Pipe material compatibility test Performance change test

Pipe material compatibility test Performance change test, Total:339 items.

The international standard classification for "Pipe material compatibility test Performance change test" includes: Packaging and distribution of goods in general , Packaging materials and accessories , Rubber , Fluid power systems in general , Rubber and plastics products in general , Refractories , Plastics pipes , Insulating gases , Wastes in general , Inorganic chemicals in general , Powder metallurgy , Plastics pipes, fittings and valves , Advanced ceramics , Piezoelectric and dielectric devices , Mechanical testing of metals , Hoses and hose assemblies , Other electrical accessories , Integrated circuits. Microelectronics , Test conditions and procedures in general , Construction materials in general , Textile fabrics , Medical Sciences and health care facilities in general , Production in the chemical industry , Farming and forestry , Semi-manufactures of timber , Implants for surgery, prosthetics and orthotics , Reinforced plastics , Footwear , Equipment for the chemical industry .

The Chinese standard classification for "Pipe material compatibility test Performance change test" includes: Packaging material and container , Rubber products in general , Special electronic technology material , Hydraulic and pneumatic device , Other refractory material , Plastic profile , Insulating parts for electronic equipment , Basic standards and general methods , Inorganic chemicals in general , Metal physical property test method , Special ceramics , Packaging method , Metal mechanical property test method , Rubber tube, rubber belt and tape , Electrician alloy parts , Semiconductor integrated circuit , Electrical equipment and tool in general , Basic standards and general methods , Basic standards and general methods , Marking, packaing, transport and storage , Nonmetallic materials used for aviation and aerospace , Pesticide management and application method , Artificial board , Sanitation in general , Fibre reinforced composites , Non-metal chemical machinery equipment , Electrical insulating material and its products .

Professional Standard - Building Materials

JC/T 2111-2012 Test method for phase change temperature-adjustable performance of building materials

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
GB/T 16265-1996 Test of packaging materials―Compatability
GB/T 43305-2023 Practices for compatibility tests of waste chemicals
GB/T 15750-2008 Test methods for the properties of piezoelectric ceramics - Test for the ageing properties
GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
GB/T 43092-2023 Electrochemical performance test of lithium ion battery cathode materials—Test method for high temperature performance
GB/T 23764-2009 Test method of photocatalytic materials for self-cleaning
GB/T 16304-2008 Test methods of the properties for piezoelectric ceramics - Test for relation between electric field and strain
GB/T 3389-2008 Test methods for the properties of piezoelectric ceramics - Test for the performance parameter
GB/T 23762-2020 Test method for water purification performance of photocatalytic materials
GB/T 14832-1993 Test of compatibility between rubber material and hydraulic fluid
GB/T 8804.1-2003 Thermoplastic pipes - Determination of tensile properties - Party 1: General test method
GB/T 11310-1989 Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants
GB/T 15750-1995 Test program for the ageing properties of piezoelectric ceramics
GB/T 23761-2009 Test method of photocatalytic materials for air purification
GB/T 3389.7-1986 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
GB/T 28607-2012 Determination of compatibility between standard elastomeric materials and automotive engine oil
GB 11310-1989 Test methods for the properties of piezoelectric ceramics; Test methods for temperature characteristics of relative free dielectric constants
GB/T 32329-2015 Test method for oxidation resistance of oxynitride materials―Non-isothermal oxidation
GB/T 10623-2008 Metallic material - Mechanical testing - Vocabulary
GB/T 24273-2009 Test method for electrical properties of electrical contact materials
GB/T 18042-2000 Thermoplastics pipes--Determination of creep ratio
GB/T 16265-2008 Test method of packaging materials - Compatibility
GB/T 14745-1993 Packaging－Cushioning materials－Test method for creep properties
GB/T 18950-2023 Rubber and plastics hoses—Methods of exposure to laboratory light sources—Determination of changes in colour, appearance and other physical properties

