Plastic sample preparation equipment

Plastic sample preparation equipment, Total:338 items.

The international standard classification for "Plastic sample preparation equipment" includes: Thermoplastic materials , Thermosetting materials , Plastics in general , Mechanical testing of metals , Essential oils .

The Chinese standard classification for "Plastic sample preparation equipment" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Fragrances and flavors .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14454.1-1993 Aromatics. Preparation of test sample
GB/T 32363.2-2015 Plastics―Polyamide(PA)moulding and extrusion materials―Part 2:Preparation of test specimens and determination of properties
GB/T 17037.3-2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
GB/T 11997-1989 Plastics--Preparation and use of multipurpose test specimens
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4:Determination of moulding shrinkage
GB/T 44305.2-2024 Plastics—Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T 1404.2-2008 Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties
GB/T 12001.2-2008 Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 14454.1-2008 Fragrance/Flavor substances - Preparation of test samples
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials - Part 1: General principles and moulding of multipurpose and bar test specimens
GB/T 41758.2-2022 Plastics—Polyketone (PK) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 22271.2-2008 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39812-2021 Plastics—Preparation of test specimens by machining
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 17037.1-2019 Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials

Taiwan Provincial Standard of the People's Republic of China

CNS 4391-1978 Preparation of Specimens for Optical Tests on Plastics Materials-Casting Method
CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
CNS 4390-1978 Preparation of Specimens for Optical Tests on Plastics Materials-Moulding Method
CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material

未注明发布机构

DIN 16780-2 E:1988-11 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
JIS K 7313-2:2024 Plastics -- Poly (phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimen and determination of properties
DIN EN ISO 10210 E:2017-07 Plastics Sample preparation method for biodegradation testing of plastics (draft)
DIN EN ISO 19069-2 E:2014-10 Plastic polypropylene (PP) molding and extrusion materials Part 2: Specimen preparation and property determination (draft)
DIN EN ISO 29988-2 E:2017-07 Plastic polyoxymethylene molding and extrusion materials Part 2: Specimen preparation and property determination (draft)
DIN 16906 E:2014-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN EN ISO 294-5 E:2012-07 Injection molding of specimens of plastic thermoplastic materials Part 5: Preparation of standard samples for anisotropy studies (draft)
DIN EN ISO 294-5 E:2015-08 Injection molding of specimens of plastic thermoplastic materials Part 5: Preparation of standard samples for anisotropy studies (draft)

Professional Standard - Chemical Industry

HG/T 20640-1997（编制说明） Plastic equipment (compilation instructions)
HG/T 20640-1997 Plastic Equipmendt

未注明发布机构

DIN EN ISO 294-5 E:2015-08 Injection molding of specimens of plastic thermoplastic materials Part 5: Preparation of standard samples for anisotropy studies (draft)
DIN EN ISO 19069-2 E:2014-10 Plastic polypropylene (PP) molding and extrusion materials Part 2: Specimen preparation and property determination (draft)
DIN EN ISO 10210 E:2017-07 Plastics Sample preparation method for biodegradation testing of plastics (draft)
DIN 16780-2 E:1988-11 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN EN ISO 29988-2 E:2017-07 Plastic polyoxymethylene molding and extrusion materials Part 2: Specimen preparation and property determination (draft)
JIS K 7313-2:2024 Plastics -- Poly (phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimen and determination of properties
DIN 16906 E:2014-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN EN ISO 294-5 E:2012-07 Injection molding of specimens of plastic thermoplastic materials Part 5: Preparation of standard samples for anisotropy studies (draft)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34691.2-2017 Plastics-Thermoplastic polyester (TP) moulding and extrusion materials- Part 2:Preparation of test specimens and determination of properties

