The thickness of the electrode pad

The thickness of the electrode pad, Total:194 items.

The international standard classification for "The thickness of the electrode pad" includes: Metallic coatings , Copper products , Surface treatment , Testing of metals .

The Chinese standard classification for "The thickness of the electrode pad" includes: Metal physical and chemical property test method in general , Metal physical property test method , Heavy metals and their alloys , Material Protection , Special electronic technology material , Ambient conditions .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8014-1987 Anodizing of aluminium and aluminium alloys--Definitions thickness of anodic oxidation coatings and conventions concerning the measurement of thickness
GB/T 8015.2-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys; Split-beam microscope method
GB 8015.2-1987 Test method for thickness of anodized films on aluminum and aluminum alloys - split beam microscopy
GB/T 30869-2014 Test method for thickness and total thickness variation of silicon wafers for solar cell
GB/T 4955-1997 Metallic coatings-Measurement of coating thickness-Coulometric method by anodic dissolution
GB/T 33970-2017 AI2O3dispersion strengthened copper sheet for resistance welding electrode
GB/T 8015.1-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys; Gravimetric method
GB/T 4955-2005 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
GB 8015.1-1987 Test method for thickness of anodized film on aluminum and aluminum alloys - gravimetric method

未注明发布机构

FORD FLTM BQ 010-01-2000 TEST PROCEDURES FOR ANODIZED ALUMINUM FILM THICKNESS MEASUREMENT
FORD FLTM EU-BQ 010-01-2000 FILM THICKNESS MEASUREMENT FOR ANODIZED ALUMINUM
FORD FLTM BQ 010-1-2000 TEST PROCEDURES FOR ANODIZED ALUMINUM FILM THICKNESS MEASUREMENT
FORD FLTM EU-BQ 010-1-2000 FILM THICKNESS MEASUREMENT FOR ANODIZED ALUMINUM

Hebei Provincial Standard of the People's Republic of China

DB13/T 1513-2012 Battery pole piece rolling equipment

Group Standards of the People's Republic of China

T/SSEA 0202-2022 Lithium battery pole piece rolling mill roll
T/SSEA 0201-2022 Roll blanks for lithium battery pole piece rolling mill rolls
T/CEMIA 028-2022 Specification for surface electrode paste for use in chip resistors
T/ZZB 1912-2020 Nickel powder for electrode of multi-layer ceramic capacitor
T/CEMIA 027-2022 Specification for back electrode paste for use in chip resistors
T/QGCML 030-2020 Conventional Electrical Standards for Diode Diffusion Sheets
T/CASME 901-2023 Lithium battery pole piece punching and cutting mold technical requirements
T/CAS 455-2020 Automatic pole blade scraping machine for Lithium-ion battery
T/HBZXL 011-2023 Technical specification for roller press of battery electrode

Taiwan Provincial Standard of the People's Republic of China

CNS 8406-1989 Methods of Test for Thickness of Anodic Oxidation Coatings on Aluminium and Aluminium Alloys
CNS 13808-1997 Epitaxial Wafers for Light Emitting Diodes
CNS 7218-1981 Silicon Steel Sheets for Pole Core

Professional Standard - Machinery

JB/T 14230-2022 Coating machine for li-ion battery

Professional Standard - Aviation

HB 5652.1-1981 Extreme Values for Climate and Atmospheric Temperature

Professional Standard - Electron

SJ/T 11470-2014 Epitaxial wafers of light-emitting diodes

Association Francaise de Normalisation

NF EN ISO 2128:2010 Anodization of aluminum and its alloys - Determination of the thickness of the anodic layers - Non-destructive method using an optical section microscope
NF A91-404:1966 Surface treatment of metals. Anodizing (anodic oxydizing) of aluminium and its alloys. Measurement of thickness.
NF A91-111:1995 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.
NF EN ISO 2177:2004 Metallic coatings - Thickness measurement - Coulometric method by anodic dissolution
NF A82-105:1985 Electric resistance welding. Straight resistance spot welding electrodes with caps, male taper fits and male caps. Sizes and tolerances (taper 1/10).
NF A91-402:1981 Surface treatments of metals. Anodic oxidation of aluminium and its alloys. Thickness measurements.
NF A91-481*NF EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
NF A91-111*NF EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
NF A91-455-3:1999 Aluminium and aluminium alloys. Anodizing. Part 3 : determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope.
NF A81-304:1994 Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis.

GM North America

GM GM4260P-1988 Measuring Thickness of Electrodeposits and Anodic Coatings
GM 9984070-2014 High Build Cathodic Electrocoat (Issue 8)

Indonesia Standards

SNI 07-0955-1989 Test method for thickness of anodic coatings

Korean Agency for Technology and Standards (KATS)

KS D ISO 2177-2002(2022) Measurement of coating thickness - Coulometric method by anodic dissolution
KS D ISO 2177-2022 Measurement of coating thickness - Coulometric method by anodic dissolution
KS D ISO 2177-2002(2017) Measurement of coating thickness - Coulometric method by anodic dissolution
KS D ISO 2128-2011(2021) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 2128-2011(2016) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 2128-2021 Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D 5584-2004 NICKEL SHEETS AND STRIPS FOR CATHODE OF ELECTRONIC TUBE
KS D ISO 2177:2002 Measurement of coating thickness - Coulometric method by anodic dissolution
KS B ISO 26304-2016 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification
KS D ISO 2128:2011 Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D 8310-2001(2016) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS D 0259-2012 Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS D 8310-2021 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS D 8310-2001(2021) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS D 0259-2012(2017) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS D 0259-2022 Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS D 0259-2012(2022) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS D 7031-2012(2017) Magnesium galvanic anodes for cathodic protection

Danish Standards Foundation

DS/ISO 2177:1986 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
DANSK DS/ISO 20168:2020 Resistance welding – Locking tapers for electrode holders and electrode caps
DS/EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
DS/EN ISO 20168:2021 Resistance welding – Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
DANSK DS/EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
DS/EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
DANSK DS/EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
DANSK DS/EN ISO 20168:2021 Resistance welding – Locking tapers for electrode holders and electrode caps (ISO 20168:2016)

South African Bureau of Standard

SANS 2177:1986 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
SANS 2177:2008 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution

International Organization for Standardization (ISO)

ISO 2177:1985 Metallic coatings; Measurement of coating thickness; Coulometric method by anodic dissolution
ISO 2177:1972 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
ISO 2128:1976 Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope
ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
ISO 2177:2003 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
ISO 5821:2025 Resistance welding. Spot welding electrodes. Female electrode caps
ISO 2177 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
ISO 5827:1983 Spot welding; Electrode back-ups and clamps

IT-UNI

UNI EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps
UNI 7796-1977 Anodized layer of aluminum and aluminum alloys. Thickness anodization. General provisions for requirements and inspections

Spanish Association for Standardization (UNE)

UNE-EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
UNE-EN 3773-006:2017 Aerospace series single pole circuit breakers temperature compensated rated current 1A to 25A Part 006: Product specification for blade terminals with a thickness of 6.3mm
UNE-EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
UNE-EN ISO 2177:2005 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)
UNE 14-211-1985 Determination of humidity in coated electrodes
UNE 14211:1985 DETERMINATION OF TOTAL HUMIDITY IN COATED ELECTRODES.
AENOR UNE-EN ISO 2177:2005 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)
UNE 38 013 Determine the thickness of the anodized layer of aluminum and aluminum alloys. Method based on Foucault's pendulum

German Institute for Standardization

DIN EN ISO 20168:2021-03 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016); German version EN ISO 20168:2021
DIN EN ISO 2177:2004-08 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003); German version EN ISO 2177:2004
DIN EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003); German version EN ISO 2177:2004
DIN EN ISO 20168:2020-09 Draft Document - Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016); German and English version prEN ISO 20168:2020
DIN EN ISO 2128:2010-12 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010); German version EN ISO 2128:2010
DIN EN ISO 2128 E:2009-07 Draft Document - Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO/DIS 2128:2009); German version prEN ISO 2128:2009
DIN 44750-7:1976 Electrode shaft with external taper 1:10 and parallel fixed axis

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 20168:2022 Resistance welding — Locking tapers for electrode holders and electrode caps
BH GSO ISO 2128:2016 Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Non-destructive measurement by split-beam microscope

GCC Standardization Organization

GSO ISO 20168:2021 Resistance welding — Locking tapers for electrode holders and electrode caps
GSO ISO 2177:2013 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution

Standard Association of Australia （SAA）

AS 2039.1.4:1978 Methods for testing anodic oxidation coatings on aluminium and aluminium alloys, Part 1.4: Thickness and related property tests - Average thickness of anodic oxidation coatings by eddy current method
AS 2039.1.3:1978 Methods for testing anodic oxidation coatings on aluminium and aluminium alloys, Part 1.3: Thickness and related property tests - Average thickness of anodic oxidation coatings by strip and weigh method
AS 2039.1.1:1978 Methods for testing anodic oxidation coatings on aluminium and aluminium alloys, Part 1.1: Thickness and related property tests - Local thickness of anodic oxidation coatings by micrographic examination of cross-sections
AS 2039.1.2:1978 Methods for testing anodic oxidation coatings on aluminium and aluminium alloys, P:art 1.2: Thickness and related property tests - Local thickness of anodic oxidation coatings by optical split-beam microscope

Defense Logistics Agency

DLA SMD-5962-88598 REV A-1990 MICROCIRCUITS, DIGITAL, BIPOLAR CLOCK GENERATOR/MICROCYCLE LENGTH CONTROLLER, MONOLITHIC SILICON
DLA MIL-M-38510/150 D VALID NOTICE 1-2009 Microcircuits, Digital, Bipolar, TTL, Magnitude Comparators, Monolithic Silicon
DLA SMD-5962-88605 REV B-2001 MICROCIRCUIT, DIGITAL, BIPOLAR HIGH PERFORMANCE 10-BIT BUFFER, MONOLITHIC SILICON
DLA MIL-M-38510/82 C VALID NOTICE 1-2010 Microcircuits, Digital, Bipolar, Schottky TTL, Magnitude Comparators, Monolithic Silicon
DLA SMD-5962-88677 REV C-2009 MICROCIRCUIT, DIGITAL, 4-BIT BIPOLAR MICROPROCESSOR SLICE, MONOLITHIC SILICON

Japanese Industrial Standards Committee (JISC)

JIS H 8680:1993 Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys
JIS H 8680-2:1998 Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Eddy current method
JIS H 0611:1994 Methods of measurement of thickness, thickness variation and bow for silicon wafer

Ente Nazionale Italiano di Unificazione

UNI 6717:1990 Anodizing of aluminium and aluminium alloys. Thickness measurement by the eddy current method.
UNI SPERIMENTALE 6916:1971 Classification and performance qualification of electric welders. Welders for medium and thick plates with electrodes of austenitic stainless steel or nickel alloy.
UNI EN 12373-3:2000 Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non- destructive measurement by split-beam microscope
UNI EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
UNI ISO 2177:1988 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.
UNI 7796:2010 Anodic oxidation coatings on aluminium and aluminium alloys - Hard anodic films of great thickness - Requirements and general instructions of test
UNI EN ISO 2177:1998 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
UNI EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Parallel shank fixing for end-thrust electrodes
UNI 7796:1997 Anodic oxidation coatings on aluminium and aluminium alloys. Hard anodic films of great thickness. Requirements and general instructions of test.

FI-SFS

SFS-ISO 2177:1986 n case of interpretation disputes the English text applies

British Standards Institution (BSI)

BS EN ISO 20168:2021 Resistance welding. Locking tapers for electrode holders and electrode caps
BS EN ISO 2177:2004 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS EN ISO 2177:2005 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
BS EN ISO 2177:1995 Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS 4215-3:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for the dimensions of electrode taper fits
BS 4215-6:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10
BS 4215-11:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for electrode holders, taper fixing 1:10
BS 4215-12:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for electrode holders, Morse taper fixing
BS 4215-10:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for electrode adaptors, male taper 1:10, parallel shank fixing for end thrust electrodes
BS 6161-2:1981 Methods of test for anodic oxidation coatings on aluminium and its alloys-Determination of thickness of anodic oxide coatings: non-destructive measurement by split-beam microscope
BS EN ISO 2128:2010 Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
BS EN ISO 5821:2025 Resistance welding. Spot welding electrodes. Female electrode caps
09/30195834 DC BS EN ISO 2128. Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
BS 4215-4:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for taper plug gauges and taper ring gauges
BS 4215-4:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for taper plug gauges and taper ring gauges
BS 4215-5:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for electrode back-ups and clamps
BS 4215-9:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment-Specification for electrode adaptors, male taper 1:10, conical fixing 1:10

AT-ON

OENORM EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)

GOST

GOST R 71638-2024 Substrates made of inorganic dielectrics. Method for determining the ultimate strength

Lithuanian Standards Office

LST EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
LST EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
LST EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)

PL-PKN

PN-EN ISO 20168-2021-07 E Resistance welding -- Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
PN H04606-01-1990 Aluminium and aluminium alloys Test methods of anodic oxide coatings Measurement of thickness
PN T01504-22-1987 Transistors Measuring methods Collector-base and emitter-base capacitances Ccbo and Cebo

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 2128:2015 Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Non-destructive measurement by split-beam microscope

Standards Norway

NS 1182-1979 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic solution
NS-EN ISO 20168:2021 Resistance welding — Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
NS-EN ISO 2128:2010 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope (ISO 2128:2010)
NS-EN 12373-3:1998 Aluminium and aluminium alloys — Anodizing — Part 3: Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
NS-EN ISO 2177:1994 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution (ISO 2177:1985)
NS 1182:1979 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic solution

