Cutting-edge testing equipment

Cutting-edge testing equipment, Total:143 items.

The international standard classification for "Cutting-edge testing equipment" includes: Other equipment for the chemical industry , Geology. Meteorology. Hydrology , Acoustics and acoustic measurements , Non-destructive testing , Power stations in general .

The Chinese standard classification for "Cutting-edge testing equipment" includes: Special chemical instrument and meter , Meteorology , Nuclear instrument and detector in general , Acoustic instrument and seismograph , X ray, magnetic powder, fluorescent light and other defectoscope , Engineering investigation and geotechnical engineering in general , Electric power testing technique .

Group Standards of the People's Republic of China

T/SXS 133-2023 Specification for the management of measuring instruments and equipment
T/CQAMSA 0027-2025 Technical regulations for pre-race testing and calibration of intelligent instruments and meters
T/GDAM 002-2022 Calibration of Sliding Resistance Coefficient Tester for Water Conservancy Engineering Test and Inspection Equipment
T/CMA JD006-2019 Calibrators for Headlamp Tester of Motor Vehicle
T/GDAM 001-2022 Calibration of Pull-off Adhesion Tester for Hydraulic Engineering Testing and Inspection Equipment
T/BDT 002-2024 Radio frequency front-end devices and modules test equipment
T/CASME 451-2023 Technical requirements for instrumentation automation measurement and control equipment and systems
T/CSAE 1-2016 Water Conservancy and Electric Power Instruments and Equipment Seismic Test Regulations

National Metrological Verification Regulations of the People's Republic of China

JJG(交通) 015-1999 Verification Regulation of Headlamp for Vehicle Tester's Aligner

Professional Standard - Chemical Industry

HG/T 2382-2022 General technical requirements for rubber testing instrument and equipment
HG/T 2382-1992 General Technical Specifications for Rubber Testing Instruments and Equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2900.82-2008 Electrotechnical terminology - Nuclear instrumentation - Instruments systems equipment and detectors
GB/T 34807-2017 General technical specifications for inspection and test of geotechnical engineering instruments&equipment
GB/T 45955-2025 Performance test methods for meteorological instruments and equipments—Temperature
GB/T 45962-2025 Performance test methods for meteorological instruments and equipments—Atmospheric pressure
GB/T 14480.1-2015 Non-destructive testing instruments―Equipment for eddy current examination―Part 1:Instrument characteristics and verification
GB/T 45956-2025 Performance test methods for meteorological instruments and equipments—Air humidity
GB/T 32706-2016 Safety requirements for laboratory instrument and equipment-Noise measuring instruments
GB/T 30150-2013 Radiation Protection Instrumentation - Equipment for Monitoring Airborne Tritium

Professional Standard - Machinery

JB/T 7395.2-1994 Electrical measuring instruments terminology Electrical measuring instruments and equipment
JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 14626-2024 Laboratory instruments and equipments vocabularyNoise measuring instruments
JB/T 11601-2013 Non-destructive testing instrument － Visual testing Equipment
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester

Professional Standard - Energy

DL/T 1694.10-2024 High voltage test instruments and equipment calibration specifications Part 10: Sulfur hexafluoride density controller calibrator
NB/T 11568.21-2024 Calibration procedures for geotechnical testing instruments and equipment for hydropower projects Part 21: Repose angle measuring instrument
DL/T 1694.11-2024 Specification for calibration of high voltage test instruments and equipment Part 11: Capacitance and current testers

Professional Standard - Energy and Power Planning

DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 1694.8-2021 Calibration specification for high voltage testing instruments -Part 8: Power capacitance and inductance tester
DL/T 1681-2016 High voltage test equipment matching guidelines
DL/T 1694.9-2021 Calibration specification for high voltage test instruments—Part 9: Power transformer no-load and load loss tester
DL/T 849.3-2019 General technical specification of test instruments used for power equipments Part 3: Route test instrument for power cable
DL/T 1694.2-2017 Calibration specification for high voltage testing instruments Part 2: Power transformer tap-changers tester
DL/T 849.1-2004 General technical specification of test instruments used for power equipments Part 1: Fault flashover test instrument for power cable
DL/T 846.13-2020 General technical specifications for high voltage test equipments -Part 13: Arrester monitor tester
DL/T 1694.3-2017 Calibration specification for high voltage testing instruments Part 3: High voltage switch operating characteristics tester
DL/T 849.3-2004 General technical specification of test instruments used for power equipments Part 3: Route test instrument for power cable
DL/T 1694.5-2017 Calibration suecification for high voltage testing instruments. Part 5: Resistive current testers for zinc oxide surge arrester
DL/T 1694.6-2020 Calibration specification for high voltage testing instruments一Part 6: Very low frequency dielectric loss detector for power cable
DL/T 849.1-2019 General technical specification of test instruments used for power equipments Part 1: Fault flashover test instrument for power cable

Professional Standard - Certification and Accreditation

RB/T 227-2023 Domestic testing equipment verification and evaluation guide Hydrogen fuel cell stack test equipment

Professional Standard - Water Conservancy

SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

Professional Standard - Meteorology

QX/T 536-2020 Test method for foreword scattering visibility meter

Professional Standard - Electricity

DL/T 849.3-2019(英文版) General technical requirements for test instruments for power equipment Part 3: Cable routing instrument
DL/T 849.1-2019(英文版) General technical requirements for test instruments for power equipment Part 1: Cable fault flash detector

Taiwan Provincial Standard of the People's Republic of China

CNS 13802.8-1997 Graphical Symbols for Diagrams (Measuring Instruments,Lamps and Signalling Devices)
CNS 13802-8-1997 Graphical Symbols for Diagrams (Measuring Instruments,Lamps and Signalling Devices)

Military Standards (MIL-STD)

MIL MIL-A-53099-1990 ARCTIC FORWARD AREA REFUELING EQUIPMENT (AFARE) (NO S/S DOCUMENT)

Electrostatic Discharge Association (ESDA)

ESD TR5.3.2-01-2000 Socket Device Model (SDM) Tester (Formerly TR08-00)

Ente Nazionale Italiano di Unificazione

UNI EN ISO 18674-3:2020 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
UNI EN ISO 18674-2:2016 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers
UNI EN ISO 15367-2:2005 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors
UNI EN ISO 15367-1:2004 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects

Korean Agency for Technology and Standards (KATS)

KS R 5064-2014 Head light testers for autombiles
KS R ISO 6487:2006 Road vehicles－Techniques of measurement inimpact tests－Instrumentation
KS R ISO 6487:2017 Road vehicles — Techniques of measurement inimpact tests — Instrumentation
KS R ISO 13674-1:2005 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS R ISO 13674-1:2015 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS C IEC 62303:2014 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS R ISO 8721:2008 Road vehicles-Measurement techniques in impact tests-Optical instrumentation
KS R ISO 8721:2014 Road vehicles — Measurement techniques in impact tests — Optical instrumentation
KS C IEC 62303-2019 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS C IEC 62303-2024 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation

Austrian Standards

ONORM E 1352-1955 Test Equipment. Detector Staubschuβ

International Telecommunication Union (ITU)

ITU-T Q.331-1980 Test equipment for checking equipment and signals
ITU-T Q.138-1988 Instruments for checking equipment and measuring signals
ITU-T Q.138-1980 Instruments for checking equipment and measuring signals
ITU-T Q.138-1984 Instruments for checking equipment and measuring signals

British Standards Institution (BSI)

BS ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Weave test
BS EN IEC 60645-6:2022 Electroacoustics. Audiometric equipment. Instruments for the measurement of otoacoustic emissions
BS EN ISO 22232-1:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
BS EN ISO 15367-2:2006 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Shack-Hartmann sensors
24/30498528 DC BS EN IEC 61869-22 Instrument Transformers integrated with other devices. Requirements and tests

Society of Automotive Engineers (SAE)

SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation

Association of German Mechanical Engineers

VDI/VDE/DGQ/DKD 2618 BLATT 16.1-2023 Test Equipment Monitoring - Test Instructions for Vertical Length Measuring Devices
VDI VDE DGQ DKD 2618 Blatt-17-2 E:2019-12 Inspection of measuring and test equipment – Test instruction for length setting instruments
VDI/VDE/DGQ 2618 Blatt 27-1987 Special gauges and test equipment
VDI VDE DGQ DKD 2618 Blatt 17-2-2022 Test instruction for length setting instruments with numeric display
VDI VDE DGQ DKD 2618 Blatt-1-1 E:2020-02 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principles
VDI/DKD 5901 BLATT 3-2025 Calibration of testing and measuring equipment in Automotive Engineering - Headlight Adjustment Test Systems

Engineering Sciences Data Unit (ESDU)

ESDU 96032-1996 Wing lift coefficient increment at zero angle of attack due to deployment of leading-edge devices at low speeds.

Gosstandart of Russia

GOST R 59213-2020 Fire equipment. Аirfield fire trucks. General technical requirements. Test methods
GOST IEC 60645-6-2017 Electroacoustics. Audiometric equipment. Part 6. Instruments for the measurement of otoacoustic emissions
GOST R 60.6.3.27-2023 Robots and robotic devices. Test methods for service mobile robots for work in extreme conditions. Maneuvering. Movement along parallel rails

Spanish Association for Standardization (UNE)

UNE 115-402-1988 Earthquake tester. Methods of measuring machine and equipment dimensions
UNE-EN ISO 18674-2:2019 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016)
UNE-IEC 60050-394:2009 International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors.
UNE-IEC 60050-394:2009 ERRATUM:2010 International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors.