German Institute for Standardization

DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN EN ISO 2818:1997 Plastics - Preparation of test specimens by machining (ISO 2818:1994); German version EN ISO 2818:1996
DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 10457:1988 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
DIN EN ISO 2818:2019-04 Plastics - Preparation of test specimens by machining (ISO 2818:2018); German version EN ISO 2818:2019
DIN EN ISO 2818:2018 Plastics - Preparation of test specimens by machining (ISO/FDIS 2818:2018); German and English version FprEN ISO 2818:2018
DIN EN ISO 2818:2019 Plastics - Preparation of test specimens by machining (ISO 2818:2018)
DIN 16780-2:1990 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties
DIN 51701-4:2006 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006); English version of DIN EN ISO 7391-2:2006-06
DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN EN ISO 1874-2:2007 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2006); English version of DIN EN ISO 1874-2:2007-04
DIN EN 1482-2:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation; German version EN 1482-2:2007 / Note: To be replaced by DIN EN ISO 14820-2 (2019-01).
DIN EN ISO 11468:1999 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999
DIN EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007); English version of DIN EN ISO 1873-2:2007-11
DIN EN ISO 2898-2:2009 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008); English version of DIN EN ISO 2898-2:2009-03
DIN EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)English version of DIN EN ISO 1872-2:2007-05
DIN EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation English version of DIN EN 1482-2:2007-04
DIN EN ISO 1622-2:1999 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999

SCC

DANSK DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
BS PD CEN/TS 16011:2013 Plastics. Recycled plastics. Sample preparation
DIN EN 16011 E:2009 Draft Document - Plastics - Recycled plastics - Sample preparation; German version prEN 16011:2009
09/30206298 DC BS EN 16011. Plastics. Recycled plastics. Sample preparation
BS 2782-9 METHOD 930A:1977 Methods of testing plastics. Sampling and test specimen preparation-Preparation of test specimens by machining
BS 2782-9 METHOD 910A:1977 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 910A:1996 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding test specimens of thermoplastic materials
BS 2782-9 METHOD 901A:1977 Methods of testing plastics. Sampling and test specimen preparation-Compression moulding test specimens of thermoplastic materials
BS EN ISO 2818:1997 Plastics. Preparation of test specimens by machining
BS 2782-9 METHOD 940B:1981 Methods of testing plastics. Sampling and test specimen preparation-Preparation of test specimens of amorphous thermoplastic moulding material with a defined level of shrinkage in the form of rectangular plates by injection moulding
BS 2782-9 METHOD 931A:1988 Methods of testing plastics. Sampling and test specimen preparation-Preparation and use of multipurpose test specimens
DIN 16906 E:2014 Draft Document - Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
BS EN ISO 15103-2:2004 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2004 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 1873-2:1997 Plastics. Polypropylene (PP) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 1874-2:1996 Plastics. Polyamide (PA) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 1874-2:2006 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
NS-EN ISO 10210:2017 Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
BS 2782-9 METHOD 902A:1977 Methods of testing plastics. Sampling and test specimen preparation-Compression moulding test specimens of thermosetting materials
AENOR UNE-EN ISO 10210:2018 Plastics. Methods for preparing samples for biodegradation testing of plastic materials. (ISO 10210:2012).
DANSK DS/EN ISO 10210:2017 Plastics – Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
DANSK DS/ISO 2818:2019 Plastics – Preparation of test specimens by machining
BS EN ISO 2898-2:2000 Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 21970-2:2018 Plastics. Polyketone (PK) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 3673-2:2000 Plastics. Epoxy resins-Preparation of test specimens and determination of properties
DIN EN ISO 10210 E:2017 Draft Document - Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German and English version prEN ISO 10210:2017
BS 2782-9 METHOD 941:1990 Methods of testing plastics. Sampling and test specimen preparation-Determination of maximum reversion of amorphous thermoplastics moulding materials
NS-EN ISO 2818:1996 Plastics — Preparation of test specimens by machining (ISO 2818:1994)
BS EN ISO 8986-2:1996 Plastics. Polybutene (PB) moulding and extrusion materials-Preparation of test specimens and determination of properties
AENOR UNE 53293 IN:1981 PLASTICS. AMORPHOUS THERMOPLASTIC MATERIALS. PREPARATION OF SPECIMENS WITH A DEFINED LEVEL OF SHRINKAGE
DANSK DS/EN ISO 2818:2019 Plastics – Preparation of test specimens by machining (ISO 2818:2018)
09/30184235 DC BS ISO 10210. Plastics. Preparation of samples for biodegradation testing
BS ISO 20558-2:2018 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials-Preparation of test specimen and determination of properties
BS EN ISO 2897-2:2003 Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials-Preparation of test specimens and determination of properties
AENOR UNE-EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
BS ISO 8257-2:1990 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 2897-2:1999 Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials-Preparation of test specimens and determination of properties
DANSK DS/EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
NS-EN 1482-2:2007 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
DANSK DS/EN ISO 14526-2:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties
NS-EN ISO 2818:2019 Plastics - Preparation of test specimens by machining (ISO 2818:2018)
DANSK DS/ISO 14820-2:2018 Fertilizers and liming materials – Sampling and sample preparation – Part 2: Sample preparation
07/30152076 DC BS ISO 25137-2. Plastics. Sulfone plastics (SP) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
AENOR UNE-EN ISO 2818:1997 Plastics - Preparation of test specimens by machining (ISO 2818:1994)
BS EN ISO 2580-2:2000 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS ISO 9988-2:1999 Plastics. Polyoxymethylene (POM) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2003 Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
AS 3572.1:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 1: Preparation of glass filament reinforced plastics test specimens
07/30169634 DC BS ISO 294-5. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 5. Preparation of standard specimens for investigating anisotropy
BS 2782-9 METHOD 911:1995 Methods of testing plastics. Sampling and test specimen preparation-Injection moulding of multipurpose thermosetting test specimens
BS EN ISO 7391-2:2000 Plastics. Polycarbonate (PC) moulding and extrusion materials-Preparation of test specimens and determination of properties
DANSK DS/ISO 16396-2:2022 Plastics – Polyamide (PA) molding and extrusion materials – Part 2: Preparation of test specimens and determination of properties