Group Standards of the People's Republic of China

T/CNESA 1301-2020 Testing regulations of performance attenuation on phase-change thermal energy storage units
T/GDCQMA 002-2024 Guidelines for Compatibility Test Evaluation of Cosmetic Packaging Materials
T/SASJL 0002-2021 Trim materials in motor vehicles fogging test
T/CCCTA 0048-2024 Test methods for laboratory performance of anti-corrosion materials of power transmission and transformation tquipment
T/CADBM 45-2021 Testing method for decontamination performance of coating materials Environmental test chamber method
T/FDCA 010-2023 Cosmetics and cosmetics packaging compatibility test guidelines
T/CERS 0003-2018 Testing regulations of performance attenuation on phase-change thermal energy storage unit
T/CEEIA 436-2020 Test Method for Compatibility of Synthetic Organic Ester Type Insulating Oil and Construction Material
T/CSTM 00514-2022 Metallic materials – Determination of tensile strain hardening properties
T/ZSA 6-2020 Testing regulations of performance attenuation on phase-change thermal energy storage units
T/CEEIA 437-2020 Standard Test Methods for Compatibility of Natural Ester Type Insulating Oil with Construction Material
T/CSTM 01003-2023 Measurement methods for electrical properties of phase change memory
T/CI 208-2023 Test method for high-temperature stability and substrate compatibility of liquid cooling thermal management materials
T/CIE 155-2023 Measuring methods of electrical properties for non-volatile phase change memory

住房和城乡建设部

JG/T 534-2018 Testing method for thermal reliability of phase change materials used in buildings

Professional Standard - Textile

FZ/T 60045-2014 Textile trim materials in the interior of automobiles―Test method for fogging characteristics
FZ/T 50061-2023 Man-made fibers——Test method for thermal absorption and release performance of phase change materials——Differential scanning calorimetry(DSC)

Professional Standard - Aerospace

QJ 2136.2-1991 Specimens for physical and chemical re-inspection of metallic materials specify mechanical and process performance test specimens
QJ 10014.2-2011 Space systems.Safety and compatibility of materials.Part 2:Determination of flammability of electrical-wire insulation and accessory materials
QJ 10014.1-2008 Safety and Compatibility of Space Materials Part 1: Determination of upward burning performance of materials
QJ 2136.4-1991 Specimens for physical and chemical re-inspection of metal materials Specified physical performance test specimens

Professional Standard - Pharmaceutical Packaging

YBB 0014-2002 Yaopinbaozhuangcailiao yu yaowu xiangrongxingshiyan zhidao yuanze Guidelines of evaluating compatibility
YBB 0014(02)-2002 Guidelines for Compatibility Testing of Drug Packaging Materials and Drugs (Trial)

Professional Standard - Civil Aviation

MH 6021-2000 The materials compatibility test for aerochemical maintenance

Professional Standard - Military and Civilian Products

WJ 2075-1992 Test method for performance parameters of infrared image changer tube
WJ 2707.10-2008 Test methods of performance of FAE. Part 10: Material contact

Professional Standard - Electricity

DL/T 1836-2018 Method for determination of compatibility of mineral insulating oil with transformer materials

未注明发布机构

ASTM RR-C16-1020 1995 C0165-Test for Measuring compressive Properties of Thermal Insulation
AS/NZS 1580.481.1.5:1999(R2013) Paints and related materials - Methods of test - Coatings - Exposed to weathering - Change in gloss
AS/NZS 1580.403.1:1999(R2013) Paints and related materials - Methods of test - Scratch resistance
ASTM RR-C16-1003 1984 C0335/C0335M-Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
DIN 52452-2 E:2014-09 Testing of sealants in building construction - Compatibility of sealants - Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids
ASTM RR-C16-1019 1995 C0335/C0335M-Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

Professional Standard - Electron

SJ/T 11469-2014 Test methods for the piezoelectric properties of ceramics shear piezoelectric strain constant d15 testing on quasi-static principle
SJ 20746-1999 Test method for the properties of liquid crystal materials

国家能源局

SY/T 7369-2017 Test method for compatibility of fiber reinforced plastic pipes in oil field environment

