Transmission Test Equipment

Transmission Test Equipment, Total:478 items.

The international standard classification for "Transmission Test Equipment" includes: Electrical engineering in general , Power transmission and distribution networks in general , Transmission systems , Electrical engineering (Vocabularies) , Measurement of electrical and magnetic quantities , Power stations in general , Diagnostic equipment , Equipment for petroleum and natural gas industries in general , Other telecommunication terminal equipment , Telecommunication systems , Rectifiers. Convertors. Stabilized power supply , Plug-and-socket devices. Connectors .

The Chinese standard classification for "Transmission Test Equipment" includes: Electric power testing technique , Power plant and electric power system operating maintenance , Basic standards and general methods , Electric energy measurement and load control system , Medical apparatus and devices in general , Petroleum drilling & production equipment and instrument , Telephone communication equipment , Facsimile telegraph equipment , Power semiconductor device and parts , Connector , Electric drive control equipment .

Group Standards of the People's Republic of China

T/BEA 40003-2023 Calibration Specification of Transient Resistance Test Equipment
T/HBAS 002-2021 Field test specification for electric vehicle charging equipment
T/CCCTA 0045-2024 Classification of corrosion environments for power transmission and transformation equipment
T/CCCTA 0046-2024 Code for corrosion controlling design of power transmission and transformation equipment
T/ZJSEE 0001-2023 Code of practice for start-up test of new equipment for 500 kV power transmission and transformation project
T/CSEE 0206-2021 "Technical specification for power module test equipment of flexible high-voltage
T/HBAS 025-2021 Data specification for testing and testing of power transmission and transformation equipment
T/HBAS 026-2021 Communication protocol for data acquisition and testing of power transmission and transformation equipment
T/CIET 19-2023 Push rod motor load test equipment
T/CSEE 0006-2016 Test specification of live working robot for electric transmission and transformation equipment
T/CCCTA 0048-2024 Test methods for laboratory performance of anti-corrosion materials of power transmission and transformation tquipment
T/SPEMF 0033-2022 General specification for electromagnetic handwriting input devices
T/APD 0004-2021 Offshore Wind Power Equipment Transportation Specifications
T/ZJSEE 0021.4-2023 Flexible low-frequency alternating current power transmission—Part 4: Hand-over test code of high-voltage electric equipment
T/CCCTA 0054-2024 Corrosion and rust layer thickness detection methods for power transmission and transformation equipment

Professional Standard - Energy

NB/T 25016.11-2013 Surveillance Guide for Conventional Island Equipment in Nuclear Power Plants - Part 11: Power Transmission and Distribution Equipment
DL/T 393-2021 Condition-based maintenance test procedures for power transmission and transformation equipment

Professional Standard - Electricity

DL/T 247-2012 Copper-clad aluminium bus bars for equipments of transmission and commutation
DL/T 393-2010 Regulations of condition-based maintenance & test for electric equipment
DL/T 1730-2017 Test specification for electric power information network equipment

未注明发布机构

IEEE Std 62.2-2004(R2009) IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery
IEEE Std 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
DIN 18867-7 E:2020-02 Equipment for commercial kitchens - Mobile equipment - Part 7: Food transport trolley - Requirements and testing
DIN 14427:1995 Firefighting equipment - Explosion-proof portable transfer pump for dangerous fluids, with electric motor - Requirements, testing
DIN EN 1474-2 E:2019-09 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 311.1-1997 Insulation co-ordination for high voltage transmission and distribution equipment
GB/T 17627.2-1998 High-voltage test techniques for low-voltage equipment Part 2: Measuring system and test equipment
GB/T 43867-2024 E-Transporters—Terminology and classification
GB/T 13855-1992 Specification for path transmission automatic measuring equipment
GB/T 43974-2024 General specifications of cargo e-Transporters
GB/T 17215.211-2006 Electricity metering equipment (AC)—General requirements, tests and test conditions— Part 11: Metering equipment

Taiwan Provincial Standard of the People's Republic of China

CNS 14320-1999 Digital test patterns for performance measurements on digital transmission equipment
CNS 12491.5-1989 Graphical Symbols for Use on Electrical and Electronic Equipment (Digital Transmission)
CNS 12491-5-1989 Graphical Symbols for Use on Electrical and Electronic Equipment (Digital Transmission)

Professional Standard - Medicine

YY/T 0841-2011 Medical electrical equipment—Recurrent test and test after repair of medical electrical equipment
YY/T 0841-2023 Medical electrical equipment---Recurrent test and test after repair ofmedical electrical equipment

国家能源局

NB/T 10189-2019 Power transmission and transformation equipment. Atmospheric environmental conditions. Monitoring methods
NB/T 10279-2019 Warm-damp environmental conditions for power transmission and transformation equipments

Professional Standard - Petroleum

SY/T 6986.2-2016 Installation and equipment for liquefied natural gas.Design and testing of marine transfer systems.Part 2: Design and testing of transfer hoses
SY/T 6325-1997 The stipulation of technical management of electrical equipment for oil and gas pipelines
SY/T 6986.1-2014 Installation and equipment for liquefied natural gas.Design and testing of marine transfer systems.Part 1: Design and testing of transfer arms
SY 6986.1-2014 LNG Equipment and Installation Design and Testing of Marine Transfer Systems Part 1: Design and Testing of Transfer Arms
SY 6986.2-2016 Liquefied natural gas equipment and installation Design and testing of marine transfer systems Part 2: Design and testing of transfer hoses

Military Standard of the People's Republic of China-General Armament Department

GJB 3947A-2009 General apecification for military electronic test equipment
GJB 5936-2007 Interface of automatic test equipment for military electronic materiel
GJB 1622-1993 General specification for test equipment for aeronautical electrical and electronic equipment
GJB 3947-2000 General specification for military electronic test equipment

Professional Standard - Electron

SJ/Z 9036-1987 Electrical and electronic measuring and testing equipment
SJ 20136-1992 Shock measurement and data processing methods for military electronic equipments