CZ-CSN

CSN 03 8150-1975 Anodized aluminium. Measurement of coating tbickntss and sealing
CSN 35 8757 Cast.1-1985 Transistors. Measuring method of collector-base and emitterbase breakdown voltage
CSN 05 5016-1985 Coated electrodes for arc welding and surfacLng. Determination of humidity in the electrode coating

YU-JUS

JUS C.T7.228-1984 Anodic oxidation of a/uminium and aluminium allols. Measurement of thickness of oxide coatings. Eddy current method
JUS C.A6.033-1989 Metallic coatings. Measurement of coating thlckness. Coulometric method by anod'ic dlssolution
JUS C.T7.226-1984 Anodic oxidation of afuminium and aluminium alloys. Microscopic determination of thickness of oxide coating
JUS N.R2.624-1980 Polar tantahim electrolytic capacitors with sintered anode and solid electrolyte without protected-layer - tantahim chip capacitors (type 3A2), 6,3 to 35 V d.c. Climatic severities 55/125/

European Committee for Standardization (CEN)

EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
EN ISO 2177:1994 Metallic Coatings - Measurement of Coating Thickness - Coulometric Method by Anodic Dissolution (ISO 2177 : 1985)
EN ISO 2177:2004 Metallic Coatings - Measurement of Coating Thickness - Coulometric Method by Anodic Dissolution

VN-TCVN

TCVN 5876-1995 Anodizing of aluminium and its alloys.Determination of thickness of anodic oxide coatings.Non.destructive measurement by split.beam microscope

CH-SNV

VSM 34130-1934 Anodizing of aluminum and aluminum alloys. Determination of anodic oxide film thickness. Non-destructive measurements using beam splitting microscopy
VSM 18653.1-1965 Anodizing of aluminum and aluminum alloys. Determination of anodic oxide film thickness. Non-destructive measurements using beam splitting microscopy
SNV 24626-1938 Anodizing of aluminum and aluminum alloys. layer thickness
VSM 23890-1971 Anodizing of aluminum and aluminum alloys. Determination of cross-sectional thickness by microscopic examination

Gosstandart of Russia

GOST 18604.27-1986 Power high-voltage bipolar transistors. Collector-base (emitter-base) breakdown voltage measurement at emitter (collector) cut-off current
GOST 15613.4-1978 Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 15613.1-1984 Glued massive wood. Methods for determination of glued joint of ultimate strength while shearing palong grain

SE-SIS

SIS SS 11 70 30-1980 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measure ment by split-beam microscope
SIS SS-ISO 2128:1984 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxide coatings - Non-destructive mea- surement by split-beam microscope
SIS SS 14 34 25-1984 Welding electrodes - Wire electrode
SIS SS 14 34 23-1984 Welding electrodes - Wire electrode
SIS SS-ISO 2177:1986 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
SIS SS 14 34 04-1984 Welding electrodes - Wire electrode
SIS SS 14 34 22-1984 Welding electrodes - Wire electrode
SIS SS 14 34 02-1984 Welding electrodes - Wire electrode

U.S. Military Regulations and Norms

ARMY MIL-PRF-55365/12 D (2)-2008 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, STYLE CWR15

Magyar Szabványügyi Testület

MSZ 6813/2-1981 spot welding electrode capped electrode

National Association of Corrosion Engineers (NACE)

NACE Paper 07228-2016 Study on cathodic protection using specific anodes in soil

PT-IPQ

E 297-1974 Anodized aluminum. Determination of surface thickness. by micro-measurement

Electronic Components, Assemblies and Materials Association

EIA/ECA-956-2006 Aluminum Electrolytic Chip Capacitor with Polmer Cathode
EIA_ECA-956-2006 Aluminum Electrolytic Chip Capacitor with Polmer Cathode
EIA/ECA-953-2006 Molded Tantalum Chip Capacitor with Polymer Cathode
EIA_ECA-953-2006 Molded Tantalum Chip Capacitor with Polymer Cathode
ECA 348-1968 Magnetic Field Polarity, Including Definitions and Determination of Polarity

TR-TSE

TS 3179-1978 METALIC COATINGS - MEASUREMENT OF COATING THICKNESS - COULOMETRIC METHOD BY ANODIC DISSOLUT?ON

American Society for Testing and Materials (ASTM)

ASTM B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM F533-02 Standard Test Method for Thickness and Thickness Variation of Silicon Wafers
ASTM F533-96 Standard Test Method for Thickness and Thickness Variation of Silicon Wafers
ASTM B764-04(2021) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

Swedish Institute for Standards

SS-EN ISO 2177:2004 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003)

Others: Electrode Piece Thickness,The thickness of the electrode pad,The thickness of the battery pole piece