standard dilution assay

standard dilution assay, Total:186 items.

The international standard classification for "standard dilution assay" includes: Solvents , Paints and varnishes , Sterilization and disinfection , Radiation measurements , Medical Sciences and health care facilities in general .

The Chinese standard classification for "standard dilution assay" includes: Coating auxiliary materials , Basic standard and general method for coating , , Ionizating Radiation Measurement , Vacuum grease and anti-rust grease , Sanitation in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents
GB/T 1753-1979 Method of test for evaporation rate of thinners and anti-blushing agents
GB/T 1721-2008 Determination of appearance and transparency of varnishes boiled oils and thinners
GB/T 1722-1992 of colour of varnishes, boiled oils and thinners
GB/T 1752-1979 Method for blushing test of thinners and anti-blushing agents
GB/T 1751-1992 Determination of water of thinners and retarders
GB/T 1721-1979 Methods of test for appearance and transparency of varnishes, boiled oils and thinners

Professional Standard - Chemical Industry

HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents
HG/T 3860-2006 Method of test for evaporation rate of thinners and anti - Blushing agents
HG/T 3858-2006 Determination of water of thinners and retarders
HG/T 3859-2006 Method for blushing test of thinners and anti - Blushing agents

卫生健康委员会

WS/T 798-2022 Qualitative testing standard on disinfection effect of disinfectant——use dilution method

Professional Standard - Environmental Protection

HJ 505-2009 Water Quality - Determination of Biochemical Oxygen Demand after 5 Days (BOD5) for Dilution and Seeding Method
HJ 1182-2021 Water quality—Determination of colority—Dilution level method

Professional Standard - Agriculture

JJF 2109-2024 Technical Requirements for Reference Material Characterization―Organic Isotope Dilution Mass Spectrometry

National Metrological Technical Specifications of the People's Republic of China

JJF 2066-2023 Calibration Specification for Aerosol Diluters
JJF 1267-2010 Primary method of isotope dilution mass spectrometry

Professional Standard - Urban Construction

CJ 26.4-1991 Municipal sewage water quality inspection method standard Five-day determination of biochemical oxygen demand Dilution and inoculation method
CJ/T 3018.2-1993 Leachate -- determination of colority -- multiple dilution method

Professional Standard - Petrochemical Industry

SH/T 0105-1992 Determination of oil film thickness of solvent cutback rust preventive oil

Professional Standard - Hygiene

WS/T 411-2024 Standards for antifungal susceptibility testing of filamentous fungi Broth dilution method
WS/T 421-2024 Standards for antifungal susceptibility testing of yeasts-Broth dilution method

Taiwan Provincial Standard of the People's Republic of China

CNS 886-1986 Method of Test for Lacquer Thinner

Korean Agency for Technology and Standards (KATS)

KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5554-1984 Standard Test Method for Acidity in solvent, Thinner for lacquer
KS M 2110-2011 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
KS M 2110-1986 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
KS M 5553-1984 Test methods for ester keton contents of Thinner for lacquer
KS M 5552-1984 METHOD FOR DETERMINING MOISTURE by Test method of turbidity for solvent and thinner
KS I 2207-2014 Testing methods for determination of trace components in diluent gas and zero gas
KS M 5453-1984 Determination of flash point - varnish and VERSATILE Thinner (tag closed)

American Society for Testing and Materials (ASTM)

ASTM D5062-09 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM D5062-96(2001) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM D1617-90(2001) Standard Test Method for Ester Value of Solvents and Thinners
ASTM D5062-09(2020) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM D1617-90(1996) Standard Test Method for Ester Value of Solvents and Thinners
ASTM D5062-96 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM D5062-09(2017) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D402/D402M-24 Standard Test Method for Distillation of Cutback Asphalt
ASTM E2515-09 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM D3143-08 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM E741-00(2006)e1 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D1296-01(2007) Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D1296-01 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E741-23 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D1617-22 Standard Test Method for Ester Value of Solvents and Thinners
ASTM D402-08 Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
ASTM D402/D402M-14 Standard Test Method for Distillation of Cutback Asphalt
ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D7593-13 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM D3143-98 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus (Withdrawn 2007)
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM D7593-22 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM D1617-07(2012) Standard Test Method for Ester Value of Solvents and Thinners
ASTM C1380-04 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM D1617-07 Standard Test Method for Ester Value of Solvents and Thinners
ASTM D322-97(2012)e1 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting
ASTM C1380-97 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E741-11(2017) Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2003) Standard Specification for Pipet, Blood Diluting
ASTM D322-97(2012) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
ASTM D3616-95(2014) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
ASTM D402-97 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
ASTM E788-97(2019) Standard Specification for Pipet, Blood Diluting
ASTM D7593-14 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM D2028-97 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97 Standard Specification for Pipet, Blood Diluting
ASTM D2028-97(2004) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D3946-92(1997) Standard Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metalworking Fluids
ASTM E741-00(2006) Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM D402-02 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
ASTM D2027/D2027M-19(2024) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D3525-93(1997) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D1296-23 Standard Test Method for Odor of Volatile Solvents and Diluents
ASTM D3143/D3143M-13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D2399-12 Standard Practice for Selection of Cutback Asphalts
ASTM D3525-04(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM C1380-04(2011) Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM D3525-04 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D2399-21 Standard Practice for Selection of Cutback Asphalts
ASTM D1720-96(2000) Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
ASTM D1720-96 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
ASTM D5969-11e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D3525-04(2010) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D5969-05 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D2028/D2028M-15 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D5969-05e2 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-02 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-05e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D5969-96 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
ASTM D2026/D2026M-15 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2028/D2028M-15(2021)e1 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D3524-14 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM D3524-04 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM C1844-16 Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution
ASTM D4627-92(1997) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids
ASTM D1243-15 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
ASTM D1243-14 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

GSO

GSO ASTM D61:2009 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

Association Francaise de Normalisation

NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.

