plastic jar

plastic jar, Total:284 items.

The international standard classification for "plastic jar" includes: Stationary containers and tanks , Thermoplastic materials , Barrels. Drums. Canisters , Moulding equipment , Irrigation and drainage equipment , Plastics in general , Drainage systems .

The Chinese standard classification for "plastic jar" includes: Pressure vessel , Packaging material and container , Basic standards and general methods for synthetic resin and plastic , Farming machinery and tools , Canned vegetable , Oil and gas gathering and transportation equipment , Outdoor water supply and draining engineering .

---

Group Standards of the People's Republic of China

• T/ZZB 0855-2018 Hydraulic brake system plastic reservoir assembly
• T/XJSL 0002-2018 Disposable plastic yogurt cup(bottles;boxes;cans)
• T/XJSL 0002-2024 Disposable plastic yogurt cup(bottles;boxes;cans)
• T/SXXC 016-2022 Shaxian snack stew pot
• T/FSAS 11-2017 Plastic injection mold for small household appliances
• T/DLQG 1002-2017 Canned logistics plastic box
• T/SNHFA 016-2023 Small jar of substitute tea

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB 19160-2008 Packing containers - Plastic jerrican for packages of dangerous goods
• GB/T 25197-2010 Welded static non-pressurized thermoplastic tanks
• GB/T 2407-2008 Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
• GB/T 12556.1-1990 Injection mould for plastic Medium size and small size mould bases
• GB 19160-2003 Packing containers―Plastic jerrican for packages of dangerous goods
• GB/T 18689-2002 Agricultural irrigation equipment--Manually operated small plastics valves
• GB 19160-2008 Packing containers - Plastic jerrican for packages of dangerous goods
• GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
• GB/T 17037.3-2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
• GB19160-2008 Packing containers-Plastic jerrican for packages of dangerous goods

Professional Standard - Building Materials

• JC/T 2286-2014 Steel-glass fiber reinforced plastic double layers buried oil tank
• JC/T 587-1995 Filament wound reinforced plastics tanks
• JC/T 2368-2016 Glass fiber reinforced plastics purification tank

Taiwan Provincial Standard of the People's Republic of China

• CNS 10705-1983 Plastic Bumpers for Passenger Cars
• CNS 10706-1983 Method of Test for the Plastic Bumpers of Passenger Cars
• CNS 14131-1998 Plastic fuel tanks for passenger cars

Professional Standard - Light Industry

• QB/T 5605-2021 High barrier lidding film of multilayer plastic container for canned food
• QB 1406-1991 Canned Slender Bamboo Shoots
• QB/T 1406-1991 Canned slender bamboo shoots

Professional Standard - Petroleum

• SY/T 0603-2005 Specification for fiberglass reinforced plastic tanks
• SY/T 0603-2019 Technical specification for fiberglass reinforced plastic tanks

Professional Standard - Chemical Industry

• HG/T 4112-2009 Plastic lining storage tand and pot type vessel engineering factor

未注明发布机构

• DVS 2205-2 BBL06:2010-01 Calculation of shell structures for thermoplastic tanks and devices
• DVS 2205-2 1997 Calculation of Thermoplastic Calculation of thermoplastic tanks and apparatus — Vertical cylindrical non-pressurised tanks

Professional Standard - Urban Construction

• CJ/T 233-2006 Plastics inspection chambers for sewerage in building area
• CJ/T 233-2016 Plastic inspection chamber for sewerage in building area

Shaanxi Provincial Standard of the People's Republic of China

• DB6107/T 46-2023 Production process specifications for Hanzhong special snacks Lueyang Can Can Tea

Gansu Provincial Standard of the People's Republic of China

• DB62/T 2262-2012 Technical regulations for yam cultivation in plastic small sheds

Heilongjiang Provincial Standard of the People's Republic of China

• DB2301/T 125-2022 Technical Regulations for Pepper Cultivation in Plastic Greenhouses

