Cutting-edge testing equipment

Cutting-edge testing equipment, Total:145 items.

The international standard classification for "Cutting-edge testing equipment" includes: Other equipment for the chemical industry , Acoustics and acoustic measurements , Non-destructive testing , Power stations in general , Geology. Meteorology. Hydrology , IT applications in industry .

The Chinese standard classification for "Cutting-edge testing equipment" includes: Special chemical instrument and meter , Nuclear instrument and detector in general , Acoustic instrument and seismograph , X ray, magnetic powder, fluorescent light and other defectoscope , Ultrasonic wave and sound radiation defectoscope , Electric power testing technique , Engineering investigation and geotechnical engineering in general , Laser device , Meteorology , Laboratory instrument and vacuum instrument in general , Oceanographic instrumentation .

National Metrological Verification Regulations of the People's Republic of China

JJG(交通) 015-1999 Verification Regulation of Headlamp for Vehicle Tester's Aligner

Professional Standard - Chemical Industry

HG/T 2382-1992 General Technical Specifications for Rubber Testing Instruments and Equipment

工业和信息化部

HG/T 2382-2022 General technical requirements for rubber testing instrument and equipment

机械工业部

JB/T 7395.2-1994 Electrical measuring instruments terminology Electrical measuring instruments and equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2900.82-2008 Electrotechnical terminology - Nuclear instrumentation - Instruments systems equipment and detectors
GB/T 14480.1-2015 Non-destructive testing instruments―Equipment for eddy current examination―Part 1:Instrument characteristics and verification
GB/T 30150-2013 Radiation Protection Instrumentation - Equipment for Monitoring Airborne Tritium
GB/T 42399.1-2023 Non-destructive testing instruments―Characterization and verification of ultrasonic phased array equipment―Part 1:Instruments
GB/T 32706-2016 Safety requirements for laboratory instrument and equipment-Noise measuring instruments

Professional Standard - Electricity

DL/T 849.3-2019 General technical specification of test instruments used for power equipments Part 3: Route test instrument for power cable
DL/T 1694.2-2017 Calibration specification for high voltage testing instruments Part 2: Power transformer tap-changers tester
DL/T 1694.3-2017 Calibration specification for high voltage testing instruments Part 3: High voltage switch operating characteristics tester
DL/T 849.3-2004 General technical specification of test instruments used for power equipments Part 3: Route test instrument for power cable
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 1694.6-2020 Calibration specification for high voltage testing instruments一Part 6: Very low frequency dielectric loss detector for power cable
DL/T 849.1-2019 General technical specification of test instruments used for power equipments Part 1: Fault flashover test instrument for power cable
DL/T 846.13-2020 General technical specifications for high voltage test equipments -Part 13: Arrester monitor tester
DL/T 1694.5-2017 Calibration suecification for high voltage testing instruments. Part 5: Resistive current testers for zinc oxide surge arrester
DL/T 1681-2016 High voltage test equipment matching guidelines
DL/T 849.1-2004 General technical specification of test instruments used for power equipments Part 1: Fault flashover test instrument for power cable

Group Standards of the People's Republic of China

T/CMA JD006-2019 Calibrators for Headlamp Tester of Motor Vehicle
T/CASME 451-2023 Technical requirements for instrumentation automation measurement and control equipment and systems
T/SXS 133-2023 Specification for the management of measuring instruments and equipment
T/CSAE 1-2016 Water Conservancy and Electric Power Instruments and Equipment Seismic Test Regulations

Professional Standard - Energy

DL/T 1694.8-2021 Calibration specification for high voltage testing instruments -Part 8: Power capacitance and inductance tester
DL/T 1694.9-2021 Calibration specification for high voltage test instruments—Part 9: Power transformer no-load and load loss tester

Professional Standard - Certification and Accreditation

RB/T 227-2023 Domestic testing equipment verification and evaluation guide Hydrogen fuel cell stack test equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34807-2017 General technical specifications for inspection and test of geotechnical engineering instruments&equipment

Professional Standard - Machinery

JB/T 11601-2013 Non-destructive testing instrument － Visual testing Equipment
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
JB/T 6860-1993 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester

Professional Standard - Water Conservancy

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

中国气象局

QX/T 536-2020 Test method for foreword scattering visibility meter

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39555-2020 Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment

Taiwan Provincial Standard of the People's Republic of China

CNS 13802.8-1997 Graphical Symbols for Diagrams (Measuring Instruments,Lamps and Signalling Devices)
CNS 13802-8-1997 Graphical Symbols for Diagrams (Measuring Instruments,Lamps and Signalling Devices)

Professional Standard - Ocean

HY/T 008-2022 Oceanographic instruments and equipments terminology

SCC

MIL MIL-A-53099-1990 ARCTIC FORWARD AREA REFUELING EQUIPMENT (AFARE) (NO S/S DOCUMENT)
CEI IEC 62303:2019 Radiation protection instrumentation - Equipment for monitoring airborne tritium
DANSK DS/EN 17694-1:2023 Hydrometry – Minimum performance requirements and test procedures for water monitoring equipment – Devices for the determination of flow – Part 1: Open channel instrumentation
AENOR UNE 20606-3:1979 Electromechanical components for electronic equipment. Basic testing procedures and measurement methods. Limit current tests.

ESD - ESD ASSOCIATION

TR5.3.2-01-2000 Socket Device Model (SDM) Tester (Formerly TR08-00)

SE-SIS

SIS 15 02 07-1946 Determination of oils and greases, fixed and cutting-edge topics
SIS SS IEC 615:1983 Electronic measuring equipment - Terminology for microwave apparatus
SIS SS IEC 340:1981 Nuclear instrumentation — Test procedures for amplifiers and preamplifiers for semiconductor detectors for ionizing radiation

British Standards Institution (BSI)

BS ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Weave test
BS EN ISO 22232-1:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
BS EN IEC 60645-6:2022 Electroacoustics. Audiometric equipment. Instruments for the measurement of otoacoustic emissions
24/30498528 DC BS EN IEC 61869-22 Instrument Transformers integrated with other devices. Requirements and tests
BS EN ISO 15367-2:2006 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Shack-Hartmann sensors
BS EN ISO 18563-1:2022 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment - Instruments
BS EN 50980-1:2019 Remote alcohol monitoring devices. Test methods and performance requirements - Instruments for assessment programmes
BS EN ISO 15367-2:2005 Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront - Shack-Hartmann sensors
BS EN 60645-6:2010 Electroacoustics. Audiometric equipment. Instruments for the measurement of otoacoustic emissions

Korean Agency for Technology and Standards (KATS)

KS R 5064-2014 Head light testers for autombiles
KS R ISO 13674-1:2015 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS R ISO 13674-1:2005 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS C IEC 62303-2019 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS R ISO 6487:2006 Road vehicles－Techniques of measurement inimpact tests－Instrumentation
KS R ISO 6487:2017 Road vehicles — Techniques of measurement inimpact tests — Instrumentation
KS C IEC 62303:2014 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS C IEC 62303-2014(2019) Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS W 0613-1976(2012) Equipment standard of aircraft instruments and panel
KS R ISO 8721:2008 Road vehicles-Measurement techniques in impact tests-Optical instrumentation
KS R ISO 8721:2014 Road vehicles — Measurement techniques in impact tests — Optical instrumentation
KS C IEC 60736:2003 Testing equipment for electrical energy meters

Spanish Association for Standardization (UNE)

UNE 115-402-1988 Earthquake tester. Methods of measuring machine and equipment dimensions
UNE 53-522-1991 Rubber test mixes. Preparation, mixing and vulcanizatoin. Equipment and procedures
UNE-IEC 60050-394:2009 International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors.
UNE-EN ISO 18674-2:2019 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016)
UNE 135212:1998 EX ROAD MARKING EQUIPMENT. PAINTS. TEST METHODS. DETERMINATION OF SOLID CONTENT. INSTRUMENTAL METHOD.
UNE-IEC 60050-394:2009 ERRATUM:2010 International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors.

AT-ON

ONORM E 1352-1955 Test Equipment. Detector Staubschuβ
ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity
ONORM M 1342-2-1994 Control of measuring and test equipment - Testing Instruction for micrometer depth gauges

Society of Automotive Engineers (SAE)

SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation

International Organization for Standardization (ISO)

ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
ISO 6487:2002 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:2015 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:1987 Road vehicles; Measurement techniques in impact tests; Instrumentation
ISO 6487:2012 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:2000 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 8721:2010 Road vehicles - Measurement techniques in impact tests - Optical instrumentation
ISO 8721:1987 Road vehicles; Measurement techniques in impact tests; Optical instrumentation
ISO 8721:2018 Road vehicles - Measurement techniques in impact tests - Optical instrumentation

HU-MSZT

MNOSZ 15580-1953 Geodesy measuring equipment instrument stand
MNOSZ 11182-1952 Vernier type measuring equipment and measuring instruments for mechanical industry measuring equipment
MSZ 8880/15-1974 Power equipment testing tools and testing methods. Detection of wet edges
MSZ 18222/4-1980 Audiometric instruments and induction equipment for supplementary testing
MSZ 11002/1-1988 Testing process. electric equipment. Inspection of electrical equipment, general regulations for electronic equipment
MSZ 11029/3-1981 electronic product. Electronic equipment testing process. Stress testing of electronic instruments
MSZ 8889/1.lap-1963 Equipment and instruments for climate-related testing. Cold detection
MSZ 8889/2.lap-1963 Equipment and instruments for climate-related testing. Dry heat detection
MSZ 8888/9.lap-1962 Equipment and instruments for climate-related testing. Mildew detection
MNOSZ 10006-1951 Instrument parts. Pre-processed discs

GOSTR

GOST R 59213-2020 Fire equipment. Аirfield fire trucks. General technical requirements. Test methods

Association Francaise de Normalisation

NF P94-505-3*NF EN ISO 18674-3:2017 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3 : measurement of displacements across a line : Inclinometers
NF EN ISO 18674-2:2016 Reconnaissance et essais géotechniques - Surveillance géotechniques par l'instrumentation in situ - Partie 2 : mesurages des déplacements le long d'une ligne : extensomètres
NF EN 1495+A2:2009 Leveling equipment - Work platforms moving along mast(s)
NF EN 14702-3:2019 Characterization of sludge - Sedimentation properties - Part 3: determination of the sedimentation front velocity (ZSV)
NF ISO 38200:2019 Characterization of sludge - Sedimentation properties - Part 3: determination of the sedimentation front velocity (ZSV)
L70-112:1986 Aircraft equipment. On board instrument with round dials for front and rear mounting.
NF C43-803:1993 Power and energy measuring detectors, instruments and equipment for laser radiation.
NF P94-505-2*NF EN ISO 18674-2:2016 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2 : measurement of displacements along a line : extensometers

ESDU - Engineering Sciences Data Unit

ESDU 96032-1996 Wing lift coefficient increment at zero angle of attack due to deployment of leading-edge devices at low speeds.

International Telecommunication Union (ITU)

ITU-T Q.138-1988 Instruments for checking equipment and measuring signals

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 27-1987 Special gauges and test equipment

PL-PKN

PN E90070-1987 Cables for leading out the windings of electric machines and apparatus Requirements and testing
PN T06504-1987 Electronic measuring equipments Electronic stabilized d.c. supply apparatus General requirements and tests

American National Standards Institute （ANSI)

ANSI C57.12.29-1991 Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments

Japanese Industrial Standards Committee (JISC)

JIS W 7002:1981 Environmental conditions and test procedures for airborne equipment and instruments
JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
JIS C 1736-1:2009 Instrument transformers for metering service -- Part 1: General measuring instrument

International Electrotechnical Commission (IEC)

IEC 61151:1992 Nuclear instrumentation; amplifiers and preamplifiers used with detectors of ionizing radiation; test procedures
IEC 62303:2008 Radiation protection instrumentation - Equipment for monitoring of airborne tritium

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4301-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part 1: Test Facility and Instrumentation (RP-824)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1554-2005(R2011) IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std P1554/D15d, Apr 2005 IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE/ANSI C57.12.29-1991 American National Standard for Switchgear and Transformers - Pad-Mounted Equipment- Enclosure Integrity for Coastal Environments
IEEE/ANSI PC57.12.29 American National Standard for Switchgear and Transformers - Pad-Mounted Equipment- Enclosure Integrity for Coastal Environments

GOST

GOST R 60.6.3.27-2023 Robots and robotic devices. Test methods for service mobile robots for work in extreme conditions. Maneuvering. Movement along parallel rails
GOST IEC 60645-6-2017 Electroacoustics. Audiometric equipment. Part 6. Instruments for the measurement of otoacoustic emissions

GSO

GSO ISO 18674-2:2021 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measurement of displacements along a line: Extensometers
BH GSO ISO 18674-2:2022 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measurement of displacements along a line: Extensometers
GSO ISO 9533:2015 Earth-moving machinery -- Machine-mounted audible travel alarms and forward horns -- Test methods and performance criteria
OS GSO 498:1994 Paints and Varnishes - test methods preparation test - paints before coating.paints befor coating.

German Institute for Standardization

DIN 18720:1995 Instrument and tripod connectors on surveying instruments
DIN EN ISO 18674-2:2017-03 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016); German version EN ISO 18674-2:2016
DIN ISO 12858-2 E:2018-01 Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2: Tripods

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4613:2017 Automotive equipment — Brake force measuring instruments
AS/NZS 5761:2011 In-Service Safety Inspections and Tests - Pre-Sale Used Equipment

Indonesia Standards

SNI 09-3762-1995 Symbols for controls, indicators and tell-tales for motor cycles

Danish Standards Foundation

DS 2362-1:1994 Measuring equipment-Inclination measuring instruments-Part 1:Inclination measuring instruments (levels)-Definitions,requirements,testing

RO-ASRO

STAS 10504-1976 MEDICAL APPARATUS, INSTALLATIONS AND EQUIPMENTS Permissible noise levels and methods of test

CZ-CSN

CSN ON 04 4750-1964 Automatic nuclear ejection equipment for casting equipment

Others: Cutting-edge testing equipment,Cutting-edge testing equipment