Styrene Mass Spectrometry

Styrene Mass Spectrometry, Total:160 items.

The international standard classification for "Styrene Mass Spectrometry" includes: Raw materials for rubber and plastics , Ambient atmospheres , Tobacco, tobacco products and related equipment , Plastics , Adhesives , Surface active agents , Thermoplastic materials , Aromatic hydrocarbons , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Styrene Mass Spectrometry" includes: Synthetic resin and plastic , Analysis methods for toxic substances in atmosphere , Tobacco , Basic standards and general methods for synthetic resin and plastic , Adhesives , Basic standards and general methods for chemical additive , Basic organic chemicals , Basic Subject in general , Labor sanitation , Papermaking in general .

Professional Standard - Commodity Inspection

SN/T 2889-2011 Food contact materials for export. Polymers. Determination of toluene|| ethylbenzene|| propylbenzene|| isopropylbenzene|| styrene and total volatile substances in polystyrene. Gas chromatography method
SN/T 3525-2013 Determination of styrene in adhesives used in buiding for import and export-Gas chromatography-mass spectrometry

国家质量监督检验检疫总局

SN/T 4673-2016 Determination of ethephon,thidiazuron,diuron pesticides residues in cotton for import and export―Liquid chromatography-tandem mass spectrometry method
SN/T 4156-2015 Determination of divinyl benzene in the imported and exported polystyrene poke-Gas chromatography-mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14670-1993 Air quality－Determination of styrene－Gas chromatography
GB/T 3915-2011 Styrene for industrial use
GB/T 23972-2009 Determination of alkylphenols and alkylphenol polyethoxylates in textile dyeing and finishing auxiliaries—LC/MS method
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB/T 9353-1988 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-Butadiene-Styrene resins by gas chromatography
GB 12671-1990 Polystyrene resin
GB/T 27524-2011 Cigarettes - Determination of semi-volatile compounds(pyridine, styrene, quinoline) in mainstream smoke - GC-MS method
GB/T 14677-1993 Air quality. Determination of toluene, dimethyl benzene and styrene. Gas chromatography
GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives

Professional Standard - Agriculture

SN/T 5520-2023 Determination of phenylethanol amine A residues in foodstuffs for animalorigin-Liquid chromatography tandem mass spectrometry method
GB/T 43778-2024 Determination of styrene and 2-chloroethanol in cell culture medium—Gas chromatography-mass spectrometry (GC-MS）

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.68-2017 Determination of toxic substances in workplace air—Part 68: Styrene, methylstyrene and divinyl benzene

Group Standards of the People's Republic of China

T/ZZB 2752-2022 Styrene for polymerization-specificatioan
T/GDFDTAEC 04-2022 Determination of Divinylbenzene residue in Plant extract Gas chromatography-Mass spectrometr
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/SDAS 791-2024 Recycling styrene
T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam
T/NAIA 0273-2023 divinylbenzene

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39998-2021 Paper, board and paper products—Determination of alkylphenol polyethoxylates—HPLC-MS method
GB/T 3915-2021 Styrene for industrial use
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography

Professional Standard - Petrochemical Industry

SH 1590-1994 Anti-impact resin of styrene-butadiene series
SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
SH/T 1840-2023 Determination of the content of polycyclic aromatic hydrocarbons in oil-extended styrene-butadiene rubber（SBR）— Gas chromatography-mass spectrum method
SH/T 1628.7-2023 Vinyl acetate for industrial use – Part 7：Determination of trace benzene series– Gas chromatography–mass spectrometry method

工业和信息化部

HG/T 4999-2016 Tristyrylphenol ethoxylates

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1013-2014 Determination of Phenylethanolamine A in Urine by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry

Military Standard of the People's Republic of China-General Armament Department

GJB/J 5126-2002 Specification for polystyrene particle size reference materials

Professional Standard - Chemical Industry

HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)

Taiwan Provincial Standard of the People's Republic of China

CNS 3637-1980 Phenyl Ethylene (Styrene) Monomer
CNS 11285-1985 Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics

Hebei Provincial Standard of the People's Republic of China

DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

American Society for Testing and Materials (ASTM)

ASTM UOP913-92 Impurities in Styrene by Gas Chromatography
ASTM D4225-97 Standard Specification for Styrene-Butadiene Sheeting
ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM UOP1015-17 Determination of Trace Oxygenates in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry

RU-GOST R

GOST 15820-1982 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities
GOST 10003-1990 Styrene. Specifications
GOST 23492-1983 Synthetic rubbers, butadiene-styrene SKS-30ARKPN and butadiene-methylstyrene SKMS-30ARKPN. Specifications

International Organization for Standardization (ISO)

ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO/PRF 3136 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO 3136:2023 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

GSO

GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 3136:2015 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio

Korean Agency for Technology and Standards (KATS)

KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M 3349-2011 Styrene
KS M 3349-2016 Styrene
KS M 3349-1981 Styrene
KS M 3349-2021 Styrene
KS M 3203-1976 POLYSTYRENE SHEETS
KS M 3203-2003 POLYSTYRENE SHEETS
KS M ISO 3136-2019 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3203-1997 POLYSTYRENE SHEETS
KS M ISO 3136:2009 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3203-2004 POLYSTYRENE SHEETS

KR-KS

KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS F 4734-2022 Expanded polystyrene lightweight concrete panel for wall

SCC

BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
IEC 60275:1968 Polystyrene film dielectric capacitors
NS 1641:1969 Fish boxes made of expanded polystyrene - Quality requirements
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 1854-2009 EXPANDED POLYSTYRENE

British Standards Institution (BSI)

BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications

Japanese Industrial Standards Committee (JISC)

JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6727:1977 Styrene
JIS K 6727-1:2012 Styrene.Part 1: Quality and marking
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6872:1995 Polystyrene sheets

IN-BIS

IS 4105-1988 Styrene (vinylbenzene) specifications
IS 3928-1986 Specification for styryl acetate

Spanish Association for Standardization (UNE)

UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

TR-TSE

TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY
TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
TS 3247-1978 Sanayide Kullan?lan Stiren

PL-PKN

PN C89068-1961 Polystyrene. Deferminafion of ?he S?yrene-con?en?s
PN BN 6113-26-1966 Styrene primer

Standard Association of Australia （SAA）

AS 2508.3.012:1982 Safe storage and handling information card - Styrene (vinyl benzene, styrene monomer)

United States Navy

NAVY MIL-S-14195 A REINST NOTICE 2-1990 STYRENE MONOMER
NAVY MIL-S-14195 A-1970 STYRENE MONOMER
NAVY MIL-S-14195 A NOTICE 4-2003 STYRENE MONOMER

Association Francaise de Normalisation

NF T51-901:1981 Plastics. Determination of residual styrene monomer in polystyrene by gas chromatography.
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification

CZ-CSN

CSN 64 3002-1979 Impact resistant polystyrenes Standards of quality
CSN 64 3001-1979 Standard polystyrenem Standards oí quality
CSN 35 8325-1975 Polystyrene film dielectric capaoitors

SE-SIS

SIS SS-ISO 2561:1987 Plastics - Determination of residual styrene monomer in polystyrene by gas chromatography

RO-ASRO

STAS 7862-1980 POLYSTYRENE
STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS 12207-1984 TECHNICAL STYRENE
STAS 7459/2-1974 Rubbcrs RAW BUTADIENE-STYRENE RUBBER Detcrmination of bound a-methyl styrene monomer content
STAS 8365/2-1990 Rubber. Test recipe for butadiene-styrene and butadiene-alphamethyil styrene rubbers testing

US-FCR

FCR VA 07 52 16-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, HOT-APPLIED
FCR VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED

US-VA

VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED

AR-IRAM

IRAM 1049-N.I.O.-1949 Styrene resin
IRAM 13 310-1962 Determination of soluble styrene content in polystyrene

IL-SII

S.I.533-1967 POLYSTYRENE SHEETS

NO-SN

NS 1641-1969 Fish boxes made of expanded polystyrene - Quality requirements

GM Europe

GME QK 000753-1998 Modified thermoplastic elastomer materials based on styrene-ethylene/butylene-styrene. English/German
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

European Committee for Standardization (CEN)

EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997

German Institute for Standardization

DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Danish Standards Foundation

DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

GOSTR

GOST 23492-2019 Butadiene-methylstyrene SKMS-30ARKPN and butadiene-styrene SKS-30ARKPN rubbers. Specifications

GM North America

GM 9985206-1980 Adhesive - Styrene