Association of German Mechanical Engineers

• DVS 2205-5-1987 Calculation of thermoplastic tanks and apparatus - Rectangular tanks
• DVS 2205-2-2000 Calculation of thermoplastic tanks and apparatus - Vertical cylindrical non-pressurised tanks
• DVS 2205-2-1997 Calculation of thermoplastic tanks and apparatus - Vertical cylindrical non-pressurised tanks
• DVS 2205-2-2008 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks"
• DVS 2205-2-2011 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks"
• DVS 2205-2 Beiblatt 4-2013 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Flat-bottomed tanks in earthquake regions
• DVS 2205-2 Beiblatt 2-1998 Calculation of thermoplastic tanks and apparatus - Vertical cylindrical non-pressurised tanks - Collecting devices
• DVS 2205-2-2003 Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks
• DVS 2205-2-2010 Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks
• DVS 2205-2-2015 Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks
• DVS 2205-2-2002 Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks
• DVS 2205-2-2014 Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks
• DVS 2205-4-1988 Calculation of thermoplastic tanks and apparatuses - Flanged joints
• DVS 2205-2 Beiblatt 3-2003 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Flat roofs"
• DVS 2205-2 Beiblatt 2-2008 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Collecting devices"
• DVS 2205-2 Beiblatt 2-2011 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Collecting devices
• DVS 2205-2 Beiblatt 3-2010 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Flat roofs"
• DVS 2205-2 Beiblatt 4-2015 Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tanks Flat-bottomed tanks in seismic zones
• DVS 2205-2 Beiblatt 2-2003 Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tank collection devices
• DVS 2205-2 Beiblatt 4-2012 Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tanks Flat-bottomed tanks in seismic zones
• DVS 2205-2 Beiblatt 4-2014 Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tanks Flat-bottomed tanks in seismic zones
• DVS 2205-2 Beiblatt 5-2013 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Vertical-skirt tanks in earthquake regions
• DVS 2205-2 Beiblatt 2-2010 Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tank collection devices
• DVS 2205-2 Beiblatt 2-2015 Calculation of tanks and equipment made of thermoplastic plastics Standing round non-pressurized tank collection equipment
• DVS 2205-2 Beiblatt 1-1997 Welded static thermoplastic tanks - Installation inside of buildings
• DVS 2205-2 Beiblatt 5-2014 Calculation of storage tanks and equipment made of thermoplastics Vertical round non-pressurized storage tanks Vertical frame storage tanks in seismic zones
• DVS 2205-2 Beiblatt 2-2014 Calculation of tanks and equipment made of thermoplastic plastics Standing round non-pressurized tank collection equipment
• DVS 2205-2 Beiblatt 2-2002 Calculation of tanks and equipment made of thermoplastic plastics Standing round non-pressurized tank collection equipment
• DVS 2205-2 Beiblatt 5-2015 Calculation of storage tanks and equipment made of thermoplastics Vertical round non-pressurized storage tanks Vertical frame storage tanks in seismic zones
• DVS 2205-2 Beiblatt 5-2012 Calculation of storage tanks and equipment made of thermoplastics Vertical round non-pressurized storage tanks Vertical frame storage tanks in seismic zones
• DVS 2205-2 Beiblatt 3-2002 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical round non-pressurized storage tanks with flat roofs
• DVS 2205-2 Beiblatt 7-2014 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical circular atmospheric storage tanks with truncated ring cone bottoms
• DVS 2205-2 Beiblatt 3-2015 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical round non-pressurized storage tanks with flat roofs
• DVS 2205-2 Beiblatt 7-2009 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical circular atmospheric storage tanks with truncated ring cone bottoms
• DVS 2205-2 Beiblatt 3-2014 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical round non-pressurized storage tanks with flat roofs
• DVS 2205-1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
• DVS 2205-2 Beiblatt 7-2015 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical circular atmospheric storage tanks with truncated ring cone bottoms
• DVS 2205-2 Beiblatt 7-2010 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical circular atmospheric storage tanks with truncated ring cone bottoms
• DVS 2205-2 Beiblatt 6-2008 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Shell construction method"