Professional Standard - Post and Telecommunication

YD/T 1072-2006 Testing method for IP telephony gateway
YD/T 2379.6-2012 Environmental test requirements and test methods for telecommunications equipment Part 6: Transportation
YD/T 1686-2007 Speech Quality and Transmission Performance Requirements and Testing Methods for IP Telephony Terminal Equipment
YD/T 635-1993 Inspection and Test Methods of Telegraph Terminal Equipment
YD 5091.2-2014 Specification for Seismic Test of Transmission EquipmentPart2 Satellite Earth Station Transmission Equipment
YD 5091.1-2015 Specification for Seismic Test of Transmission Equipment Part l:Optical Transmission Equipment
YD/T 1072-2000 Testing method for IP telephony gateway
YD/T 939-2014 Power distribution cabinet for transmission equipment
YD/T 939-2005 Power distributing file cabinet for transfer equipment
YD/T 1686-2011 Speech quality and transmission performance requirements and testing methods for IP telephony equipment

工业和信息化部

YD/T 2379.6-2022 Environmental test requirements and test methods for telecommunications equipment- Part 6:Transportation

Professional Standard - Aviation

HB 7271-1996 Design criteria for test setups in electronic equipment
HB 6167.18-1989 Environmental conditions and test methods for civil aircraft airborne equipment power input test

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36956-2018 Testing of voltage sourced converter valve base control unit for high-voltage direct current power transmission using voltage sourced converters
GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 11：Metering equipment
GB/T 5095.2504-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay

Professional Standard - Machinery

JB/T 6328-1992 Electronic Control Unit of AC Drive Steel Core Belt Conveyors. Test Method

Professional Standard - Railway

TB/T 2766-1996 Test rules for test equipment of locomotive electronic equipment

AT-ON

ONORM K 2010-1983 Transfusion equipment; concepts, requirements, fest
ONORM E 1371-1978 Testing devices; Impact-Test-Apparatus
ONORM M 7535-6-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the feed pressure - Requirements, testing, marking of conformity
ONORM E 1351-1986 Test equipment; jointed test finger
OENORM EN 1474-2-2021 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
ONORM M 9606 Teil.1-1980 Round steel chains, tested, welded, jor lijting appliances and conveyer Systems; calibrated
ONORM M 1349-1997 Verification of measuring and test equipment - Testing Instruction for measuring tapes

SCC

ESD STM5.5.1-2022 Electrostatic Discharge Sensitivity Testing--Transmission Line Pulse (TLP)--Device Level
ETSI ETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
BS 5841-7:1980 Photographic flash equipment-Methods for determination of the light output of electronic flash equipment
CEI EN 50699:2021 Recurrent Test of Electrical Equipment
NZS 3019:2004 Electrical installations - In-service testing
DANSK DS/EN 50699:2020 Recurrent Tests of Electrical Equipment
UL 9741-2023 Electric Vehicle Power Export Equipment (EVPE)
NS-EN 1474-2:2008 Installation and equipment for liquefied natural gas — Design and testing of marine transfer systems — Part 2: Design and testing of transfer hoses
DANSK DS/EN 1474-2:2020 Installation and equipment for liquefied natural gas – Design and testing of marine transfer systems – Part 2: Design and testing of transfer hoses
CSA C22.2 No.348-2023 Electric vehicle power export equipment (EVPE)
AENOR UNE-EN 1474-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
NS-EN 1474-2:2020 Installation and equipment for liquefied natural gas — Design and testing of marine transfer systems — Part 2: Design and testing of transfer hoses
VDE VDE 0701-0702 Pruefung nach Instandsetzung, Aenderung elektrischer Geraete - Wiederholungspruefung elektrischer Geraete - Allgemeine Anforderungen fuer die elektrische Sicherheit
AENOR UNE-EN 62052-11:2004 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
AENOR UNE-EN 62052-11/A1:2018 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
CEI EN 60512-23-4:2003 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
04/30092090 DC ISO 20039. Acoustical test methods and sound power equipment rating procedure for transportation refrigeration equipment
DANSK DS/ISO 28620:2020 Medical devices – Non-electrically driven portable infusion devices
VDI/VDE/DGQ/DKD 2622 BLATT 9.1:2019 Calibration of measuring instruments for electrical quantities — Test equipment for determining electrical safety — Electrical equipment according to DIN VDE 0701-0702
AS 3551:1988 Acceptance testing and in-service testing - Electromedical equipment
DANSK DS/EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
CEI EN 60512-23-7:2006 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DANSK DS/EN 300 019-2-2 V2.4.1:2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
ETSI EN 300 019-2-2-2017 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
DANSK DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
06/30158810 DC BS EN 1474-2. Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Part 2. Design and testing of transfer hoses
AENOR UNE-EN 62052-21:2006 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 21: Charging and charging control equipment. (IEC 62052-21:2004)
DIN EN 50699 E:2019 Draft Document - Recurrent Test of Electrical Equipment; German and English version prEN 50699:2019
DIN EN 62353 E:2012 Draft Document - Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62A/798/CD:2012)
CEI EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements Part 22-1: Capacitance tests - Test 22a: Capacitance
UNE-EN 50191:2002 Erection and operation of electrical test equipment
AAMI/IEC TIR62354:2009 General testing procedures for medical electrical equipment
CEI EN 50191:2011 Erection and operation of electrical test equipment
VDI/VDE/DGQ 2618 BLATT 11.4:2016 Test equipment monitoring — Test instructions for electronic digital dial gauges
DANSK DS/IEC/TR 62354:2009 General testing procedures for medical electrical equipment
DIN 18867-7 E:2020 Draft Document - Equipment for commercial kitchens - Mobile equipment - Part 7: Food conveyors - Requirements and testing
BS ISO 16750-2:2006 Road vehicles. Environmental conditions and testing for electrical & electronic equipment-Electrical loads
DANSK DS/EN 60512-23-4:2001 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections of connectors in the time domain
DANSK DS/EN 62052-11/A1/AC:2018 Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment
DIN 8958-3 E:2011 Draft Document - Testing of cooling equipment for insulated means of transportation - Part 3: Transport refrigerating systems with dry ice
CEI EN 60835-3-11:1997 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission
DANSK DS/EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
VDI/VDE/DGQ/DKD 2618 BLATT 11.4:2020 Test equipment monitoring — Test instructions for electronic digital dial gauges
DANSK DS/EN 50191:2010 Erection and operation of electrical test equipment
DANSK DS/ISO 15727:2020 UV-C devices – Measurement of the output of a UV-C lamp
IEC TS 61278:1997 Live working - Guidelines for dielectric testing of tools and equipment
AS 3202:1989 Approval and test specification - Electrosurgical equipment
MIL MIL-PRF-28800F-1996 TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-T-28800E)
CEI EN 61557-14:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 14: Equipment for testing the safety of electrical equipment of machinery

