thinner for organic coating materials

German Institute for Standardization

DIN 12838:2021 Dilution pipette, Demeter type 1,1
DIN 12839:2021 Dilution pipette, Demeter type 2,2
DIN 12839:2021-08 Dilution pipette, Demeter type 2,2
DIN 12838:2021-08 Dilution pipette, Demeter type 1,1
DIN 53770-1:2014 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 1: Preparation of acid extracts
DIN 53770-1:2007 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 1: Preparation of acid extracts
DIN EN 15626:2016-09 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method; German version EN 15626:2016
DIN 12839 E:2020-12 Dilution pipette, Demeter type 2.2
DIN 12838 E:2020-12 Dilution pipette, Demeter type 1.1
DIN 12838:1964 Dilution pipette, Demeter type 1.1
DIN 12839:1964 Dilution pipette, Demeter type 2.2
DIN 12750:1969 Blood dilution pipettes for blood corpuscles counting

CU-NC

NC 26-75-44-1990 Drugs. Diluent Sauton Injection. Quality Süecifications
NC 33-30-1984 Oil and Oil Derivatives. Cutback Asphalts Quality Specifications
NC 26-150-1986 Veterinary Drugs Glyoerate Diluent Teatine Methods

Aerospace Industries Association

AIA NAS 1616-1981 (Inactive)Topcoat, Water Reducible (Rev. 1)
AIA NAS 1617-1981 (Inactive)Coating: High Temperature Resistant, Water Reducible (Rev. 1)

GM Daewoo

GMKOREA EDS-M-8718-2007 ESTA CLEANING THINNER (VERSION: 4)

FI-SFS

SFS 3019-1979 Determine the biochemical oxygen demand in water. dilution method

Defense Logistics Agency

DLA DD-B-601-1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS

International Organization for Standardization (ISO)

ISO 5815:1989 Water quality; determination of biochemical oxygen demand after 5 days (BOD<(Index)5>); dilution and seeding method
ISO 5815:1983 Water quality — Determination of biochemical oxygen demand after n days (BODn) — Dilution and seeding method

ES-AENOR

INTA 16 04 03 Esters in enamel thinners and nitrocellulose paints

British Standards Institution (BSI)

BS EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Dilutors
BS EN 15626:2016 Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method
BS EN 1899-2:1998 Water quality. Determination of biochemical oxygen demand after n days (BODn). Method for undiluted samples
ISO 5815-2:2003 (R08) Ed 1 Water quality. Determination of biochemical oxygen demand after n days (BODn) - Method for Undiluted samples

RU-GOST R

GOST 20909.5-1975 Non-diluted sperm of bulls. Methods for tests of physical properties
GOST 20909.1-1975 Non-diluted sperm of bulls. Method of sampling

Indonesia Standards

SNI 06-6018-1999 Test method for gasoline diluent in used gasoline engine oils by distilation

SE-SIS

SIS SS 02 81 43-1990 Determination of biochemicaloxygen demand, BODi of waste water — Dilution method

NL-NEN

NEN 3905-1982 Bitumen and tar products - Cut-back bitumen

RO-ASRO

STAS 3122-1980 Paints and varnishes. THINNERS FOR NITROCELLULOSE ASE PRODUCTS
STAS 3123-1985 VABNISHES AND PAINTS Thinners for alkyde resin base products

API - American Petroleum Institute

API PUBL 4664-1998 Mixing Zone Modeling and Dilution Analysis for Water-Quality-Based NPDES Permit Limits

GSO

GSO ASTM D61:2009 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

General Motors Corporation (GM)

GM 9985555-1989 Lubricant, Tire Mounting, Prediluted

US-CFR-file

CFR 40-1065.240-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.240:Dilution air and diluted exhaust flow meters.

The American Road & Transportation Builders Association

AASHTO M 82-2017 Standard Specification for Cutback Asphalt (Medium-Curing Type)

TR-TSE

TS 122-1978 STANDARD METHOD OF DISTILLATION TEST FOR CUT-BACK ASPHALTIC PRODUCTS