High polymer content

High polymer content, Total:399 items.

The international standard classification for "High polymer content" includes: Photographic paper, films and cartridges , Thermoplastic materials , Plastics in general , Biology. Botany. Zoology , Raw materials for rubber and plastics , Farming and forestry , Surface active agents , Aromatic hydrocarbons , Man-made fibres , General methods of tests and analysis for food products , Inorganic chemicals in general , Thermosetting materials , Cereals, pulses and derived products , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "High polymer content" includes: Basic standards and general methods for photosensitive material , Synthetic resin and plastic , Basic standards and general methods for synthetic resin and plastic , Environmental Condition and General Test Method , Basic standards and general methods for surface active agent , Basic organic chemicals , Chemical fibre in general , Basic standards and general methods , Inorganic chemicals in general , Synthetic food additives , Orthopedic devices .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38479-2021 Determination of chitosan content―High performance liquid chromatography
GB/T 43085-2023 Plastics—Polymer dispersions—Determination of the content of free formaldehyde
GB/T 6509-2025 Determination of caprolactam and oligomers content in polycaprolactam (PA6) chip and fibre
GB/T 17830-1999 Determination of polyethylene glycol in polyethoxylated nonionic surfactants by HPLC
GB/T 37196-2018 Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones
GB/T 5560-2003 Nonionic surface active agents-Determination of polyethylene glycols and non-ionic active matter(adducts)-Weilbull method
GB/T 45556-2025 Determination of pentosan content in plant-derived products—Gas chromatography/mass spectrometry method
GB/T 24282-2021 Plastics—Determination of xylene-soluble matter fraction in polypropylene
GB/T 24282-2009 Plastics—Determination of xylene-soluble matter in polypropylene
GB/T 35859-2018 Determination of ethylene glycol monoethyl ether insoluble contents in polymer materials for offset printing plates—Filtering method
GB/T 7139-2002 Plastics--Vinyl chloride hompopolymers and copolymers--Determination of chlorine content
GB/T 23835.5-2009 Lithium perchlorate anhydrous - Part 5: Determination of chloride content
GB/T 7139-2023 Plastics—Vinyl chloride homopolymers and copolymers—Determination of chlorine content
GB/T 12688.3-1990 Styrene for industrial use-Determination of content of polymer-Photometric method
GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content
GB/T 40641-2021 Determination of polyprenol from pine needles—High performance liquid chromatography
GB/T 21993-2008 Polyvinyl chloride resins - Determination of the content of methanol or ethanol extract
GB/T 17830-2017 Determination of polyethylene glycol content in nonionic ethoxylatedsurfactants―HPLC method
GB/T 19186-2003 Propylene for industrial use - Determination of oligomers - Gas chromatographic method
GB/T 12008.7-2025 Plastics—Polyether polyols for use in the production of polyurethane—Part 7:Determination of basicity

Professional Standard - Agriculture

221药典三部-2015 Assay method 3119 General rules of polymer conjugate assay method 60
NY/T 2006-2011 Determination of β-glucan in cereal and its products
213药典四部-2015 3100 assay method 3119 polymer conjugate assay method
NY/T 2335-2013 Determination of pentosans in cereal—Spectro-photometric method
201药典四部-2020 3100 assay method 3119 polymer conjugate assay method
222药典三部-2010 Appendix Ⅷ ⅧL Determination of Polymer Conjugate Content
240药典三部-2020 Assay method 3119 polymer conjugate assay method

Group Standards of the People's Republic of China

T/QGCML 4545-2024 High temperature and high humidity resistant moisture content tester
T/SHXCL 000001-2019 Modified poly(lacticacid) materials—Calculation of biobased content
T/QBAA 001-2023 Determination of Mannan Content in Yeast Culture (Saccharomyces cerevisiae) -High Performance Liquid Chromatography
T/HJZB 001-2017 High content of precious metal jewelry
T/FJCA 004-2025 Determination of water-soluble β-glucan content in Hydrangea and its extracts
T/DLSHXH 004-2017 High solid acrylic polyurethane topcoat
T/CFA 0202101.2-2020 Medium temperature pattern wax Part 2:Filledtype
T/FHZY 001-2018 High content of precious metal jewelry
T/CASME 480-2023 High molecular weight styrene - maleic anhydride copolymers
T/CFIAS 6006-2024 Determination of mannan and β-glucan in saccharomyces cerevisiae culture—High performance liquid chromatography

Taiwan Provincial Standard of the People's Republic of China

CNS 12105-1987 Method of Test for Silicone Polymer Content in Paper

未注明发布机构

FORD WSS-M7J40-B-2012 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS 2 PARTS, ELECTRICAL INSULATING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M6C48-A-1991 HYDRAULIC FLUID - HIGH WATER CONTENT
FORD ESF-M7J40-A3-1991 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS 2 PARTS, ELECTRICAL INSULATING Shown on ESF-M7J40-A
FORD WSB-M1C208-A2-2008 GREASE, LITHIUM COMPLEX - POLYMER ADDITIVE - HIGH TEMPERATURE - NLGI #2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M33J100-A-1990 ENAMEL, ACRYLIC, HIGH SOLIDS, LOW VOC, EXTERIOR
FORD ESB-M99D53-A-2006 TUBING, FLUOROPOLYMER - HIGH HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M7J40-A2-1991 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS 2 PARTS, ELECTRICAL INSULATING Shown on ESF-M7J40-A
FORD WSH-M4D293-B2-2013 POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 20% MINERAL FILLED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M7J40-A-1991 VARNISH, HIGH TEMPERATURE POLYESTER RESIN, HIGH SOLIDS, 2 PARTS, ELECTRICAL INSULATING
FORD WSB-M4D724-A4-2005 STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED MOLDING COMPOUND, 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM RECLAIM AND/OR REGRIND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1002-A-2014 70% POLYPROPYLENE COPOLYMER (PP), 30% SISAL FIBER CONTENT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M1C185-B-2010 GREASE - CALCIUM COMPLEX, POLYMER ADDITIVE - HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WRS-M1H1221-A-2011 FABRIC, JAVA PATTERN, WOVEN 36 % PIR RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M5B400-A-1993 CONTROLLED-FOAM FLOOR AND HIGH-SOLIDS PAINT CLEANER
FORD ESB-M99D53-A-2013 TUBING, FLUOROPOLYMER - HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M7J40-A-2012 VARNISH, HIGH TEMPERATURE POLYESTER RESIN - HIGH SOLIDS 2 PARTS - ELECTRICAL INSULATING ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Machinery

JB/T 14808-2025 Test method for oligomer content of polyester film for electrical insulation

Hebei Provincial Standard of the People's Republic of China

DB1331/T 117-2025 Technical requirements for school sports venues

Professional Standard - Petrochemical Industry

SH/T 1814-2020 Determination of vanadium content in ethylene- -propylene copolymer( EPM) and ethylene- -propylene- -diene terpolymers( EPDM)
SH/T 1485.3-1995 Determination for polymer content in industrial divinylbenzene - Gas chromatography method

Professional Standard - Light Industry

QB 1036-1991 Determination of Fluoride Content in Industrial Sodium Tripolyphosphate Stpp - Potentiometric Method
QB 1035.3-1991 Determination of fluoride content in food additive sodium tripolyphosphate
QB/T 1035.3-1991 Food Additive - Determination of Fluoride Content in Sodium Tripolyphosphate

Professional Standard - Non-ferrous Metal

YS/T 1490-2021 Detection method for inclusion content in nickel-based high-temperature alloy powder

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2399-2022 Technical specification for high polymer grouting in large water inflow tunnel engineering

Professional Standard - Medicine

YY/T 1431-2016 Implants for surgery—Medical-grade ultra-high molecular weight polyethylene yarns

British Standards Institution (BSI)

BS ISO 16620-5:2017 Plastics. Biobased content. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
BS ISO 16620-3:2015 Plastics. Biobased content. Determination of biobased synthetic polymer content
BS EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
BS EN ISO 16931:2001 Animal and vegetable fats and oils. Determination of polymerized triglycerides content by high performance size-exclusion chromatography (HPSEC)
25/30483194 DC BS EN ISO 1158 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
BS 7164-7.1:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of polymer content. Polyisoprene content
08/30176577 DC BS ISO 16931. Animal and vegetable fats and oils. Determination of polymerized triglycerides content by high-performance size-exclusion chromatography (HPSEC)
BS 2782-4 Methods 452D to 452F:1978 Methods of testing plastics - Chemical properties - Determination of pH of water extract of polyolefin compound - Determination of water-soluble sulphates in polyolefin compound - Determination of water-soluble chlorides in polyolefin compound
BS ISO 5834-1:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Powder form
BS ISO 5834-2:2009 Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS ISO 5834-2:2011 Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS ISO 5834-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Oxidation index measurement method
BS 3531-21:1986 Surgical implants-Specification for ultra-high molecular mass polyethylene in moulded form
BS ISO 16620-4:2016 Plastics. Biobased content. Determination of biobased mass content
BS ISO 17190-10:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for determination of extractable polymer content by potentiometric titration
BS ISO 15373:2001 Plastics - Polymer dispersions - Determination of free formaldehyde
BS ISO 16620-4:2024 Plastics. Biobased content - Determination of biobased mass content
BS ISO 5834-1:2025 Implants for surgery. Ultra-high-molecular-weight polyethylene - Powder form
BS EN ISO 14939:2001 Animal feeding stuffs - Determination of carbadox content - Method using high performance liquid chromatography
BS ISO 5834-3:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Accelerated ageing methods
BS 3531-20:1986 Surgical implants-Specification for ultra-high molecular mass polyethylene in powder form
BS ISO 5834-2:2025 Implants for surgery. Ultra-high-molecular-weight polyethylene - Moulded forms
BS ISO 16620-2:2015 Plastics. Biobased content. Determination of biobased carbon content
BS ISO 16620-2:2019 Plastics. Biobased content - Determination of biobased carbon content
BS ISO 5834-4:2025 Implants for surgery. Ultra-high-molecular-weight polyethylene - Oxidation index measurement method