ESD - ESD ASSOCIATION

STM5.5.1-2016 Electrostatic Discharge Sensitivity Testing – Transmission Line Pulse (TLP) – Device Level

U.S. Military Regulations and Norms

ARMY MIL-T-12681 A-1955 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A VALID NOTICE 1-1986 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-T-12681 A NOTICE 2-1997 TEST SET, TELEPHONE (TEST SET TS-190)(/U)
ARMY MIL-HDBK-172 A VOL I CHG NOTICE 2-1965 ELECTRONIC TEST EQUIPMENT
ARMY MIL-T-13016 E-1977 TEST SET, IGNITION COIL-CAPACITOR-RESISTOR
ARMY MIL-T-49243 A-1988 TEST SET, TELEPHONE TS-3647/G
ARMY MIL-T-12242 A-1963 TEST SET, TELEPHONE TS-716( )/U
ARMY MIL-T-49243 A NOTICE 1-1997 TEST SET, TELEPHONE TS-3647/G
ARMY MIL-T-12242 A NOTICE 1-1996 TEST SET, TELEPHONE TS-716( )/U

International Telecommunication Union (ITU)

ITU-T O.22 SPANISH-1992 CCITT AUTOMATIC TRANSMISSION MEASURING AND SIGNALLING TESTING EQUIPMENT ATME No. 2
ITU-T Q.135-1989 Principles of Rapid Transmission Testing Equipment - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 1 pp
ITU-T O.22 FRENCH-1992 CCITT AUTOMATIC TRANSMISSION MEASURING AND SIGNALLING TESTING EQUIPMENT ATME No. 2
ITU-T Q.135-1988 Principles of rapid transmission testing equipment
ITU-T Q.164-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T Q.331-1989 Test Equipment for Checking Equipment and Signals - Specifications of Signalling Systems R1 and R2 (Study Group XI) 3 pp
ITU-T O.201 FRENCH-2003 Q-factor test equipment to estimate the transmission performance of optical channels
ITU-T Q.412-1988 Clauses for exchange line signalling equipment; Clauses for transmission line signalling equipment
ITU-T O.201 SPANISH-2003 Q-factor test equipment to estimate the transmission performance of optical channels

CZ-CSN

CSN EN 61373 ZZ1-2003 Railway equipment. Railway transportation equipment. Impact and vibration testing
CSN 14 0680-1984 Testing of thermal insulated conveyance equipment for transport of perishable foodstuffs
CSN IEC 736:1992 Testing equipment for electrical energy meters
CSN 35 4055 Cast.54-1988 Electromechanical components for electronic equipment; coding device test
CSN 34 1330-1974 Code for electrical equipment in conveyances
CSN 26 0004-1984 Transportation equipment. Testing, delivery operating, maintenance and repairs
CSN OEG 38 1020-1966 Acceptance tests of power station equipments
CSN 35 4055 Cast.97-1988 Electromechanical components for electronic equipment. Capacitance tests
CSN ON 43 4060-1961 Transportation Equipment
CSN 35 3054-1964 Impulse-voltage tests of electrical switching apparatuses
CSN 35 4055 Cast.27-1988 Electromechanical components For electronic equipment. Electrical overload test
CSN 35 4055 Cast.8-1984 Electromechanical components for electronic equipment. Insulation resistance test
CSN 34 5642-1982 Electrical apparatus and eguipment. Measuring methods in highvoltage tests
CSN 34 5729-1985 Electrotechnical and radioelectronical devices. Basic environmental testing procedures. Tests — Sealing
CSN 30 4003-1974 Test of electrical and lighting equipment for motor vehicles
CSN IEC 233:1994 Tests on hollow insulators for use in electrical equipment

Korean Agency for Technology and Standards (KATS)

KS B 6359-1983 Testing method for mechanical transport refrigeration units
KS B 6359-2008(2018) Testing method for mechanical transport refrigeration units
KS B 6359-2023 Testing method for mechanical transport refrigeration units
KS C IEC 61308:2012 High-frequency dielectric heating installations－Test methods for the determination of power output
KS C IEC 60512-23-4-2014 Connectors for electronic equipment－Tests and measurements－Part 23－4：Screening and filtering tests－Test 23d：Transmission line reflections in the time domain
KS A ISO 2827-2023 Photography-Electronic flash equipment-Determination of light output and performance
KS C IEC 60512-23-7-2014 Connectors for electronic equipment－Tests and measurements－Part 23-7：Screening and filtering tests－Test 23g：Effective transfer impedance of connectors
KS A ISO 2827-2003(2018) Photography-Electronic flash equipment-Determination of light output and performance
KS C IEC 61307:2012 Industrial microwave heating installations-Test methods for the determination of power output
KS C IEC 61204-A-2014(2019) Low-voltage power supply devices, d.c. output — Performance characteristics
KS C IEC 62052-11:2005 Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment
KS R 5013-2002 NOMINAL VOLTAGES AND TEST VOLTAGES FOR AUTOMOTIVE ELECTRIC EQUIPMENTS
KS C 6047-1995(2020) Testing methods of power transformers for electronic equipment
KS C 0903-2003 Vibration testing procedure for electric machines and equipment

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0600002-2005 Testing of Telecommunications Equipment
ATIS 0600015.02-2014 Energy Efficiency for Telecommunication Equipment: Methodology for Measurement and Reporting - Transport Requirements