International Organization for Standardization (ISO)

ISO 6487:2002 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
ISO 6487:1987 Road vehicles; Measurement techniques in impact tests; Instrumentation
ISO 6487:2012 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:2015 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:2000 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 8721:2010 Road vehicles - Measurement techniques in impact tests - Optical instrumentation
ISO 8721:1987 Road vehicles; Measurement techniques in impact tests; Optical instrumentation
ISO 8721:2018 Road vehicles - Measurement techniques in impact tests - Optical instrumentation

Association Francaise de Normalisation

NF P94-505-3*NF EN ISO 18674-3:2017 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3 : measurement of displacements across a line : Inclinometers
NF EN ISO 18674-2:2016 Geotechnical reconnaissance and testing - Geotechnical monitoring by in situ instrumentation - Part 2: Measurement of displacements along a line: extensometers

German Institute for Standardization

DIN IEC 1151:1994 Nuclear instrumentation - amplifiers and preamplifiers with detectors for ionizing radiation test procedures
DIN 18720:1995 Instrument and tripod connectors on surveying instruments
DIN 18213:2022-02 Field accuracy test method for GNSS measuring equipment
DIN VDE 0404-3:2005-04 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
DIN IEC 61428:1999 Germanium detector sample container for gamma-ray spectrometer of nuclear instrumentation
DIN EN ISO 18674-2:2017-03 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016); German version EN ISO 18674-2:2016
DIN ISO 6487:1983-02 Road vehicles; techniques of measurement in impact tests; instrumentation

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1554-2005(R2011) IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std P1554/D15d, Apr 2005 IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

Magyar Szabványügyi Testület

MSZ 18222/4-1980 Audiometric instruments and induction equipment for supplementary testing
MNOSZ 15580-1953 Geodesy measuring equipment instrument stand
MSZ 11029/3-1981 electronic product. Electronic equipment testing process. Stress testing of electronic instruments
MNOSZ 11182-1952 Vernier type measuring equipment and measuring instruments for mechanical industry measuring equipment
MSZ 8880/15-1974 Power equipment testing tools and testing methods. Detection of wet edges

American Society for Testing and Materials (ASTM)

ASTM STP 555-1974(1979) Air quality monitoring equipment

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4613:2017 Automotive equipment — Brake force measuring instruments
AS/NZS 5761:2011 In-Service Safety Inspections and Tests - Pre-Sale Used Equipment

Danish Standards Foundation

DS 2362-1:1994 Measuring equipment-Inclination measuring instruments-Part 1:Inclination measuring instruments (levels)-Definitions,requirements,testing

Japanese Industrial Standards Committee (JISC)

JIS C 1736-1:2009 Instrument transformers for metering service -- Part 1: General measuring instrument
JIS W 7002:1981 Environmental conditions and test procedures for airborne equipment and instruments
JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use

GCC Standardization Organization

GSO ISO 18674-2:2021 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measurement of displacements along a line: Extensometers
GSO 290:1994 Instruction manual for appliances ,Instruments and equipment

Swedish Institute for Standards

SIS SS IEC 615:1983 Electronic measuring equipment - Terminology for microwave apparatus
SIS SS IEC 340:1981 Nuclear instrumentation — Test procedures for amplifiers and preamplifiers for semiconductor detectors for ionizing radiation
SS-EN 60645-6:2010 Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
SIS SS IEC 482:1983 Nuclear instrumentation - Dimensions of electronic instrument modules (for nuclear electronic instruments)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems

International Electrotechnical Commission (IEC)

IEC 61151:1992 Nuclear instrumentation; amplifiers and preamplifiers used with detectors of ionizing radiation; test procedures

Comitato Elettrotecnico Italiano

CEI IEC 62303:2019 Radiation protection instrumentation - Equipment for monitoring airborne tritium

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 18674-2:2022 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measurement of displacements along a line: Extensometers

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4301-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part 1: Test Facility and Instrumentation (RP-824)

Polski Komitet Normalizacyjny (PKN)

PN E90070-1987 Cables for leading out the windings of electric machines and apparatus Requirements and testing

American National Standards Institute （ANSI)

ANSI C57.12.29-1991 Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments
ANSI/ISO 2690:1997 Unrecorded Magnetic Tapes for Instrumentation Applications - Physical Properties and Test Methods