• DVS 2205-1-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
• DVS 2205-2 Beiblatt 6-2010 Calculation of vertical circular non-pressurized tank shell structures for tanks and equipment made of thermoplastics
• DVS 2205-2 Beiblatt 6-2015 Calculation of vertical circular non-pressurized tank shell structures for tanks and equipment made of thermoplastics
• DVS 2205-1 Beiblatt 6-2011 Calculation of tanks and apparatus made of thermoplastics - Welding factors
• DVS 2205-2 Beiblatt 6-2014 Calculation of vertical circular non-pressurized tank shell structures for tanks and equipment made of thermoplastics
• DVS 2205-2 Beiblatt 6-2011 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Shell construction method"
• DVS 2205-1 Beiblatt 6-2013 Calculation of tanks and apparatus made of thermoplastics - Welding factors
• DVS 2205-1 Beiblatt 17-2006 Calculation of tanks and apparatus made of thermoplastics - Welding factors
• DVS 2205-2 Beiblatt 1-2003 Calculation of tanks and apparatus made of thermoplastics - Welded stationary tanks in the case of installation in buildings
• DVS 2205-2 Beiblatt 7-2012 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Ring-supported conical bottom
• DVS 2205-2 Beiblatt 9-2015 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical, round, parallel-supported inclined bottoms of atmospheric storage tanks
• DVS 2205-2 Beiblatt 9-2010 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical, round, parallel-supported inclined bottoms of atmospheric storage tanks
• DVS 2205-2 Beiblatt 1-2000 Welded fixed tanks made of thermoplastic for indoor installation
• DVS 2205-2 Beiblatt 1-1996 Welded fixed tanks made of thermoplastic for indoor installation
• DVS 2205-1 Beiblatt 7-2013 Calculation of tanks and apparatus made of thermoplastics - Application examples
• DVS 2205-2 Beiblatt 9-2014 Calculation of storage tanks and equipment made of thermoplastic plastics Vertical, round, parallel-supported inclined bottoms of atmospheric storage tanks
• DVS 2205-1 Beiblatt 2-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
• DVS 2205-1 Beiblatt 2-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
• DVS 2205-2 Beiblatt 9-2011 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Parallel-supported sloping base"
• DVS 2205-2 Beiblatt 8-2010 Calculation of tanks and equipment made of thermoplastics Vertical circular non-pressurized tank ring support cone bottom example
• DVS 2205-2 Beiblatt 1-2002 Welded fixed tanks made of thermoplastic for indoor installation
• DVS 2205-2 Beiblatt 8-2012 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Example of a ring-supported conical bottom
• DVS 2205-2 Beiblatt 9-2012 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Parallel-supported sloping base"
• DVS 2205-2 Beiblatt 8-2009 Calculation of tanks and equipment made of thermoplastics Vertical circular non-pressurized tank ring support cone bottom example
• DVS 2205-2 Beiblatt 8-2011 Calculation of tanks and equipment made of thermoplastics Vertical circular non-pressurized tank ring support cone bottom example
• DVS 2205-1 Beiblatt 20-2007 Calculation of tanks and apparatus made of thermoplastics - PVDF media list
• DVS 2205-2 Beiblatt 8-2015 Calculation of tanks and equipment made of thermoplastics Vertical circular non-pressurized tank ring support cone bottom example
• DVS 2205-1 Beiblatt 3-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
• DVS 2205-1 Beiblatt 10-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PP
• DVS 2205-2 Beiblatt 8-2014 Calculation of tanks and equipment made of thermoplastics Vertical circular non-pressurized tank ring support cone bottom example
• DVS 2205-1 Beiblatt 1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
• DVS 2205-1 Beiblatt 3-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
• DVS 2205-1 Beiblatt 14-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PVC-U
• DVS 2205-1 Beiblatt 9-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PVC-C
• DVS 2231-2008 "Above-ground tanks, apparatus and piping made of thermoplastics - Guide to quality assurance"
• DVS 2205-1 Beiblatt 4-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
• DVS 2205-1 Beiblatt 4-2012 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
• DVS 2205-2 Beiblatt 10-2012 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Example of a parallel-supported sloping base
• DVS 2205-4 Beiblatt-1996 "Calculation of thermoplastic tanks and apparatuses - Welded flanges, welded collars - Constructive details"
• DVS 2205-1 Beiblatt 4-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group

Korean Agency for Technology and Standards (KATS)

• KS I 3242-2016 Recycled plastics cushion tank
• KS I 3242-2014 Recycled plastics cushion tank

GM Daewoo

• GMKOREA EDS-T-7530-2011 Test Method of Plastic Tank
• GMKOREA EDS-T-7526-2010 Temperature resistance test method for plastic brake fluid reservoirs

American National Standards Institute （ANSI)

• ANSI/IAPMO Z124.4-2006 Plastic Water Closet Bowls and Tanks
• ANSI/AWWA D120-2009 Thermosetting Fiberglass-Reinforced Plastic Tanks
• ANSI/IAPMO Z124.9-2004 Plastic Urinal Fixtures
• ANSI Z124.9-2004 American National Standard for Plastic Urinal Fixtures
• ANSI/ASTM D4508:1998 Test Methods for Chip Impact Strength of Plastics (08.03)

United States Navy

• NAVY MIL-P-8045 B (4)-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
• NAVY MIL-P-8045 B-1964 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
• NAVY MIL-P-8045 B NOTICE 1-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

Association Francaise de Normalisation

• NF M88-300:1981 Road tankers in reinforced plastic. Definition of materials suitable for the construction of vessel walls.
• NF M88-550:1979 Storage tanks in reinforced plastic. Underground tanks for liquid petroleum products.
• NF M88-514:1980 Mixed tanks for underground storage of liquid petroleum products (2nd category) - Metal outer tank - Plastic inner tank
• NF M88-560:1986 Storage tanks. Plastics tanks for above ground storage of domestic fuel oil. Design. Inspection.
• M88-301:1982 Reinforced plastics road tankers. Design and calculation.
• NF T51-294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2 : small tensile bars.
• NF T51-294-2:1998 Plastics. Injection moulding of test specimens of thermoplastic materials. Part 2 : small tensile bars.
• NF M88-302:1976 Road tankers in reinforced plastic. Symbols used for design.
• NF T51-294-3:1998 PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 3 : SMALL PLATES. (EUROPEAN STANDARD EN ISO 294-3).
• NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
• NF T51-294-3:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates.
• NF M88-310:1976 Road tankers of reinforced plastic materials. Models for technical data sheets.
• NF M88-551:1988 STORAGE TANKS. GLASS FIBRE REINFORCED PLASTIC STORAGE TANKS. UNDERGROUND TANKS FOR DOMESTIC FUER,GAS OIL,KEROSENE.
• NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
• NF EN 12573-2:2000 Cuves statiques soudées en matières thermoplastiques sans pression - Partie 2 : calcul des cuves cylindriques verticales
• NF EN ISO 294-3:2020 Plastics - Injection molding of test pieces of thermoplastic materials - Part 3: small plates

British Standards Institution (BSI)

• BS 4806:1972 Specification for rigid plastics pots for dairy products
• BS 4994:1973 Specification for vessels and tanks in reinforced plastics
• BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
• BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
• BS EN ISO 294-3:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Small plates
• BS EN ISO 294-2:1997 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
• BS EN ISO 294-2:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Small tensile bars
• BS EN ISO 294-2:2018 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
• BS 4994:1987(2000) Specification for Design and construction of vessels and tanks in reinforced plastics
• BS PAS 36-2:2000 Goals for small-sided football-Specification for plastics goals
• BS EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Requirements and test methods for single wall tanks

RO-ASRO

• STAS 11962-1985 Plastic packings TANKS "WITH CIRCULAR SECTION Dimensions
• STAS SR ISO 1210:1993 Plastics. Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame

Military Standards (MIL-STD)

• MIL MIL-J-36511-1966 JAR, PIPET, PLASTIC (S/S BY A-A-53701)
• MIL MIL-DTL-43613E-2009 Can, Water, Military: Plastic, 5-Gallon Capacity
• MIL MIL-C-43522A-1973 CAN, RADIATOR FILLING AND CAN SPRINKLING; PLASTIC (S/S BY A-A-52125)
• MIL MIL-P-8045B-1964 Plastic, Self-Sealing and Non-Self-Sealing Tank Backing Material
• MIL MIL-C-43613D-1993 CAN, WATER, MILITARY: PLASTIC, 5-GALLON CAPACITY (SUPERSEDING MIL-C-43613C)
• DOD A-A-54366-1991 CANISTER ASSEMBLY, SUCTION, SURGICAL (ONE CANISTER WITH FIFTY LINERS)
• MIL MIL-PRF-32023-1998 ADAPTER KIT - GRAVITY FEED, FOR 5-GALLON MILITARY PLASTIC FUEL CAN
• MIL MIL-C-43613C-1986 CAN, WATER, MILITARY: PLASTIC, 5-GALLON CAPACITY (S/S BY MIL-C-43613D)

Swedish Institute for Standards

• SS 846310:1983 Spare cans - Petrol cans of polyethylene plastics- Volume 2 to 10 litres
• SS-EN ISO 294-2:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
• SS-EN ISO 21487:2023 Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2022)

Spanish Association for Standardization (UNE)

• AENOR UNE 53300:1975 Plastic materials. Determination of the tightness of tanks made of reinforced plastic materials.
• UNE-EN 12573-2:2001 WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 2: CALCULATION OF VERTICAL CYLINDRICAL TANKS.
• UNE-EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
• UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
• UNE-EN 12573-3:2001 WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 3: DESIGN AND CALCULATION FOR SINGLE SKIN RECTANGULAR TANKS.
• UNE 53991:2018 IN Plastics. Repairing and internal covering of metallic tanks, used for the storage of liquid fuel, with reinforced plastics.
• UNE 53990:2000 IN Plastics. Installation of glass reinforced plastics (GRP) tanks above ground for storaging of liquid petroleum based fuels.
• UNE 53991:2011 IN Plastics. Repairing and internal covering of metallic tanks, used for the storage of liquid fuel, with reinforced plastics
• UNE 53496-2:1993 EX PLASTICS. GLASS REINFORCED PLASTICS TANKS, IN THE AIR OR IN HOLD, FOR STORAGING FUEL-OIL. PART 2: SPECIFICATIONS FOR HORIZONTAL AND VERTICAL TANKS.
• UNE 53991:2004 IN PLASTICS. REPAIRING AND INTERNAL COVERING OF METALLIC TANKS, FOR STORAGING LIQUID FUEL, WITH REINFORCED PLASTICS.
• UNE-EN 12573-1:2001 Welded static non-pressurized thermoplastic tanks - Part 1: General principles.
• UNE 53993:2009 IN Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 oC.
• UNE-EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an

American Petroleum Institute (API)

• API SPEC 12P-1995 Specification for Fiberglass Reinforced Plastic Tanks
• API SPEC 12P-1986 SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS FIRST EDITION

Ente Nazionale Italiano di Unificazione

• UNI EN ISO 294-3:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
• UNI EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
• UNI EN ISO 294-2:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Small tensile bars
• UNI EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
• UNI EN ISO 294-3:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
• UNI EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
• UNI EN 12573-4:2001 Welded static non-pressurised thermoplastic tanks - Design and calculation of flanged joints