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETSI PRETS 300 019-2-2-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests T 2.1 to T 2.3 Transportation
ETSI PRETS 300 132-1990 Equipment Engineering Power Supply Interface at the Input to Telecommunications Equipment (DE/EE-2001)
ETSI PRETS 300 019-1-2-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-2: Classification of Environmental Conditions Transportation
ETSI ETS 300 019- 2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETSI PRETS 300 017-1993 Terminal Equipment (TE); Test Procedures for Teletex
ETSI PRETS 300 328-1994 Radio Equipment and Systems (RES); Wideband Data Transmission Systems Technical Characteristics and Test Conditions for Data Transmission Equipment Operating in the 2,4 GHz ISM Band and Using Spread Spectrum Modulation Techniques
ETSI PRETS 300 328-1993 Radio Equipment and Systems (RES); Wideband Data Transmission Systems Technical Characteristics and Test Conditions for Data Transmission Equipment Operating in the 2,4 GHz ISM Band and Using Spread Spectrum Modulation Techniques

German Institute for Standardization

DIN EN 1474-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses; English version of DIN EN 1474-2:2009-02
DIN EN 1474-3:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems; English version of DIN EN 1474-3:2009-02
DIN EN 1474-2:2021 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses; German version EN 1474-2:2020
DIN EN 1474-2:2021-04 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses; German version EN 1474-2:2020 / Note: This standard is part of the DVGW body of rules.
DIN 18867-7:2021-10 Equipment for commercial kitchens - Mobile equipment - Part 7: Food transport trolley - Requirements and testing / Note: DIN 18867-7 (2012-11) remains valid alongside this standard until 2022-03-31.
DIN EN 60512-23-7:2005-10 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors (IEC 60512-23-7:2005); German version EN 60512-23-7:2005
DIN 18867-7:2021 Equipment for commercial kitchens - Mobile equipment - Part 7: Food transport trolley - Requirements and testing
DIN 22256:2002-10 Chain sprockets for chain conveyors and coal winning equipment - Dimensions, requirements, testing
DIN 14427:2013-12 Firefighting equipment - Explosion-proof portable transfer pump for dangerous fluids, with electric motor - Requirements, testing
DIN 65092:1990-11 Aerospace; environmental tests for aircraft equipment; insulation resistance and high voltage tests for electrical equipment; identical with ISO 2678:1985
DIN 18864:2016-12 Equipment for commercial kitchens - Heat-insulated container for food transport, requirements and testing
DIN VDE 0404-3:2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems

CN-QIYE

Q/GDW 1168-2013 Condition-based maintenance test procedures for power transmission and transformation equipment

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
VDE 0702-2019 Recurrent Test of Electrical Equipment; German and English version prEN 50699:2019
VDE 0404-2-2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair@ change or in case of repeat tests
VDE V 0161-235-1998 Aeronautical ground lighting electrical installation - Signs - Equipment specifications and tests; German version ENV 50235:1997
VDE V 0161-234-1998 Aeronautical ground lighting electrical installation - Flashing lights - Equipment specifications and tests; German version ENV 50234:1997
VDE 0104-2011 Erection and operation of electrical test equipment; German version EN 50191:2010

ATIS - Alliance for Telecommunications Industry Solutions

0600002-2005 Testing of Telecommunications Equipment
0600015.02-2014 Energy Efficiency for Telecommunication Equipment: Methodology for Measurement and Reporting - Transport Requirements
0600015.02-2009 Energy Efficiency for Telecommunication Equipment: Methodology for Measurement and Reporting - Transport Requirements

Association Francaise de Normalisation

NF EN 60512-16-6:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-6 : essais mécaniques des contacts et des sorties - Essai 16f : robustesse des sorties
NF EN 62353:2015 Appareils électromédicaux - Essai récurrent et essai après réparation d'un appareil électromédical
NF EN 50699:2020 Essais récurrents des appareils électriques
NF EN 60512-23-4:2002 Connectors for electronic equipment - Tests and measurements - Part 23-4: shielding and filtering tests - Test 23d: transmission line reflections in time domain
NF EN 60512-16-2:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-2 : essais mécaniques des contacts et des sorties - Essai 16b : entrée restreinte
NF EN 1474-2:2020 Liquefied natural gas installations and equipment - Design and testing of marine transfer systems - Part 2: design and testing of transfer hoses
NF Z87-019-25:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-5 : specification of environmental tests. Ground vehicle installations.
NF EN IEC 60268-21:2018 Équipements pour systèmes électroacoustiques - Partie 21 : mesures acoustiques (en sortie)
NF EN 60512-16-1:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-1 : essais mécaniques des contacts et des sorties - Essai 16a : endommagement par sonde d'essai
NF EN 15564:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN 60512-16-3:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN ISO 15744:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN 60512-16-18:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-18 : essais mécaniques des contacts et des sorties - Essai 16r : débattement des contacts, simulation
NF EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: screening and filtering tests - Test 23g: effective transfer impedance of connectors
NF EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic test procedures and measurement methods - Part 16: mechanical testing of contacts and outputs. Section 20: 16t test: mechanical strength (cable output of connections...
NF M51-004-1:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1 : design and testing of transfer arms.
NF M51-004-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2 : design and testing of transfer hoses.
NF C53-224:1982 Power electronics. Stabilized power supplies A.C. output.
NF Z87-019-22:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-2 : specification of environmental tests. Transport.
NF EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14: mechanical tests of contacts and outputs - Test 16n: bending resistance of fixed tabs
NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1: capacitance tests - Test 22a: capacitance
NF EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: mechanical tests of contacts and outputs - Test 16d: tensile strength (crimped connections)
NF EN 60512-16-11:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-11 : essais mécaniques des contacts et des sorties - Essai 16k : force d'arrachement, connexions enroulées sans soudure
NF EN 60512-16-16:2009 Connectors for electronic equipment - Tests and measurements - Part 16-16: mechanical tests of contacts and outputs - Test 16p: resistance to torsion of fixed tabs
NF F48-123:1992 Railway fixed equipment. Modular power supply units for signalling equipment, telecommunication equipment and computer equipment. Battery cabinet.
NF Z87-019-2-2*NF EN 300019-2-2:2018 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2 : specification of environmental tests - Transportation (V2.4.1)
NF EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: mechanical tests of contacts and outputs - Test 16e: gauge retention force (elastic contacts)
NF EN 61000-4-14/A2:2009 Electromagnetic compatibility (EMC) - Part 4-14: testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current less than or equal to 16 A per phase
NF EN 300019-2-2:2018 Environmental Engineering (EE) - Environmental conditions and environmental testing of telecommunications equipment - Part 2-2: Environmental testing specification - Transport (V2.4.1)
NF C53-222:1987 Power electronics. Stabilized power supplies,D.C. output.
NF C18-191*NF EN 50191:2011 Erection and operation of electrical test equipment
NF EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: mechanical tests of contacts and outputs - Test 16g: measurement of the deformation of a contact after crimping
NF EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: mechanical tests of contacts and outputs - Test 16i: holding force of the grounding contact spring
NF C44-052-11*NF EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11 : metering equipment
NF C44-052-11/A1*NF EN 62052-11/A1:2017 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11 : metering equipment
NF EN 60512-16-17:2009 Connectors for electronic equipment - Tests and measurements - Part 16-17: mechanical tests of contacts and outputs - Test 16q: resistance to traction and compression of fixed tabs
NF EN 60512-16-8:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-8 : essais mécaniques des contacts et des sorties - Essai 16h : efficacité du manchon isolant (connexions serties)
NF C79-661:1997 Industrial microwave heating installations. Test methods for the determination of power output.
NF EN 60512-16-13:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-13 : essais mécaniques des contacts et des sorties - Essai 16m : déroulement, connexions enroulées sans soudure
NF C79-661:2006 Industrial microwave heating installations - Test methods for the determination of power output.
NF C79-661*NF EN 61307:2011 Industrial microwave heating installations - Test methods for the determination of power output

British Standards Institution (BSI)

BS EN 60512-23-4:2001 Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23d. Transmission line reflections in the time domain
BS EN 1474-2:2020 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems - Design and testing of transfer hoses
BS ISO 16904-2:2024 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems - Design and testing of transfer hoses
BS EN 1474-2:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Design and testing of transfer hoses
BS ISO 2678:1985 Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment
BS EN IEC 62052-11:2021+A12:2024 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
BS EN IEC 62052-11:2021+A11:2022 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
BS EN ISO 1135-4:2010 Transfusion equipment for medical use - Transfusion sets for single use
BS EN 1474-2:2020(2023) Installation and equipment for liquefied natural gas — Design and testing of marine transfer systems Part 2 : Design and testing of transfer hoses
BS EN ISO 1135-4:2011 Transfusion equipment for medical use. Transfusion sets for single use
BS ISO 28620:2020 Medical devices. Non-electrically driven portable infusion devices
BS ISO 28620:2010 Medical devices - Non-electrically driven portable infusion devices
BS EN ISO 1135-4:2012 Transfusion equipment for medical use. Transfusion sets for single use
PD ISO/TS 23128:2019 Medical devices. Transfusion set and blood bag compatibility test method
23/30474665 DC BS ISO 16904-2. Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems - Part 2. Design and testing of transfer hoses
BS EN 61000-4-27:2000+A1:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
BS EN 60512-17-4:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
BS EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
BS EN 60512-17-1:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17a. Cable clamp robustness
BS EN 60835-3-11:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Service channel equipment for SCPC-PSK transmission
BS EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment. Tests and measurements - Endurance tests. Test 9e: Current loading, cyclic
BS EN 60512-25-1:2001 Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
BS EN IEC 60749-28:2022 Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) sensitivity testing. Charged device model (CDM). device level
BS EN IEC 60512-11-1:2019 Connectors for electrical and electronic equipment. Tests and measurements - Climatic tests. Test 11a. Climatic sequence
PD ISO/TR 15155-2:2012 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment. Test facility operating manual
BS EN 60512-17-3:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
BS EN 60974-4:2011 Arc welding equipment. Periodic inspection and testing
19/30391282 DC BS EN 50699. Recurrent Test of Electrical Equipment
BS ISO 15727:2020 UV-C devices. Measurement of the output of a UV-C lamp

ETSI - European Telecommunications Standards Institute

ETSI EN 300 019-2-2:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-2: Specification of Environmental Tests; Transportation (V2.1.2)
ETSI EN 300 019-2-2:2011 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation (V2.2.1)
PRETS 300 019-2-2-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests T 2.1 to T 2.3 Transportation
PRETS 300 132-1990 Equipment Engineering Power Supply Interface at the Input to Telecommunications Equipment (DE/EE-2001)
PRETS 300 019-2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation
ETR 151-1995 Equipment Engineering (EE); Electro-Magnetic Compatibility (EMC) Testing of Telecommunication Equipment Above 1 GHz
ETS 300 019- 2-2-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-2: Specification of Environmental Tests Transportation

HU-MSZT

MNOSZ 18406-1955 Shapes of generators, connecting equipment and conveying equipment. Preliminary technical inspection of power equipment information
MSZ 11018-1988 Electric equipment support capability testing. Test result output
MSZ 2100/2-1972 Electrical and mechanical equipment testing
MSZ 18159/2-1975 Connect rail transportation equipment. Railway transportation equipment launch detection
MSZ 17135-1983 Remote measurement equipment. Electrical energy consumption and power delivery measurements
MSZ 10559-1.lap-1960 Transportation Equipment. Technical product testing
MSZ 10559-7.lap-1960 Transportation Equipment. Double box, double tube sand conveying equipment
MSZ 151/7-1973 Strong current transmission allowed. Current carrying connections and alternating current equipment
MNOSZ 5945-1956 Excavation equipment. Inspection of tubular conveying pipes and connecting equipment
MSZ 18326-1981 Inspection of mechanical transportation equipment and trailer lighting equipment
MSZ 11425/1-1982 Testing requirements for industrial gas delivery equipment
MSZ 10559-6.lap-1960 Transportation Equipment. Double sided transport

International Electrotechnical Commission (IEC)

IEC 61308:1994 High-frequency dielectric heating installations - Test methods for the determination of power output
IEC 61308:2005 High-frequency dielectric heating installations - Test methods for the determination of power output
IEC TR 60736:1982 Testing equipment for electrical energy meters
IEC TR 63100:2017 Transmitting equipment for radiocommunication - Radio-over-fibre technologies for spectrum measurement - 100-GHz spectrum measurement equipment
IEC 61307:1994 Industrial microwave heating installations - Test methods for the determination of power output
IEC 61307:2011 Industrial microwave heating installations - Test methods for the determination of power output
IEC 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

GSO

OS GSO IEC 60736:2007 Testing Equipment for Electrical Energy Meters
GSO IEC 60645-5:2014 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
GSO 723:1997 Methods of test for telephone sets.
GSO IEC 60512-23-4:2015 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
GSO IEC 62052-11:2007 Electricity Metering Equipment (AC) - General Requirements Tests and Test Conditions Part II: Metering Equipment
GSO IEC 60512-23-7:2015 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
BH GSO IEC 60512-23-4:2016 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
GSO ISO 2827:2015 Photography -- Electronic flash equipment -- Determination of light output and performance
GSO ISO 28620:2013 Medical devices - Non-electrically driven portable infusion devices
BH GSO ISO 2827:2016 Photography -- Electronic flash equipment -- Determination of light output and performance
OS GSO IEC 60512-23-7:2015 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
GSO IEC 60580:2014 Medical electrical equipment - Dose area product meters
GSO IEC 61557-14:2021 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
BH GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
BH GSO IEC 61557-14:2022 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
OS GSO IEC/TR 62354:2014 General testing procedures for medical electrical equipment
GSO IEC 61301:2015 Nuclear instrumentation - Digital bus for NIM instruments
BH GSO IEC/TR 62354:2016 General testing procedures for medical electrical equipment
OS GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

CENELEC - European Committee for Electrotechnical Standardization

EN 61308:1996 High-Frequency Dielectric Heating Installations Test Methods for the Determination of Power Output
PREN 50699-2019 Recurrent Test of Electrical Equipment
EN 61954:1999 Power Electronics for Electrical Transmission and Distribution Systems Testing of Thyristor Valves for Static VAR Compensators
EN 50191:2000 Erection and Operation of Electrical Test Equipment

YU-JUS

JUS N.N6.135-1980 Radiocommunications. Receiving eguipment. Subjective tests on receivers for broadcast transmissions
JUS N.R4.446-1978 Electromechanical components for electronic equipment.Test 13c:Operating force
JUS N.N6.262-1982 Radiocommunications. Equipment used in mobile services. Signal Iing equipments. Seloctive-calling eguipments. Methods of measurement. Encoder outputcharacteristics
JUS N.R4.430-1978 Ekctromechanical components for electronic equipment. Test methods. Test 10a: Electrical overload (svritches)
JUS N.R4.447-1978 Electromechanical components for electronic equipment. Test 13d: operating torque

United States Navy

NAVY MIL-STD-419 E-2010 CLEANING, PROTECTING, AND TESTING PIPING, TUBING, AND FITTINGS FOR HYDRAULIC POWER TRANSMISSION EQUIPMENT
NAVY MIL-T-21200 L-1973 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-21200 L VALID NOTICE 2-1993 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-21200 L NOTICE 1-1977 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-21200 L (1)-1999 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-24015 B-1970 TRANSMITTING SET, TELEMETRY DATA AN/AKT-21
NAVY MIL-T-24015 B NOTICE 1-1997 TRANSMITTING SET, TELEMETRY DATA AN/AKT-21
NAVY MIL-PRF-28800 F-1996 TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-E-28968-1971 ELECTRONIC SHOP, TRANSPORTABLE: EXPANDABLE, EQUIPMENT REPAIR FACILITY
NAVY MIL-E-28932 A-1972 ELECTRONIC SHOP, TRANSPORTABLE: EXPANDABLE, TEST INSTRUMENT FACILITY

AENOR

UNE 21378:1986 TESTING EQUIPMENT FOR ELECTRICAL ENERGY METERS.
UNE-EN 1474-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
UNE-EN 60512-23-4:2002 Connectors for electronic equipment - Test and measurement -- Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain.
UNE-EN 62052-11:2004 Electricity metering equipment (AC) - General requirements, tests and test conditions -- Part 11: Metering equipment
UNE-EN 61000-4-27:2002 Electromagnetic compatibility (EMC) -- Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current no exceeding 16 A per phase.
UNE-EN 50191:2011 Erection and operation of electrical test equipment

SE-SIS

SIS SS 406 01 73-1987 Testing equipment for electrical energy meters
SIS SS IEC 398:1989 Industrial electro-heating equipment — General test conditions for electro-heating appliances
SIS SS 84 53 21-1982 Infusion equipment — Light weight infusion bottles

Lithuanian Standards Office

LST ETS 300 019-2-2 Leid.1-2005 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
LST EN 300 019-2-2 V2.1.2-2000 Equipment Engineering (EE). Environmental conditions and environmental tests for telecommunications equipment. Part 2-2: Specification of environmental tests. Transportation
LST EN 1474-1-2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
LST EN 50699-2021 Recurrent Tests of Electrical Equipment
LST EN 62353-2015 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2014)
LST EN 1474-2-2020 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
LST EN 1474-2-2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
LST EN 62353-2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2007)
LST EN 60512-23-4-2002 Connectors for electronic equipment. Tests and measurements. Part 23-4: Screening and filtering tests. Test 23d: Transmission line reflections in the time domain (IEC 60512-23-4:2001)
LST EN 50191-2011 Erection and operation of electrical test equipment