Association Francaise de Normalisation

XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
NF T58-001:1997 Plastics. Preparation of test specimens by machining.
NF EN ISO 2818:2019 Plastiques - Préparation des éprouvettes par usinage
NF T58-001*NF EN ISO 2818:2019 Plastics - Preparation of test specimens by machining
NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastics - Sample preparation methods for biodegradation testing of plastic materials
NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
NF T30-708:1983 Paints. Thick plastics coatings. Preparation of test pieces. Application of products.
NF T50-001-2:2007 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T53-032-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-006-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-006-2*NF EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T53-002-2:1999 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF T50-005-2:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: preparation of test specimens and determination of properties
NF T50-002-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF EN ISO 15252-2:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF EN ISO 294-5:2017 Plastics - Injection molding of specimens of thermoplastic materials - Part 5: preparation of standardized specimens to determine anisotropy
NF EN ISO 14526-2:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF U42-400-2*NF EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2 : sample preparation
NF T53-003-2:2009 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.

AENOR

UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
UNE-EN ISO 2818:1997 PLASTICS. PREPARATION OF TEST SPECIMENS BY MACHINING (ISO 2818:1994).
UNE-EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation

European Committee for Standardization (CEN)

PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN ISO 2818:2019 Plastics - Preparation of test specimens by machining (ISO 2818:2018)
EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
EN ISO 2818:1996 Plastics - Preparation of Test Specimens by Machining ISO 2818: 1994
EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN 14780:2011 Solid biofuels - Sample preparation
EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 2898-2:1999 Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 2898-2:1997
EN ISO 1163-2:1999 Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy

Danish Standards Foundation

DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
DS/EN ISO 2818:1997 Plastics - Preparation of test specimens by machining
DS/EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
DS/EN ISO 15252-2:2000 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 14526-2:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties

RU-GOST R

GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions
GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 19679-1974 Plastics. Preparation of injection moulded and compression moulded specimens for optical testing of thermoplastics
GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
GOST EN 1482-2-2013 Fertilizers and liming materials. Sampling and sample preparation. Part 2. Sample preparation.
GOST 26277-1984 Plastics. Preparation of test specimens by machining

BR-ABNT

ABNT MB-1425-1979 Preparation of testing samples for aminoplastics used in casting plastics
ABNT MB-1424-1979 Preparation of testing samples for phenolic plastics used in casting plastics
ABNT MB-1426-1979 Preparation of test specimens for casting polyester and epoxy resin

