How much low temperature and humidity

How much low temperature and humidity, Total:273 items.

The international standard classification for "How much low temperature and humidity" includes: Mechanical testing , Optical equipment , Refrigerating technology , Geology. Meteorology. Hydrology , Test conditions and procedures in general , Mineral and metal fibres , Gases for industrial application , Thermodynamics and temperature measurements , Buildings and installations for processing and storage of agricultural produce , Lubricants, industrial oils and related products .

The Chinese standard classification for "How much low temperature and humidity" includes: Mechanical vibration, impact equipment and dynamic balancing machine , Optical instrument in general , Refrigeration equipment , Asbestos material , Meteorology , Basic standards and general methods , Building material raw material ore , Gas separation and liquefaction equipment , Chemical Measurement , Thermal Measurement , Agricultural products and feed processing machinery , Lubricating oil , Sensitive component and sensor , Dedicated inspection equipment .

Group Standards of the People's Republic of China

T/CDJL 002-2023 Calibration method of online temperature and humidity measurement system
T/CAS 302-2018 Performance technical specification for Multi-connected low ambient temperature air source heat pump air heaters
T/CAS 444-2020 Temperature and humidity double-control multi-connected air-condition(heat pump) unit
T/QGCML 2029-2023 Laboratory temperature and humidity management specifications
T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
T/QGCML 1573-2023 Temperature and humidity collector
T/GDFS 47-2024 Technical specification for in vitro cryopreservation of slash pine germplasm resources
T/GXAS 682-2024 Technical code of practice for breeding and conservation of high temperature and humidity resistant silkworm varieties
T/QGCML 1502-2023 Combined temperature and humidity adjustment device for multi-span film greenhouses
T/JAR 002/1-2021 Digital temperature and humidity recorder
T/DAWS 0004-2019 Cold chain logistics temperature and humidity control requirements and temperature measurement methods
T/CASME 53-2022 Temperature and humidity controller for high voltage switchgear

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25857-2022 Low ambient temperature air source multi-connected heat pump（air-conditioning）unit
GB/T 35226-2017 Specifications for surface meteorological observation―Air temperature and humidity
GB/T 6646.2-1986 Method for wet classification of chrysotile asbestos fibre by length distribution
GB/T 12085.2-2010 Optics and optical instruments—Environmental test methods—Part 2:Cold,heat,humidity
GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
GB/T 8073-1987 Method of wet determination for loftiness of chrysotile asbestos
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 12085.2-2022 Optics and photonics—Environmental test methods—Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
GB/T 44279-2024 Temperature-humdity-vibration-low pressure combined environmental testing system
GB/T 4797.1-2018 Classification of environmental conditions—Environmental conditions appearing in nature—Temperature and humidity
GB/T 25857-2010 Low ambient temperature air source multi-connected heat pump(air conditioning) unit

Professional Standard - Machinery

JB/T 6862-2014 Thermohygrograph
JB/T 5905-2000 Cryogeinc liquid containers insulated with evacuated multilayer insulations
JB/T 6862-1993 Hygrometer

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 861-2015 High temperature and low humidity meteorological disaster grade of Gannan navel orange
DB36/T 861-2023 Navel orange high temperature and low humidity disaster level

National Metrological Verification Regulations of the People's Republic of China

JJG 205-2005 Verification Regulation of Mechanical Thermo-hygrometers

National Metrological Technical Specifications of the People's Republic of China

JJF 1564-2016 Calibration Specification for Temperature and Humidity Standard Chambers
JJF 1101-2019 Calibration Specification of Environmental Testing Equipment for Temperature and Humidity Parameters
JJF(纺织) 104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity
JJF 1170-2007 Calibration Specification for Cryogenic Resistance Thermometers with Negative Sensitivity
JJF 1101-2003 Calibration Specification for the Equipment of the Environmental Testing for Temperature and Humidity
JJF 2192-2025 Calibration Specifications for Low Frost Point Humidity Generators
JJF 1171-2024 Calibration specifications for temperature and humidity circuit detectors
JJF(纺织)104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity

Professional Standard - Meteorology

QX/T 16-2020 Calibration chambers for temperature and humidity instrument

Professional Standard - Supply and Marketing Cooperative

GH/T 1099-2014 Testing method for temperature and humidity of seedcotton stack
GH/T 1098-2014 Seedcotton stack temperature and humidity monitoring instrument