Danish Standards Foundation

DS/ETS 300019-2-2 V2.1.2:2003 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation
DS/EN 1474-1:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
DS/EN 50699:2020 Recurrent Tests of Electrical Equipment
DS/EN 1474-2:2009 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
DS/ISO 28620:2010 Medical devices - Non-electrically driven portable infusion devices
DS/EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DS/ETS 300019-2-2:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2:Specification of environmental tests - Transportation
DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
DS/EN 61000-4-14/A2:2009 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 62052-11:2003 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
DS/EN 60512-23-4:2001 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections of connectors in the time domain
DS/EN 61000-4-27/A1:2009 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 50191:2011 Erection and operation of electrical test equipment

RU-GOST R

GOST R 51317.3.2-2006 Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <=16 A per phase). Limits and test methods
GOST R IEC 62353-2013 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
GOST R 51317.3.2-1999 Electomagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current < 16 A per phase). Limits and test methods
GOST 24838-1987 Domestic radioelectronic equipment. Input and output parameters
GOST R 53390-2009 Electromagnetic compatibility of technical equipment. Low-voltage power supplies, d.c. output. Requirements and test methods
GOST 27209.0-1989 Electrical thermal equipment. General test methods
GOST R 51837-2001 Electrical thermal equipment. General test methods
GOST 30804.3.2-2013 Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
GOST R 51527-1999 Electromagnetic compatibility of technical equipment. Stabilized power supplies, d.c.output. Conducted electromagnetic interference. Limits and test methods
GOST IEC 62053-31-2012 Electricity metering equipment (a.c.). Particular requirements. Part 31. Pulse output devices for electromechanical and electronic meters (two wires only)
GOST R 51319-1999 Electromagnetic compatibility of technical equipment. Radio disturbance measuring apparatus. Technical requirements and test methods

RO-ASRO

STAS 11053/14-1985 Testing devices for electrical purposes IMPACT TEST APPARATUS
STAS 11053/8-1978 Testing devices for electrical purposesBALL PRESSURE APPARATUS
STAS 11053/5-1978 Testing devices for electrical purposesSPLASH APPARATUS
STAS 6048/8-1971 Radio disturbanee HIGH-VOLTAGE OVERHEAD TRANSMISSION LINKES AND ASSOClATED EQlUMENT Special methods of test
STAS 11053/4-1978 Testing devices for electrical purposes SPRAY APPARATUS
STAS 11053/9-1978 Testing devices for electrical purposes HOT MANDREL APPARATUS
STAS 11053/13-1985 Testing devices for electrical purposes Pressure apparatus
STAS 11381/35-1981 Graphical symbols for electrical diagrams EQUIPEMENT FOR TELEGRAPH TRANSMISSION

International Organization for Standardization (ISO)

ISO 2827:1973 Photography — Determination of the light output of electronic flash equipment
ISO 28620:2010 Medical devices - Non-electrically driven portable infusion devices
ISO/DIS 16904-2:1973 Installation and equipment for liquefied natural gas — Design and testing of marine transfer systems — Part 2: Design and testing of transfer hoses
ISO 15727:2020 UV-C devices — Measurement of the output of a UV-C lamp

Military Standards (MIL-STD)

DOD A-A-51542-1986 TEST SET, ELECTRONIC CIRCUIT-COMPONENT

European Committee for Standardization (CEN)

EN 1474-3:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems
EN 1474-2:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
EN 13272:2001 Railway Applications - Electrical Lighting for Rolling Stock in Public Transport Systems

FI-SFS

SFS 3542-1980 Air conditioning equipment delivery pipe. Stability test and impermeability test

ES-UNE

UNE-EN 50699:2020 Recurrent Tests of Electrical Equipment (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN 1474-2:2021/AC:2023 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
UNE-EN 1474-2:2021 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)
IEEE 2960-2023 IEEE Guide for Testing Equipment for Direct Current Electrical Energy Meters
UNE-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (Endorsed...

PL-PKN

PN-EN 50699-2021-07 E Recurrent Test of Electrical Equipment
PN N84520-1993 Photography. Electronic flash equipment. Determination of light output and performance
PN T06500-04-1985 Electronic measuring equipments Specifying parameters Tests
PN Z55203-1991 Medical equipment. Infusion sets for single use. Requirements and test methods
PN T06255-05-1988 Electronic e?Uipment for homeuse Radio receiver e?uipment Reliabilety testing in produce
PN T06500-06-1989 Electronic measuring e?uipment Climatic re?uirements and tests

European Committee for Electrotechnical Standardization（CENELEC）

EN 50699:2020 Recurrent Test of Electrical Equipment
EN 61308:2006 High-Frequency Dielectric Heating Installations Test Methods for the Determination of Power Output
FprEN IEC 61557-14:2023 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
EN 60512-25-4:2001 Connectors for Electronic Equipment - Tests and Measurements Part 25-4: Test 25d - Propagation Delay
EN 50191:2010 Erection and operation of electrical test equipment

DIN

DIN EN 1474-2:2024 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses; German version EN 1474-2:2020 + AC:2023
DIN EN 50191:2001 Erection and operation of electrical test equipment; German version EN 50191:1999

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P1613.1/D48, Oct 2013 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE Std 1613.1-2013 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE 1613.1-2013 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE P1613.1/D47, August 2013 IEEE Draft Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE 743-1995 Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for Telecommunications

IT-UNI

UNI EN 1474-2-2020 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses

CH-SNV

SN EN 1474-2-2021 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses

Aeronautical Radio Inc.