Japanese Industrial Standards Committee (JISC)

JIS K 7229:1995 Determination of chlorine in chlorine-containing polymers, copolymers and their compounds
JIS K 7385:2002 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content

GCC Standardization Organization

GSO ISO 16620-5:2021 Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
GSO ISO 16620-3:2015 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
GSO ISO 1158:2015 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
GSO CODEX STAN 230:2007 Maximum levels for lead
GSO ISO 4576:2013 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)
GSO ISO 2066:2015 Resilient floor coverings -- Determination of moisture content of agglomerated composition cork

Bureau of Indian Standards

IS 17948-5-2022 Plastics-Biobased Content - Part 5 Declaration of Biobased Carbon Content, Biobased Synthetic Polymer Content and Biobased Mass Content
IS 17948-3-2022 Plastics-Biobased Content - Part 3 Determination of Biobased Synthetic Polymer Content

International Organization for Standardization (ISO)

ISO 16620-5:2017 Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
ISO 16620-3:2015 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content
ISO 4576:1978 Plastics; Aqueous dispersions of homopolymers and copolymers; Determination of gross particle content by sieve analysis
ISO 4576:1996 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO 351:1984 Solid mineral fuels; Determination of total sulfur; High temperature combustion method
ISO 1148:1975 Title missing - Legacy paper document
ISO 1148:1980 Plastics; Aqueous dispersions of polymers and copolymers; Determination of pH
ISO 1625:1977 Plastics; Aqueous dispersions of polymers and copolymers; Determination of residue at 105 degrees C
ISO 17190-10:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 10: Test method for determination of extractable polymer content by potentiometric titration

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 16620-5:2022 Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
BH GSO ISO 16620-3:2017 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
BH GSO ISO 1158:2016 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
BH GSO ISO 2066:2017 Resilient floor coverings -- Determination of moisture content of agglomerated composition cork

Polski Komitet Normalizacyjny (PKN)

PN C04229-1974 Rubber Calculating of rubber polymer content
PN C89062-1959 Polystyrene. Determination of methanol content of soluble matter
PN C89421-1991 Aqueous dispersions of polymers and copolymers. Determination of gross particle content by sieve analysis
PN C05060-1986 Rubbers latices synthetic Determination of rubber polymer eon tent
PN E04160-39-1990 Electric cables Methods of testing Carbon black and/or mineraL content measurement in PE

Yugoslav Association for Standardization

JUS G.S1.506-1988 Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine
JUS G.S1.503-1983 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water)
JUS H.B8.814-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the chloride content (as chlorine ion)
JUS G.S1.505-1992 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer (VC) in polymer material and articls by gas chromatographic method
JUS H.G8.487-1991 Reagents. Potassium permanganate. Determination of chlorides content. Turbidimetric raethod
JUS H.G8.486-1991 Pure chemicals Potassium permanganate DETERMINATION OF THE CONTENT OF MATTER INSOLUBLE IN WATER Gravimetric method

Magyar Szabványügyi Testület

MSZ KGST 1241-1978 Determination of sulfur content in lead polymers
MSZ KGST 1153-1978 Determination of zinc content in lead polymers
MSZ KGST 1249-1978 Determination of gold and silver content of lead polymers
MSZ KGST 1226-1978 Determination of phosphorus content in iron ores, polymers, lumps and ingots
MSZ KGST 1228-1978 Determination of alumina content of iron ores, polymers, lumps and ingots
MSZ KGST 1225-1978 Determination of silica content of iron ores, polymers, lumps and ingots
MSZ KGST 1205-1978 Determination of silica content in manganese ores, polymers and lumps
MSZ KGST 960-1978 Concepts for determining moisture content, concentrates and agglomerates

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.3.26.2-1995 Mobile Ion Content of Polymer Films

Finnish Standards Institute

SFS-ISO 1158 E:1986 This standard is approved in English

Korean Agency for Technology and Standards (KATS)

KS M ISO 706-2009(2019) Rubber latex－Determination of coagulum content(sieve residue)
KS M ISO 706-2024 Rubber latex－Determination of coagulum content(sieve residue)
KS M ISO 2453:2009 Rubber, raw styrene-butadiene, emulsion-polymerized-Determination of bound styrene content-Refractive index method
KS M ISO 2453:2014 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M ISO 1158-2002(2017) Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content
KS M ISO 1158-2022 Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content
KS M ISO 1158:2002 Plastics-Vinyl chloride homopolymers and copolymers-Determination of chlorine content
KS M ISO 1158-2002(2022) Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content
KS M 1066-2005 Determination of PBBs and PBDEs in polymer materials by HPLC/UV
KS M 3826-1993 Determination of Chlorine in Chlorine-containing Polymers,Copolymers and their Compounds
KS M ISO 2066-2024 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
KS M 5969-1995 Testing method or isocyanate group content in urethane materials or prepolymer
KS M 5969-2023 Testing method of isocyanate group content in urethane intermediate or prepolymer
KS M ISO 2066-2020 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
KS M ISO 2066:2020 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
KS K 0738-2007(2012) Test method for plasticizer mixtures of polyvinyl chloride coated fabrics
KS M 0169-2010 Determination of the hexavalent chromium in polymers by UV-Visible spectrophotometry(organic solvent dissolution method)
KS E ISO 351:2003 Solid mineral fuels－Determination of total sulfur－High temperature combustion method
KS P ISO 17190-10:2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 10:Test method for determination of extractable polymer content by potentiometric titration
KS P ISO 17190-10-2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 10:Test method for determination of extractable polymer content by potentiometric titration

German Institute for Standardization

DIN EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998
DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
DIN EN ISO 1158:1998-06 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998
DIN 53594-1:1972 Determination of coagulum content in natural rubber latex
DIN EN ISO 16931:2002 Animal and vegetable fats and oils - Determination of polymerized triglyceride content by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001)
DIN 53189:1972 Testing the solids content of aqueous polymer dispersions
DIN 53718:1961 Testing the methanol soluble content in polystyrene
DIN EN ISO 1158 E:2025-02 Draft Document - Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO/DIS 1158:2025); German and English version prEN ISO 1158:2025
DIN ISO 4576:2001-03 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
DIN EN 12105:1998-10 Resilient floor coverings - Determination of moisture content of agglomerated composition cork; German version EN 12105:1998
DIN EN ISO 16931:2002-04 Animal and vegetable fats and oils - Determination of polymerized triglyceride content by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001)
DIN 65427-1:1984-09 Aerospace; aromatic polyamide (aramid); fabric of high modulus filament yarn; dimensions, masses
DIN EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content English version of DIN EN 15334:2007-05
DIN EN ISO 14939:2001 Animal feeding stuffs - Determination of carbadox content - Method using high-performance liquid chromatography (ISO 14939:2001); German version EN ISO 14939:2001
DIN ISO 10315 E:2021-10 Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method
DIN ISO 10315:2000 Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method (ISO 10315:2000)
DIN ISO 10315 E:2015-11 Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method
DIN ISO 10315:2022-04 Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method

Danish Standards Foundation

DANSK DS/EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
DS/EN ISO 1158:1999 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
DS/EN 12105:1999 Resilient floor coverings - Determination of moisture content of agglomerated composition cork
DANSK DS/EN 12105:1998 Resilient floor coverings - Determination of moisture content of agglomerated composition cork
DS/ISO 17190-10:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 10: Test method for determination of extractable polymer content by potentiometric titration

Swedish Institute for Standards

SS-ISO 1158:1987 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine
SS-ISO 16620-5:2018 Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content (ISO 16620-5:2017, IDT)
SS-EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
SS-ISO 16620-3:2018 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content (ISO 16620-3:2015, IDT)
SS-ISO 4576:1996 Plastics - Polymer dispersions - Determination ofsieve residue (gross particle and coagulum content)
SS-ISO 351:1996 Solid mineral fuels - Determination of total sulfur - High temperature combustion method

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 1158:2015 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
OS GSO ISO 4576:2013 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)

United States Navy

NAVY QPL-TT-P-2760-QPD-2010 Primer Coating: Polyurethane, Elastomeric, High-Solids
NAVY QPL-TT-P-2760-2013 Primer Coating: Polyurethane, Elastomeric, High-Solids
NAVY MIL-C-24782-1993 COATING, POWDERED FLUOROPOLYMER FOR USE ON HIGH PRESSURE GAS FLASK INTERIORS

Gosstandart of Russia

GOST 26359-1984 Polyethylene. Method for determination of volatile matters content
GOST R ISO 16620-3-2022 Plastics. Biobased content. Part 3. Determination of biobased synthetic polymer content
GOST 14043-1978 Polyvinylchloride and vinylchloride copolymers. Method for determination of moisture and volatile matters content
GOST R ISO 16620-5-2022 Plastics. Biobased content. Part 5. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
GOST 33847-2016 Polymer composites. Determination of the moisture content of the reinforcing fillers
GOST 17824-1981 Polyamides, polyamide yarns and fibres. Methods for determination of extractable materials
GOST 17824-2005 Polyamides, polyamide fibres, fabrics. Methods for determination of extractable materials content
GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent
GOST 30622.1-1998 Cigarettes. Determination of water in smoke condensates. Gas-chromatographic method
GOST R 57952-2017 Fluoropolymers. Determining temperatures and heat of transition by differential scanning calorimetry
GOST 30622.1-2003 Cigarettes. Determination of water content in smoke condensate. Gas-chromatographic method
GOST 32664-2014 Polymer composites. Prepregs and premixes. Determination of apparent volatile-matter content

GM North America

GM GMP.POM.012-1989 Acetal - High Molecular Weight Copolymer
GM GMP.PE.011-2003 Polyethylene-High Density, Homopolymer
GM GMP.PP.096-1998 Polypropylene - High Heat, High Crystalline, UV Stabilized Copolymer
GM GMP.PE.050-1991 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.062-2001 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.061-1990 Polyethylene - High Density, HMW, Blow Molding, Copolymer
GM GMP.PE.003-2001 Polyethylene - High Density, Extrusion Grade, Copolymer
GM GMP.POM.003-1994 Acetal - Homopolymer, High Impact
GM GM6091M-1997 Fluoropolymer Painted Aluminum Sheet
GM GMP.PE.008-1998 Polyethylene - High Density, Copolymer, Injection Molding (Revision B)
GM GMP.POM.009-2002 Acetal - Homopolymer, High Flow
GM GMP.POM.004-1994 Acetal - Homopolymer, High Flow

American Society for Testing and Materials (ASTM)

ASTM D6666-04(2014) Standard Guide for Evaluation of Aqueous Polymer Quenchants
ASTM C1159-98(2012) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM C1159-98(2008) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM C1159-98(2003) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM C1159-98 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
ASTM RR-D16-1053 2015 D2121-Test Methods for Polymer Content of Styrene Monomer
ASTM D2121-15 Standard Test Methods for Polymer Content of Styrene Monomer
ASTM RR-D16-1068 2019 D7977-Test Methods for Polymer Content of AMS (-Methylstyrene)
ASTM D2121-16 Standard Test Methods for Polymer Content of Styrene Monomer
ASTM D2121-23 Standard Test Methods for Polymer Content of Styrene Monomer
ASTM D7977-19 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)
ASTM STP 382-1965 Effects of polymer degradation on the flow properties of polymer-containing fluids and lubricants
ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D7977-23 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)
ASTM D7977-14 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)
ASTM D5227-95 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

Belgian Standards Institute

NBN I-880-1968 Concrete polymer. Measurement of sulfate content
NBN I-989-1969 Polymers for mortar and concrete. Measurement of water and sand content
NBN T 04-133-1983 Higher alcohols for industrial use - Determination of car-boiiyl compounds content - Potentiometric method

Association Francaise de Normalisation

NF T51-026*NF EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
NF T51-251:1984 Plastics. Aqueous dispersions of polymers and copolymers. Measurement of density.
NF T51-271:1976 Plastics. Aqueous dispersions of homopolymers or copolymers. Determination of particle content by sieving.
NF EN ISO 16931:2009 Fats of animal and vegetable origin - Determination of the content of polymerized triacylglycerols by high performance exclusion liquid chromatography (exclusion HPLC)
NF V03-751:1985 SORGHUM. DETERMINATION OF TANNIN CONTENT.
NF T60-247:1994 Animal and vegetable fats and oils. Determination of polymerized triglycerides content.
NF D14-400*NF EN 15334:2008 Sanitary appliances - Methacrylic dispersions of high filler content.
NF T20-492:1973 Sodium tripolyphosphate for industrial use. Estimation of tripolyphosphates content. Cobalt triethylenediamine chloride gravimetric method.
NF T51-252:1984 Plastics. Aqueous dispersions of polymers and copolymers. Measurement of superficial tension dynamic method by immersion foil.
NF T60-240:1983 ANIMAL AND VEGETABLE FATS AND OILS. DETERMINATION OF CONTENT OF SYNTHETIC POLYMERS SOLUBLE IN TETRACHLOROETHYLENE.

Spanish Association for Standardization (UNE)

UNE 53930-2:2019 Plastics. Plastic carrier bags with high content in recycled plastic for product carriage. Part 2: Polyethylene (PE) carrier bags
AENOR UNE-EN ISO 1158:1999 PLASTICS. VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS. DETERMINATION OF CHLORINE CONTENT. (ISO 1158:1998).
UNE-EN ISO 1158:1999 PLASTICS. VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS. DETERMINATION OF CHLORINE CONTENT. (ISO 1158:1998).
UNE 48294:2004 Paints and varnishes. High solid content polyurethane aliphatic paint.
AENOR UNE 48294:2016 Paints and varnishes. High solids content aliphatic polyurethane paint.
UNE-CEN/TS 17761:2022 Inorganic fertilizers - Determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 12105:1999 RESILIENT FLOOR COVERINGS. DETERMINATION OF MOISTURE CONTENT OF AGGLOMERATED COMPOSITION CORK.
UNE 103204:1993 ORGANIC MATTER CONTENT OF A SOIL BY THE POTASSIUM PERMANGANATE METHOD.
AENOR UNE-EN 12105:1999 Resilient floor coverings - Determination of moisture content of agglomerated composition cork
UNE 103204:1993 ERRATUM ORGANIC MATTER CONTENT OF A SOIL BY THE POTASSIUM PERMANGANATE METHOD.

Lithuanian Standards Office

LST EN ISO 1158:2000 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
LST EN 12105-2002 Resilient floor coverings - Determination of moisture content of agglomerated composition cork

European Committee for Standardization (CEN)

EN ISO 1158:1998 Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content ISO 1158:1998
prEN ISO 1158 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO/DIS 1158:2025)
EN ISO 16931:2009 Animal and vegetable fats and oils - Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2009)
EN ISO 16931:2001 Animal and Vegetable Fats and Oils - Determination of Polymerized Triglycerides Content by High-Performance Size-Exclusion Chromatography (HPSEC) ISO 16931:2001
EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content

Standards Norway

NS-EN ISO 1158:1998 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content (ISO 1158:1998)
NS-EN 12105:1998 Resilient floor coverings — Determination of moisture content of agglomerated composition cork

Netherlands Institute for Standardization

NEN 6355-1984 Vegetable and animal oils and fats - Determination of polyethylene content
NEN 6348-1988 Vegetable and animal oils and fats Determination of polymerized triglycerides content
NEN 5941-1988 Aggregates for concrete - Determination of highly expanding clay minerals content

Natural Gas Processor's Association (NGPA)

GPA RR-110-1987 Thermophysical Properties for Special High CO2 Content Mixtures

Türk Standardları Enstitüsü

TS 3425-1979 PLASTICS-AQUEOUS DISPERSIONS OF HOMOPOLYMERS AND COPOLYMERS-DETERMINATION OF GROSS PARTICLE CONTENT BY SIEVE ANALYSIS
TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT

Society of Automotive Engineers (SAE)

SAE AS22759/15-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/15 Wire, Electric, Fluoropolymer-Insulated, FEP-PVF2, Light Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt
SAE AS22759/15A-2020 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, ROHS
SAE AS22759/15A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, ROHS
SAE AS22759/53C WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/46-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/19-2008 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150°C
SAE AS22759/17A WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150 °C, ROHS
SAE AS22759/53A WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/53 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT
SAE AS22759/53B WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/35A WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/35-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/17-2008 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150°C
SAE AS22759/35 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated, High-Strength Copper Alloy, 200°C, 600 Volt
SAE AS22759/42-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/19A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150 °C, ROHS
SAE AS22759/35B WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/42 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Nickel-Coated High-Strength Copper Alloy, 200°C, 600 Volt
SAE AS22759/17 Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150°C
SAE AS22759/42-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/35-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT
SAE AS22759/19A-2019 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150 °C, ROHS
SAE ARP6167-2013 Etching of Fluoropolymer Insulations
SAE AS22759/42A WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/17A-2019 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150 °C, ROHS
SAE AS22759/35A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/42A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/17A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150 °C, ROHS
SAE AS22759/35A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/42A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/57A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/56A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/47 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Lightweight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt
SAE AS22759/60-2022 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINEKD MODIFIED ETFE, FLUORIDE CONTROLLED, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/31 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Nickel-Coated High Strength Copper Alloy Conductor, 600-Volt
SAE AS22759/30B-2019 WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED EXTRUDED TFE@ POLYIMIDE COATED@ SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR@ 600-VOLT@ ROHS
SAE AS22759/30-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/49 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Normal Weight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt
SAE AS22759/53-2013 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Normal Weight, Silver-Coated High Strength Copper Alloy, 200 degree C, 600 Volt
SAE AS22759/22-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/20-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 1000-VOLT
SAE AS22759/22 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt
SAE AS22759/21 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated High Strength Copper Alloy Conductor, 1000-Volt
SAE AS22759/23-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/30A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, ROHS
SAE AS22759/21-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 1000-VOLT
SAE AS22759/23 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated High Strength Copper Alloy Conductor, 600-Volt
SAE AS22759/31-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS22759/30-2001 WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED@ EXTRUDED TFE@ POLYIMIDE COATED@ SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR@ 600-VOLT
SAE AS22759/57 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/56A WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/49A-2020 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED HIGH-STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/49B-2021 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED HIGH-STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/49B Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Normal Weight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt, ROHS
SAE AS22759/49A-2015 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED HIGH-STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/30 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt
SAE AS22759/49A Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Normal Weight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt, ROHS
SAE AS22759/57A WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/56 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
SAE AS22759/31A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, ROHS

American Association of State Highway and Transportation Officials

T302-1994 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Nineteenth Edition)
T302-1995 Standard Method of Test for Polymer Content of Polymer Modified Emulsions (Eighteenth Edition)
AASHTO T302-1999 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions Twentieth Edition
T 302-2004 Standard Method of Test for Polymer Content of Polymer-Modified Emulsions and Asphalt Binders
AASHTO T 302-2005 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T 302-2015 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
T 302-2005 Standard Method of Test for Polymer Content of Polymer- Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T 302-2005(R2009) Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T 302-2015(R2019) Standard Method of Test for Polymer Content of Polymer- Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T 302-2005(2013) Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T 302-2022 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
AASHTO T 302-2015(2019) Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders

ISUZU - Isuzu Motors Ltd.

ISC-C92-009-2008 Polypropylene Material for Interior@ High Flexural Modulus@ High Impact Modified Copolymer Type D
ISC-C92-035-2009 Polypropylene material for interior@ high flexural modulus copolymer ―Type:I-3
ISC-C92-033-2009 Polypropylene material for interior@ high flexural modulus@ high impact modified copolymer ―Type:I-1
ISC-C92-036-2009 Polypropylene material for exterior@ high flexural modulus@ high impact modified copolymer ―Type:E-1a
ISC-C92-030-2009 Polypropylene material for exterior@ 1050MPa flexural modulus@ high impact modified copolymer
ISC-C92-025-2009 Polypropylene material for interior@ 1500MPa flexural modulus@ high impact modified copolymer
ISC-C92-007A-2013 Polypropylene Material Type B for Exterior@ 1700MPa Flexural Modulus@ High Impact Modified Copolymer
ISC-C92-024A-2009 Polypropylene material type E for exterior@ 1200MPa flexural modulus@ high impact modified copolymer

Indonesia Standards

SNI 7385-2009 Mycotoxin maximum level content on food
SNI 8206:2015 Superabsorbent polymer

Czech Standards Institute (UNMZ)

CSN 68 4150-1987 Detennination of content of substances cducing potassium permenganate
CSN 64 0324-1980 Polyvinylchloride. ethod for determination of extractible atter by methanol or diethylether
CSN 64 9008-1986 Aqueous dispersions of homopolyntors nd copolymers. Detormination of oagulum and rough admixtures- ontent by sievo analysis

GM Europe

GME QK 001019-1983 Polyethylen hoher Dichte mit 20 Massenanteil in % Glasfasern Polyethylene High Density with 20 % by Mass Glass Fibre German
GME QK 001139-1983 Polyamid 66 mit 40 Gew.% mineralischer F黮lstoffe Polyamide 66 with 40 % by Mass Mineral Filler German
GME QK 001155-1983 Polyamid 66 mit 40 Massenanteil in % mineralischer F黮lstoffe Polyamide 66 with 40 % by Mass Mineral Filler German
GME QK 001806-2007 Polypropylen-Homopolymerisat mit Mineralien Polypropylene Homopolymer with Minerals English/German
GME QK 001020-1983 Polypropylen-Homopolymerisat hochw鋜mebest鋘dig Polypropylene-Homopolymer, High Heat Resistant German
GME QK 001880-2005 Polyamid 6 mit Mineralien Polyamide 6 with Minerals
GME QK 001871-2003 Polyamid 6 mit Mineralien Polyamide 6 with Minerals
GME QK 000350-1983 Acetal copolymer (POM) with 30% by mass glass spheres and 15% by mass PTFE Acetal copolymer (POM) with 30% by mass glass spheres and 15% by mass PTFE German
GME QK 000344-2010 Polyoxymethylene copolymers containing mineral materials. 1st edition. English/German
GME QK 001034-1988 Polypropylen-Homopolymerisat mit Talkum Polypropylene-Homopolymer with Talc English/German
GME QK 001802-2005 Polypropylen-Copolymerisat mit Talkum Polypropylene Copolymer with Talc English/German
GME QK 001812-2007 Polypropylene - Copolymer with Talc (English/German)
GME QK 000054-1989 Polypropylen-Homopolymerisat mit Talkum Polypropylene-Homopolymer with Talc English/German
GME QK 001029-2004 Polypropylene Copolymer with Talc (English/German)
GME QK 001039-1989 Polypropylen-Copolymerisat mit Talkum Polypropylene-Copolymer with Talc English/German
GME QK 001819-2007 Polypropylen - Homopolymer mit Talkum Polypropylene - Hompolymer with Talc English/German
GME QK 001030-1989 Polypropylen-Copolymerisat mit Talkum Polypropylene-Copolymer with Talc English/German
GME QK 001833-2004 Polypropylen-Copolymer mit Talkum Polypropylene Copolymer with Talc English/German
GME QK 000028-1988 Polypropylen-Homopolymerisat 30 Massenanteil in % Glasfasern Polypropylene-Homopolymer 30 % by Mass Glass Fibres English/German [Replaced: GME QK 000026]
GME QK 001038-1996 Polypropylen-Copolymerisat mit Talkum Polypropylene-Copolymer with Talc English/German
GME QK 001817-2007 Polypropylen-Copolymer mit Talkum Polypropylene Copolymer with Talc English/German
GME QK 000029-1987 Polypropylen-Homopolymerisat mit Glasfasern Polypropylene-Homopolymer with Glass Fibres German
GME QK 001044-2003 Polypropylene copolymers with talc English/German
GME QK 001801-2007 Polypropylen-Copolymerisat mit Talkum Polypropylene Copolymer with Talc English/German
GME QK 001811-2007 Polypropylen - Copolymer mit Talkum Polypropylene - Copolymer with Talc English/German
GME QK 000043-1987 Polypropylen-Homopolymerisat mit Glasfasern Polypropylene-Homopolymer with Glass Fibres German
GME QK 001816-2007 Polypropylene copolymers with talc English/German

National Electrical Manufacturers Association（NEMA)

NEMA HP 100.2-1985 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROPOLYMERS
NEMA HP 100.4-1985 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ECTFE FLUOROPOLYMERS
NEMA HP 100.4-1991 High Temperature Instrumentation and Control Cables Insulated and Jacketed with ECTFE Fluoropolymers

Ente Nazionale Italiano di Unificazione

UNI 10579:1997 Elastomers. Solution polymers. Determination of molecolar weight distribution.
UNI 8490-9:1984 Aqueous dispersions of polymers and copolymers. Test methods Determination of di-butylphtalate content in dispersions of homo- and copolymers of vinyl acetate.
UNI 2095:1942 Cork boards
UNI 8490-6:1984 Aqueous dispersions of polymers and copolymers. Test methods Determination of gross particle content by sieve analysis.
UNI 8490-7:1984 Aqueous dispersions of polymers and copolymers. Test methods Quantitative determination of plasticizer in dispersions of homo- and copolymers of vinyl acetate.
UNI 8520-14:1984 Aggregates for use in concretes. Colorimetric determination of organic impurities content of fine aggregates.
UNI SPERIMENTALE 8520-12:1984 Aggregates for use in concretes. Determination of water soluble chlorides.

GM Daewoo

GMKOREA EDS-M-5202-2012 High impact strength polyoxymethylene copolymer
GMKOREA EDS-M-5212-2012 High Impact Strength Polyoxymethylene Homopolymer

National Standardisation Body (ASRO)

STAS 10726-1976 1,4 CIS BUTADIENE RUBBER WITH HIGH CIS ISOMER CONTENT, POLYMERIZED IN SOLUTION General technical requirements for quality
STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS 4242/6-1987 HLAST FURNACE SLAG Dctennination of sulphur trioxide, totul sulphur and sulphur of sulphides

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 4916-2007 Solid mineral fuels.Determination of total sulfur.High temperature combustion method
TCVN 7080-2010 Milk and dried milk.Determination of iodide content.Method using high-performance liquid chromatography

Deutsche Vereinigung des Gas- und Wasserfachs

DVGW G 267:2015-12 Oxygen Content in High Pressure Grids

Canadian General Standards Board （CGSB)

CAN/CGSB 4.2 No.14.3-M88-1988 Textile testing methods - Quantitative analysis of fiber blends - Binary blends containing polyester - 75% sulfuric acid method