Taiwan Provincial Standard of the People's Republic of China

CNS 14310-1999 Method of determining the plastic strain ratio for metallic sheet and strip

Professional Standard - Agriculture

NY/T 1860.10-2016 Guidelines on the determination of physico-chemical properties of pesticides. Part 10:Oxidation/Reduction:chemical incompatibility
NY/T 1860.10-2010 Guidance on the determination of physico-chemical properties of pesticides—Part 10：Oxidation/Reduction:Chemical incompatibility

Professional Standard - Forestry

LY/T 1927-2010 Test method of evaluating the properties of glued-laminated timber
LY/T 3298-2022 Test method for natural weathering properties of coatings used for exterior wood

Professional Standard - Medicine

YY/T 1920-2023 Blood compatibility tests of haemodialysers

工业和信息化部

YS/T 1266-2018 Plates and rods of refractory metals-Test method for creep properties
YB/T 4994-2022 Test method for flexural properties of carbon materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41061-2021 Test methods for creep properties of fiber reinforced plastics

Professional Standard - Light Industry

QB/T 4558-2013 Footwear - Test methods for elastic material - Tensile property

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 14745-2017 Test method of creep properties for package cushioning material

Professional Standard - Chemical Industry

HG/T 3210-2002 Methods of test for the performance of acid resistant ceramic material

Professional Standard - Machinery

JB/T 8631-1997 Test Method of Determining Thermal Aging Property of Flexible Sheets with Pipe Winding Method

KR-KS

KS F 2821-2018(2023) Standard test method for change in properties of plastic building materials resulting from weathering resistence
KS L 1672-2023 Specimen preparation for the performance test of slurry-type photocatalytic materials
KS I 3547-2022 Performance test methods for evaluating the reduction of volatile organic compound and aldehyde concentrations by building material — Liquid phase building material
KS M ISO 6259-1-2016 Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS D 8511-2003(2023) Plastic strain ratio test method for thin metal materials
KS L 1673-2023 Test method for toluene removal performance of photocatalytic construction materials

German Institute for Standardization

DIN 15586-3:1985 Testing of mechanical properties of radiation sensitive film materials; determination of the dimensional change of photographic films and papers
DIN 52452-1:1989 Testing of building sealants for compatibility with construction materials
DIN 51103:1975 Testing of ceramic materials; determination of the alkali resistance, method with grained test material
DIN EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005); English version of DIN EN ISO 8987:2005
DIN 50051:1977 Testing of Materials; Burning Behaviour of Materials; Burner
DIN EN ISO 6259-1:2015-08 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015
DIN 55436-2:1990 Packaging test; tubes made of aluminium; determination of the deformability of the tube body
DIN 52452-2:2015-07 Testing of sealants in building construction - Compatibility of sealants - Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids

American Society for Testing and Materials (ASTM)

ASTM F2331-11(2016) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM D5642-09 Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM D5642-16 Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM D5642-99 Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM D1370/D1370M-12(2021) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D1370-00 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D1370/D1370M-12(2016) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM C1784-14 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D3835-16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D1370-00(2007) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D2221-01(2021) Standard Test Method for Creep Properties of Package Cushioning Materials
ASTM C1784-13 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM D1370/D1370M-12 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3835-96 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM F1534-05 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM A344-68(1972) Methods of Electrical and Mechanical Properties of Magnetic Materials
ASTM F1534-10 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM F1534-16 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM F1534-94e1 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM F1534-00 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM F1534-22 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
ASTM F2331-04 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
ASTM D2196-18e1 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
ASTM D5642-16(2022) Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D5045-14(2022) Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D3455-11(2019) Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
ASTM F2331-04e1 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
ASTM D5422-00 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM F1515-98 Standard Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change
ASTM F1515-03 Standard Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change
ASTM D2196-18 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess
ASTM D5045-99(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D5642-99(2004) Standard Test Method for Sealed Tube Chemical Compatibility Test
ASTM E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750deg;C
ASTM C639-15 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D7078/D7078M-20 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7100-04 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity
ASTM D4740-95(2000) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
ASTM D4740-19 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
ASTM D7078/D7078M-05 adjunct Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-19 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
ASTM D7078/D7078M-20e1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