Guizhou Provincial Standard of the People's Republic of China

DB52/T 538-2008 Calibration Specifications for Temperature and Humidity Meters

Professional Standard - Military and Civilian Products

WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments
WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments

Professional Standard - Aerospace

QJ 1177.18-1987 Environmental test methods for ground-to-air and ship-to-air missile weapon systems Temperature humidity vibration low pressure test

Hebei Provincial Standard of the People's Republic of China

DB13/T 1702-2013 Digital display temperature and humidity meter test method

Professional Standard - Petrochemical Industry

SH/T 0732-2004 Standard test method for low temperature low shear rate viscosity/temperature dependence of lubricating oils using a temperature - scanning technique

Military Standard of the People's Republic of China-General Armament Department

GJB 150.19-1986 Environmental test methods for military equipment temperature-humidity-altitude test
GJB 5020-2003 Calibration method for comprehensive temperature, humidity and vibration test equipment
GJB 2660-1996 Specification for Multipurpose Low Temperature Greases

Professional Standard - Electron

SJ 20833-2002 Specification of temperature-humidity transmitter for type WSS-001
SJ/T 31388-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature moisture-heat test chambers

Jilin Provincial Standard of the People's Republic of China

DB22/T 1959-2013 Drug warehouse temperature and humidity management requirements

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1509-2017 Calibration specification for digital temperature and humidity meter

Gansu Provincial Standard of the People's Republic of China

DB62/T 4676-2023 Specifications for Monitoring Temperature and Humidity in Grotto Temple Caves

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2326-2017 Technical regulations for the detection of high temperature and humidity resistance of silkworm varieties

Professional Standard-Ships

CB 1171.4-1987 Environmental measurement method for ship equipment temperature and humidity

未注明发布机构

JEDEC JESD22-A118B.01-2018 ACCELERATED MOISTURE RESISTANCE - UNBIASED HAST

Professional Standard - Civil Aviation

MH/T 9002-2008 Standard values of atmospheric noise absorption as a function of temperature and humidity

Professional Standard - Aviation

HB 5830.16-1997 Environmental conditions and test methods for airborne equipment temperature-humidity-altitude

The American Society of Agricultural and Biological Engineers

ASAE D309.1-1987(2017) Wet Bulb Temperature and Wet Bulb Decompression

British Standards Institution (BSI)

BS EN 60068-2-39:2016 Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature. Temperatures below -80 C
BS ISO 23208:2017 Cryogenic vessels. Cleanliness for cryogenic service
BS EN ISO 23208:2019 Cryogenic vessels. Cleanliness for cryogenic service
BS EN ISO 23208:2019+A1:2020 Cryogenic vessels. Cleanliness for cryogenic service
11/30255443 DC BS EN 60068-2-39. Environmental testing. Part 2-39. Tests and Guidance. Combined temperature or temperature and humidity with low air pressure tests
BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80 C
PAS 62161-2000 Steady State Temperature Humidity Bias Life Test (Edition 1.0)
BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C
24/30457738 DC BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
BS EN 1252-2:2001 Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 °C and -20 °C
PAS 62177-2000 Highly-Accelerated Temperature and Humidity Stress Test (HAST) (Edition 1.0)
19/30398279 DC BS EN ISO 23208 AMD1. Cryogenic vessels. Cleanliness for cryogenic service
BS EN 60068-2-53:2010 Environmental testing - Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
10/30232129 DC BS ISO 16544. Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions

American National Standards Institute （ANSI)

ANSI/ATIS 0600010-2014 Temperature, Humidity, & Altitude Standards
ANSI/TIA/EIA 455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/TIA-455-162-A-1999(2013) FOTP-162 Optical Fiber Cable Temperature Humidity Cycling
ANSI/ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/TIA-455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI/TIA-455-162-A-1999 FOTP-162 Optical Fiber Cable Temperature-Humidity Cycling

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 3748-1994 Measurement of the Humidity Ratio of Moist Air Using a Thermo-Hygrometer
ASHRAE 3987-1996 Maintaining Temperature and Humidity in Non-Humidity-Generating Spaces
ASHRAE 3859-1995 Temperature and Humidity Control During Cooling and Dehumidifying by Compressor and Evaporator Fan Speed Variation
ASHRAE DA-07-046-2007 Monitored Indoor Moisture and Temperature Conditions in Humid-Climate US Residences
ASHRAE 3953-1996 Lines of Constant Skin Temperature with Varying Skin Wettedness
ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities
ASHRAE 4492-2001 Relative Humidity and Temperature Measurements and Predictions in Supermarkets
ASHRAE CI-01-11-2-2001 The Search for High Temperature Experimental Psychrometric Data (RP-1060)
ASHRAE CH-99-4-2-1999 Are There Optimum Temperature and Humidity Set Points for Supermarkets?
ASHRAE CH-93-2-1993 Heat Transfer Psychrometrics and Coil Frosting at Freezer Temperatures
ASHRAE 4139-1998 A Simple Methodology to Predict Local Temperature and Humidity
ASHRAE NA-04-8-4-2004 Predicting Indoor Temperature and Humidity Conditions Including Hygrothermal Interactions with the Building Envelope

GM North America

GM GM9329P-2003 High Temperature Humidity Aging
GM GM9131P-1994 Color Changes Due to Temperature or Humidity (Revision B)
GM 9986289-2009 Waterborne, Low Bake, Sprayable Damper, High Performance

Defense Logistics Agency

DLA MIL-W-36775 A-1979 WET BULB-GLOBE TEMPERATURE KIT

American Water Works Association (AWWA)

AWWA ACE94053 What is the Turbidity of Your Files?

Korean Agency for Technology and Standards (KATS)

KS C IEC 60068-2-39:2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39-2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39-2023 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS B ISO 23208:2018 Cryogenic vessels — Cleanliness for cryogenic service
KS B ISO 23208-2018(2023) Cryogenic vessels — Cleanliness for cryogenic service
KS B ISO 23208-2018 Cryogenic vessels — Cleanliness for cryogenic service
KS B 5218-1983 Etched-Stem liquid-in-glass wet & dry thermometer
KS C IEC PAS 62161:2002 Steady state temperature humidity bias life test
KS C IEC PAS 62161-2013 Steady state temperature humidity bias life test
KS B ISO 21028-1-2022 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B 5218-2021 Etched-Stem liquid-in-glass wet & dry thermometer
KS C IEC PAS 62161-2002(2012) Steady state temperature humidity bias life test
KS I ISO 8756-2020 Air quality－Handling of temperature, pressure and humidity data
KS B ISO 21028-1:2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B ISO 21028-1:2006 Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
KS B ISO 21028-1-2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS B ISO 21028-1-2017(2022) Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS R 0016-1971(2010) Method of high and low temperature test for automobile parts
KS C 6009-1992 Test methods for moisture resisrance of electronic components (Temperature/Humidity Cycling)
KS I ISO 8756-2005(2020) Air quality－Handling of temperature, pressure and humidity data
KS I ISO 8756:2005 Air quality-Handling of temperature, pressure and humidity data
KS B 5218-1983(2021) Etched-Stem liquid-in-glass wet & dry thermometer

International Electrotechnical Commission (IEC)

IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
IEC PAS 62177:2000 Highly-accelerated temperature and humidity stress test (HAST)
IEC PAS 62161:2000 Steady state temperature humidity bias life test

GCC Standardization Organization

GSO IEC 60068-2-39:2021 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
GSO ISO 12268:2015 Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C,...
GSO ISO 23208:2016 Cryogenic vessels -- Cleanliness for cryogenic service
GSO ISO 8756:2008 Air quality-Handling of temperature ,pressure and humidity data
GSO ISO 16544:2016 Thermal insulating products for building applications -- Conditioning to moisture equilibrium under specified temperature and humidity conditions

Association Francaise de Normalisation

NF C20-700-2-39*NF EN 60068-2-39:2016 Environmental testing - Part 2-39 : tests - Tests and guidance : combined temperature or temperature and humidity with low air pressure tests
NF EN 60068-2-39:2016 Environmental tests - Part 2-39: tests - Tests and guidelines: combined temperature or temperature and humidity tests at low atmospheric pressure
NF E86-509:1999 Cryogenic vessels. Cleanliness for cryogenic service.
NF E86-509/A1:2006 Cryogenic vessels - Cleanliness for cryogenic service.
NF EN ISO 23208:2019 Récipients cryogéniques - Propreté en service cryogénique
NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperatures - Part 1: temperatures below - 80 oC
NF E86-509/A1*NF EN ISO 23208/A1:2020 Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1
NF P75-221*NF EN 12429:1999 Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions.
NF EN ISO 23208/A1:2020 Récipients cryogéniques - Propreté en service cryogénique - Amendement 1
NF EN 4069:1996 Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en acier résistant à chaud, passives - Classification : 600 MPa (à température ambiante) /650 degrés Celsius.
NF E86-506-1*NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1 : temperatures below - 80 oC

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60068-2-39:2022 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BH GSO ISO 12268:2017 Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C,...
BH GSO ISO 23208:2017 Cryogenic vessels -- Cleanliness for cryogenic service
BH GSO ISO 10096:2017 Aerospace -- Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/

Spanish Association for Standardization (UNE)

UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
AENOR UNE-EN 60068-2-39:2016 Environmental tests. Part 2-39: Essays. Tests and guidance: Combined temperature or temperature and humidity tests with low air pressure.
UNE-EN 12300:1999 CRYOGENIC VESSELS. CLEANLINESS FOR CRYOGENIC SERVICE.
UNE-EN 12300:1999/A1:2006 Cryogenic vessels - Cleanliness for cryogenic service
UNE-EN ISO 23208:2020 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)
UNE-EN ISO 23208:2020/A1:2021 Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
AENOR UNE-EN 12429:1999 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
UNE 53509:1995 RUBBER. TIMES, TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING
UNE 77233:1996 AIR QUALITY. HANDLING OF TEMPERATURE, PRESSURE AND HUMIDITY DATA.
UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
AENOR UNE-EN ISO 21028-1:2017 Cryogenic containers. Toughness requirements for materials at cryogenic temperature. Part 1: Temperatures below -80 ºC. (ISO 21028-1:2016).

Comitato Elettrotecnico Italiano

CEI EN 60068-2-39:2017 Environmental testing Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

Danish Standards Foundation

DANSK DS/EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
DANSK DS/EN 12300:1999 Cryogenic vessels – Cleanliness for cryogenic service
DS/EN 12300:1999 Cryogenic vessels - Cleanliness for cryogenic service
DS/EN 12300/A1:2006 Cryogenic vessels - Cleanliness for cryogenic service
DANSK DS/EN ISO 23208:2019 Cryogenic vessels – Cleanliness for cryogenic service (ISO 23208:2017)
DANSK DS/EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions

Japanese Industrial Standards Committee (JISC)

JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
JIS B 7922:2023 Electronic wet-bulb globe temperature (WBGT) index meter

BE-NBN

NBN-EN 23270-1992 Paints, varnishes and their raw materials. Temperature and humidity required for temperature and humidity measurement and experiments

Gosstandart of Russia

GOST 25984.4-1983 Chrysotile asbestos. Method for determination of moisture content
GOST R ISO 8756-2005 Air quality. Handling of temperature, pressure and humidity data
GOST R 56632-2015 Products bakery of low humidity. Solomka. General specifications
GOST 12852.2-1977 Cellular concrete. Method for determining humidity and bulk density

Swedish Institute for Standards

SS-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
SS-EN 12300:1999 Cryogenic vessels - Cleanliness for cryogenic service
SS-EN 12429:1998 Thermal insulation for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
SS-EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO 21028-1:2016)
SS-ISO 471:1995 Rubber - Temperaures, humidities and times for conditioning and testing
SS-ISO 8756:1997 Air quality - Handling of temperature, pressure and humidity data

Military Standards (MIL-STD)

DOD A-A-51588-1986 WET GLOBE TEMPERATURE KIT (DIAL THERMOMETER TYPE, MECHANICAL)
MIL MIL-C-55076-1963 COMPUTER, HUMIDITY TEMPERATURE CP-223( )/UM (NO S/S DOCUMENT)
MIL MIL-W-36775A-1979 WET BULB-GLOBE TEMPERATURE KIT (SUPERSEDING MIL-W-36775)

German Institute for Standardization

DIN EN 12300:1999 Cryo container – purity for cryogenic operation DIN
DIN 58660:1966 Meteorological instruments - Thermometer 370 for psychrometer
DIN EN ISO 23208:2020-11 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017 + Amd 1:2020); German version EN ISO 23208:2019 + A1:2020
DIN 58661:1966 Meteorological instruments - Thermometer 280 for psychrometer
DIN EN 60068-2-39 E:2013-08 Draft Document - Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 104/609/CDV:2013); German version FprEN 60068-2-39:2013
DIN EN 60068-2-39 E:2013 Draft Document - Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 104/609/CDV:2013); German version FprEN 60068-2-39:2013
DIN EN ISO 23208 E:2018-10 Cleanliness of Cryogenic Vessels for Cryogenic Services (Draft)
DIN EN ISO 23208:2019-08 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)
DIN EN ISO 23208 E:2018 Draft Document - Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017); German and English version prEN ISO 23208:2018
DIN EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998
DIN EN ISO 23208:2018-10 Draft Document - Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017); German and English version prEN ISO 23208:2018
DIN ISO 8756:1996 Air quality - Handling of temperature, pressure and humidity data (ISO 8756:1994)
DIN EN ISO 21028-1 E:2015 Draft Document - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2014); German version prEN ISO 21028-1:2014
DIN EN ISO 21028-1 E:2015-03 Toughness requirements for materials at low temperatures for cryogenic vessels Part 1: Temperatures below -80°C (Draft)
DIN EN ISO 21028-1 E:2024-05 Draft Document - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2024); German and English version prEN ISO 21028-1:2024
DIN EN ISO 21028-1:2017-01 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016); German version EN ISO 21028-1:2016
DIN EN 12429:1998-08 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998

Ente Nazionale Italiano di Unificazione

UNI EN ISO 23208:2020 Cryogenic vessels - Cleanliness for cryogenic service
UNI EN 12300:2009 Cryogenic vessels - Cleanliness for cryogenic service
UNI EN ISO 23208:2019 Cryogenic vessels - Cleanliness for cryogenic service
UNI EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
UNI EN 12429:2000 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions

American Society for Testing and Materials (ASTM)

ASTM E337-84(1996)e1 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-02 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D8042-18 Test Method for Shrinkage Temperature of Wet Blue and Wet White
ASTM E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-15(2023) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D1112-69 Specifications of solid soap for low temperature washing (low and medium temperature)
ASTM D8042-16 Test Method for Shrinkage Temperature of Wet Blue and Wet White
ASTM D8042-18(2023) Test Method for Shrinkage Temperature of Wet Blue and Wet White

ATIS - Alliance for Telecommunications Industry Solutions

0600010-2007 Temperature@ Humidity & Altitude Standards (Pre-Pub)

Standards Norway

NS-EN 12300:1998 Cryogenic vessels — Cleanliness for cryogenic service
NS-EN ISO 23208:2019 Cryogenic vessels — Cleanliness for cryogenic service (ISO 23208:2017)
NS-EN 12429:1998 Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 12268:2015 Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C,...
OS GSO ISO 16544:2016 Thermal insulating products for building applications -- Conditioning to moisture equilibrium under specified temperature and humidity conditions
OS GSO ISO 8756:2008 Air quality-Handling of temperature ,pressure and humidity data

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0468-2-39-2013 Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 104/609/CDV:2013); German version FprEN 60068-2-39:2013
VDE 0468-2-39-2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 60068-2-39:2015); German version EN 60068-2-39:2016

Lithuanian Standards Office

LST EN 12300-2000 Cryogenic vessels - Cleanliness for cryogenic service
LST EN 12300-2000/A1-2006 Cryogenic vessels - Cleanliness for cryogenic service

American Society of Mechanical Engineers (ASME)

ASME B89.6.2-1973(R2017) Temperature and Humidity Environment for Dimensional Measurement
ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement

(U.S.) Telecommunications Industries Association

TIA-455-162-A-1999(2013) FOTP-162 Optical Fiber Cable Temperature Humidity Cycling
TIA-455-162-A-1999 FOTP-162 Optical Fiber Cable Temperature Humidity Cycling

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A110E-2015 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A101-B-1997 Steady-State Temperature Humidity Bias Life Test
JEDEC JESD22-A110C-2009 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110D-2010 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A100C-2007 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A100D-2013 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A101D-2015 Steady-State Temperature-Humidity Bias Life Test

American Association of Textile Chemists and Colorists

AATCC 181-2004 Colorfastness to Light at High Temperatures: Daylight Temperature and Humidity Controlled Apparatus
AATCC 109-2016 Colorfastness to Ozone in the Atmosphere under Low Humidities
AATCC 109-2011 Colorfastness To Ozone In The Atmosphere under Low Humidities
AATCC 109-2002 Colorfastness To Ozone In The Atmosphere under Low Humidities

European Committee for Standardization (CEN)

prEN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028‑1:2024)
prEN ISO 21028-1 rev Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
EN 23270:1991 Paints and Varnishes and Their Raw Materials - Temperatures and Humidities for Conditioning and Testing
EN 1252-2:2001 Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 degrees C and -20 Degrees C

PL-PKN

PN P22147-1970 Leathers Determination of the hygrothermical fastness

Magyar Szabványügyi Testület

MSZ 8878/1-1983 Natural environmental conditions. air temperature and humidity

TIA - Telecommunications Industry Association

EIA-455-162-1989 FOTP-162 Fiber Optic Cable Temperature-Humidity Cycling
TIA/EIA-455-162A-1999 FOTP-162 Fiber Optic Cable Temperature-Humidity Cycling

IN-BIS

IS 12622-1989 Low temperature medical thermometer below normal range - Specification

Indonesia Standards

SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters

International Organization for Standardization (ISO)

ISO 23208:2017/Amd 1:2020 Cryogenic vessels — Cleanliness for cryogenic service — Amendment 1: Cryogenic vessels — Cleanliness for cryogenic service — Amendment 1
ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
ISO 8756:1994 Air quality; handling of temperature, pressure and humidity data

Canadian General Standards Board （CGSB)

CGSB 1.132-M90-CAN/CGSB-1990 Peinture Pour Couche Primaire, Au Chromate De Zinc, A Faible Sensibilite A L'Humidite

Malaysia Standards

MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing

Society of Automotive Engineers (SAE)

SAE ARP866A-1975 Standard Values of Atmospheric Absorption as a Function of Temperature and Humidity
SAE AS3480-1991 NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286
SAE AMS3203-1943 Synthetic Rubber Low Temperature Resistant (45-55) (Polysulfide)
SAE AMS3193D-2011 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193E-2014 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature

VN-TCVN

TCVN 6752-2000 Air quality.Handling of temperature, pressure and humidity data

U.S. Military Regulations and Norms

ARMY MIL-I-3848 A-1963 INDICATOR, PROPELLANT TEMPERATURE, M13, M15 AND M33 (LESS PROPELLANT)
ARMY MIL-I-3848 A NOTICE 1-1997 INDICATOR, PROPELLANT TEMPERATURE, M13, M15 AND M33 (LESS PROPELLANT)

NATO - North Atlantic Treaty Organization

STANAG 2415-1990 Procedures for Operation of Mechanical Ground Equipment to Minimize Diesel Fuel Problems at Low Ambient Temperature (ED 1 AMD 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.na

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability

CZ-CSN

CSN ON 73 5111-1967 Design Value of Relative Humidity and Temperature for Textile Operations

(U.S.) Ford Automotive Standards

FORD FLTM EU-BJ 003-02-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY BROOKFIELD VISCOSIMETER
FORD FLTM BJ 003-2-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY - BROOKFIELD VISCOSIMETER

American Industrial Hygiene Association （AIHA)

ASSE 1062-1997 Temperature Actuated,Flow Reduction Valves for Individual Fixture Fittings
ASSE 1062-2017 Temperature Actuated,Flow Reduction Valves for Individual Fixture Fittings

SCC

AIA NAS698 Nut, Self-Locking, Plate-Corner, Low Height C'Bore, Reduced Rivet Spacing

Others: What is the average soil moisture,How many degrees to store seeds at low temperature,low temperature humidity,Low temperature test humidity,How much low temperature and humidity,Test the humidity of the machine