TR-TSE

TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 3460-1980 PLASTICS - AMORPHOUS THERMOPLASTIC MOULDING MATERIALS — PREPARATION OF TEST SPECIMENS WITH A DEFINED LEVEL OF SHRINKAGE —PART 1: TEST SPECIMENS IN THE FORM OF PARALLELEPIPEDIC BARS (INJECTION MOULDING AND COMPRESSION MOULDING)

SE-SIS

SIS SS 16 11 55-1984 Plastics - Preparation of test specimens by machining
SIS SS 16 11 57-1982 Plastics - Amorphous thermoplastic moulding materials - Preparation of test specimens with a defined level of shrinkage - Part 2: Test specimens in the form of rectangular plates (Injection moulding)

International Organization for Standardization (ISO)

ISO 2818:1980 Plastics; Preparation of test specimens by machining
ISO 2818:1974 Title missing - Legacy paper document
ISO 2818:1994 Plastics - Preparation of test specimens by machining
ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
ISO 2818:2018 Plastics — Preparation of test specimens by machining
ISO 3167:1983 Plastics — Preparation and use of multipurpose test specimens
ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 9988-2:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:1997 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7391-2:1996 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7391-2:1986 Plastics; Polycarbonate moulding and extrusion materials; Part 2 : Preparation of test specimens and determination of properties
ISO 2557-2:1986 Plastics; Amorphous thermoplastics; Preparation of test specimens with a specified reversion; Part 2 : Plates
ISO 20558-2:2018 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties
ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 28078-2:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 2818:1994/Cor 1:2007 Plastics - Preparation of test specimens by machining; Technical Corrigendum 1
ISO 15526-2:2000 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1874-2:2006 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 9988-2:1999 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 15103-2:2000 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 16365-2:2014 Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 14820-2:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
ISO 7792-2:1997 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 2557-1:1989 Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion — Part 1: Bars
ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1874-2:1995 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 16396-2:2022 Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 294-5:2001/Cor 1:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Technical Corrigendum 1
ISO 8986-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1622-2:1995 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 294-5:2001/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Amendment 1
ISO 9988-2:1991 Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:1997/Amd 1:2000 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1

Japanese Industrial Standards Committee (JISC)

JIS K 7144:1999 Plastics -- Preparation of test specimens by machining
JIS K 6949:2015 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
JIS K 6920-2:2009 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7364-2:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7313-2:2007 Plastics -- Poly (phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7072:1991 Preparation of carbon fibre reinforced plastic panels for test purpose
JIS K 7366-2:1999 Plastics -- Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6920-2:2000 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 6937-2:2002 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

British Standards Institution (BSI)

BS EN ISO 2818:1996 Plastics - Preparation of test specimens by machining
BS EN ISO 2818:2019 Plastics. Preparation of test specimens by machining
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS 2782-9 Method 940A:1990 Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion
BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 28078-2:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 28078-2:2010 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1163-2:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Sample preparation
BS EN ISO 1163-2:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 8257-2:2002 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 27547-1:2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens
BS EN ISO 16396-2:2017 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1874-2:2006+A1:2010 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1874-2+A1:2007 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2897-2:2004 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 24025-2:2020 Plastics. Sulfone polymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 20558-2:2019 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Preparation of test specimen and determination of properties
BS EN ISO 1874-2:2012 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS EN ISO 15252-2:2000 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Preparation of test specimens and determination of properties
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 4894-2:1996 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 25137-2:2009 Plastics - Sulfone polymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Preparation of test specimens and determination of properties

GSO

GSO ISO 2818:2015 Plastics -- Preparation of test specimens by machining
BH GSO ISO 10210:2016 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
GSO ISO 10210:2013 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
OS GSO ISO 2818:2015 Plastics -- Preparation of test specimens by machining
BH GSO ISO 14820-2:2022 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
GSO ISO 14820-2:2021 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
GSO ISO 27547-1:2013 Plastics -Preparation of test specimens of thermoplastic materials using mouldless technologies -Part 1: General principles, and laser sintering of test specimens