International Electrotechnical Commission (IEC)

IEC 60588-5:1979 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
IEC 61000-4-28:1999+AMD1:2001 CSV Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test

GSO

BH GSO IEC 60588-5:2016 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
GSO ISO 18916:2013 Imaging materials -- Processed imaging materials -- Photographic activity test for enclosure materials
OS GSO ISO/TR 29381:2013 Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties
BH GSO ISO 6259-1:2016 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
GSO ISO 6259-1:2015 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
GSO ISO 18907:2013 Imaging materials -- Photographic films and papers -- Wedge test for brittleness
OS GSO ISO 18907:2013 Imaging materials -- Photographic films and papers -- Wedge test for brittleness

IN-BIS

IS 8385-1977 Oil filter element material compatibility test method
IS 7551-1975 Compatibility test method for plastic containers

GM Global

GMW 14357-2012 Procedures of Test for Cellular and Related Materials Determination of Resistance to Humidity Aging Issue 2; English

IT-UNI

UNI 4914-1962 Elastic materials: testing of vulcanized materials, determination of tear resistance
UNI 5411-1964 Elastic materials: Vulcanized material test, weight change after water immersion
UNI 7718-1977 Elastic material. Tests on raw materials, determination of changes in plasticity index of natural rubber
UNI 6060-1967 Plastic material testing. Tolerance to the effects of chemical substances. Measurement of changes in mechanical properties
UNI 7897-1978 Elastic material. Testing of vulcanized materials, compensated temperature determination (Test TR)
UNI 5410-1964 Elastomeric materials: tests on vulcanized materials, general rules for liquid resistance tests
UNI 5405-1964 Elastomeric materials: Vulcanized material testing, vulcanization contact determination of elastomeric and metallic materials (flat test block) 0
UNI 7320-1974 Elastic materials: testing of vulcanized materials, determination of brittleness temperature limits
UNI 5609-1965 Elastic materials: testing of vulcanized materials, trace determination
UNI 5611-1965 Elastomeric materials: testing of vulcanized materials, determination of water vapor permeability
UNI 7716-1977 Elastic material. Testing of vulcanized materials, determination of resilience
UNI 5610-1965 Elastic materials: testing of vulcanized materials, determination of stress relaxation, elastic recovery and permanent deformation after compression
UNI 5406-1964 Elastomeric materials: Testing of vulcanized materials, vulcanization contact determination of elastomeric and metallic materials (cylindrical test blocks) 15
UNI 4910-1962 Elastomeric materials: tests on vulcanized materials, determination of free sulfur
UNI 7533-1976 Elastic material. Vulcanized material test, permanent deformation after 25% low temperature compression
UNI 4913-1962 Elastic materials: Vulcanized material test, permanent deformation after 25% compression
UNI 5412-1964 Elastic materials: Vulcanized material test, weight change after immersion in liquids other than water
UNI 6059-1967 Plastic material testing. Tolerance to the effects of chemical substances. Mass and dimensional change determination
UNI 5111-1969 Mechanical tests of ferrous materials. Creep test for steel at elevated temperatures.
UNI 4906-1962 Elastomeric Materials: Vulcanized Material Test, Standard Temperature
UNI 7898-1978 Elastic material. Testing of vulcanized materials, determination of static deflection coefficient
UNI 5613-1979 Elastic materials: tests on vulcanized materials and unprocessed materials. Ash content determination
UNI 5409-1964 Elastic materials: vulcanized material test, artificial accelerated aging test under pressure oxidation atmosphere
UNI 4917-1962 Elastic materials: testing of vulcanized materials, testing of effects of contact with metals
UNI 5408-1964 Elastomeric materials: vulcanized material tests, artificially accelerated aging tests in furnaces
UNI 4915-1962 Elastomeric materials: vulcanized material testing, separation load determination between vulcanized elastomeric materials and fabric layers
UNI 5407-1978 Elastic materials: Vulcanized material test, use hysteresis tester to measure viscoelastic parameters. Tangorra
UNI 4907-1962 Elastomeric materials: testing of vulcanized materials, preparation of samples
UNI 7377-1974 Elastomeric materials: determination of vulcanized materials, time interval between vulcanization and testing

