Plastic Testing Instruments

Plastic Testing Instruments, Total:149 items.

The international standard classification for "Plastic Testing Instruments" includes: Plastics in general , Rubber and plastics products .

The Chinese standard classification for "Plastic Testing Instruments" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44559.1-2024 Plastics—Determination of puncture impact behaviour of rigid plastics—Part 1: Non-instrumented impact testing
GB/T 1043.1-2008 Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test

Taiwan Provincial Standard of the People's Republic of China

CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)
CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test

Korean Agency for Technology and Standards (KATS)

KS B 5552-2019 Impact testing machines for plastic materials－Instrumentation
KS M ISO 6603-2:2002 Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M ISO 6603-2-2002(2022) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M ISO 6603-2-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS M ISO 6603-1-2002(2022) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 1：Non-instrumented impact testing
KS M ISO 6603-1-2023 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
KS M ISO 6603-2-2023 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
KS M ISO 6603-1-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 1：Non-instrumented impact testing
KS B 5552-2004(2019) Impact testing machines for plastic matelials－Instrumentation
KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M 3088-2009 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-2-2023 Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M 3088-1994 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
KS M 3088-2013 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS M ISO 7765-2:2002 Plastics film and sheeting－Determination of impact resistance by the free－falling dart method－Part 2：Instrumented puncture test
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M ISO 13468-2-2007(2017) Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS M ISO 11443:2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS M ISO 11443:2007 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS M ISO 13468-1-2007(2022) Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument

SCC

BS EN ISO 6603-2:1997 Plastics. Determination of multi-axial impact behaviour of rigid plastics-Instrumented puncture test
BS PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
DANSK DS/EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DANSK DS/EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test
NS 4000:1967 Pressure test of plastic bags by the use of the EPPT-tester
BS EN ISO 179-1:1999 Plastics. Determination of Charpy impact properties-Non-instrumented impact test
DANSK DS/ISO 4787:2021 Laboratory glass and plastic ware – Volumetric instruments – Methods for testing of capacity and for use
NS-EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)
NS-EN ISO 6603-1:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing (ISO 6603-1:2000)
AENOR UNE-EN ISO 6603-2:2001 Plastics - Determination of puncture impact behavior of rigid plastics - Part 2: Instrumented puncture test. (ISO 6603-2:2000)
BS ISO 13468-2:1999 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
NS-EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
DANSK DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DIN EN ISO 6603-2 E:2022 Draft Document - Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO/DIS 6603-2:2022); German and English version prEN ISO 6603-2:2022
DIN ISO 9370 E:2018 Draft Document - Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method (ISO 9370:2017); Text in German and English
DANSK DS/ISO 13468-2:2021 Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument

British Standards Institution (BSI)

PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing
BS EN ISO 6603-2:2000(2002) Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2 : Instrumented puncture testing
ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics. - Part 2: Instrumented impact testing
BS EN ISO 6603-1:2000 Plastics - Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing
BS EN ISO 179-2:1999+A1:2012 Plastics. Determination of Charpy impact properties. Instrumented impact test
BS EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Instrumented impact test
ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
22/30430494 DC BS EN ISO 6603-2. Plastics. Determination of puncture impact behaviour of rigid plastics. Part 2. Instrumented impact testing
BS EN ISO 13468-1:2019 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS ISO 9370:2017 Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
BS EN ISO 4787:2021 Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use
18/30377401 DC BS EN ISO 179-2. Plastics. Determination of Charpy impact properties. Part 2. Instrumented impact test
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)

Military Standards (MIL-STD)

DOD A-A-53787-1988 COLLECTING TUBING SET, UTERINE, PLASTIC, DISPOSABLE
DOD A-A-54397-1991 TIP, DENTAL SUCTION APPARATUS, PLASTIC

Japanese Industrial Standards Committee (JISC)

JIS K 7211-2:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
JIS K 7211-1:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
JIS K 7129:1992 Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method)
JIS B 7756:1993 Impact testing machines for plastic materials -- Instrumentation
JIS K 7363:1999 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
JIS K 7111-1:2006 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS K 7111-2:2006 Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test

International Organization for Standardization (ISO)

ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 179-2:1997 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
ISO 179-1:2000 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 9370:2009 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
ISO 9370:1997 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
ISO 9370:2017 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
ISO 13468-1:2019 Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument

Dansk Standard

DANSK DS/ISO 6603-2:2023 Plastics – Determination of puncture impact behaviour of rigid plastics – Part 2: Instrumented impact testing
DANSK DS/ISO 179-1:2023 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact test

German Institute for Standardization

DIN EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000
DIN EN ISO 6603-2:2002-04 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 / Note: To be replaced by DIN EN ISO 6603-2 (2022-05).
DIN EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)
DIN 12254:1980 Plastics laboratory ware; stoppers
DIN EN ISO 179-1:2006 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005
DIN EN ISO 6603-2:2023-11 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023); German version EN ISO 6603-2:2023
DIN EN ISO 6603-1:2000-10 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999
DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing
DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
DIN EN ISO 4787:2022-03 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021); German version EN ISO 4787:2021
DIN EN ISO 179-1 E:2008-08 Determination of Charpy Impact Properties of Plastics Part 1: Non-Instrumental Impact Test (Draft)
DIN EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/DIS 4787:2021); German and English version prEN ISO 4787:2021
DIN EN ISO 13468-1:2019-10 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019); German version EN ISO 13468-1:2019

PL-PKN

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus

GSO

BH GSO ISO 6603-1:2016 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
OS GSO ISO 6603-2:2013 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
GSO ISO 6706:2007 Plastics laboratory ware – Graduated measuring cylinders
OS GSO ISO 179-1:2015 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
BH GSO ISO 179-1:2016 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test

American National Standards Institute （ANSI)

BS EN ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics Instrumented impact testing (British Standard)
BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)

Danish Standards Foundation

DS/EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DS/EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test

Indonesia Standards

SNI ISO 6603-1:2011 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
SNI ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
SNI ISO 6603-2:2014 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing

Association Francaise de Normalisation

NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF EN ISO 6603-1:2000 Plastics - Determination of the behavior of perforated rigid plastics under the effect of an impact - Part 1: non-instrumented impact tests
NF EN ISO 4787:2021 Laboratory glassware and plastic equipment - Volumetric instruments - Methods of testing capacity and use
NF T51-035-2:1999 Plastics. Determination of Charpy impact properties. Part 2 : instrumented impact test.
NF T51-065-1*NF EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1 : single-beam instrument

NO-SN

NS 4000-1967 Pressure test of plastic bags by the use of the EPPT-tester

European Committee for Standardization (CEN)

EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)
EN ISO 6603-1:1996 Plastics - Determination of Multi-Axial Impact Behaviour of Rigid Plastics - Part 1: Falling Dart Method
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
FprEN ISO 6603-2 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO/FDIS 6603-2:2023)
EN ISO 6603-1:2000 Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing ISO 6603-1:2000
FprEN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/FDIS 4787:2021)

Spanish Association for Standardization (UNE)

UNE-EN ISO 6603-2:2024 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN ISO 6603-1:2001 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing. (ISO 6603-1:2000)
UNE-EN ISO 179-2:2000 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 2: INSTRUMENTED IMPACT TEST (ISO 179-2:1997)
UNE-EN ISO 13468-2:2022 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
UNE-EN ISO 13468-1:2020 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)

Lithuanian Standards Office

LST EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
LST EN ISO 6603-1:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)

American Society for Testing and Materials (ASTM)

ASTM D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM RR-D20-2005 2023 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-D20-1124 1985 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-D20-2000 2020 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

AT-ON

ONORM A 5493-1982 Packaging testing; drop test on plastic Containers
OENORM EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/DIS 4787:2021)

The American Road & Transportation Builders Association

AASHTO T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus

KR-KS

KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

RU-GOST R

GOST 34163.2-2017 Plastics. Determination of puncture impact behaviour of rigid. Plastics. Part 2. Instrumented method

GM North America

GM GM9300P-2001 Impact Test for Plastic Materials (Instrumented or Non-Instrumented)

AASHTO - American Association of State Highway and Transportation Officials

T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

Others: test instrument,instrument test,Plastic Testing Standards,Plastic Testing Instruments,Plastic Testing Equipment,Plastic Viscosity Test,Plastic Tensile Testing,plastic test,Plastic Testing Instruments,Plastic toughness test,plastic test,Plastic Fatigue Testing,plastic test toughness,plastic instrument,plastic instrument case,plastic instrument case,Plastic Testing Testing Plastics,plastic instrument,instrument test