PL-PKN

PN C89008-1973 Plas?ics Prepara?ion of specimens for optical ?es?s Casting me?hod
PN C04707-1974 Dyestuiffs Sampling and preparation of samples
PN C89009-1973 Plajtics Preparation o? specimenj for optical tesfs Moulding method

CZ-CSN

CSN 64 0205-1979 Plaslies. Preparatiou of test pecimens írom casting resins

ES-UNE

UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN ISO 2818:2019 Plastics - Preparation of test specimens by machining (ISO 2818:2018)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

IN-BIS

IS 13360 Pt.2/Sec.7-1992 Methods of testing plastics Part 2 Sampling and preparation of test specimens Section 7: Preparation of test specimens of amorphous thermoplastics with specified recovery: Plate
IS 8543 Pt.3/Sec.2-1978 Test Methods for Plastics Part III Preparation of Specimens Section 2: Injection Molded Specimens
IS 13360 Pt.2/Sec.4-1993 Plastics. Methods of testing. Part 2: Sampling and preparation of test specimens. Section 4: Preparation lof test specimens by machining
IS 13360 Pt.2/Sec.1-1992 Plastics—Test methods Part 2 Sampling and preparation of test specimens Section 1: Compression-molded test specimens of thermoplastic materials

HU-MSZT

MNOSZ 10459-1952 Surgical equipment. Hammered wood or plastic

Korean Agency for Technology and Standards (KATS)

KS M ISO 15526-2-2006(2011) Plastics－Polyketone(PK) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 15103-2-2012(2017) Plastics－Poly(phenylene ether)(PPE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 9988-2-2012(2017) Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 8986-2-2013(2018) PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 1872-2:2011 Plastics-Polyethylene(PE) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1872-2:2016 Plastics－Polyethylene(PE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7792-2-2013(2018) Plastics ㅡ Thermoplastic polyester(TP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 1873-2:2016 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1873-2:2011 Plastics-Polypropylene(PP) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1622-2-2008(2018) Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 9988-2-2012(2022) Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7391-2:2016 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7391-2:2011 Plastics-Polycarbonate(PC) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 9988-2:2012 Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 21970-2:2021 Plastics — Polyketone(PK) moulding and extrusion materials —Part 2: Preparation of test specimens and determination of properties
KS M ISO 2898-2-2012(2022) Plastics－Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 15103-2:2012 Plastics－Poly(phenylene ether)(PPE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 20028-2:2021 Plastics — Thermoplastic polyester(TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
KS M ISO 14526-2-2022 Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 2：Preparation of test specimens and determination of properties
KS M ISO 8986-2:2008 Plastics-Polybutylene(PB) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 8986-2:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 7792-2:2011 Plastics-Thermoplastic polyester(TP) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties

Lithuanian Standards Office

LST EN ISO 2818:2002 Plastics - Preparation of test specimens by machining (ISO 2818:1994)
LST EN 1482-2-2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation

ZA-SANS

SANS 5591:1975 Preparation of samples and extracts used in testing plastics for medical use
SANS 161-2:1997 Plastics - Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties

KR-KS

KS M ISO 1873-2-2011 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1872-2-2011 Plastics－Polyethylene(PE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 19069-2-2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 7391-2-2016 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 17855-2-2017 Plastics ㅡ Polyethylene (PE) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 1874-2-2013(2023) PLASTIC — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 20028-2-2021 Plastics — Thermoplastic polyester(TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
KS M ISO 21970-2-2021 Plastics — Polyketone(PK) moulding and extrusion materials —Part 2: Preparation of test specimens and determination of properties
KS M ISO 8986-2-2013(2023) PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES

CEN - European Committee for Standardization

EN ISO 1873-2:1997 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN ISO 20558-2:2019 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties
EN ISO 1872-2:1997 Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 8986-2:1995 Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)

YU-JUS

JUS ISO 2557-2:1992 Plastics. Amorphous thermoplastics. Preparation of test specimens with a specified maximum reversion. Part 2: Plates
JUS ISO 2557-1:1992 Plastics. Amorphous thermoplastics. Preparation of test specimens with a specified maximum reversion. Part 1: Bars

American Society for Testing and Materials (ASTM)

ASTM D7308-17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials