ring

ring, Total:100 items.

The international standard classification for "ring" includes: Energy and heat transfer engineering in general , Plants and equipment for the food industry , Road transport , Concrete and concrete products , Non-ferrous alloys in general , Adhesives , Non-destructive testing , Reinforced plastics , Agricultural machines and equipment in general , Magnetic components , Wind turbine systems and other alternative sources of energy , Internal combustion engines , Chemical analysis of metals , Titanium , Materials for aerospace construction , Components for aerospace construction , Aluminium and aluminium alloys , Equipment for the metallurgical industry , Materials and components for shipbuilding , General standards related to shipbuilding and marine structures , Manufacturing forming processes .

The Chinese standard classification for "ring" includes: Other building material equipment , Grain and oil/fat processing machinery , Traffic control in general , Concrete product , Forging and pressing , Basic standards and general methods for adhesives , Basic standards and general methods , Fibre reinforced composites , Farming and foresting machinery and tools , Magnetic component , Wind energy , Engine body and moving parts , Metal chemical property test method , Metal casting and forging materials used for aviation and aerospace , Electronic components , Manipulation system and its accessories , Pipe fittings, clamps and seals , Other power equipment , Highway transportation in general , Vessel materials and their inspection methods , Vessel technology , Technical management , Hardware and household appliance machinery , Technical management , Dedicated processing equipment , Communication network technical system .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34785-2017 Grain and oil machinery-Loop type extractor
GB/T 2578-1989 Fabrication method of ring test specimen for filament-winding reinforced plastics
GB/T 44508-2024 Wind energy generation systems—Specification for ring forgings of wind turbines
GB/T 63-1988 Lifting nuts
GB/T 22640-2008 Test method of C-Ring sample to stress-corrosion cracking for wrought aluminium and aluminium alloys products
GB/T 10415-2007 Agricultural machinery—Endless hexagonal belts and groove sections of corresponding pulleys
GB/T 28868-2012 Dimensions of uncoated ring cores of magnetic oxides
GB/T 26942-2011 Loop vehicle detector
GB/T 31125-2014 Test method of adhesive tapes―Loop tack
GB/T 30886-2014 Annular shaft kiln
GB/T 1461-1988 Test method for interlaminar shear strength of ring of filament-winding reinforced plastics
GB/T 30566-2014 GH4169 Alloy Bars, Forgings and Rings
GB/T 1458-2008 method for mechanical properties of ring of filament - Winding reinforced plastics
GB/T 4623-2014 Circular concrete pole
GB/T 1458-2023 Test method for mechanical properties of ring of filament-winding reinforced composites
GB/T 10416-2007 Agricultural machinery—Endless variable-speed V-belts and groove sections of corresponding pulleys
GB/T 23906-2009 Non-destructive testing—Rings for magnetic particle testing
GB 4623-2014 Circular concrete pole
GB 4623-1994 Circular prestressed concrete pole
GB/T 1458-1988 Test method for tensile strength of ring of filament-winding reinforced plastics
GB/T 9634.4-2007 Ferrite cores-Guide on the limits of surface irregularities-Part 4:Ring-cores
GB/T 14223-1993 Internal combustion engines－Piston rings－Keystone rings and half keystone rings

Professional Standard - Aerospace

QJ 574-1981 Reinforced Ring End Sleeve Solder Lugs
QJ 1350.47-1988 Cold stamping die parts and components process card ring backing plate
QJ 693-1982 Ring backing plate
QJ 573-1981 Ring end sleeve solder lug
QJ 575-1981 Round ring end sleeve solder lug

Professional Standard - Aviation

HB 6982-1994 175℃ Type A Circular Terminal
HB 6983-1994 175℃ Type B Circular Terminal
HB 7682-2000 Low Swelling GN907 Alloy Ring Blank and Ring Unit
HB 6572-1992 GH 150 Alloy Round Cake, Ring Blank and Ring Unit
HB 355-1971 Pivot pin with annular groove and hole
HB 5419-1991 GH1016 alloy round cakes, ring blanks and ring parts
HB 5496-1992 GH536 alloy round cakes, ring blanks and ring parts
HB 6574-1992 GH 903 low expansion alloy circular blank and piece
HB 5-2-1983 Steel Wire Rope Annular Knitted Joint
HB 5438-1989 GH 3044 Alloy Disk, Circular Blank and Piece
HB 7238-1995 Circular Forging of Titanium Alloy
HB 839-1975 Ring spacer
HB 7647-2004 Specification for clamp loop fixed tube

Professional Standard - Chemical Industry

HG/T 4801-2015 Ring tread caring press
HG/T 4802-2015 Ring tread building machine
HG/T 20612-2009 Metallic Ring Joint Gaskets for use with Steel Pipe Flanges (PN designated)
HG 2292-1992 Annular blowout preventer rubber core
HG/T 20633-2009 Metallic Ring Joint Gaskets for Use with Steel Pipe Flanges (Class designated)

Group Standards of the People's Republic of China

T/CPUMT 009-2022 Aluminum and aluminum-alloy rolled ring forgings
T/CCMI 11-2021 Machining Allowance and Tolerance of Large Hot Rolled Ring Forgings
T/CPARK 18-2021 Ring Electric Single Girder Crane
T/QGCML 246-2022 Specifications for installation and maintenance of circular shuttle
T/ZZB 0719-2018 Permanent magnetic ferrite for speaker—Big ring shaped
T/CCMI 16-2022 General technical requirements for forging and rolling large ring forgings
T/CSTM 00347-2020 Metallic materials Determination of disk/ring forgings residual stress Contour method
T/CASMES 81-2022 Low emission annular shaft kiln

Professional Standard - Ferrous Metallurgy

YB/T 6292-2024 Spiral-wound wire ring strap
YB 4409-2014 Code for quality inspection and acceptance of annular heating furnace brick-lining
YB/T 071-2024 Ring furnace bottom mechanical technical conditions
YB/T 071-1995 Specification for annular furnace bottom machinery

Professional Standard - Traffic

JT/T 455-2001 Vehicle loop detector

Professional Standard - Energy

NB/T 11311-2023 Code for design of concrete pole structure with circular cross section
NB/T 31025-2012 Ring Type Forgings of Wind Turbine Generator System

Professional Standard-Ships

CB 1120-1984 Test Method for Cracking of Ring Type Insert
CB/Z 212.2-1986 Typical Process of Low-frequency Ring Transformer and Choking Coil Winding
CB/Z 212.3-1986 Typical Process of Low-frequency Ring Transformer and Choking Dipping Paint and Wrapping Cover
CB/Z 212.1-1986 Typical Process of Low-frequency Ring Transformer and Choking Coil Iron Core Manufacturing

Professional Standard - Military and Civilian Products

WJ 2674-2005 Specifications for ring springs used for small caliber guns

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2532-2022 Test method for furnace temperature uniformity of annular furnace

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3801-2015 Technical Regulations for the Prevention and Control of Bovine Annular Theileriasis

Military Standard of the People's Republic of China-General Armament Department

GJB 1931/4-2011 Detail specification for soft-ferrite toroid-core type R2KG H7×4×4
GJB 9578-2018 Specification for aluminum alloy ring forgings for aerospace use

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 147-2024 Technical regulations for the prevention and control of cattle annular theileriasis

Professional Standard - Machinery

JB/T 10478-2004 Machining allowance & tolerance for rolled ring
JB/T 6066-2004 Non-destructive testing―Rings for magnetic particle testing

Professional Standard - Electron

SJ 2881-1988 Dimensions for toroidal cores made of magnetic oxides or iron powder
SJ 1760-1981 BOD-type C-cores for single-phase transformers
SJ 52453/1-1996 Type XGS80/120 toroidal rate-earth permanent magnets of low temperature Coefficient, Detail specification for
SJ 51931.1-1995 Detail specification for type R2kX H6×3.6×5 toroidal cores
SJ/T 31356-1994 Requirements of readiness and methods of inspection and assessment for circular (O-shaped) vacuumizing production lines
SJ/T 31333-1994 Requirements of Readiness and Methods of Inspection and Assessment for Automatic Annular Wire Crest Welders
SJ 50599.9-2006 Specification for circular plug-type ring-release connectors

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 6474-2008 Specification for high-pressure toroidal composite vessels for missile

Professional Standard - Railway

TB/T 2287-1997 Circular Equal Diameter Prestressed Concrete Catenary Pillar
TB/T 2287-2005 Circular prestressed concrete pole for overhead contact system of electrified railway

Professional Standard - Post and Telecommunication

YDN 027-1997 Technical Requirements for SDH Transmission Network - Ring Network (Tentative Specifications)

British Standards Institution (BSI)

BS 3790:1981 Specification for endless wedge belt drives and endless V-belt drives
BS 3790:1995 Specification for endless wedge belt drives and endless V-belt drives

U.S. Military Regulations and Norms

ARMY MIL-C-48665-1986 CORE; TOROID
ARMY MIL-C-48665 NOTICE 1-1997 CORE; TOROID

Bureau of Indian Standards

IS 4797-1968 Loop Mats

Magyar Szabványügyi Testület

MNOSZ 15055-1953 R Ring mine tunnel
MSZ KGST 2814-1980 ring ray
MSZ 2381-1978 Ring nut

German Institute for Standardization

DIN 582:2024-05 Lifting eye nuts

Military Standards (MIL-STD)

MIL MIL-C-48665-1986 CORE; TOROID

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.2.1-1973 Annular Ring Measurement

Society of Automotive Engineers (SAE)

ADS RS256 Ring Nuts
SAE ARP671A-1961 Bearing, Ball Annular

Japanese Industrial Standards Committee (JISC)

JIS R 6254:1994 Endless abrasive belts

Czech Standards Institute (UNMZ)

CSN 25 4261-1961 Screw gauges. Reference gauges for new ring thread "go" gauges. Cycle thread
CSN 25 4263-1961 Screw gauges. Reference gauges on wearing for ring thread "go" gauges. Cycle thread

United States Navy

NAVY DD-G-511 E-1983 GLASS TUBING, ROUND