Analytical measurement software

Analytical measurement software, Total:398 items.

The international standard classification for "Analytical measurement software" includes: Software development and system documentation , Substations. Surge arresters , Hoses and hose assemblies , Metrology and measurement in general .

The Chinese standard classification for "Analytical measurement software" includes: Software engineering , Electric transmission and transformation equipment in general , Rubber tube, rubber belt and tape .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25000.51-2016 Systems and software engineering―Systems and software Quality Requirements and Evaluation (SQuaRE)―Part 51:Requirements for quality of Ready to Use Software Product(RUSP) and instructions for testing
GB/T 18491.1-2001 Information technology - Software measurement - Functional size measurement - Part 1: Definition of concepts
GB/T 42566-2023 Systems and software engineering—Functional size measurement—MkII Function point analysis
GB/T 18491.2-2010 Information technology—Software measurement—Functional size measurement—Part 2:Conformity evaluation of software size measurement methods to GB/T 18491.1—2001
GB/T 20917-2007 Software engineering—Software measurement process
GB/T 9573-2003 Rubber and plastics hose and hose assembilies-Methods of measurement of dimensions
GB/T 18491.4-2010 Information technology—Software measurement—Functional size measurement—Part 4:Reference model
GB/T 42449-2023 Systems and software engineering—Functional size measurement—IFPUG method
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies—Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
GB/T 16896.2-2010 Digital recorders for measurements in high-voltage impulse tests—Part 2:Software requirement
GB/T 25000.51-2010 Software engineering—Software product Quality Requirements and Evaluation (SQuaRE)—Requirements for quality of Commercial Off-The-Self (COTS) software product and instructions for testing
GB/T 32911-2016 Specification for software testing cost measurement

Group Standards of the People's Republic of China

T/BIAIM 0009-2024 General quality specification for automotive R&D simulation analysis software tools
T/BIAIM 0005-2024 Evaluation specification for automotive dynamics simulation analysis software tools
T/BIAIM 0004-2024 Automobile fluid and thermal management three-dimensional simulation analysis software tool evaluation specification
T/QGCML 2074-2023 Power Intelligent Risk Control Analysis and Management Software
T/CECPA 002-2022 Technical specification for evaluation of core subchannel analysis software
T/CAMS 137-2023 Software Defined Collaborative Management and Control Network for Industrial Identification and Resolution Traffic Testing Specification
T/QGCML 861-2023 Technical specification for the application of bridge structure inspection and analysis software
T/CQAE 11010-2019 Intelligent Analysis and Decision-Making Software Testing Guide
T/BIAIM 0008-2024 Evaluation specifications for software tools for automobile strength and durability analysis
T/BIAIM 0007-2024 Evaluation specifications for automotive NVH analysis software tools
T/SHDSGY 159-2022 Fully premixed condensing gas boiler
T/QGCML 3373-2024 Equipment production process data analysis software
T/BIAIM 0011-2024 Automobile thermal management one-dimensional simulation analysis software tool evaluation specification
T/CECPA 006-2022 Evaluation Method of Discrete Ordinate Shielding Analysis Software
T/QGCML 1804-2023 Passenger flow analysis and early warning decision-making system software
T/QGCML 3187-2024 Intelligent oxygen gas detector indication error repeatability calculation and analysis software
T/QGCML 4229-2024 Spectral multi-source data analysis software
T/BIAIM 0010-2024 Evaluation specifications for software tools for automobile collision safety analysis
T/CECPA 007-2022 Review for Fuel Rod Analysis Software
T/QGCML 3333-2024 Community property consulting service process demand analysis software

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 142-2004 Guide for military software safety analysis
GJB 1091-1991 Military software requirements analysis
GJB 10158-2021 Analysis of software requirements for military programmable logic devices
GJB 5236-2004 Military software quality metrics

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38634.2-2020 Systems and software engineering—Software testing—Part 2:Test processes
GB/T 38634.3-2020 Systems and software engineering—Software testing—Part 3: Test documentation
GB/T 36964-2018 Software engineering--Specification for software development cost measurement
GB/T 38634.4-2020 Systems and software engineering—Software testing—Part 4：Test techniques
GB/T 25000.23-2019 Systems and software engineering—Systems and software Quality Requirements and Evaluation(SQuaRE)—Part 23:Measurement of system and software product quality
GB/T 25000.22-2019 Systems and software engineering—Systems and software Quality Requirements and Evaluation(SQuaRE)—Part 22:Measurement of quality in use
GB/T 25000.21-2019 Systems and software engineering - Systems and software Quality Requirementsand Evaluation(SQuaRE) - Part 21: Quality measure elements
GB/T 25000.20-2021 Systems and software engineering -- Systems and software quality requirements and evaluation (SQuaRE) -- Part 20: Quality measurement framework

Professional Standard - Aerospace

QJ 3129-2001 Specification of software requirements analysis for space products

Professional Standard - Aviation

HB 6468-1990 Basic requirements of software requirements analysis phase

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 25000.10-2016 Systems and software engineering-Systems and software Quality Requirements and Evaluation(SQuaRE)一Part 10:System and software quality models
GB/T 25000.24-2017 Systems and software engineering-Systems and software Quality Requirements and Evaluation (SQuaRE)-Part 24:Measurement of data quality

Professional Standard - Nuclear Industry

EJ/T 645-1992 A guide to computer software requirements analysis for the nuclear industry

National Metrological Technical Specifications of the People's Republic of China

JJF 1182-2021 Guide for Software Testing of Measuring Instruments
JJF 1182-2007 Guide for Software Testing of Measuring Instruments

Professional Standard - Electron

SJ/T 11375-2007 Software component-Product quality-Part 2:Quality metrics
SJ/T 11374-2007 Software component - Product quality - Part 1: Quality model

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1709-2008 Software commissioned testing cost measurement

Beijing Provincial Standard of the People's Republic of China

DB11/T 1425-2017 Information technology software item measure element

Sichuan Provincial Standard of the People's Republic of China

DB5101/T 7-2018 Information technology software item measure element

工业和信息化部

SJ/T 11619-2016 NESMA Functional Size Measurement Method for Software Engineering Version 2.1 Definitions and statistical guidelines using function point analysis
SJ/T 11618-2016 Software Engineering MK II Function Point Analysis and Counting Practical Guide
SJ/T 11615.1-2016 Network Data Collection and Analysis Software Specification Part 1: Framework

国家能源局

NB/Z 20541-2019 Guide for hazard analysis of software important to safety in nuclear power plants

Shandong Provincial Standard of the People's Republic of China

DB37/T 2791-2016 Basic method of software testing cost measurement

Professional Standard - Chemical Industry

HG/T 3037-2000 Rubber hoses and hose assemblies for measured fuel dispensing
HG/T 3037-2019 Rubber and plastic hoses and hose assemblies for measured fuel dispensing

Korean Agency for Technology and Standards (KATS)

KS X ISO/IEC 15939-2020 Software engineering－Software measurement process
KS X ISO/IEC 15939-2005(2020) Software engineering－Software measurement process
KS X ISO/IEC 25023:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation(SQuaRE) — Measurement of system and software product quality
KS X ISO/IEC 20926:2005 Software engineering-IFPUG 4.1 Unadjusted functional size measurement method-Counting practices manual
KS X ISO/IEC 14143-2-2007(2017) Information technology－Software measurement－Functional size measurement－Part 2：Conformity evaluation of software size measurement methods to KS X 2222－1：2001
KS X ISO/IEC 14143-2-2022 Information technology－Software measurement－Functional size measurement－Part 2：Conformity evaluation of software size measurement methods to KS X 2222－1：2001
KS M ISO 4671-2023 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
KS M ISO 4671:2018 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
KS X ISO/IEC 14143-4:2003 Information technology-Software measurement-Functional size measurement-Part 4:Reference model
KS X 2222-1-2001(2017) Information technology－Software measurement－Functional size measurement－Part 1：Definition of concepts
KS X 2222-1-2001(2021) Information technology－Software measurement－Functional size measurement－Part 1：Definition of concepts
KS X 2222-1-2021 Information technology－Software measurement－Functional size measurement－Part 1：Definition of concepts
KS X 2222-1-2001 Information technology-Software measurement-Functional size measurement-Part 1:Definition of concepts
KS X ISO/IEC/IEEE 29119-4:2018 Software and systems engineering ㅡ Software testing ㅡ Part 4: Test Techniques
KS X ISO/IEC/IEEE 29119-2:2018 Software and systems engineering ㅡ Software testing ㅡ Part 2: Test processes
KS X ISO/IEC/IEEE 29119-3:2018 Software and systems engineering ㅡ Software testing ㅡ Part 3: Test documentation
KS M ISO 4671:2008 Rubber and plastics hoses and hose assemblies-Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
KS M ISO 4671:2013 Rubber and plastics hoses and hose assemblies－Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
KS X ISO/IEC 25051:2019 Software engineering — Systems and software Quality Requirements and Evaluation(SQuaRE) — Requirements for quality of Ready to Use Software Product(RUSP) and instructions for testing
KS X ISO/IEC TR 14143-3-2020 Information technology－Software measurement ? Functional size measurement－Part 3：Verification of functional size measurement methods
KS X ISO/IEC/IEEE 29119-4-2023 Software and systems engineering ㅡ Software testing ㅡ Part 4: Test Techniques
KS X ISO/IEC/IEEE 29119-3-2023 Software and systems engineering ㅡ Software testing ㅡ Part 3: Test documentation
KS X ISO/IEC TR 14143-3:2005 Information technology-Software measurement ? Functional size measurement-Part 3:Verification of functional size measurement methods
KS X ISO/IEC TR 14143-5:2005 Information technology-Software measurement-Functional size measurement-Part 5:Determination of functional domains for use with functional size measurement
KS X ISO/IEC TR 14143-3-2005(2020) Information technology－Software measurement?Functional size measurement－Part 3：Verification of functional size measurement methods
KS X ISO/IEC/IEEE 29119-2-2023 Software and systems engineering ㅡ Software testing ㅡ Part 2: Test processes
KS M ISO 5772-2023 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification

SCC

BS ISO/IEC 15939:2002 Software engineering. Software measurement process
NS-ISO/IEC 5055:2021 Information technology — Software measurement — Software quality measurement — Automated source code quality measures
DANSK DS/ISO/IEC 5055:2021 Information technology – Software measurement – Software quality measurement – Automated source code quality measures
CAN/CSA-ISO/IEC 20926-10:2010 Software and systems engineering — Software measurement — IFPUG functional size measurement method 2009
DANSK DS/ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
BS PD ISO/TR 11462-4:2022 Guidelines for implementation of statistical process control (SPC)-Reference data sets for measurement process analysis software validation
AWWA CONS51100 Net Benefit Analysis: Process and Computer Software
DANSK DS/ISO/IEC 25023:2016 Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Measurement of system and software product quality
CEI UNI ISO/IEC 25023:2020 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
DANSK DS/ISO/IEC 24570:2018 Software engineering – NESMA functional size measurement method – Definitions and counting guidelines for the application of function point analysis
08/30183784 DC BS ISO/IEC 20926. Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
08/30185468 DC BS ISO/IEC 20926. Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
DANSK DS/ISO/TR 11462-4:2022 Guidelines for implementation of statistical process control (SPC) – Part 4: Reference data sets for measurement process analysis software validation
BS PD 0028:2002 Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement
DANSK DS/ISO/IEC 25022:2016 Systems and software engineering – Systems and software quality requirements and evaluation (SQuaRE) – Measurement of quality in use
DANSK DS/ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality
06/30149562 DC IEC 61083-2. Instruments and software used for measurements in high-voltage impulse test. Part 2. Requirements for software
BS ISO/IEC /IEEE 32430:2021 Software engineering. Trial use standard for software non-functional sizing measurements
DANSK DS/ISO/IEC/IEEE 32430:2021 Software engineering – Trial use standard for software non-functional sizing measurements
DANSK DS/ISO/IEC 25020:2019 Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Quality measurement framework
DANSK DS/ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
BS 5173-101.2:1987 Methods of test for rubber and plastics hoses and hose assemblies. Determination of dimensions-Measurement of length of hoses and hose assemblies
VDI 6201 BLATT 1-2015 Software-supported structural analysis — basics, requirements, modelling
CEI UNI ISO/IEC 25022:2020 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Measurement of quality in use
DANSK DS/EN ISO 4671:2008 Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
DANSK DS/EN ISO 4671/A1:2008 Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
BS PD ISO/TS 18409:2018 Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
BS EN ISO 4671:2007 Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
DANSK DS/ISO 4671:2022 Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
CAN/CSA-ISO/IEC 14143-1:2007(R2017) Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of Concepts
CAN/CSA-ISO/IEC 15939:2008(R2013) Systems and software engineering — Measurement process
DANSK DS/ISO/IEC/IEEE 15939:2017 Systems and software engineering – Measurement process
BS ISO/IEC 14143-2:2002 Information technology. Software measurement. Functional size measurement-Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
CEI UNI ISO/IEC/IEEE 15939:2023 Systems and software engineering - Measurement process
CAN/CSA-ISO/IEC 14143-1-2001(R2005) Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of Concepts
DANSK DS/ISO/IEC TR 14143-4:2002 Information technology - Software measurement - Functional size measurement - Part 4: Reference model
BS ISO/IEC /IEEE 15939:2017 Systems and software engineering. Measurement process
NS-ISO/IEC/IEEE 29119-3:2021 Software and systems engineering – Software testing – Part 3: Test documentation
DANSK DS/ISO/IEC/IEEE 29119-3:2013 Software and systems engineering – Software testing – Part 3: Test documentation
BS ISO/IEC 25051:2006 Software engineering. Software product quality requirements and evaluation (SQuaRE). Requirements for quality of commercial off-the-shelf (COTS) software product and instructions for testing
CSA ISO/IEC/IEEE 29119-4:2022 Software and systems engineering — Software testing — Part 4: Test techniques
DANSK DS/ISO/IEC/IEEE 29119-4:2015 Software and systems engineering – Software testing – Part 4: Test techniques
NS-ISO/IEC/IEEE 29119-2:2021 Software and systems engineering – Software testing – Part 2: Test processes
CSA ISO/IEC/IEEE 29119-2:2022 Software and systems engineering — Software testing — Part 2: Test processes
NS-ISO/IEC/IEEE 29119-3:2013 Software and systems engineering - Software testing - Part 3: Test documentation
NS-ISO/IEC/IEEE 29119-2:2013 Software and systems engineering - Software testing - Part 2: Test processes
CSA ISO/IEC/IEEE 29119-3:2022 Software and systems engineering — Software testing — Part 3: Test documentation
DIN IEC 61083-2 E:2006 Draft Document - Instruments and software used for measurements in high-voltage impulse test - Part 2: Requirements for software (IEC 42/205/CD:2006)
DANSK DS/ISO/IEC/IEEE 29119-2:2013 Software and systems engineering – Software testing – Part 2: Test processes
DANSK DS/ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
06/30149962 DC ISO 4671. Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions of hoses and length of hose assemblies
AENOR UNE-CEN/TS 15127-1:2006 Health informatics. Physiological measurements software test. Part 1: Generalities
DIN CEN/TS 15127-1:2005 Health informatics - Testing of physiological measurement software - Part 1: General; English version CEN/TS 15127-1:2005
SN-CEN/TS 15127-1:2005 Health informatics — Testing of physiological measurement software — Part 1: General
NS-ISO 4671:1984 Rubber and plastics hose and hose assemblies — Methods of measurement of dimensions
AENOR UNE-EN ISO 4671:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
BS EN ISO 4671:2001 Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions
BS EN 24671:1993 Rubber and plastics hose and hose assemblies. Methods of measurement of dimensions
AENOR UNE-EN ISO 4671/A1:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
NS-EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
CAN/CSA-ISO/IEC 15939-2004 Software Engineering - Software Measurement Process (Adopted ISO/IEC 15939:2002, first edition, 2002-07-15)
NS-EN ISO 4671:2007 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
DIN 10762 E:2020 Draft Document - Analysis of honey - Determination of ethanol content - Enzymatic method
BS 5173-104-104.1:1991 Methods of test for rubber and plastics hoses and hose assemblies. Electrical tests-Measurement of electrical resistance of hoses and hose assemblies
DANSK DS/EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
13/30268868 DC BS ISO/IEC 25051. Software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing
NS-EN 1360:2005 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
AENOR UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
NS-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification

International Organization for Standardization (ISO)

ISO/IEC 15939:2002 Software engineering - Software measurement process
ISO/IEC 5055:2021 Information technology — Software measurement — Software quality measurement — Automated source code quality measures
ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
ISO/IEC TR 25021:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
ISO/IEC/IEEE CD 32430:2023 Software Engineering — Standard for software non-functional sizing measurements
ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing - Specification
ISO/IEC 14143-2:2011 Information technology - Software measurement - Functional size measurement - Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
ISO/TR 11462-4:2022 Guidelines for implementation of statistical process control (SPC) — Part 4: Reference data sets for measurement process analysis software validation
ISO/IEC 24570:2018 Software engineering - NESMA functional size measurement method - Definitions and counting guidelines for the application of function point analysis
ISO/IEC 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
ISO/TS 18409:2018 Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
ISO/IEC 25020:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality measurement framework
ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
ISO/IEC/IEEE 29119-3:2021 Software and systems engineering — Software testing — Part 3: Test documentation
ISO 4671:2007/Amd 1:2011 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured
ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO 4671:2022 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality
ISO/IEC 25020:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Measurement reference model and guide
ISO/IEC 25022:2016 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Measurement of quality in use
ISO 22308:2005 Cork stoppers - Sensory analysis
ISO/IEC/IEEE 15939:2017 Systems and software engineering - Measurement process
ISO/IEC TR 14143-4:2002 Information technology - Software measurement - Functional size measurement; Part 4: Reference model
ISO/IEC 15939:2007 Systems and software engineering - Measurement process
ISO/IEC/IEEE 29119-4:2015 Software and systems engineering — Software testing — Part 4: Test techniques
ISO/IEC/IEEE 29119-3:2013 Software and systems engineering.Software testing.Part 3: Test documentation
ISO/IEC/IEEE 29119-2:2013 Software and systems engineering.Software testing.Part 2: Test processes
ISO 2190:1972 Cork — Granulated cork — Determination of moisture content
ISO 2030:1976 Cork — Granulated cork — Size analysis by mechanical sieving
ISO 4671:1984 Rubber and plastics hose and hose assemblies; Methods of measurement of dimensions
ISO 4671:1999 Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions
ISO/IEC 20968:2002 Software engineering - Mk II function point analysis - Counting practices manual
ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
ISO/IEC CD TR 29119-14:2018 Software and systems engineering — Software testing — Part 14: Data migration testing
ISO/IEC TR 14143-3:2003 Information technology - Software measurement; Functional size measurement - Part 3: Verification of functional size measurement methods

Danish Standards Foundation

DS/ISO/IEC 5055:2021 Information technology – Software measurement – Software quality measurement – Automated source code quality measures
DS/ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
DS/ISO/IEC 24570:2007 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
DS/ISO/IEC 25051/Corr. 1:2008 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing
DS/ISO/IEC 25051:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing
DS/ISO/IEC 15939:2007 Systems and software engineering - Measurement process
DS/ISO/IEC/IEEE 29119-3:2013 Software and systems engineering - Software testing - Part 3: Test documentation
DS/ISO/IEC/IEEE 29119-2:2013 Software and systems engineering - Software testing - Part 2: Test processes
DS/EN ISO 4671/A1:2011 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured
DS/ISO 4671:1987 Rubber and plastics hose assemblies. Methods of measurement of dimensions
DS/EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification

British Standards Institution (BSI)

BS 7925-2:1998 Software testing. Software component testing
BS ISO/IEC 5055:2021 Information technology. Software measurement. Software quality measurement. Automated source code quality measures
BS ISO/IEC 20926:2010 Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
BS ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
BS ISO/IEC 24570:2018 Software engineering. NESMA functional size measurement method. Definitions and counting guidelines for the application of function point analysis
BS ISO/IEC 25023:2016 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Measurement of system and software product quality
BS IEC 61636:2016 Software Interface for Maintenance Information Collection and Analysis (SIMICA)
PD ISO/TR 11462-4:2022 Guidelines for implementation of statistical process control (SPC). Reference data sets for measurement process analysis software validation
BS ISO/IEC/IEEE 32430:2021 Software engineering. Trial use standard for software non-functional sizing measurements
PD 0028:2002 Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement
BS ISO/IEC 25021:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
24/30473122 DC BS ISO/IEC/IEEE 32430 Software engineering - Software non-functional size measurement
BS IEC 61636:2021 Software Interface for Maintenance Information Collection and Analysis (SIMICA)
BS ISO/IEC 25022:2016 Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Measurement of quality in use
BS EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
PD ISO/TS 18409:2018 Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
BS ISO/IEC 24570:2005 Software engineering - NESMA functional size measurement method version 2.1. Definitions and counting guidelines for the application of function point analysis
BS ISO/IEC 25020:2007 Software engineering - Software product quality requirements and evaluation (SQuaRE) - Measurement reference model and guide
BS ISO/IEC 25024:2015 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Measurement of data quality
BS ISO/IEC/IEEE 15939:2017 Systems and software engineering. Measurement process
BS ISO 22308:2005 Cork stoppers - Sensory analysis
BS ISO/IEC 14143-1:2007(2012) Information technology — Software measurement — Functional size measurement — Part 1 : Definition of concepts
BS ISO/IEC 15939:2007 Systems and software engineering - Measurement process
BS ISO/IEC 14143-2:2011 Information technology. Software measurement. Functional size measurement. Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
BS ISO/IEC 20968:2002 Software engineering - Mk II function point analysis - Counting practices manual
BS ISO/IEC TR 14143-4:2002 Information technology - Software measurement - Functional size measurement - Reference model
21/30426900 DC BS EN ISO 4671. Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
BS 3338-21:1983(2011) Methods for the sampling and analysis oftin and tin alloys — Part 21 : Determination ofhigh cadmium content ofsoft solders
BS 7020-5.1:1993 Analysis of iron ores. Methods for the determination of silicon content. Gravimetric methods
DD CEN/TS 15127-1:2005 Health informatics. Testing of physiological measurement software - General

Association of German Mechanical Engineers

VDI/VDE 2631 Blatt 9-2003 Form measurement - Examples for measurement and analysis conditions
VDI/VDE 2631 Blatt 9-2014 Form measurement - Examples for measurement and analysis conditions

VDI - Verein Deutscher Ingenieure

VDI/VDE 2631 Blatt 9-2013 Form measurement - Examples for measurement and analysis conditions
VDI 6201 BLATT 2-2019 Softwaregestuetzte Tragwerksberechnung - Verifikationsbeispiele
VDI 6201 BLATT 2-2017 Softwaregestuetzte Tragwerksberechnung - Verifikationsbeispiele

Japanese Industrial Standards Committee (JISC)

JIS X 0141:2004 Software measurement process
JIS X 25023:2018 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Measurement of system and software product quality
JIS X 0135-2:2004 Information technology -- Software measurement -- Functional size measurement -- Part 2: Conformity evaluation of software size measurement methods to JIS X 0135-1:1999
JIS X 25021:2014 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Quality measure elements
JIS K 6330-1:2003 Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies
JIS X 0141:2009 Systems and software engineering -- Measurement process
JIS X 25051:2011 Software engineering -- Software product Quality Requirements and Evaluation (SQuaRE) -- Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing
JIS X 0135-1:2010 Information technology -- Software measurement -- Functional size measurement -- Part 1: Definition of concepts
JIS X 0135-1:1999 Information technology -- Software measurement -- Functional size measurement -- Part 1: Definition of concepts

GB-REG

REG NASA-LLIS-2158-2011 Lessons Learned - Reuse of Analysis Software

Canadian Standards Association (CSA)

CSA ISO/IEC 15939-04 CAN/CSA:2004 Software engineering Software measurement process ISO/IEC 15939:2002
CAN/CSA-ISO/IEC 25023:2018 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of system and software product quality
CSA ISO/IEC 25020:2020 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality measurement framework
CAN/CSA-ISO/IEC 25024:2016 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of data quality
CAN/CSA-ISO/IEC/IEEE 15939:2018 Systems and software engineering — Measurement process
CAN/CSA-ISO/IEC 15939:2008 Systems and software engineering - Measurement process
CAN/CSA-ISO/IEC/IEEE 29119-4:2016 Software and systems engineering — Software testing — Part 4: Test techniques

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS ISO/IEC 20926:2022 Software and systems engineering — Software measurement — IFPUG functional size measurement method 2009
AS/NZS ISO/IEC 24570:2022 Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis
AS/NZS ISO/IEC 25020:2022 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality measurement framework
AS/NZS ISO/IEC 25021:2013 Systems and Software Engineering Systems and Software Quality Requirements and Evaluation (SQuaRE) Quality Measurement Elements
AS/NZS ISO/IEC 24570:2007 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
AS/NZS ISO/IEC/IEEE 15939:2022 Systems and software engineering — Measurement process
AS/NZS ISO/IEC 15939:2013 Systems and Software Engineering Measurement Process
AS/NZS ISO/IEC 25020:2013 Software Product Quality Requirements and Evaluation (SQuaRE) Measurement Reference Model and Guidelines for Software Engineering
AS/NZS ISO/IEC/IEEE 29119.4:2022 Software and systems engineering — Software testing, Part 4: Test techniques
AS/NZS ISO/IEC 20968:2004(R2016) Software engineering - Mk II Function Point Analysis - Counting Practices Manual
AS/NZS ISO/IEC 20968:2004 Software engineering - Mk II Function Point Analysis - Counting Practices Manual
AS/NZS ISO/IEC/IEEE 29119.2:2015 Software and systems engineering - Software testing, Part 2: Test processes
AS/NZS ISO/IEC/IEEE 29119.3:2022 Software and systems engineering — Software Testing, Part 3: Test Documentation
AS/NZS ISO/IEC/IEEE 29119.2:2022 Software and systems engineering — Software testing, Part 2: Test processes
AS/NZS ISO/IEC 25051:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing

BR-ABNT

ABNT NBR 13058-2012 Flexible packaging - Analysis of residual solvents

GSO

GSO ISO/IEC 25021:2013 Software engineering -- Software product Quality Requirements and Evaluation (SQuaRE) -- Quality measure elements
BH GSO ISO/IEC 25021:2016 Software engineering -- Software product Quality Requirements and Evaluation (SQuaRE) -- Quality measure elements
GSO ISO/IEC TR 9126-4:2009 Software engineering — Product quality — Part 4 : Quality in use metrics
GSO ISO/IEC 24570:2023 Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis
BH GSO ISO/IEC 24570:2023 Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis
GSO ISO/IEC 14143-2:2021 Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
BH GSO ISO/IEC 14143-2:2022 Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
GSO ISO/IEC 25051:2015 Software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
OS GSO ISO 4671:2015 Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
GSO ISO 4671:2015 Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
BH GSO ISO 4671:2016 Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
OS GSO ISO/IEC 25051:2015 Software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
GSO ISO/IEC TR 14143-4:2021 Information technology — Software measurement — Functional size measurement — Part 4: Reference model
BH GSO ISO/IEC 25051:2017 Software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
BH GSO ISO/IEC TR 14143-4:2022 Information technology — Software measurement — Functional size measurement — Part 4: Reference model
OS GSO ISO 22308:2013 Cork stoppers -- Sensory analysis
BH GSO ISO/IEC 14143-1:2011 Information technology — Software measurement — Functional size measurement - Part 1: Definition of concepts
BH GSO ISO 22308:2016 Cork stoppers -- Sensory analysis
GSO ISO 22308:2013 Cork stoppers -- Sensory analysis
GSO ISO/IEC 15939:2013 Systems and software engineering -- Measurement process
GSO IEC 61083-1:2007 Instruments and software used for measurement in high- voltage impulse tests - Part 1: Requirements for instruments
GSO ISO/IEC 14143-1:2010 Information technology — Software measurement — Functional size measurement - Part 1: Definition of concepts
BH GSO ISO/IEC 15939:2016 Systems and software engineering -- Measurement process
GSO ISO/IEC/IEEE 29119-3:2015 Software and systems engineering -- Software testing -- Part 3: Test documentation
OS GSO ISO/IEC/IEEE 29119-2:2015 Software and systems engineering -- Software testing -- Part 2: Test processes
GSO ISO/IEC/IEEE 29119-2:2015 Software and systems engineering -- Software testing -- Part 2: Test processes
BH GSO ISO/IEC 25020:2011 Software engineering -- Software product Quality Requirements and Evaluation (Square) – Measurement reference model and guide
BH GSO ISO/IEC/IEEE 29119-3:2017 Software and systems engineering -- Software testing -- Part 3: Test documentation
OS GSO ISO/IEC/IEEE 29119-3:2015 Software and systems engineering -- Software testing -- Part 3: Test documentation
OS GSO ISO/IEC 25020:2010 Software engineering -- Software product Quality Requirements and Evaluation (Square) – Measurement reference model and guide
GSO ISO/IEC TR 14143-3:2017 Information technology -- Software measurement -- Functional size measurement -- Part 3: Verification of functional size measurement methods

American National Standards Institute （ANSI)

ANSI/IEEE 1061:1998 Software Quality Metrics Methodology
ANSI/IEEE 14143.1:2000 Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of Concepts

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1061-1998 Standard for a Software Quality Metrics Methodology IEEE Computer Society Document
IEEE 1061-1992 Software quality metrics methodology
ISO/IEC/IEEE P32430/ DIS March 2024 IEEE Draft International Standard - Software engineering - Software Non-Functional Sizing Measurement
IEEE P29119-2/FDIS, March 2013 Software and systems engineering - Software testing - Part 2: Test process
ISO/IEC/IEEE P32430/CD, August 2023 IEEE Draft International Standard for Software Engineering -- Standard for Software Non-Functional Sizing Measurements
IEEE P982/D4, April 2024 IEEE Draft Standard for Measures of the Software Aspects of Dependability
IEEE STD 1636-2009 IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)
IEEE Std 1636-2009 (Upgraded to Full Use) IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)
IEEE Std 1636-2018 IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)
IEEE STD 1636-2009 (New Trial-Use Standard) IEEE Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)

Society of Automotive Engineers (SAE)

SAE J1927-2014 Cumulative Damage Analysis for Hydraulic Hose Assemblies
SAE ARD50002-1992 A Discussion of Standardization Concepts for Condition Monitoring and Performance Analysis Software
SAE J1927-2009 Cumulative Damage Analysis for Hydraulic Hose Assemblies
SAE AESQRM003-202210 RM13003 - Measurement Systems Analysis
SAE AESQRM003-202105 RM13003 - Measurement Systems Analysis

Association Francaise de Normalisation

NF ISO/IEC 25051:2014 Software engineering - Software quality requirements and evaluation (SQuaRE) - Quality requirements for software packages and test instructions
NF T47-201:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies.
NF B57-102:2005 Cork stoppers - Sensory analysis.
NF A03-301:2002 Founding - Measurement of the mean intercept using image analysis - Aluminium castings with a 5 to 11 content % of silicium.
NF A11-150:1984 Chemical analysis of ferroboron. Determination of boron content. Volumetric method.

SAE - SAE International

SAE J1927-1988 Cumulative Damage Analysis for Hydraulic Hose Assemblies@ Information Report; (October 1988)

KR-KS

KS X ISO/IEC 14143-2-2007(2022) Information technology－Software measurement－Functional size measurement－Part 2：Conformity evaluation of software size measurement methods to KS X 2222－1：2001
KS X ISO/IEC 25023-2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation(SQuaRE) — Measurement of system and software product quality
KS M ISO 4671-2018(2023) Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
KS M ISO 4671-2018 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
KS X ISO/IEC 14143-4-2003(2023) Information Technology - Software Measurement - Functional Dimension Measurement - Part 4: Reference Models
KS X ISO/IEC/IEEE 29119-3-2018(2023) Software and systems engineering ㅡ Software testing ㅡ Part 3: Test documentation
KS X ISO/IEC/IEEE 29119-2-2018 Software and systems engineering ㅡ Software testing ㅡ Part 2: Test processes
KS X ISO/IEC/IEEE 29119-3-2018 Software and systems engineering ㅡ Software testing ㅡ Part 3: Test documentation
KS M ISO 5772-2018(2023) Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
KS X ISO/IEC/IEEE 29119-4-2018 Software and systems engineering ㅡ Software testing ㅡ Part 4: Test Techniques
KS X ISO/IEC 25051-2019 Software engineering — Systems and software Quality Requirements and Evaluation(SQuaRE) — Requirements for quality of Ready to Use Software Product(RUSP) and instructions for testing
KS X ISO/IEC/IEEE 29119-4-2018(2023) Software and systems engineering ㅡ Software testing ㅡ Part 4: Test Techniques
KS X ISO/IEC/IEEE 29119-2-2018(2023) Software and systems engineering ㅡ Software testing ㅡ Part 2: Test processes

Standard Association of Australia （SAA）

AS ISO/IEC 25023:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of system and software product quality
AS ISO/IEC 25022:2019 Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Measurement of quality in use
AS ISO/IEC 25024:2019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of data quality
AS ISO/IEC 25051:2019 Software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
AS ISO/IEC/IEEE 29119.4:2018 Software and systems engineering - Software testing, Part 4: Test techniques

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1636-2018 Software Interface for Maintenance Information Collection and Analysis (SIMICA)
IEEE 29119-3-2013 Software and systems engineering - Software testing - Part 3: Test documentation
IEEE 29119-4-2015 Software.and.systems.engineering - Software testing - Part 4: Test techniques
IEEE 29119-2-2013 Software and systems engineering - Software testing - Part 2: Test processes

International Electrotechnical Commission (IEC)

IEC 61636:2021 Software Interface for Maintenance Information Collection and Analysis (SIMICA)
ISO/IEC/IEEE 32430:2021 Software engineering - Trial use standard for software non-functional sizing measurements
ISO/IEC/IEEE 29119-2:2021 Software and systems engineering - Software testing - Part 2: Test processes
ISO/IEC/IEEE 29119-4:2021 Software and systems engineering - Software testing - Part 4: Test techniques

South African Bureau of Standard

SANS 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
SANS 15939:2002 Software engineering — Software measurement process
SANS 14143-1:2008 Information technology - Software measurement - Functional size measurement Part 1: Definition of concepts
SANS 25020:2008 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Measurement reference model and guide
SANS 15939:2009 Systems and software engineering - Measurement process
SANS 9455-1:1990 Soft soldering fluxes - Test methods Part 1: Determination of non-volatile matter, gravimetric method

Spanish Association for Standardization (UNE)

UNE-ISO/IEC 14143-2:2009 Information technology. Software measurement. Functional size measurement. Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998.
UNE-ISO/IEC 25024:2023 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of data quality
UNE-EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
UNE 56928:2004 Cork stoppers. Sensory analysis.
UNE-ISO/IEC 15939:2009 Systems and software engineering. Measurement process
UNE-CEN/TS 15127-1:2006 Health informatics - Testing of physiological measurement software - Part 1: General
UNE 71045-1:2000 Inrormation technology. Software measurement. Functional size measurement. Part 1: Definition of concepts.
UNE 56917:1988 CORK. GRANULATED CORK. DETERMINATION OF MOISTURE CONTENT
UNE-EN ISO 4671:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
UNE-EN 1360:2006 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification

German Institute for Standardization

DIN 9462:1987 Aerospace; hose assemblies; survey
DIN EN ISO 4671:2010 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007); German version EN ISO 4671:2007
DIN EN ISO 4671:2012 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007 + Amd 1:2011); German version EN ISO 4671:2007 + A1:2011
DIN EN ISO 4671:2022-07 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022); German version EN ISO 4671:2022
DIN EN ISO 4671:2000 Rubber and plastic hoses and hose assemblies – Methods for measuring dimensions
DIN EN ISO 4671:2021 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO/DIS 4671:2021); German and English version prEN ISO 4671:2021
DIN EN 1360:2013-09 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification; German version EN 1360:2013

RO-ASRO

STAS SR EN 29455-1-1994 Soft soldering fluxes. Test methods. Part 1: Determination of non-volatile matter, gravimetric method
SR 2567-1-1997 Soft drinks - Methods of analysis - Determination of total acidity (Uzual method )

European Committee for Standardization (CEN)

EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
EN ISO 4671:2000 Rubber and Plastics Hoses and Hose Assemblies - Methods of Measurement of Dimensions Supersedes EN 24671:1993; ISO 4671:1999
EN ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
EN 24671:1993 Rubber and Plastic Hose and Hose Assemblies - Methods of Measurement of Dimensions
prEN ISO 4671:2021 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO/DIS 4671:2021)

IT-UNI

EC 1-2021 UNI CEI ISO/IEC 25024:2021 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Measurement of data quality

RU-GOST R

GOST R ISO/IEC 25021-2014 Information technology. Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
GOST R ISO 22308-2006 Cork stoppers. Sensory analysis
GOST R 56922-2016 Software and systems engineering.Software testing. Part 3. Test documentation
GOST ISO 4671-2013 Rubber or plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies

American Society for Testing and Materials (ASTM)

ASTM D7729-12 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software

GOSTR

GOST R 58606-2019 Systems and software engineering. Measurement process

IEC - International Electrotechnical Commission

IEC 61636:2016 Software Interface for Maintenance Information Collection and Analysis (SIMICA) (Edition 1.0)

DIN

DIN EN ISO 4671:2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)

YU-JUS

JUS G.S3.101-1991 Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions

Lithuanian Standards Office

LST EN ISO 4671:2008 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
LST EN 1360-2005 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification

AIAG - Automotive Industry Action Group

MSA-2002 Measurement Systems Analysis (MSA)

AT-ON

OENORM EN ISO 4671:2021 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO/DIS 4671:2021)