Austenite Analysis

Austenite Analysis, Total:414 items.

The international standard classification for "Austenite Analysis" includes: Chemical analysis , Corrosion of metals , Irons , Iron and steel castings , Stainless steels , Mechanical testing of metals .

The Chinese standard classification for "Austenite Analysis" includes: Basic standards and general methods , Metal chemical property test method , Casting , Profile steel and deformed steel , Metal mechanical property test method .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39033-2020 Austenitic-ferritic duplex stainless steel wire rods
GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 41076-2021 Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel

Group Standards of the People's Republic of China

T/SSEA 0067-2020 Austenitic-ferritic duplex stainless steel round tube billet
T/HEBQIA 272-2024 Austenitic stainless steel wire
T/CSTM 00827-2023 Ultrasonic testing method for austenitic and austenitic-ferritic steel plates
T/ZZB 0591-2018 Austenitic-Ferritic (duplex) stainless steel bars
T/ZZB 0996-2019 Austenitic manganese steel castings
T/ZZB 1385-2019 Austenitic stainless steel ingots for nuclear power
T/CSTA 0003-2020 Austenitic-Ferritic duplex stainless steel round tube billet for forging and rolling
T/CSTM 00149-2021 Welded high silicon austenitic stainless steel pipes
T/CWAN 0082-2022 Corrosion test method for welded joints and deposited metal of austenitic and ferritic-austenitic duplex stainless steel
T/CISA 368-2024 High manganese austenitic low-temperature steel plates for ship
T/FSMA 002-2018 Cold rolled austenitic stainless steel sheet for decoration

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26648-2011 Austenitic iron castings
GB/T 5680-2010 Austenitic manganese steel castings
GB/T 5680-2023 Austenitic manganese steel castings
GB/T 31303-2014 Austenitic-Ferritic duplex stainless steel bars
GB/T 17600.2-1998 Steel--Conversion of elongation values--Part 2:Austenitic steels

Professional Standard - Agriculture

空气和废气监测分析方法 7.4.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Four Analytical Methods of Source and Receptor Samples Two Analytical Techniques of Source and Receptor Samples
空气和废气监测分析方法 7.4.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 4 Analytical Methods of Source and Receptor Samples—Weighing of Filter

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34475-2017 Urea grade austenitic stainless steel bars
GB/T 36027-2018 Austenitic stainless steel bars for nuclear power plants

Professional Standard - Military and Civilian Products

WJ 1202-1997 Specification for austenitic welding electrodes for armor steel

United States Navy

NAVY A-A-50504-1992 ANALYZERS, FLUE-GAS, ORSAT-TYPE, PORTABLE

SCC

BS ISO 17804:2005 Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification
NS-EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DANSK DS/EN 10222-5:2017 Steel forgings for pressure purposes – Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DIN EN 10222-5 E:2013 Draft Document - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and ferritic-austenitic stainless steels; German version prEN 10222-5:2012
NS-EN 10222-5:1999 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
AENOR UNE-EN 10222-5:2017 Forged steel parts for pressure apparatus. Part 5: Martensitic, austenitic and austeno-ferritic stainless steels.
12/30270650 DC BS EN 10222-5. Steel forgings for pressure purposes. Part 5. Martensitic, austenitic and ferritic-austenitic stainless steels
BS 3468:1986 Specification for austenitic cast iron
BS 3468:1974 Specification for austenitic cast iron
DANSK DS/EN 13835:2012 Founding - Austenitic cast irons
BS 3468:1962 Specification for austenitic cast iron
NS-EN 13835:2002 Founding — Austenitic cast irons
BS 1457:1948 Austenitic manganese steel castings
AENOR UNE-EN 13835:2012 Founding - Austenitic cast irons
NS-EN 13835:2012 Founding — Austenitic cast irons
NS 14240:1984 Stainless steels — Martensitic/austenitic chromium-nickel-molybdenum-steel 14240
NS 1699:1969 Steel castings, austenitic manganese steel
NS-EN 10213-4:1995 Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austentic-ferritic steel grades
DIN EN 13835 E:2009 Draft Document - Founding - Austenitic cast irons; German version prEN 13835:2009
DANSK DS/EN 1564:2012 Founding - Ausferritic spheroidal graphite cast irons
DANSK DS/EN 10228-4:2002 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
NS-EN 10357:2022 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
AENOR UNE-EN 10357:2014 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
NS-EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
NS-EN 1564:1997 Founding — Austempered ductile cast irons
DANSK DS/EN 10253-3:2009 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
NS-EN 10228-4:2016 Non-destructive testing of steel forgings — Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
NS-EN 10228-4:1999 Non-destructive testing of steel forgings — Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
AENOR UNE-EN 10253-3:2010 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
NS-EN 10253-3:2008 Butt-welding pipe fittings — Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
NS-EN 1564:2011 Founding — Ausferritic spheroidal graphite cast irons
DIN EN 10253-4 E:2003 Draft Document - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German version prEN 10253-4:2003
DANSK DS/EN 10357:2014 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
AENOR UNE-EN 10228-4:2016 Non-destructive testing of forged steel parts. Part 4: Ultrasonic testing of austenitic and austeno-ferritic stainless steel forgings.
NS-EN 10349:2009 Steel castings - Austenitic manganese steel castings
NS 14355:1984 Stainless steels — Austenitic chromium-nickel-steel 14355
09/30185942 DC BS EN 13835. Founding. Austenitic cast irons
AENOR UNE-EN 10349:2011 Steel castings - Austenitic manganese steel castings
NS 14350:1984 Stainless steels — Austenitic chromium-nickel-steel 14350
DANSK DS/EN 10253-4/AC:2009 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
NS 14455:1984 Stainless steels — Austenitic chromium-nickel-steel 14455
NS 14360:1984 Stainless steels — Austenitic chromium-nickel-steel 14360
BS 7475:1991 Specification for fusion welding of austenitic stainless steels
AENOR UNE-EN 10253-4:2010 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
NS-EN 10253-4:2008 Butt-welding pipe fittings — Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DANSK DS/EN 10253-4:2008 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DANSK DS/EN ISO 2566-2:2000 Steel – Conversion of elongation values – Part 2: Austenitic steels
DANSK DS/EN 10349:2009 Steel castings - Austenitic manganese steel castings
DANSK DS/ISO 2566-2:2022 Steel – Conversion of elongation values – Part 2: Austenitic steels
NS 14325:1984 Stainless steels — Ferritic/austenitic chromium-nickel-steel 14325
NS 14485:1984 Stainless steels — Austenitic chromium-nickel-molybdenum-steel 14485
DIN EN 10228-4 E:2012 Draft Document - Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version prEN 10228-4:2012
NS 14460:1984 Stainless steels — Austenitic chromium-nickel-molybdenum-steel 14460
12/30270662 DC BS EN 10228-4. Non-destructive testing of steel forgings. Part 4. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
12/30256820 DC BS EN 10357. Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
04/30100065 DC EN 10253-3. Butt-welding pipe fittings. Part 3. Wrought austenitic and austenitic-ferritic, duplex, stainless steels without specific inspection requirements
DIN EN 1564 E:2009 Draft Document - Founding - Ausferritic spheroidal graphite cast iron; German version prEN 1564:2009
NS 14450:1984 Stainless steels — Austenitic chromium-nickel-molybdenum-steel 14450
BS S 205:1969 Specification for austenitic chromium-nickel steel wire and springs
NS-EN ISO 8249:2000 Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)
NS-EN ISO 8249:2018 Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
NS 14310:1984 Stainless steels — Ferritic/austenitic chromium-nickel-molybdenum-steel 14310
AENOR UNE-EN ISO 8249:2001 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)
DANSK DS/EN ISO 8249:2018 Welding – Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
NS 14480:1984 Stainless steels — Austenitic (heat resistant) chromium-nickel-steel 14480
MIL MIL-C-24707/3-1989 CASTINGS, FERROUS, CORROSION-RESISTANT, AUSTENITIC, CHROMIUM-NICKEL

GSO

OS GSO ISO 2892:2013 Austenitic cast irons -- Classification
GSO ISO 2892:2013 Austenitic cast irons -- Classification
BH GSO ISO 13521:2016 Austenitic manganese steel castings
OS GSO ISO 13521:2014 Austenitic manganese steel castings
GSO ISO 13521:2014 Austenitic manganese steel castings
BH GSO ISO 17804:2016 Founding -- Ausferritic spheroidal graphite cast irons -- Classification
GSO ISO 2566-2:2017 Steel -- Conversion of elongation values -- Part 2: Austenitic steels

German Institute for Standardization

DIN EN 10253-4 Berichtigung 1:2009-11 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German version EN 10253-4:2008, Corrigendum to DIN EN 10253-4:2008-06; German version EN 10253-4:2008/AC:20...
DIN EN 10222-5:2017-06 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:2017
DIN EN 10222-5 E:2013-01 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DIN EN 10222-5:2000 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999
DIN EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:2017
DIN EN 1564:2006 Founding - Austempered ductile cast irons(includes Amendment A1:2006); English version of DIN EN 1564:2006-03
DIN EN 10222-5 Berichtigung:2004 Steel forgings for pressure vessels – Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999
DIN EN 13835:2012 Founding - Austenitic cast irons; German version EN 13835:2012
DIN EN 13835:2012-04 Founding - Austenitic cast irons; German version EN 13835:2012
DIN EN 10357:2022 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
DIN EN 1564:2012-01 Founding - Ausferritic spheroidal graphite cast irons; German version EN 1564:2011
DIN EN 10357:2022-10 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry; German version EN 10357:2022
DIN EN 10228-4:2016-10 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:2016
DIN EN 10357:2021 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry; German and English version prEN 10357:2021
DIN EN 10253-3 Berichtigung 1:2013-07 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements; German version EN 10253-3:2008, Corrigendum to DIN EN 10253-3:2009-02
DIN EN 10253-3:2009-02 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements; German version EN 10253-3:2008
DIN EN 10253-4:2017 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German and English version prEN 10253-4:2017
DIN EN 10349:2010-02 Steel castings - Austenitic manganese steel castings; German version EN 10349:2009
DIN EN 10253-3:2009 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements; English version of DIN EN10253-3:2009-02
DIN EN 10253-4:2008-06 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German version EN 10253-4:2008 / Note: To be replaced by DIN EN 10253-4 (2017-11).
DIN EN ISO 8249 E:2017-07 Welding austenite and duplex ferrite Austenite Cr-Ni Number of ferrites in stainless steel weld metal (draft)
DIN EN 10253-3 E:2004-11 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
DIN EN 10228-4:1999 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999
DIN EN ISO 8249:2018-11 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018); German version EN ISO 8249:2018
DIN EN 10357 E:2012-02 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
DIN EN 10253-4 E:2003-07 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DIN EN 10253-4:2008 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; English version of DIN EN 10253-4:2008-06
DIN EN 10228-4 E:2012-12 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
DIN EN ISO 8249:2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000); German version EN ISO 8249:2000
DIN EN ISO 2566-2:1999 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984); German version EN ISO 2566-2:1999
DIN EN ISO 8249:2018 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
DIN EN 10357:2014 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry; German version EN 10357:2013
DIN EN ISO 2566-2:2022-10 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05); German version EN ISO 2566-2:2021

Korean Agency for Technology and Standards (KATS)

KS D ISO 2892:2013 Austenitic cast irons－Classification
KS D ISO 2892:2009 Austenitic cast irons-Classification
KS D 4319-2001(2011) AUSTENITIC IRON CASTINGS
KS D 4319-2013 AUSTENITIC IRON CASTINGS
KS D 4319-2001 Austenitic iron castings
KS D ISO 13521-2013 Austenitic manganese steel castings
KS D ISO 13521-2003(2008) Austenitic manganese steel castings
KS D ISO 13521:2013 Austenitic manganese steel castings
KS D ISO 13521:2003 Austenitic manganese steel castings
KS B 0524-2022 Welding — Determination of Ferrite Number(FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
KS B 0524-2002(2017) Welding－Determination of Ferrite Number(FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
KS D ISO 2566-2:2005 Steel-Conversion of elongation values-Part 2:Austenitic steels
KS D ISO 2566-2:2013 Steel－Conversion of elongation values－Part 2：Austenitic steels
KS D ISO 3651-2:2019 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic, austenitic and ferritic-austenitic(duplex) stainless steels — Corrosion test in media containing sulfuric
KS D ISO 2566-2-2005(2010) Steel－Conversion of elongation values－Part 2：Austenitic steels

International Organization for Standardization (ISO)

ISO 2892:2007 Austenitic cast irons - Classification
ISO 2892:1973 Austenitic cast iron
ISO 13521:1999 Austenitic manganese steel castings
ISO 13521:2023 Austenitic manganese steel castings
ISO 13521:2015 Austenitic manganese steel castings
ISO 17804:2005 Founding - Ausferritic spheroidal graphite cast irons - Classification
ISO 23749:2022 Microbeam analysis — Electron backscatter diffraction — Quantitative determination of austenite in steel
ISO 23703:2022 Microbeam analysis — Guidelines for misorientation analysis to assess mechanical damage of austenitic stainless steel by electron backscatter diffraction (EBSD)
ISO 2892:2007/Cor 1:2009 Austenitic cast irons — Classification — Technical Corrigendum 1
ISO 8249:2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
ISO 2566-2:2021 Steel — Conversion of elongation values — Part 2: Austenitic steels
ISO 2566-2:1984 Steel; Conversion of elongation values; Part 2 : Austenitic steels

KR-KS

KS D ISO 2892-2009 Austenitic cast irons－Classification
KS D ISO 3651-2-2019 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic, austenitic and ferritic-austenitic(duplex) stainless steels — Corrosion test in media containing sulfuric

Lithuanian Standards Office

LST EN 10222-5+AC-2000 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
LST EN 13835-2012 Founding - Austenitic cast irons
LST EN 1564-2012 Founding - Ausferritic spheroidal graphite cast irons
LST EN 10253-3-2009 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
LST EN 10228-4-2000 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
LST EN 10253-4-2008/AC-2009 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
LST EN 10253-4-2008 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
LST EN 10349-2010 Steel castings - Austenitic manganese steel castings
LST EN ISO 8249:2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)

Spanish Association for Standardization (UNE)

UNE-EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
UNE-EN 10222-5:2000 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS.
UNE-EN 10213-4:1996 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES. Part 4: Austenitic and austenitic-ferritic steel grades.
UNE-EN 13835:2012 Founding - Austenitic cast irons
UNE-EN 13835:2003 Founding - Austenitic cast irons
UNE-EN 10357:2014 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
UNE-EN 1564:2012 Founding - Ausferritic spheroidal graphite cast irons
UNE-EN 10357:2023 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
UNE-EN 10228-4:2016 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
UNE-EN 10253-3:2010 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
UNE-EN 10253-4:2010 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
UNE-EN 10228-4:2000 NON-DESTRUCTIVE TESTING OF STEEL FORGINGS. PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS.
UNE-EN 10349:2011 Steel castings - Austenitic manganese steel castings
UNE-EN ISO 8249:2019 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
UNE-EN 1564:1998 FOUNDING. AUSTEMPERED DUCTILE CAST IRONS.
UNE-EN ISO 8249:2001 Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals. (ISO 8249:2000).
UNE-EN ISO 2566-2:2022 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-06)
UNE 36-411 Pt.2-1985 Changes in the expansion value of steel. Part 2: Austenitic Steels

European Committee for Standardization (CEN)

EN 10222-5:2017 Steel Forgings for Pressure Purposes - Part 5: Martensitic@ Austenitic and Austenitic-Ferritic Stainless Steels
EN 10222-5:1999 Steel Forgings for Pressure Purposes - Part 5: Martensitic, Austenitic and Austenitic-Ferritic Stainless Steels
EN 10222-5:1999/AC:1999 Steel Forgings for Pressure Purposes - Part 5: Martensitic, Austenitic and Austenitic-Ferritic Stainless Steels Ratified European Text
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
EN 13835:2012 Founding - Austenitic cast irons
prEN 10357-2021 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
EN 10213-4:1995 Technical Delivery Conditions for Steel Castings for Pressure Purposes - Part 4: Austenitic and Austenitic-Ferritic Steel Grades
EN 10228-4:1999 Non-Destructive Testing of Steel Forgings - Part 4: Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steel Forgings
prEN 10213-4-1993 Technical delivery conditions for steel castings for pressure purposes; part 4: austenitic and austenitic-ferritic steel grades
EN 10228-4:2016 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10357:2013 Austenitic@ austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
FprEN 10253-4-2021 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10349:2009 Steel castings - Austenitic manganese steel castings
CEN EN 10253-4-2008_ Butt-welding pipe fittings — Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN ISO 8249:2018 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
EN ISO 2566-2:2021 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05)
EN ISO 2566-2:1999 Steel - Conversion of Elongation Values - Part 2: Austenitic Steels
EN ISO 8249:2000 Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals ISO 8249:2000

DE-GPVA

AD 2000-Merkblatt W2-2008 Materials for pressure vessels.Austenitic and austenitic-ferritic steels
AD 2000-Merkblatt HP7/3-2015 Manufacture and testing of pressure vessels.Heat treatment.Austenitic and austenitic-ferritic steels

Danish Standards Foundation

DS/EN 10222-5+AC:2002 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DS/EN 13835:2013 Founding - Austenitic cast irons
DS/EN 1564:2013 Founding - Ausferritic spheroidal graphite cast irons
DS/EN 10253-3:2009 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
DS/EN 10228-4:2002 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
DS/EN 10253-4:2008 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DS/EN 10349:2010 Steel castings - Austenitic manganese steel castings
DS/EN 10253-4/AC:2009 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DS/EN ISO 8249:2000 Welding - Determination of Ferrite Number in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
DS/EN ISO 2566-2:2000 Steel - Conversion of elongation values - Part 2: Austenitic steels

Association Francaise de Normalisation

NF EN 10222-5:2017 Pièces forgées en acier pour appareils à pression - Partie 5 : aciers inoxydables austénitiques martensitiques et austénoferritiques
NF A36-620-5*NF EN 10222-5:2017 Steel forgings for pressure purposes - Part 5 : martensitic, austenitic and austenitic-ferritic stainless steels
NF A36-620-5:2000 Steel forgings for pressure purposes - Part 5 : martensitic, austenitic and austenitic-ferritic stainless steels.
NF EN 13835/A1:2006 Founding Austenitic cast irons
NF A32-301/A1:2006 Founding - Austenitic cast irons.
NF A32-301*NF EN 13835:2012 Founding - Austenitic cast irons.
NF A32-301:2003 Founding - Austenitic cast irons.
NF EN 13-285:2018 Founding Austenitic cast irons
NF EN 13835:2003 Founding Austenitic cast irons
NF EN 10253-3:2009 Raccords à souder bout à bout - Partie 3 : aciers inoxydables austénitiques et austéno-ferritiques sans contrôle spécifique
NF EN 13835:2012 Fonderie - Fontes austénitiques
NF EN 10253-4:2009 Raccords à souder bout-à-bout - Partie 4 : aciers inoxydables austénitiques et austéno-ferritiques (duplex) avec contrôle spécifique
NF EN 10357:2022 Tubes soudés longitudinalement en acier inoxydable austénitique, ferritique et austéno-ferritique pour l'industrie alimentaire et chimique
NF A32-202*NF EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
NF A04-315-4*NF EN 10228-4:2016 Non-destructive testing of steel forgings - Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
NF A04-315-4:1999 Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.
NF A49-249*NF EN 10357:2014 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
NF A49-170-3*NF EN 10253-3:2009 Butt-welding pipe fittings - Part 3 : wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements.
NF A49-170-4*NF EN 10253-4:2009 Butt-welding pipe fittings - Part 4 : wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements.
NF EN 10349:2009 Aciers moulés - Pièces moulées en acier austénitique au manganèse
NF A32-056*NF EN 10349:2009 Steel castings - Austenitic manganese steel castings
NF A32-055-4:1996 Technical deliverry conditions for steel castings for pressure purposes. Part 4 : austenitic and austenitic-ferritic steel grades.
NF A89-207*NF EN ISO 8249:2018 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
NF S94-090:2005 Medico-surgical equipment - Materials for ancillary positioning instruments for surgical instrument - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels.
NF A03-175:1999 Steel. Conversion of elongation values. Part 2 : austenitic steels.
NF EN ISO 8249:2018 Welding - Determination of ferrite index (FN) in weld metal of austenitic stainless steel and ferritic-austenitic chrome-nickel duplex
NF A49-217:1987 Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions.
NF A89-207:2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.
NF A03-175*NF EN ISO 2566-2:2021 Steel - Conversion of elongation values - Part 2 : austenitic steels
NF A49-244:1993 Steel tubes - Welded austenitic stainless and austenitic ferritic steel rolled tubes for pressure service - Dimensions, technical conditions for delivery.

TR-TSE

TS 551-1967 AUSTENITIC CAST IRON

CZ-CSN

CSN ISO 2892:1994 Austenitic cast iron
CSN 38 5523-1960 Fuel gas analysis with the Orsat gas analyser.

Standard Association of Australia （SAA）

AS 5054:2007 Ausferritic spheroidal graphite cast irons - Classification
AS 1833:1976 Austenitic iron castings
AS G15:1969 Specification for austenitic cast iron
AS 1833:1986 Iron castings - Austenitic cast iron

British Standards Institution (BSI)

BS EN 10222-5:2017 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
BS 3468:1986(1999) Specification for Austenitic cast iron
BS ISO 13521:2015 Austenitic manganese steel castings
BS ISO 17804:2006 Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification
BS ISO 13521:2023 Austenitic manganese steel castings
BS EN 13835:2012 Founding. Austenitic cast irons
BS EN 13835:2002 Founding - Austenitic cast irons
BS ISO 23749:2022 Microbeam analysis. Electron backscatter diffraction. Quantitative determination of austenite in steel
BS EN 10222-5:2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
BS EN 10228-4:1999 Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
BS EN 10357:2022 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
BS EN ISO 8249:2000 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
BS EN 10228-4:2016 Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
BS EN 10213:2007+A1:2016 Technical delivery conditions for steel castings for pressure purposes - Austenitic and austenitic-ferritic steel grades
BS 7475:1991(1999) Specification for Fusion welding of austenitic stainless steels
BS EN 10349:2009 Steel castings - Austenitic manganese steel castings
BS EN ISO 2566-2:2001 Steel - Conversion of elongation values - Austenitic steels
21/30398224 DC BS ISO 23749. Microbeam analysis. Electron backscatter diffraction. Quantitative determination of austenite in steel
BS EN 10213-4:1996 Technical delivery conditions for steel castings for pressure purposes - Austenitic and austenitic-ferritic steel grades
BS 5770-4:1981 Steel strip intended for the manufacture of springs - Specification for martensitic and austenitic stainless steel
21/30435508 DC BS EN 10357. Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
BS EN ISO 8249:2018 Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
BS EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
BS EN 10253-4:2008 Butt-welding pipe fittings - Part 4:Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
BS EN 10253-4:2008(2009) Butt-welding pipe fittings - Part 4:Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
17/30347091 DC BS EN 10253-4. Butt-welding pipe fittings - Part 4. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
BS EN ISO 2566-2:2021 Steel. Conversion of elongation values - Austenitic steels
BS EN 1564:1997 Founding - Austempered ductile cast irons
BS ISO 23703:2022 Microbeam analysis. Guidelines for misorientation analysis to assess mechanical damage of austenitic stainless steel by electron backscatter diffraction (EBSD)
BS EN ISO 2566-2:2021(2022) Steel — Conversion of elongation values Part 2 : Austenitic steels

Japanese Industrial Standards Committee (JISC)

JIS G 5510:1999 Austenitic iron castings
JIS G 5510:2012 Austenitic iron castings
JIS G 5510:1987 Austenitic iron castings
JIS Z 3119:2006 Methods of measurement for ferrite content in austenitic and austenitic-ferritic stainless steel deposited metals
JIS Z 3119:2017 Methods of measurement for ferrite content in austenitic and austenitic-ferritic stainless steel deposited metals
JIS G 0551:1998 Methods of austenite grain size determination for steel

American Society for Testing and Materials (ASTM)

ASTM A351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
ASTM A351/A351M-05 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
ASTM A270/A270M-15 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A270-03a(2008)e1 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
ASTM A270/A270M-15(2019) Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A436-84(2020) Standard Specification for Austenitic Gray Iron Castings
ASTM A270/A270M-23 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A436-84(2001) Standard Specification for Austenitic Gray Iron Castings
ASTM A270/A270M-24 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A439-83(2004) Standard Specification for Austenitic Ductile Iron Castings
ASTM A815/A815M-09a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A439-83(1999) Standard Specification for Austenitic Ductile Iron Castings
ASTM A995/A995M-18 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
ASTM A439/A439M-18 Standard Specification for Austenitic Ductile Iron Castings
ASTM A439/A439M-18(2022) Standard Specification for Austenitic Ductile Iron Castings
ASTM E1086-22 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM A128/A128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese
ASTM A128/A128M-93(2017) Standard Specification for Steel Castings, Austenitic Manganese
ASTM E1086-14 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM A128/A128M-93(1998) Standard Specification for Steel Castings, Austenitic Manganese
ASTM A128/A128M-19 Standard Specification for Steel Castings, Austenitic Manganese
ASTM A815/A815M-07a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-13 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A128/A128M-93(2012) Standard Specification for Steel Castings, Austenitic Manganese
ASTM A128/A128M-93(2007) Standard Specification for Steel Castings, Austenitic Manganese
ASTM A815/A815M-09 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-04 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-08 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A436-84(2015) Standard Specification for Austenitic Gray Iron Castings
ASTM A815/A815M-22 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-07 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-20 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-24a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-08b Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-07b Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-00a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-13a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A815/A815M-08a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

FI-SFS

SFS 4425-1979 Austenitic stainless steel
SFS 725-1980 Austenitic stainless steel 725 X4CrNi18 9
SFS 720-1980 Austenitic stainless steel 720 X2CrNi18 10
SFS 721-1986 Austenitic stainless steel 721 X2CrNiN18 10
SFS 757-1980 Austenitic stainless steel 757 X4CrNiMo17 12 3
SFS 752-1980 Austenitic stainless steel 752 X2CrNiMo17 13 3
SFS 750-1986 Austenitic stainless steel 750 X2CrNiMo17 12 2
SFS 772-1986 Austenitic stainless steel 772 X2CrNiMoN18 14 5
SFS 773-1986 Austenitic stainless steel 773 X2CrNiMo17 14 5
SFS 770-1986 Austenitic stainless steel 770 X2CrNiMo19 13 4
SFS 753-1986 Austenitic stainless steel 753 X2CrNiMoN17 11 3

South African Bureau of Standard

SANS 407:2008 Austenitic manganese steel castings
SANS 965:2008 Welded austenitic stainless steel tubes
SANS 937:2008 Austenitic spheroidal graphite iron castings
SANS 965:1969 Welded austenitic stainless steel tubes

DIN

DIN EN 13835:2006 Founding - Austenitic cast irons

CEN - European Committee for Standardization

EN 1564:1997 Founding - Austempered Ductile Cast Irons (Incorporates Amendment A1: 2006)
PREN 10253-4-2017 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

Society of Automotive Engineers (SAE)

SAE AMS7490H-1968 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490E-1962 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490K-1977 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490L-1982 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490F-1963 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490J-1971 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490C-1956 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490D-1960 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AMS7490G-1966 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE AIR4498A-2012 AUS-Bay Quenching of 300M Steel
SAE AMS2759/4-2011 Heat Treatment, Austenitic Corrosion-Resistant Steel Parts
SAE AMS2759/4B-1996 Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE AMS2759/4D-2018 Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE AMS7490M-2011 RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys or Precipitation Hardenable Alloys
SAE AMS2759/4A-1996 HEAT TREATMENT AUSTENITIC CORROSION-RESISTANT STEEL PARTS
SAE AMS7490R-2020 Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel or Cobalt Alloys, or Precipitation-Hardenable Alloys
SAE AMS2759/4B-2007 Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE AMS7490Q-2014 Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys
SAE AMS7490N-2001 Rings, Flash Welded Corrosion and Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys
SAE AMS2759/4C-2008 Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE AMS2759/4C-2014 Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE AMS7493H-1980 RINGS, FLASH WELDED Non-Austenitic Corrosion Resistant Steels
SAE AMS7493A-1955 RINGS, FLASH WELDED Non-Austenitic Corrosion Resistant Steels

NO-SN

NS 1699-1969 Steel castings, austenitic manganese steel

Association of German Mechanical Engineers

DVS 0917-2006 Submerged arc welding of austenitic steels
DVS 0917-1986 Submerged arc welding of austenitic steels
DVS 0928-1991 Submerged arc welding of austenitic-ferritic joints
DVS 0928-2006 Submerged arc welding of austenitic-ferritic joints
DVS 0931-1992 MAG welding of austenitic stainless steels

U.S. Military Regulations and Norms

ARMY MIL-DTL-13080 E VALID NOTICE 1-2004 ELECTRODES, WELDING, COVERED: AUSTENITIC STEEL (19-9 MODIFIED) FOR ARMOR APPLICATIONS
ARMY MIL-DTL-13080 E-1999 ELECTRODES, WELDING, COVERED: AUSTENITIC STEEL (19-9 MODIFIED) FOR ARMOR APPLICATIONS

American Society of Mechanical Engineers (ASME)

ASME SEC II A SA-351/SA-351M-2003 Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts ASTM A 351/A 351M-00

SE-SIS

SIS 11 11 02-1971 Estimating the austenitic grain size of ferritic and martensitic steels
SIS 14 25 70-1970 High-strength, high-temperature austenitic steel
SIS SS 14 23 46-1979 Austenitic stainless free-cutting steel
SIS SS 14 23 84 E-1983 Austenitic stainless free-cutting steel
SIS SS 14 23 46 E-1979 Austenitic stainless free-cutting steel
SIS SS 14 23 84-1983 Austenitic stainless free-cutting steel
SIS 14 23 46-1973 Austenitic stainless free-cutting steel
SIS 11 71 05 E-1970 Intergranular corrosion test of austenitic stainless steel

AT-ON

OENORM EN 10357-2021 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry

IN-BIS

IS 2749-1974 Specification for austenitic iron castings
IS 276-1978 Specification for austenitic manganese steel castings
IS 9879-1981 Method for spectral analysis of austenitic and ferritic stainless steels using the point-to-surface technique
IS 3803 Pt.2-1989 Steels - Conversion of elongation values Part 2 Austenitic steels

YU-JUS

JUS C.J2.024-1989 Austenitic castiron. Technical reguirements
JUS C.A4.063-1987 Conversion of elongation values for austenitic steels

Indonesia Standards

SNI 07-1333-1989 Methods of austenitic grain size test method of steels

TH-TISI

TIS 1006-1990 Standard for austenitic stainless steel pipes
TIS 1439-1997 Austenitic stainless steel tubes for heat.exchangers
TIS 2676-2015 Austenitic stainless steel tubes for general service

BE-NBN

NBN 911-1972 Seamless austenitic steel boiler tubes

RU-GOST R

GOST R ISO 2566-2-2009 Steel. Conversion of elongation values. Part 2. Austenitic steel
GOST R 53686-2009 Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal

AR-IRAM

IRAM 612-1951 Austenitic steel plates and hoops

American Welding Society (AWS)

AWS UEAW-1986 Handbook on the Ultrasonic Examination of Austenitic Welds
WRC 132:1968(1976) The Measurement of Delta Ferrite In Austenitic Stainless Steels
WRC 021:1955 Coating Moisture Investigations of Austenitic Electrodes of the Modified 18-8 Type
AWS A4.2M-2006 Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal

CU-NC

NC 04-77-1986 Materials Testing. Content Determination of Alpha Phase in Austenitic Steels. Metallographic Analysis

RO-ASRO

STAS SR ISO 2892:1994 Austenitic cast iron

American National Standards Institute （ANSI)

ANSI/ASTM A815/A 815M:2001 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

SAE - SAE International

SAE AMS7490N-1996 Rings@ Flash Welded Corrosion and Heat Resistant Austenitic Steels@ Austenitic-Type Iron@ Nickel@ or Cobalt Alloys@ or Precipitation-Hardenable Alloys

International Federation of Trucks and Engines

NAVISTAR MPAPS AT-2-2016 Determination of Austenite Grain Size by Thermal Etching
NAVISTAR CEMS AT-2-2001 Determination of Austenite Grain Size by Thermal Etching

AWS - American Welding Society

UEAW-1986 Handbook on the Ultrasonic Examination of Austenitic Welds

WRC - Welding Research Council

BULLETIN 132-1968 THE MEASUREMENT OF DELTA FERRITE IN AUSTENITIC STAINLESS STEELS