TR-TSE

TS 122-1978 STANDARD METHOD OF DISTILLATION TEST FOR CUT-BACK ASPHALTIC PRODUCTS

AASHTO - American Association of State Highway and Transportation Officials

T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
T 78-2005 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
T 78-2014 Standard Method of Test for Distillation of Cutback Asphalt Products
M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)
M82-1975 Standard Specification for Cut-Back Asphalt (Medium-Curing Type)
M 81-1992 Standard Specification for Cut-Back Asphalt (Rapid-Curing Type)
T78-1996 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products (Twentieth Edition; ASTM D402-94)

The American Road & Transportation Builders Association

AASHTO T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
AASHTO T 78-2014 Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2015 Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2015(R2019) Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO M 82-2017 Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 81-92(R2017) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
AASHTO M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 81-1992 Standard Specification for Cutback Asphalt (Rapid-Curing Type)

BR-ABNT

ABNT NBR 5765-2012 Diluted asphalt — Determinations of flashpoint — Tag open cup

SCC

AASHTO T 78-2015(2019) Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO T 78-2022 Standard Method of Test for Distillation of Cutback Asphalt Products
AASHTO M 82-1975(2012) Standard Specification for Cutback Asphalt (Medium-Curing Type)
BS 4453:1969 Method for the determination of distillation of cutback bitumen and road oil
AASHTO M 82-2017(2021) Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO T 78-2005 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products (ASTM Designation: D402-02)
AASHTO M 81-1992(2021) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
NS-EN 15626:2016 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
AENOR UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesion of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE-EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
DANSK DS/EN 15626:2016 Bitumen and bituminous binders – Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test – Aggregate method

RU-GOST R

GOST 11034-1982 Polyamides. Method for determination of the viscosity number of dilute solution
GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions
GOST 18249-1972 Plastics. Method for viscosity determination of diluted polymer solution
GOST 32057-2013 Cutback bituminous products. Determination of distillation characteristics

(U.S.) Ford Automotive Standards

FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)
FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
FORD M14J147-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100A)
FORD WSS-M14J521-A2-1998 PURGE THINNER (Shown on WSS-M14J521-A1)
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
FORD M14J136-A-1991 ALIPHATIC HYDROCARBON THINNERS Shown on M14J100-A
FORD M14J208-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J167-A-1991 ALIPHATIC HYDROCARBON THINNERS Shown on M14J100-A
FORD M14J148-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100-A)
FORD M14J217-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J220-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J242-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J210-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)
FORD M14J245-1991 AROMATIC HYDROCARBON THINNERS (Shown on M14J200-A SEE SCOPE)

YU-JUS

JUS H.P8.514-1986 Testing of pesticide?. Dilution stability

United States Navy

NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE

IN-BIS

IS 9163 Pt.1-1979 Determination of Steady Flow by Dilution Method Part Ⅰ Constant Speed Injection Method

CH-SNV

SEV 3064-1965 dilution. quality regulations

Standard Association of Australia （SAA）

AS 3778.5.2:1991 Measurement of water flow in open channels - Dilution methods - Integration method for the measurement of steady flow
AS 3778.5.1:1991 Measurement of water flow in open channels - Dilution methods - Constant-rate injection method for the measurement of steady flow

SE-SIS

SIS SS 02 81 43-1990 Determination of biochemicaloxygen demand, BODi of waste water — Dilution method

VE-FONDONORMA

COVENIN 676-1974 Measurement of pH value in the Venezuelan standard for diluted pigments
COVENIN 679-1974 Measurement of pH value in the Venezuelan standard for diluted pigments
COVENIN 690-1974 Measurement of drying time in the Venezuelan standard for diluted pigments

TH-TISI

TIS 2489.1-2010 Standard test method for thinner.part 1: sayboltcolor

ES-AENOR

UNE 80-262-1987 Chemical analysis and test methods of cement: determination of fly ash content (by means of selective dilution method) (standard method)

CZ-CSN

CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution

RO-ASRO

STAS 8972/3-1981 Hydrometry DILUTION METHOD FOR MEASUREMENT OF STEADY WATER FLOW Constant-rate injection method

CU-NC

NC 26-150-1986 Veterinary Drugs Glyoerate Diluent Teatine Methods

FI-SFS

SFS 3019-1979 Determine the biochemical oxygen demand in water. dilution method

ES-UNE

UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method

British Standards Institution (BSI)

BS EN 15626:2016 Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method

German Institute for Standardization

DIN EN 15626:2016-09 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method; German version EN 15626:2016