Plastic materials and products

Plastic materials and products, Total:419 items.

The international standard classification for "Plastic materials and products" includes: Thermoplastic materials , Plastics , Environmental testing , Raw materials for rubber and plastics in general , Films and sheets , Plastics pipes , IT applications in transport and trade , Toys , Environmental economics , Furniture , Test conditions and procedures in general , Construction materials in general .

The Chinese standard classification for "Plastic materials and products" includes: Basic standards and general methods for synthetic resin and plastic , Environmental Condition and General Test Method , Synthetic resin and plastic , Plastic profile , Hygiene, safety and labor protection , Commerce, Trade and Contract , Toys , Basic standards and general methods , Furniture in general , Police-used device and tool , Building materials products in general , Non-metal chemical machinery equipment , Electrical carbon product .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44570-2024 Plastics—Polycarbonate sheets
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 22271.3-2016 Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 3: Requirements for general materials
GB/T 14522-1993 Accelerated weathering test method for plastics,coatings and rubber materials used for machinery industrial products
GB 4806.7-2016 National Food Safety Standard - Food Contact Plastic Materials and Articles
GB/T 1844.2-1995 Symbols of plastics and resins―Part 2: Fillers and reinforcing materials
GB 31604.27-2016 National Food Safety Standard - Food Contact Materials and Articles -Determination of Ethylene Oxide and Propylene Oxide in Plastics
GB/T 29418-2012 Test methods for mechanical and physical properties of wood-plastic composite product
GB/T 14572-1993 Rules for inspecting, marking, packing, storing and transporting of thermoplastic materials
GB/T 19278-2003 General terms and their definitions of thermoplastic pipes,fittings and valves

Shanghai Provincial Standard of the People's Republic of China

DB31/T 478.19-2014 Water quotas for major industrial products and their calculation methods Part 19: Plastic products (plastic particles, plastic products)

Professional Standard - Agriculture

GB 4806.7-2023 National food safety standard - Plastic materials and products for food contact
17药典三部-2020 General principles of biological products Quality control of raw materials and excipients used in the production of biological products
17药典三部-2015 General rules for biological products Quality control procedures for raw materials and excipients used in the production of biological products

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36602-2018 Information description of product for electronic commerce transaction—Plastic materials
GB/T 40182-2021 Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth
GB/T 40904-2021 Methods for the determination of prohibited substances in furniture products and related materials—Azo dyes
GB/T 40906-2021 Methods for the determination of prohibited substances in furniture products and related materials—Certain phthalate esters
GB/T 37866-2019 Green product assessment—Plastic products

Professional Standard - Public Safety Standards

GA/T 950-2019 V50 test methods for ballistic materials and products
GA 950-2011 V50 test method for ballistic materials and products

国家质量监督检验检疫总局

SN/T 2822-2011 Food Contact Materials for Export - Polymers - Determination of Temperature of Plastics Materials and Articlse at the Plastics/Food Interface During Microwave and Conventional Oven Heating

Group Standards of the People's Republic of China

T/QGCML 2185-2023 Plastic products polypropylene (PP) extruded sheets
T/SDCIAS 004-2022 Coatings, inks, adhesives, pigments and similar products
T/QGCML 4668-2024 PC plastic alloy material
T/SDAQI 078-2023 Food packaging plastic materials and products—Determination of migration of 1-Hexene—Headspace gas chromatography method
T/SAFCM 044-2024 Sanitary specifications for the production of coffee grounds for food contact materials and products
T/CNLIC 0055-2022 Technical specification for green-design product assessment — Plastic profiles for doors and windows
T/GDBZ 005-2020 Determination of migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in food contact plastic materials and products
T/HZBX 030-2020 Manage specification for food packaging containers and articles product factory
T/CSRA 24-2024 Requirements for Traceability of Plastic Recycling and Regeneration and Recycled Plastic Content in Plastic Products? Part 1: Post-Consumer Recycled Plastics
T/CASTENG 015-2023 Specification for carbon footprint evaluation of plastic injection molding products
T/GDBZ 004-2020 Determination of migration of isophthalic acid in plastic materials and products used in food contact
T/CITS 0005-2021 Determination of bisphenol compounds in plastic materials and products contacted with food-Ultra performance convergence chromatography
T/WJGY 015-2023 Carbon footprint assessment and carbon labeling of plastic pipeline products
T/TJWL 003-2018 Plastic soft package for food cold chain
T/CITS 0006-2021 Determination of ultraviolet absorbents in plastic materials and products contacted with food-Ultra performance convergence chromatography
T/SDAQI 080-2023 Food packaging plastic materials and products—Determination of migration of isophthalic acid—High-performance liquid chromatography

Taiwan Provincial Standard of the People's Republic of China

CNS 7161-1982 Propylene Plastic Molding and Extrusion Materials

Hebei Provincial Standard of the People's Republic of China

DB13/T 1081.9-2009 Determination of specific migration of vinyl acetate in food packaging materials and products
DB13/T 1081.12-2009 Plastics for food packaging materials and products - Part 12: Determination of specific migration of m-xylylenediamine
DB13/T 1081.10-2009 Plastics for food packaging materials and products - Part 10: Determination of specific migration of acrylamide
DB13/T 1081.8-2009 Plastics for food packaging materials and products - Part 8: Determination of isocyanate content
DB13/T 1081.4-2009 Plastics for food packaging materials and products - Part 4: Determination of 1,3-butadiene content
DB13/T 1081.2-2009 Plastics for food packaging materials and products - Part 2: Determination of specific migration of terephthalic acid
DB13/T 1081.15-2009 Plastics for food packaging materials and products - Part 15: Determination of specific migration of 1,3-butadiene
DB13/T 1081.3-2009 Plastics for food packaging materials and products - Part 3: Determination of specific migration of acrylonitrile
DB13/T 1081.23-2009 Plastics for food packaging materials and products - Part 23: Determination of specific migration of formaldehyde and hexamethylenetetramine
DB13/T 1081.13-2009 Plastics for food packaging materials and products - Part 13: Determination of specific migration of bisphenol A
DB13/T 1081.20-2009 Plastics for food packaging materials and products - Part 20: Determination of epichlorohydrin content
DB13/T 1081.17-2009 Food packaging materials and plastic products - Part 17: Determination of carbonyl chloride content
DB13/T 1081.6-2009 Food packaging materials and plastic products - Part 6: Determination of vinylidene chloride content
DB13/T 1081.5-2009 Plastics for food packaging materials and products - Part 5: Determination of specific migration of vinylidene chloride
DB13/T 1081.16-2009 Plastics for food packaging materials and products - Part 16: Determination of specific migration of caprolactam and caprolactam salts

Professional Standard - Environmental Protection

HJ/T 226-2005 Technical requirement for environmental labeling products Plastic pipes for construction

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35974.2-2018 Plastics and plastic lining pressure vessels-Part 2:Materials
GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
GB/T 35463-2017 Test method for bulk density of wood-plastic composites and products

Professional Standard - Machinery

JB/T 53123-2000 Plastic Circular Loom Product Quality Grading
JB/T 2934-1993 Carbon materials and products for machinery
JB/T 53127-1999 Plastic Crusher Product Quality Grading
JB/T 2934-2006 Mechinery is with carbon material and products
JB/T 53029-1999 Hopper type plastic dryer product quality classification
JB/T 53032-1999 Product quality classification of plastic bag making machine
JB/T 53116-1999 Plastic mixer product quality classification
JB/T 53120-1999 Plastic kneader product quality classification

Anhui Provincial Standard of the People's Republic of China

DB34/T 2129-2014 Recycled Plastics and Products Standard System

CU-NC

NC 54-315-1985 Construction Materials and Products. Clay Materials Determination of Plasticity and Plastic Water
NC 54-317-1985 Construction Materials and Products. Clay Materials. Determination of Aging
NC 54-314-1985 Construction Materials and Products. Raw Materials for Ceramics. Determination of Granuiometry
NC 54-183-1985 Construction Materials and Products Raw Materials for Ceramics. Thermal Tests

CZ-CSN

CSN 64 0004-1995 Marking of plasticproducts for materiál indentification
CSN 72 7300-1987 Thermal insulation materials and products. Terms and definitions
CSN 64 0090-1974 Plaslios products stor;i
CSN 33 2033-1999 Marking of material and products with electrostatic properties
CSN 64 0011-1967 Technical specifications for lastics products
CSN 64 2013 Z4-2000 plastic. Hardenable pressed material. Ammonia plastic

CH-SNV

VSM 34161.2-1972 Hardenable plastic (molded plastic) material testing. Sample production
SEV 4008-1965 Textiles — Tests for colour fastness Section N02: Colour fastness to bleaching: Peroxide
SN 214 062/4-1988 Textiles — Tests for colour fastnessSection P01: Colour fastness to dry heat (excluding pressing)
VSM 14032.3-1944 Plastic (organic plastic) material testing
SN ISO 105/X06:1984 Plastic (organic plastic) material testing
SNV 24624-1938 Plastic (organic plastic) material testing

PT-IPQ

NP 1023-1980 Plastic materials for food packaging. Product Licensed Additives
NP EN ISO 11469:2002 Plastics Generic identification and marking of plastics products (ISO 11469-2000)
E 187-1966 Plastic material flat type. Resistance testing of household products
NP 2216-1988 Textile glass reinforced plastics Determination of loss in mass by calcination
NP 2126-1986 Food-related plastic materials. Analyze collected samples
NP 2212-1986 plastic material. Film and sheet, gravimetric measurement of average thickness per unit product

(U.S.) Ford Automotive Standards

FORD EMS INDEX VOL 7-2007 PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 7 - PLASTICS
FORD EMS INDEX VOL 6-2007 PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 6 - PLASTICS
FORD EMS INDEX VOL 7A-2007 PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 7 - PLASTICS
FORD EEMS INDEX VOL 7-2007 WORLDWIDE& EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 7 - PLASTICS
FORD EEMS INDEX VOL 6-2007 WORLDWIDE& EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 6 - PLASTICS
FORD EMS INDEX VOL 17-2007 PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 17 - ELECTRICAL

Standard Association of Australia （SAA）

AS 2070.3:1992 Plastics materials for food contact use - Styrene plastics materials
AS 2070.3:1979 Plastics materials for food contact use - Styrene plastics materials
AS 2070.4:1992 Plastics materials for food contact use - Acrylonitrile plastics materials
AS 2070.4:1979 Plastics materials for food contact use - Acrylonitrile plastics materials
AS 2070:1999 Plastics materials for food contact use
HB 37.3-1993 Handbook of Australian fire Standards - Plastics and rubber - Materials and products
AS 4049.2:1994 Paints and related materials - Road marking materials - Thermoplastic road marking materials
AS 2070.1:1992 Plastics materials for food contact use - Polyethylene
AS 2070.1:1977 Plastics materials for food contact use - Polyethylene
AS 2070.5:1992 Plastics materials for food contact use - Polypropylene
AS 2070.1:1980 Plastics materials for food contact use - Polyethylene
AS 2070.5:1979 Plastics materials for food contact use - Polypropylene
AS 2070.5:1981 Plastics materials for food contact use - Polypropylene
AS 2070.6:1984 Plastics materials for food contact use - Colourants
AS 2070.8:1992 Plastics materials for food contact use - Miscellaneous additives
AS 4049.2:2005 Paints and related materials - Pavement marking materials - Thermoplastic pavement marking materials - For use with surface applied glass beads
AS 4049.2:2005(R2016) Paints and related materials - Pavement marking materials - Thermoplastic pavement marking materials - For use with surface applied glass beads

CN-STDBOOK

图书 A-5007 EU Regulations and Guidelines on Plastic Food Contact Materials

British Standards Institution (BSI)

BS DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Test methods for characterisation of WPC materials and products
BS DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Characterisation of WPC products
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) — Part 1: Test methods for characterisation of WPC materials and products
DD ENV 13130-6-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in plastics
DD ENV 13130-4-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in plastics
BS ISO 13583-2:2003 Centrifugally cast steel and alloy products - Heat resistant materials
BS ISO 13583-2:2015 Centrifugally cast steel and alloy products. Heat-resistant materials
BS EN ISO 16396-1:2015 Plastics. Polyamide (PA) moulding and extrusion materials. Designation system, marking of products and basis for specifications
BS EN 62474:2012 Material declaration for products of and for the electrotechnical industry
BS ISO 13583-2:2023 Centrifugally cast steel and alloy products. Heat-resistant materials
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS EN 16602-70-71:2016 Space product assurance. Materials, processes and their data selection
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 1043-2:2011 Plastics. Symbols and abbreviated terms. Fillers and reinforcing materials
DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS PD CEN/TR 15438:2007 Plastics piping systems — Guidance for coding of products and their intended uses
BS ISO 5430:2023 Plastics. Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment. Test methods and requirements
BS EN ISO 294-2:2018 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
BS EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of 1,3-butadiene in plastics
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 20568-2:2017 Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 1322:1992 Specification for aminoplastic moulding materials
BS EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of isocyanates in plastics
BS DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications

SCC

BS 1322:1946 Synthetic resin (aminoplastic) moulding material and mouldings
AENOR UNE 53321 IN:1975 Plastic materials. General guide for the use of plastic materials in the packaging of food products.
BS 771:1938 Synthetic resin (Phenolic) moulding materials and mouldings
AENOR UNE 53013:1955 PLASTIC MATERIALS. EXTRACTION OF SAMPLES OF MOLDING POWDER
DANSK DS/EN ISO 11469:2016 Plastics – Generic identification and marking of plastics products
AENOR UNE 53243-11:1977 Plastic materials. Fabrics covered with plastic materials. Determination of the breaking resistance of stitched specimens.
DIN EN 18066 E:2024 Draft Document - Plastics - Design for recycling of PVC based profiles for construction products; German and English version prEN 18066:2024
NSF 14-2018 Plastics Piping System Components and Related Materials
NSF 14-2015 Plastics Piping System Components and Related Materials
NSF 14-2013 Plastics Piping System Components and Related Materials
NSF/ANSI 14-2019 Plastics Piping System Components and Related Materials
NSF/ANSI 14-2021 Plastics Piping System Components and Related Materials
NSF 14-2004 Plastics Piping System Components and Related Materials
NSF 14-2002 Plastics Piping System Components and Related Materials
NSF/ANSI 14-2020 Plastics Piping System Components and Related Materials
NSF 14-2016 Plastics Piping System Components and Related Materials
NSF 14-2011 Plastics Piping System Components and Related Materials
NSF 14-2006 Plastics Piping System Components and Related Materials
NSF 14-2017 Plastics Piping System Components and Related Materials
AENOR UNE 53081:1956 PLASTIC MATERIALS. EXTRACTION OF MATERIALS SOLUBLE IN ACETONE CONTAINED IN MOLDED AND LAMINATED PHENOLIC PRODUCTS
AENOR UNE 53033:1955 PLASTIC MATERIALS. DETERMINATION OF ABRASION RESISTANCE OF PLASTIC MATERIALS
DANSK DS/EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heatin...
SN-CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
BS EN ISO 293:2003 Plastics. Compression moulding test specimens of thermoplastic materials
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
MIL MIL-P-46183-1984 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
NS-EN ISO 11469:2016 Plastics — Generic identification and marking of plastics products (ISO 11469:2016)
SN-CEN/TS 15534-3:2007 Wood-plastics composites (WPC) — Part 3: Characterisation of WPC products
SPI B151.20-2013(R2018) American National Standard for Plastic Sheet Production Machinery - Safety Requirements for Plastic Sheet Production Machinery
AENOR UNE 53026:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT DEFORMATION OF MOLDED PLASTIC MATERIALS
SN-CEN/TR 15438:2007 Plastics piping systems — Guidance for coding of products and their intended uses
DANSK DS/CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses
AENOR UNE 53031:1974 Plastic materials. Determination of the surface electrical resistance of thermostable plastic materials.
AENOR UNE-CEN/TR 15438 IN:2012 Plastics piping systems - Guidance for coding of products and their intended uses
DANSK DS/EN 16602-70-71:2016 Space product assurance – Materials, processes and their data selection
NS-EN 16602-70-71:2016 Space product assurance — Materials, processes and their data selection
AENOR UNE 53243-16:1974 Plastic materials. Fabrics covered with plastic materials. Determination of resistance to coloration due to the effect of sulfides.
NS-EN ISO 10210:2017 Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
AENOR UNE 53035:1976 PLASTIC MATERIALS. BEHAVIOR OF RIGID PLASTIC MATERIALS IN FRONT OF A GLOW ROD
BS EN ISO 294-3:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Small plates
NS 4288:1978 Bags of plastic sheet for transport of agricultural products
VDI 3822 BLATT 2.1.3-2012 Damage analysis — Damage to thermoplastic products due to incorrect material selection and defects in the material
HOLDEN HN 1077-2009 REINFORCED PLASTIC MATERIAL
AENOR UNE-EN ISO 10210:2018 Plastics. Methods for preparing samples for biodegradation testing of plastic materials. (ISO 10210:2012).
CSA C22.2 No.210-2005(R2010) Appliance wiring material products
DANSK DS/EN ISO 10210:2017 Plastics – Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
DANSK DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties
CSA C22.2 No.210.2-1988 Appliance Wiring Material Products
BS DD ENV 13130-4:1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation-Determination of 1,3-butadiene in plastics
12/30266170 DC BS EN 15534-1. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
ASD-STAN prEN 6063:1970 Fibre reinforced plastics - Test method - Determination of material degradation due to chemical products
VDI 3822 BLATT 2.1.3-2012 Damage analysis — Damage to thermoplastic products due to incorrect material selection and defects in the material
SAA HB37.3-1993 Handbook of Australian fire Standards, Part 3: Plastics and rubber - Materials and products
DANSK DS/EN ISO 16103:2005 Packaging - Transport packages for dangerous goods - Recycled plastics material
NS 4012:1971 Abbreviations (symbols) for plastics and plastic materials
AENOR UNE-EN ISO 293:2006 Plastics - Compression molding of test specimens of thermoplastic materials (ISO 293:2004)
AENOR UNE 53243-12:1974 Plastic materials. Fabrics covered with plastic materials. Determination of the slip angle.
CSA C22.2 No.210-2011 Appliance wiring material products
HOLDEN HN 1010-2001 Reinforced Plastic Material
12/30240423 DC BS ISO 16396-1. Plastics. Polyamide (PA) moulding and extrusion materials. Designation system, marking of products and basis for specification
BS 1322:1956 Specification for aminoplastic moulding materials
AENOR UNE 53018:1955 Plastic materials. Determination of humidity of molding compounds.
BS 1322:1981 Specification for aminoplastic moulding materials
CSA C22.2 No.210-M1986-1986 Appliance Wiring Material Products
DANSK DS/EN 13130-1:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plas...
AENOR UNE 53105:1970 Plastic materials. Plastic seats for toilet bowl. (Specifications).
AENOR UNE 53243-6:1974 Plastic materials. Fabrics covered with plastic materials. Determination of shrinkage.
BS DD ENV 13130-6:1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation-Determination of vinylidene chloride in plastics
BS EN ISO 12086-2:2001 Plastics. Fluoropolymer dispersions and moulding and extrusion materials-Preparation of test specimens and determination of properties
CSA C22.2 No.210.1-1988 Appliance Wiring Material Products
CAN/CSA C22.2 No.210.2-M90-1990(R2001) Appliance Wiring Material Products
NS-EN 13130-1:2004 Materials and articles in contact with foodstuffs — Plastics substances subject to limitation — Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plas...
DIN EN ISO 10210 E:2017 Draft Document - Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German and English version prEN ISO 10210:2017
BS 1322:1975 Specification for aminoplastic moulding materials
NS-EN 14233:2002 Materials and articles in contact with foodstuffs — Plastics — Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature ...
AENOR UNE 53239:1973 PLASTIC MATERIALS. COATINGS OF PLASTIC MATERIALS FOR FLOOR. DETERMINATION OF IMPACT RESISTANCE
NS-EN 1871:2020 Road marking materials — Paint, thermoplastic and cold plastic materials — Physical properties

GSO

OS GSO 132:2012 Plastic Bottles Used for Bottling Chemical Materilas and Products
GSO ISO 10210:2013 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
BH GSO ISO 10210:2016 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
GSO ISO 3915:2013 Plastics - Measurement of resistivity of conductive plastics
GSO 2545:2021 Recycled Plastic Materials And Articles Intended to Come Into Contact With Food
BH GSO 2545:2022 Recycled Plastic Materials And Articles Intended to Come Into Contact With Food
GSO 132:2012 Plastic Bottles Used for Bottling Chemical Materilas and Products
GSO ISO 16103:2007 Packaging - Transport packaging for dangerous goods – Recycled plastics material

German Institute for Standardization

DIN CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products; German version CEN/TS 15534-3:2007
DIN-Fachbericht CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses; German version CEN/TR 15438
DIN 7708-1:1965 Plastic Moulding Materials; Plastic Products; Concepts
DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
DIN EN 18066:2024 Plastics - Design for recycling of PVC based profiles for construction products; German and English version prEN 18066:2024
DIN EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000
DIN CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products; German version CEN/TS 15534-1:2007
DIN EN ISO 11469 E:2015-09 General marking and marking of plastic plastic products (draft)
DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties
DIN EN 15346:2008 Plastics - Recycled Plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates; English version of DIN EN 15346:2008-02
DIN 24273:1998 Pumps and pump units for liquids - Material and product tests
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011); German version EN ISO 1043-2:2011
DIN EN ISO 11469:2017-01 Plastics - Generic identification and marking of plastics products (ISO 11469:2016); German version EN ISO 11469:2016
DIN EN 18066:2024-03 Plastics - Design for recycling of PVC based profiles for construction products; German and English version prEN 18066:2024 / Note: Date of issue 2024-02-09
DIN EN 15346 E:2013-03 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
DIN EN 16602-70-71:2016-12 Space product assurance - Materials, processes and their data selection; English version EN 16602-70-71:2016
DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53733 E:2014-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN 51060:2000 Refractory ceramic raw materials and refractories - Definitions of the terms refractory, high refractory
DIN 53733 E:2020-10 Testing of plastics - Size reduction of plastic products for test purposes
PAS 1026-2-2004 Classification system for building materials and auxiliary building materials;Equipment and installation products; Part 2:Property definitions
DIN EN 13130-1:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plas...
DIN EN 14233:2003-01 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature ...

HU-MSZT

MSZ 5248/5-1980 Plastic filter. Technical raw materials. Plastic products
MSZ 11687-1982 Testing methods for layered plastic products
MSZ 5648-1982 Printing industry reshapes product raw materials
MSZ KGST 2344-1980 Density determination of plastic pressed products
MSZ KGST 1427-1978 Comprehensive raw material quantity and product consumption concept definition
MSZ 710/1-1988 Plastic material forming

Association Francaise de Normalisation

NF T50-060:1994 PLASTIC. GENERIC IDENTIFICATION AND MARKING OF PLASTIC PRODUCTS.
NF T50-060:2000 Plastics - Generic identification and marking of plastics products.
NF EN ISO 19712-2:2013 Plastics - Solid decorative surface covering materials - Part 2: determination of properties - Sheet products
NF C05-474:2012 Material declaration for products of and for the electrotechnical industry
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastics - Sample preparation methods for biodegradation testing of plastic materials
NF EN 17228:2019 Plastiques - Polymères, plastiques et produits en plastique biosourcés - Terminologie, caractéristiques et communication
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF X46-035:2021 Lead survey - Detection of lead prior to works in coatings and construction materials and products
NF EN 1873/IN1:2016 Accessoires préfabriqués pour couverture - Lanterneaux ponctuels en matière plastique - Spécifications des produits et méthodes d'essais
NF EN 1873+A1:2016 Accessoires préfabriqués pour couverture - Lanterneaux ponctuels en matière plastique - Spécifications des produits et méthodes d'essais
NF T51-294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.
NF L90-200-70-71*NF EN 16602-70-71:2017 Space product assurance - Materials, processes and their data selection
NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.
NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
NF EN ISO 19712-3:2022 Plastics - Solid decorative surface covering materials - Part 3: determination of properties - Shaped products
NF P85-411:1987 Sealing profiles, joinery products. Profiles between door leaf and door frame. Plasticized PVC thermoplastic material.
NF T50-001-1*NF EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation system, marking of products and basis for specifications
NF EN ISO 3671:1998 Matières plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles.
NF EN ISO 16103:2005 Packaging - Transport packaging for dangerous goods - Recycled plastic materials

Japanese Industrial Standards Committee (JISC)

JIS K 6999:1994 Plastics -- Generic identification and marking of plastic products
JIS K 6999:2004 Plastics -- Generic identification and marking of plastics products
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7145:2000 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter

NEMA - National Electrical Manufacturers Association

NEMA EW 5-1987 Guidelines for the Preparation of the Material Safety Data Sheets for Welding Consumables and Related Products
NEMA EW 5-1996 Guidelines for the Preparation of the Material Safety Data Sheets for Welding Consumables and Related Products
NEMA EW 5-1982 GUIDELINES FOR THE PREPARATION OF THE MATERIAL SAFETY DATA SHEET FOR WELDING CONSUMABLES AND RELATED PRODUCTS

American National Standards Institute （ANSI)

ANSI/NSF 14(i29)-2009 Plastics piping system components and related materials
ANSI/NSF 14(i21)-2008 Plastics piping system components and related materials
ANSI/NSF 14(i22)-2008 Plastics piping system components and related materials
ANSI/NSF 14(i13)-2006 Plastic Piping System Components and Related Materials
ANSI/NSF 14(i16)-2006 Plastic Piping System Components and Related Materials
ANSI/NSF 14(i32)-2009 Plastics piping system components and related materials
ANSI/NSF 14(i27)-2009 Plastics piping system components and related materials
ANSI/NSF 14(i33)-2009 Plastics piping system components and related materials
ANSI/NSF 14(i20)-2007 Plastic piping system components and related materials
ANSI/ASTM D256:1993 Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (08.01, 09.02)

Korean Agency for Technology and Standards (KATS)

KS M ISO 11469:2008 Plastics－Generic identification and marking of plastics products
KS K ISO TR 13434-2006(2011) Geotextiles and geotextile-related products－Guidelines on durability
KS M ISO 16396-1:2019 Plastics — Polyamid(PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 800:2012 Plastics－Phenolic moulding materials－Specification
KS M ISO 800:2007 Plastics－Phenolic moulding materials－Specification
KS M 3804-1980 Frame materials for vinylhouse

VDI - Verein Deutscher Ingenieure

VDI 2020-1972 Plastic materials; preparation of material performance sheets and hints for their application
VDI 2491-1995 Efficient delivery of production material and spare parts
VDI 3822 Blatt 2.1.3-2010 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material

International Organization for Standardization (ISO)

ISO 11469:1993 Plastics; generic identification and marking of plastic products
ISO 11469:2000 Plastics - Generic identification and marking of plastics products
ISO 11469:2016 Plastics - Generic identification and marking of plastics products
ISO 2112:1977 Plastics — Aminoplastic moulding materials — Specification
ISO 13651:1996 Plastics - Epoxy resins and related materials - Determination of total saponifiable chlorine
ISO 13968:1997 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 1043-2:1988 Plastics; symbols; part 2: fillers and reinforcing materials
ISO/FDIS 5430 Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements
ISO 2112:1990 Plastics; aminoplastic moulding materials; specification
ISO 800:1992 Plastics; phenolic moulding materials; specification
ISO 800:1977 Plastics — Phenolic moulding materials — Specification

KR-KS

KS M ISO 11469-2018(2023) Plastics — Generic identification and marking of plastics products
KS M ISO 16396-1-2019 Plastics — Polyamid(PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
KS M ISO 800-2007 Plastics－Phenolic moulding materials－Specification

Spanish Association for Standardization (UNE)

UNE-EN ISO 11469:2017 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE-CEN/TS 15534-1:2008 EX Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-CEN/TS 15534-3:2008 EX Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
UNE-CEN/TR 15438:2012 IN Plastics piping systems - Guidance for coding of products and their intended uses
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE 53-257 Pt.2-1988 Characteristics and test methods of plastic bags for transportation of undershirt products
UNE-EN 16602-70-71:2016 Space product assurance - Materials, processes and their data selection (Endorsed by AENOR in October of 2016.)
UNE 53031:1974 PLASTICS MATERIALS. DETERMINATION OF SUPERFICIAL RESISTANCE OF THERMOSETTING PLASTICS MATERIALS
UNE 53282:1975 PLASTICS MATERIALS. DETERMINATION OF N2 CONTENT OF RESIUS AND PLASTICS MATERIALS
UNE-EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
UNE 53 081 Extraction of Acetone-Soluble Materials from Phenolic Molded/Laminated Products
UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

National Sanitation Foundation (NSF)

NSF 14A-2011 Plastics Piping System Components and Related Materials
NSF 14-2014 Plastics Piping System Components and Related Materials
NSF 14-2010 Plastics Piping System Components and Related Materials
NSF 14-2012 Plastics Piping System Components and Related Materials
NSF 14-2009 Plastics Piping System Components and Related Materials
NSF DRIN-2002 Drinking Water Treatment Products and Related Components and Materials
NSF WAS-2001 Wastewater Treatment Units and Related Products, Components and Materials

RU-GOST R

GOST R 56975-2016 Polymer composites. Appearance of glass-reinforced plastic laminate products
GOST 19729-1974 Ground talc for manufacture of rubber products and plastics. Specifications
GOST 17478-1995 Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications
GOST R 50801-1995 Wood raw material, forest products, semi-produced materials and wood products. Sampling rules and methods of measuring specific activity of radionuclides
GOST 17478-1972 Moulding material DSV. Specifications
GOST R 50491-1993 Plastics. Aminoplastic moulding materials. Determination of volatile matter

United States Navy

NAVY MIL-P-8045 B-1964 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B (4)-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B NOTICE 1-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-15280 J-1988 PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES)

South African Bureau of Standard

SANS 11043-2:2004 Plastics - Symbols and abbreviated terms Part 2: Fillers and reinforcing materials

GOST

GOST 12019-2021 Plastics. Preparation of test specimens from thermoplastics. General requirements
GOST 33224-2015 Textile materials and products. Designations for the composition of raw materials

European Committee for Standardization (CEN)

EN ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
EN ISO 11469:2000 Plastics - Generic Identification and Marking of Plastics Products ISO 11469:2000
EN ISO 16396-1:2022 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 16396-1:2022)
EN 16602-70-71:2016 Space product assurance - Materials@ processes and their data selection
PD CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses
EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system@ marking of products and basis for specifications

CEN - European Committee for Standardization

EN ISO 1043-2:2001 Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials
PD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties

Danish Standards Foundation

DS/EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heating i
DS/CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
DS/CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses
DS/EN ISO 16103:2005 Packaging - Transport packages for dangerous goods - Recycled plastics material

TH-TISI

TIS 1705-1998 Plastics.aminoplastic moulding materials.specification

Lithuanian Standards Office

LST EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO 11469:2000)
LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
LST EN 14233-2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for

National Fire Protection Association (NFPA)

NFPA FPH SECTION 8-2003 Materials, Products, and Environments

VN-TCVN

TCVN 6514-3-1999 Plastics materials for food contact use.Part 3: Styrene plastics materials
TCVN 6514-4-1999 Plastics materials for food contact use.Part 4: Acrylonitrile plastics materials

American Society for Testing and Materials (ASTM)

ASTM D6109-24 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM D7031-11 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

IT-UNI

UNI 4292-1959 Plastic material testing. Thermohard materials*
UNI 4293-1959 Plastic material testing. Thermohard materials*
UNI 4301-1959 Plastic material testing. Thermohard materials*
UNI 4300-1959 Plastic material testing. thermohard material
UNI 4287-1959 Plastic material testing. thermohard material
UNI 4299-1959 Plastic material testing. thermohard material
UNI 4298-1959 Plastic material testing. thermohard material
UNI 4297-1959 Plastic material testing. thermohard material
UNI 4290-1959 Plastic material testing. thermohard material
UNI 4296-1959 Plastic material testing. thermohard material
UNI 7092-1972 Plastic material experiments. Determination of capacity and quality of non-bubble plastic materials
UNI 5819-1966 Plastic material testing. Determination of tensile properties of plastic materials, replacing uni 4280

National Aeronautics and Space Administration (NASA)

NASA NPR 9250.1-2008 Property, Plant, and Equipment and Operating Materials and Supplies

AT-ON

ONORM C 1130-1986 Petroleum products and bituminous materials; determination of water; distillation method Petroher products and bituminous products; determination of water content; distillation method
OENORM EN 1871-2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

PL-PKN

PN A86850-1989 Raw materials and products of fish and aquatic invertebrates Chitosan
PN C97000-1973 Coal derivative products Principal raw materials and their procesing's products Names and definitions
PN C89004-1987 Thermoplastics products Marks and marking
PN BN 6065-01-1963 Auxiliary materials for man-made products. Pianofor AN． raw material
PN-EN 1871-2021-03 E Road marking materials -- Paint, thermoplastic and cold plastic materials -- Physical properties

DE-VDA

VDA 230-209-2008 Automotive leather, plastic web products and textiles - Determining their bending properties

RO-ASRO

STAS 6572-1968 plastic. Samples made of thermoplastic materials. General rules
STAS 7682-1980 Metallurgy RAW MATERIALS AND METALLURGICAL PRODUCTS Nomenclatura

BELST

STB 2041-2010 Thermoplastic composite products for road construction. Specifications

AR-IRAM

IRAM 13 303-1962 Standard atmospheric environment for testing and conditioning of plastic materials
IRAM OFICIAL 12 523 N.I.O.-1958 Plastic refractory materials