U.S. Military Regulations and Norms

• ARMY MIL-C-43613 D-1993 CAN, WATER, MILITARY: PLASTIC, 5-GALLON CAPACITY
• ARMY MIL-PRF-32023-1998 ADAPTER KIT - GRAVITY FEED, FOR 5-GALLON MILITARY PLASTIC FUEL CAN
• ARMY MIL-T-43036 B VALID NOTICE 1-1988 TAPE, PRESSURE-SENSITIVE ADHESIVE, PLASTIC FILM (FOR SEALING FIBER CONTAINERS AND CANS)

SE-SIS

• SIS SS 84 63 10-1983 Spare cans - Petrol cans of polyethylene plastic - Volume 2 to 10 litres
• SIS 84 63 10-1973 Petrol cans of ethene plastics. Volume 2 to 5 litres

International Association of Plumbing and Mechanical Officials

• IAPMO Z124.9-2004 Plastic Urinals Fixtures
• IAPMO IGC 262-2013 Corrugated Thermoplastic Tanks
• IAPMO IGC 262-2020 Corrugated Thermoplastic Tanks

Lithuanian Standards Office

• LST EN 12573-2-2000 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
• LST EN 12573-3-2000 Welded static non-pressurized thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks
• LST EN 13575-2012 Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods
• LST EN 12573-1-2000 Welded static non-pressurized thermoplastic tanks - Part 1: General principles
• LST EN 13341-2005+A1-2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an

SCC

• ADS AS6264-267 Filler Cap Small Plastic
• CAN 4-S615-M83-1983 Standard underground reinforced plastic tanks for petroleum products

ADS

• ADS AS3107-3110 Filler Cap - Small, Plastic

Danish Standards Foundation

• DS/EN 12573-2:2001 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
• DS/EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods
• DS/EN 12573-3:2001 Welded static non-pressurised thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks
• DS 2383:1997 Fusion of sheet, pipes and tanks in plastics - Certification of welders
• DS 2383:1991 Fusion of sheet, pipes and tanks in plastics. Appproval testing of welders
• DS/EN 12573-1:2001 Welded static non-pressurised thermoplastic tanks - Part 1: General principles
• DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
• DANSK DS/EN ISO 294-3:2020 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates (ISO 294-3:2020)
• DS/EN 13341+A1/ZA:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an
• DS/EN 13341+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an
• DANSK DS/ISO 294-3:2020 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates
• DANSK DS/EN ISO 294-2:2019 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:2018)
• DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
• DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.

American Water Works Association (AWWA)

• ANSI/AWWA D120-2019 Thermosetting Fiberglass- Reinforced Plastic Tanks
• AWWA D120-2019 Thermosetting Fiberglass-Reinforced Plastic Tanks

TH-TISI

• TIS 1371-1996 Canned young palmyra kernel
• TIS 1373-1996 Canned young palmyra kernel and jackfruit

The Directorate General of Specifications and Metrology (DGSM)

• OS GSO 2120:2011 Oil & Gas Small Tanks Specifications – Manufacture of Small Tanks

Defense Logistics Agency

• DLA MIL-DTL-43613 E-2009 CAN, WATER, MILITARY: PLASTIC, 5-GALLON CAPACITY

AIA/NAS - Aerospace Industries Association of America Inc.

• NAS3438-1971 Vial@ Plastic (Rev 1)
• NAS3438-2012 VIAL@ PLASTIC (Rev 2)

Aerospace Industries Association

• AIA NAS 3438-1971 Vial, Plastic (Rev. 1)

German Institute for Standardization

• DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
• DIN EN 12573-2:2000 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; German version EN 12573-2:2000
• DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
• DIN EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd.1:2004); English version of DIN EN ISO 294-2:2006-05
• DIN EN ISO 294-3 E:2018-11 Injection molding of specimens of plastic thermoplastic materials Part 3: Small plates (draft)
• DIN 53733 E:2014-04 Testing of plastics - Size reduction of plastic products for test purposes
• DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
• DIN 53733 E:2020-10 Testing of plastics - Size reduction of plastic products for test purposes
• DIN EN ISO 294-3:2003-12 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
• DIN 53733:1976-07 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
• DIN 53733:2020-10 Draft Document - Testing of plastics - Size reduction of plastic products for test purposes
• DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
• DIN EN ISO 294-3:2018-11 Draft Document - Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO/DIS 294-3:2018); German and English version prEN ISO 294-3:2018
• DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars
• DIN EN 976-3 E:1997-10 Underground tanks of glass-reinforced plastics (GRP) — Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels — Part 3: Requirements and test methods; for double wall tanks
• DIN 53733 E:2020 Draft Document - Testing of plastics - Size reduction of plastic products for test purposes