ARINC 600-13 BOOK-2001 Air Transport Avionics Equipment Interfaces
ARINC 436-2005 GUIDELINES FOR ELECTRONIC QUALIFICATION TEST GUIDE
ARINC 738-3 ITEM 9.0-2001 Built-In Test Equipment (Bite)
ARINC 608A-1993 Design Guidance for Avionics Test Equipment Part 1 System Description
ARINC 704A ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 725-2 ITEM 6.0-1984 Provisions for Automatic Test Equipment
ARINC 753-3 ITEM 8.0-2001 Provisions for Automatic Test Equipment
ARINC 707-6 ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 706-4 ITEM 6.0-1988 Provisions for Automatic Test Equipment
ARINC 703-2 ITEM 6.0 Provisions for Automatic Test Equipment
ARINC 718-4 ITEM 5.0 Provisions for Automatic Test Equipment
ARINC 719-5 ITEM 5.0 Automatic Test Equipment Provisions
ARINC 729-1 ITEM 5.0-1981 Provisions for Automatic Test Equipment

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T O.150-1992 Digital Test Patterns for Performance Measurements on Digital Transmission Equipment - Specifications of Measuring Equipment (Study Group IV; 8 pp)
ITU-T P.501-2000 Test Signals for Use in Telephonometry - Series P: Telephone Transmission Quality@ Local Line Networks Objective Measuring Apparatus
ITU-T P.34 SPANISH-1993 TRANSMISSION CHARACTERISTICS OF HANDS-FREE TELEPHONES
ITU-T P.62-1989 Measurements on Subscribers' Telephone Equipment - Telephone Transmission Quality (Study Group XII) 2 pp

GOSTR

GOST R 58247-2018 Air Transport Avionics Equipment Interfaces

GOST

GOST R 70436-2022 Medical devices. Transfusion set and blood bag compatibility test method

Indonesia Standards

SNI ISO 28620:2011 Medical devices - Non-electrically driven portable infusion devices
SNI IEC 62052-11:2011 “Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment”
SNI 16-4774.3-2002 Transfusion equipment for medical use - Part 3: Transfusion sets for single use

KR-KS

KS A ISO 2827-2003(2023) Photography-Electronic flash equipment-Determination of light output and performance

Underwriters Laboratories (UL)

UL 1244-2000 Electrical and electronic measuring and testing equipment
UL 1244 BULLETIN-2000 UL Standard for Safety Electrical and Electronic Measuring and Testing Equipment

National Electrical Manufacturers Association（NEMA)

NEMA HP 100-1991 High Temperature Instrumentation and Control Cables

Society of Automotive Engineers (SAE)

SAE ARINC608A-1993 DESIGN GUIDANCE FOR AVIONICS TEST EQUIPMENT
SAE ARINC600-20-2017 AIR TRANSPORT AVIONICS EQUIPMENT INTERFACES
SAE AIR64C-2021 Electrical and Electronic Equipment Cooling in Commercial Transports
SAE AIR64B-2010 Electrical and Electronic Equipment Cooling in Commercial Transports

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ/DKD 2622 Blatt 9.1-2007 Calibration for measuring equipment for electrical quantities - Testing equipment for checking the safety of electrical devices - Electrical devices according to DIN VDE 0701 and DIN VDE 0702
VDI/VDE/DGQ/DKD 2622 BLATT 9.3-2019 Calibration of measuring equipment for electrical quantities - Test equipment for the determination of the electrical safety - Electrical equipment according to DIN VDE 0100 and DIN VDE 0105
VDI/VDE/DGQ 2618 BLATT 11.4-2016 Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauge
VDI/VDE/DGQ/DKD 2622 Blatt 9.1-2008 Calibration for measuring equipment for electrical quantities - Testing equipment for checking the safety of electrical devices - Electrical devices according to DIN VDE 0701 and DIN VDE 0702

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R BT.1204-1995 Measuring Methods for Digital Video Equipment with Analogue Input/Output

GB-REG

REG 7 CFR PART 3300-2012 AGREEMENT ON THE INTERNATIONAL CARRIAGE OF PERISHABLE FOODSTUFFS AND ON THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT

IN-BIS

IS 12346-1988 Specification for AC energy meter test equipment
IS 9021-1978 General test conditions for industrial electric heating equipment

SAE - SAE International

SAE AS1142-1971 HERMETICITY TESTING OF MICROELECTRONIC DEVICES
SAE AIR64B-1992 Electrical and Electronic Equipment Cooling in Commercial Transports

Standard Association of Australia （SAA）

AS 4362.2:1996 High-voltage test techniques for low-voltage equipment - Test equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE REFRIGERATION IP CH 8-2010 EQUIPMENT AND SYSTEM DEHYDRATING@ CHARGING@ AND TESTING
ASHRAE REFRIGERATION SI CH 8-2010 EQUIPMENT AND SYSTEM DEHYDRATING@ CHARGING@ AND TESTING

TR-TSE

TS 2155-1975 BASIC ENVIRONMENTAL TESTING PROCEDURE FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Ea : SHOCK

IEC - International Electrotechnical Commission

IEC 60512-22-1:2010 Connecteurs pour équipements électroniques – Essais et mesures – Partie 22-1: Essais de capacité – Essai 22a: Capacité (Edition 1.0)

ZA-SANS

SANS 61000-4-14:2009 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

Association of German Mechanical Engineers

VDI/VDE/DGQ/DKD 2622 Blatt 12-2004 Calibration of measurement equipment for electrical quantities - Test receiver

ECIA - Electronic Components Industry Association

407-A-1978 Testing Procedures for Relays for Electrical and Electronic Equipment

(U.S.) Telecommunications Industries Association

TIA-912-A-2004 Telecommunication ?IP Telephony Equipment ?Voice Gateway Transmission Requirements (Contains Color)
TIA-912-C-2015 Telecommunications IP Telephony Equipment Voice Gateway Transmission Requirements

US-USDA

USDA 7 CFR PART 3300-2011 AGREEMENT ON THE INTERNATIONAL CARRIAGE OF PERISHABLE FOODSTUFFS AND ON THE SPECIAL EQUIPMENT TO BE USED FOR SUCH CARRIAGE (ATP); INSPECTION, TESTING, AND CERTIFICATION OF SPECIAL EQUIPMENT

American National Standards Institute （ANSI)

ANSI/TIA-912-C-2015 Telecommunications IP Telephony Equipment Voice Gateway Transmission Requirements

U.S. Air Force

AIR FORCE A-A-59283 A VALID NOTICE 1-2012 Test Set, Transmission Line

TIA - Telecommunications Industry Association

TIA-912-2002 Telecommunications IP Telephony Equipment Voice Gateway Transmission Requirements