SCC

AS 1180.5C:1972 Methods of test for hose made from elastomeric materials, Method 5C: Hydrostatic pressure - Change-in-length test
AS 1580.214.0:1990 Paints and related materials - Methods of test, Method 214.0: Rheological properties - Guide to test methods
BS 2782-7 METHOD 722B:1996 Methods of testing plastics. Rheological properties-Determination of the fluidity of plastics using capillary and slit-die rheometers
BS 5884:1980 Methods of test for determination of d.c. magnetic properties of magnetic materials
BS 2782-11 METHOD 1105A:1983 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Method of test for the change in mass of unplasticized polyvinyl chloride pipes and fittings on immersion in sulphuric acid
CAN 3-Z310.6-M84-1984 Biocompatibility testing
AS 1180.5E:1972 Methods of test for hose made from elastomeric materials, Method 5E: Hydrostatic pressure- Expansion and distortion test
NS-EN 1367-2:1998 Tests for thermal and weathering properties of aggregates — Part 2: Magnesium sulfate test
BS EN 1367-2:1998 Tests for thermal and weathering properties of aggregates-Magnesium sulfate test
09/30154552 DC BS ISO 23228. Thermoplastics pipes for the conveyance of fluids. Determination of the stress-rupture resistance of pipe resin materials using plain strain tensile (PSGT) specimens
AS 1580.208.1:1981 Paints and related materials - Methods of test, Method 208.1: Thinner compatibility
BS 2782-4 METHOD 433B:1979 Methods of testing plastics. Chemical properties-Determination of easily saponifiable chlorine in epoxide resins and related materials
DANSK DS/EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
AS/NZS 1462.2:1998 Methods of test for plastics pipes and fittings, Method 2: Method for determining the flattening properties of plastics pipes and fittings
NS 3259:1982 Test methods for rigid flat sheets - Dimensional changes associated with changes in relative air humidity
AS 1580.404.1:1981 Paints and related materials - Methods of test, Method 404.1: Recoating properties
BS 1902-5.9:1985 Methods of testing refractory materials. Refractory and thermal properties-Determination of permanent change in dimensions on heating of shaped insulating products (method 1902-509)
BS 2782-7 METHOD 720A:1979 Methods of testing plastics. Rheological properties-Determination of melt flow rate of thermoplastics
04/30102367 DC BS 5A 4-4. Aerospace series. Test pieces and test methods for metallic materials. Part 4. Plastic deformation tests on tubes
AS 1580.461.1:1977 Paints and related materials - Methods of test, Method 461.1: Determination of resistance to yellowing (dark chamber)
BS 2782-7 METHOD 733A:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number of polyamides
SN-CEN/TR 16884:2016 Automotive fuels — Diesel fuel — Cold operability testing and fuel performance correlation
BS 2782-5 METHOD 552A:1981 Methods of testing plastics. Optical and colour properties, weathering-Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
BS 903-A2:1956 Methods of testing vulcanized rubber. Determination of tensile stress-strain properties
JIS A 1475:2019 Method of test for hygroscopic sorption properties of building materials
BS PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
AS 1580.481.1.5:1991 Paints and related materials - Methods of test, Method 481.1.5: Coatings - Exposed to weathering - Change in gloss
NS-EN 1367-5:2002 Tests for thermal and weathering properties of aggregates — Part 5: Determination of resistance to thermal shock
BS 2782-1 METHOD 150A:1976 Methods of testing plastics. Thermal properties-Determination of stiffness in torsion as a function of temperature

International Organization for Standardization (ISO)

ISO 23706:2020 Plastics — Determination of apparent activation energies of property changes in standard weathering test methods
ISO 10466:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
ISO 8987:1995 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
ISO 10466:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
ISO/CD 7039 Metallic materials — Tensile testing — Method for evaluating changes of properties in a high-pressure gaseous environment using a hollow test piece
ISO 8987:1988 Plastics; phenolic resins; determination of reactivity on a B-transformation test plate
ISO 6444:1980 Door leaves; Test of behaviour under humidity variations (successive uniform climates)
ISO/DIS 9854-2.2 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials

CH-SNV

VSM 77123-1965 plastic. Material testing. Determination of flexural properties

Korean Agency for Technology and Standards (KATS)

KS L 3518-2017 Testing method for permanent of linear change on light weight castable refractories
KS I 3546-2022 Performance test methods for evaluating the reduction of volatile organic compound and aldehyde by building material — Solid phase building material
KS L 3505-1982 TESTING METHOD FOR PERMANENT OF LINEAR CHANGE ON CASTABLE REFRACTORIES
KS K 0145-2008 Test method for intercompatibility of basic dyes for acrylic fibers
KS I 3547-2012(2017) Performance test methods for evaluating the reduction of VOCs(volatile organic compounds) and aldehyde concentrations by building material－Liquid phase building material
KS M ISO 8987:2016 Plastics－Phenolic resins－Determination of reactivity on a B-transformation test plate
KS M ISO 8987:2010 Plastics-Phenolic resins-Determination of reactivity on a B-transformation test plate
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M 6785-2017 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M ISO 6259-1-2021 Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS M 6785-2017(2022) Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-1999 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS L 3518-2017(2022) Testing method for permanent of linear change on light weight castable refractories
KS L 5505-2021 Testing method for permanent linear change on high alumina and fireclay plastic refractories
KS L 3518-1987 Testing method for permanent of linear change on light weight castable refractories
KS B 0950-2019 Metallic materials－Instrumented indentation test for indentation tensile properties
KS R 9195-2009 Insulating materials of insulated rail joint－Test methods
KS M 6785-2022 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS L 3123-2006 Testing method for hydration resistance of basic brick
KS M ISO 14523-2007 Photography－Processed photographic materials－Photographic activity test for enclosure materials
KS M 6785-1994 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS L 9016-2022 Test methods for thermal transmission properties of thermal insulations
KS L 3518-2022 Testing method for permanent of linear change on light weight castable refractories
KS L 3409-2020 Test methods for physical properties of graphite materials
KS L 5505-2006(2021) Testing method for permanent linear change on high alumina and fireclay plastic refractories
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties

British Standards Institution (BSI)

BS ISO 23706:2020 Plastics. Determination of apparent activation energies of property changes in standard weathering test methods
BS EN 61000-4-28:2000 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Variation of power frequency, immunity test
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
19/30391462 DC BS ISO 23706. Plastics. Determination of apparent activation energies of property changes in standard weathering test methods
BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Determination of resistance to freezing and thawing
BS CWA 15261-3:2005 Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in creep testing
BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to disintegration of Lightweight Aggregates
BS 2782-1 Method 131B:1983 Methods of testing plastics - Thermal properties - Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet
BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
BS EN 14343:2005(2010) Rotary positive displacement pumps - Performance tests for acceptance
BS EN IEC 60794-1-219:2022 Optical fibre cables - Generic specification. Basic optical cable test procedures. Material compatibility test, method F19
BS ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Test conditions for pipes of various materials
BS 5N 100-2:2018 Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results
PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing of Lightweight aggregates

CZ-CSN

CSN 72 5035-1979 Test of fired ceramic materials. Definition of íliG iesislance to temperature change

Standard Association of Australia （SAA）

IEC 63177:2024 Test methods for compatibility of construction materials with electrical insulating liquids
AS 1580.403.2:2006 Paints and related materials - Methods of test - Abrasion resistance
AS 1180.6:1972 Methods of test for hose made from elastomeric materials - Impulse test
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test - Scratch resistance
AS/NZS 1580.481.1.5:1999 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Change in gloss
AS 1580.408.4:2004 Paints and related materials - Methods of test - Adhesion (crosscut)
AS 1180.3:1972 Methods of test for hose made from elastomeric materials - Accelerated ageing
AS 1774.35:2007 Refractories and refractory materials - Physical test methods - Guide to the determination of resistance to corrosive reagents
AS 1145.3:2001 Determination of tensile properties of plastics materials - Test conditions for films and sheets

Japanese Industrial Standards Committee (JISC)

JIS A 1489:2022 Measuring method of the thermal storage properties for building materials using phase change materials
JIS R 2576:2009 Method of test for permanent linear change on high alumina and fireclay plastic refractories
JIS R 2577:1981 Testing method for the rate of linear change of high alumina and fire clay plastic refractories
JIS R 2554:1976 Method of test for permanent linear change on castable refractories
JIS R 2555:1981 Testing method for the rate of linear change of castable refractories
JIS R 2576:1976 Method of test for permanent linear change on high alumina and fireclay plastic refractories
JIS R 2555 AMD 1:2005 Testing method for the rate of linear change of castable refractories (Amendment 1)
JIS K 7617:1998 Photography -- Processed photographic materials -- Photographic activity test for enclosure materials
JIS R 2654:1975 Method of test for permanent linear change on light weight castable refractories
JIS R 2554 AMD 1:2005 Method of test for permanent linear change on castable refractories (Amendment 1)

SE-SIS

MNC 323 E-1987 Metallic materials - Testing - Elevated temperature properties. Creep properties. Relaxation - Summary
MNC 323-1987 Metallic materials — Testing — Elevated temperature properties. Creep properties. Relaxation — Summary

Association of German Mechanical Engineers

DVS 2203-4-1997 Testing of welded joints of thermoplastics plates and tubes - Tensible creep test
DVS 2203-4 Beiblatt 1-2001 Testing of welded joints of thermoplastic sheets and pipes - Tensile creep test - Testing of socket joints

GM Daewoo

GMKOREA EDS-T-7934-2013 Test method for compatibility of plastics and rubber
GMKOREA EDS-T-7189-2003 Plastic strain ratio test method for thin metal materials

European Committee for Standardization (CEN)

EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
EN ISO 8987:1995 Plastics - Phenolic Resins - Determination of Reactivity on a B- Transformation Test Plate (ISO 8987 : 1988)
EN ISO 8987:1998 Plastics - Phenolic Resins - Determination of Reactivity on a B- Transformation Test Plate (ISO 8987 : 1988) ISO 8987:1995

(U.S.) Ford Automotive Standards

FORD FLTM BI 002-04-2001 PAINT COMPATIBILITY TEST
FORD FLTM BJ 012-02-2001 VACUUM DIAPHRAGM COMPATIBILITY TEST

American National Standards Institute （ANSI)

ANSI/ASTM D5642:2009 Test Method For Sealed Tube Chemical Compatibility Test
ANSI/ASTM F2331:2011 Test Method For Determining Chemical Compatibility Of Thread Sealants With Thermoplastic Threaded Pipe And Fittings Materials
ANSI/ASTM F1534M:1996 Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials after Water Leaching
ANSI/ICEA T-28-562-2003 Test Method For Measurement of Hot Creep of Polymeric Insulations

Danish Standards Foundation

DS 1103.8:1982 Test methods for rigid flat sheets. Dimensional changes associated with changes in relative humidity
DS/EN ISO 6259-1:2002 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
DS/ISO 6444:1982 Door leaves. Test of behaviour under humidity variations (successive uniform climates)
DS/EN 14343:2006 Rotary positive displacement pumps - Performance tests for acceptance
DS/EN 14343/AC:2008 Rotary positive displacement pumps - Performance tests for acceptance

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO M344-1992 Compatibility test method of automotive gear oil with rubber seal materials

FI-SFS

SFS 3440-1979 plastic pipe. Capacity endurance testing
SFS 3144-1980 plastic pipe. Temperature change test