European Committee for Standardization (CEN)

• EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
• EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
• EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
• EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

Japanese Industrial Standards Committee (JISC)

• JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
• JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
• JIS K 7152-3:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates

International Organization for Standardization (ISO)

• ISO 1210:1982 Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
• ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
• ISO 294-2:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
• ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
• ISO 294-3:2002/Amd 1:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates; Amendment 1
• ISO 294-3:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
• ISO 294-2:1996/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars; Amendment 1

Society of Automotive Engineers (SAE)

• SAE AS6264-1 AS6264-6267 Filler Cap - Small Plastic
• SAE AS6264-1-1954 AS6264-6267 Filler Cap - Small Plastic
• SAE AS3107-2 AS3107-3110 Filler Cap - Small, Plastic
• SAE AS3107-2-1948 AS3107-3110 Filler Cap - Small, Plastic
• SAE AS5342-1 AS5342 Boundary Ring for Plastic Trough. 25 A.H.
• SAE J2053-1994 Brake Master Cylinder Plastic Reservoir Assembly for Road vehicles
• SAE AS5342-1-1951 AS5342 Boundary Ring for Plastic Trough. 25 A.H.

GCC Standardization Organization

• GSO 2120:2011 Oil & Gas Small Tanks Specifications – Manufacture of Small Tanks

FI-SFS

• SFS 2770 S-1979 Under ground plastic tank for storage of flammable liquids.Construction
• SFS 3064-1974 Metal packaging. Rectangular small jar
• SFS-ISO 181 E:1986 This standard is approved in English

CEN - European Committee for Standardization

• PREN 13341-2018 Static thermoplastic tanks for above ground storage of fuel - Product characteristics and test methods

Underwriter Laboratories of Canada (ULC)

• ULC-S615-1977 Reinforced Plastic Underground tanks for Petroleum Products
• ULC-S615-1998 Standard for Reinforced Plastic Underground Tanks for Flammable and CombustibleLiquids

PT-IPQ

• NP 2394-1984 plastic material. Measure the flammability of materials in tiny parts by applying a small fire

IN-BIS

• IS 7959-1976 Specification for polyethylene plastic tanks for foam compounds

US-FCR

• FCR UFGS-33 56 13.14-2006 FIBERGLASS-PLASTIC LINING FOR STEEL TANK BOTTOMS (FOR PETROLEUM)

Gosstandart of Russia

• GOST 34739.2-2021 Plastics. Preparation of test specimens from thermoplastics. Small size tensile test specimens
• GOST 12028-2014 Canned small herring fish in oil. Specifications
• GOST 280-1985 Canned fish. Sprats in oil. Specifications

Standards Norway

• NS-EN ISO 294-3:1998 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates (ISO 294-3:1996)
• NS-EN ISO 294-3:2003 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates (ISO 294-3:2002)

American Society for Testing and Materials (ASTM)

• ASTM STP 533-1973 Processing of plastics with minimal environmental impact
• ASTM D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

Standard Association of Australia （SAA）

• AS 1799.4:1985 Small pleasure boats code - Reinforced plastics construction

Indonesia Standards

• SNI 12-2577-1992 Polyolefin plastic jerrican for drinking water of 20 litres net capacity

Others: Plastic jar size,food plastic jar,small plastic,small pot of tea,Plastic Jar Accessories,Plastic Jar Accessories,household small can,Small can 5.6,plastic jar