NATO - North Atlantic Treaty Organization

AEP-33(B)-2006 GUIDE TO METHODS OF TEST FOR THE COMPATIBILITY OF MATERIALS USED IN ENVIRONMENTS OXYGEN-ENRICHED (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 70
AEP-33-2001 Guide to Methods of Test for the Compatibility of Materials Used in Oxygen Rich Environments (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 –

Association Francaise de Normalisation

NF EN 1367-1:2007 Tests to determine the thermal properties and alterability of aggregates - Part 1: determination of freeze-thaw resistance
NF P18-653-2:1998 Tests for thermal and weathering properties of aggregates. Part 2 : magnesium sulfate test.
NF EN 1367-5:2011 Tests to determine the thermal properties and alterability of aggregates - Part 5: determination of resistance to thermal shock
NF C91-004-28*NF EN 61000-4-28:2000 Electromagnetic compatibility (EMC) - Part 4-28 : testing and measurement techniques - Variation of power frequency, immunity test
NF T70-531:2003 Energetic materials for defense - Safety, vulnerability - Vacum test with mercury tube
NF T54-955-1*NF EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method
NF T70-331:2004 Energetic materials for defense - Physical-chemical analysis and properties - Volume variation measurement in a tensile test by Farris gas dilatometer
NF P18-653-2*NF EN 1367-2:2010 Tests for thermal and weathering properties of aggregates - Part 2 : magnesium sulphate test.
NF P98-232-4:1994 Tests relating to pavements. Determination of the mechanical characteristics on material bound with hydraulic binders. Part 4 : flexural test.
NF P18-653-8*NF EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8 : determination of resistance to disintegration of Lightweight Aggregates

International Federation of Trucks and Engines

NAVISTAR MPAPS BT-28-2014 Compatibility and Dispersibility Test
NAVISTAR CEMS GT-16-2015 VOID - Chromic Acid Compatibility Test
NAVISTAR CEMS BT-28-2014 VOID - Compatibility And Dispersibility Test

SG-SPRING SG

SS 381-1996 Materials And Performance Tests For Aluminium Curtain Walls

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1026-1995 Test methods for determination of compatibility of materials with conductive polymeric insulation shields and jackets

Society of Automotive Engineers (SAE)

SAE J1325-2011 Test Method for Measuring the Relative Drapeability of flexible insulation Materials

SAE - SAE International

SAE J1325-1980 Test Method for Measuring the Relative Drapeability of Flexible Insulation Materials

Insulated Cable Engineers Association （ICEA)

ICEA T-28-562-2003 TEST METHOD FOR MEASUREMENT OF HOT CREEP OF POLYMERIC INSULATIONS

VN-TCVN

TCVN 6530-13-2008 Refractiories.Test methods.Part 13: Determination of oxidation resistance of refractories containing carbon

AENOR

UNE-EN 14343:2007 Rotary positive displacement pumps - Performance tests for acceptance

AT-ON

ONORM A 1216-2-1998 Testing of printability of printing material -Characteristic quantities for the standardizationof mechanical properties of absorbent printing material

GM North America

GM GM4495M-1995 Exterior Topcoat Compatibility Testing

RU-GOST R

GOST R 57750-2017 Polymer composites. Test method for creep properties of adhesives in shear

Lithuanian Standards Office

LST EN 14343-2006/AC-2008 Rotary positive displacement pumps - Performance tests for acceptance
LST EN 14343-2006 Rotary positive displacement pumps - Performance tests for acceptance

NEMA - National Electrical Manufacturers Association

NEMA LSD 63-2012 Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and Systems

North Atlantic Treaty Organization Standards Agency

STANAG 7046-2007 GUIDE TO METHODS OF TEST FOR THE COMPATIBILITY OF MATERIALS USED IN OXYGEN-ENRICHED ENVIRONMENTS - AEP-33(B)

RO-ASRO

STAS 9676-1974 FLEXIBLE CELLULAR MATERIALS Test to accelerated ageing

ES-UNE

UNE-CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation (Endorsed by AENOR in May of 2016.)

Others: