AC and DC withstand voltage insulation tester

AC and DC withstand voltage insulation tester, Total:220 items.

The international standard classification for "AC and DC withstand voltage insulation tester" includes: Electrical insulation in general , Electrical engineering in general , Electrical accessories in general , Insulating materials in general , Insulation , Substations. Surge arresters , Insulators , Bushings , Rotating machinery in general , Other standards related to electricity and magnetism , Other electrical accessories .

The Chinese standard classification for "AC and DC withstand voltage insulation tester" includes: Basic standards and general methods , Electric transmission and transformation equipment in general , Insulator , Electric power testing technique , Electric rotating machinery in general , Electrical insulating material and its products , Electric transmission line and equipment , , High voltage switchgear .

Professional Standard - Electricity

DL/T 1474-2015 Hyhibicity Measuring Method of Composite Insulator for AC and DC Overhead Lines with a Normal Voltage Greater Than 1000V
DL/T 859-2015(英文版) Artificial contamination test of composite insulators for high-voltage AC systems
DL/T 474.2-2006 Guide for insulation test on site DC high voltage test
DL/T 474.4-2018 Guide for insulation test on site AC voltage withstanding test
DL/T 1247-2013 Icing Flashover Test Methods on High Voltage Insulators to Be Used in DC System
DL/T 605-1996 Guide for insulation coordination of HVDC convertor stations
DL/T 474.2-2018 Guide for insulation test on site DC high voltage test
DL/T 474.4-2006 Guide for insulation test on site AC voltage withstanding test
DL/T 859-2004 Artificial pollution tests on composite insulators used on high-voltage AC systems
DL 474.4-1992 Guidelines for Implementation of On-Site Insulation Tests AC Withstand Voltage Test
DL/T 1015-2006 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 859-2015 Artificial Pollution Tests on Composite Insulators Used on High-votage AC Systems
DL/T 1902-2018 Installation, operation and maintenance specification of a.c. and d.c. composite hollow insulators with high voltage
DL 474.2-1992 Implementation guidelines for on-site insulation test DC high voltage test
DL/T 1474-2021 Hydrophobicity measurement and criterion of high voltagepolymeric insulators for a.c. and d.c. systems
DL/T 1015-2019 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 1580-2021 Technical specification for core of composite insulators in a.c. or d.c. system

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

未注明发布机构

IEEE Std 95-2002(R2007) IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
IEEE Std 433-2022 IEEE Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low Frequency - Redline

Group Standards of the People's Republic of China

T/ZZB 0706-2018 Live working–Adjustable wrenches for use up to 1 kV a.c. and 1.5 kV d.c.
T/CEC 349-2020 Guidelines for Insulation Coordination of Flexible Interconnected AC and DC Power Distribution Systems
T/CEC 183-2018 Technical specifications for high voltage AC and DC hollow composite insulators
T/GDWCA 0009-2018 XLPE extruded insulation DC high voltage cable
T/ZZB 1132-2019 Live working - insulation screwdriver for use up to 1000V AC and 1500V DC
T/CSEE 0231-2021 Guidelines for on-site AC withstand voltage test of XLPE insulated power cables

Professional Standard - Machinery

JB/T 9615.1-2000 test methods of the interturn insulation on random wound winding for ac low-voltage machines
JB/T 7082-2013 Dielectric voltage-withstand tester
JB/T 9615.2-2000 test limits of the interturn insulation on random wound winding for ac low-voltage machines
JB/T 6204-2002 Specifications for Withstanding Voltage Test Oil Stator Coil and
JB/T 7082-1993 Dielectric Withstand Testing Instruments for Insulating Medium

Professional Standard - Energy

DL/T 1244-2021 Artificial icing flashover test methods on high voltage insulators to be used in AC/DC system
NB/T 10450-2020 Insulating liquids-determination of the breakdown voltage at direct current field

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 29311-2012 Electrical insulating materials—A.C.voltage endurance evaluation—Introduction
GB 18269-2000 Insulating hand tools for live working up to 1 000 V a. c. and 1 500 V d. c.
GB/T 4585-2004 Artificial pollution tests on high-voltage insulators to be used on a.c.systems
GB/T 18269-2008 Live working-Hand tools for use up to 1kV a.c .and 1.5kV d.c.
GB/T 28541-2012 Insulation co-ordination for equipments of ±800 kV high voltage direct current converter stations
GB/T 311.3-2007 Insulation coordination - Part 3: Procedures for high-voltage direct current (HVDC) converter stations
GB/T 22714-2008 Test specifications of interturn insulation of form-wound winding for AC low-voltage electrical machines
GB/T 22707-2008 Artificial pollution tests on high-voltage insulators to be used on d.c. systems
GB/T 4109-2008 Insulated bushings for alternating voltages above 1 000V
GB/T 311.14-2024 Insulation co-ordination—Part 14: Insulation co-ordination for AC/DC filters of HVDC system

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 311.3-2017 Insulation co-ordination―Part 3:Procedures for high-voltage direct current(HVDC) converter stations
GB/T 34937-2017 Insulators for overhead lines-Composite suspension and tension insulators for d.c. systems with a nominal voltage greater than 1 500 V-Definitions,test methods and acceptance criteria

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 29311-2020 Electrical insulating materials and systems—AC voltage endurance evaluation
GB/T 4109-2022 Insulated bushings for alternating voltages above 1 000 V

国家能源局

NB/T 10450-2025 Determination of DC electric field breakdown voltage of insulating liquids
NB/T 42105-2016 Basin insulator for high-voltage alternating current gas-insulated metal-enclosed switchgear

Taiwan Provincial Standard of the People's Republic of China

CNS 7367-1981 Method of Test for D.C. Resistance or Conductance of Insulating Materials
CNS 9808-1983 Method of Test for Control Gear Insulation

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3610-1999 Calibration procedures for AC and DC voltage converters

Professional Standard - Agriculture

JB/Z 293-1987 AC high voltage motor stator winding insulation test specification

RU-GOST R

GOST 26130-1984 Electrical insulating paper. Methods for determination of electrical strength at alternating (frequency of 50 Hz) and constant voltage
GOST 6433.3-1971 Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage

RO-ASRO

STAS 11119-1978 COMBINED-VOLTAGES TEST OF SELF-RESTORING INSULATION. General requirements
STAS 3686/3-1974 CIRCUIT-BREAKERS FOR ALTER- NATING VOLTA GES ABOVE 1 kV Methods for testing the [insulation
STAS 6415/1-1990 Solid electric insulating materials. Determination of low voltage arc resistance in direct current

Institute of Electrical and Electronics Engineers (IEEE)

ANSI/IEEE Std 95-1977 IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage
IEEE Std 95-2002 IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
IEEE 95-1977 Recommended practice for insulation testing of large ac rotating machinery with high direct voltage
IEEE 95-2002 Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage
IEEE Std 433-2009 IEEE Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low Frequency - Redline
IEEE Unapproved Draft Std P433/D16 Oct 2009 Draft Recommeded Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
IEEE Unapproved Draft Std P433/D15 Sept 2009 Draft Recommeded Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency

SCC

IEC TS 61251:1993 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
DANSK DS/EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
CEI EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
AENOR UNE 21201 IN:1999 Artificial contamination tests of high voltage insulators intended for direct current networks.
DIN EN 61251 E:2014 Draft Document - Electrical insulating materials - A.C. voltage endurance evaluation (IEC 112/294/CDV:2014); German version FprEN 61251:2014
DIN IEC /TS 62896:2016 Hybrid insulators for a.c. and d.c. high-voltage applications - Definitions, test methods and acceptance criteria (IEC/TS 62896:2015)
AENOR UNE-EN 60507:1995 Artificial contamination tests of high voltage insulators intended for alternating current networks.
CEI EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BS EN 60137:1996 Insulated bushings for alternating voltages above 1 kV
BS EN 60507:1993 Artificial pollution tests on high-voltage insulators to be used on a.c. systems
UNE 21201:1999 IN ARTIFICIAL POLLUTION TESTS ON HIGH-VOLTAGE INSULATORS TO BE USED ON D.C. SYSTEMS.
IEC TS 61467:1997 Insulators for overhead lines with a nominal voltage above 1000 V - A.C. power arc tests on insulator sets
IEC 60507:1975 Artificial pollution tests on high-voltage insulators to be used on a.c. systems
BS IEC 61467:1997 Insulators for overhead lines with a nominal voltage above 1000 V. AC power arc tests on insulator sets
DANSK DS/EN IEC 61462:2023 Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V – Definitions, test methods, acceptance criteria and design recomme...
AS 3608:1989 Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c.
DANSK DS/EN 60071-5:2015 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
CEI EN 60071-5:2015 Insulation co-ordination Part 5: Procedures for high-voltage direct current (HVDC) converter stations
AS 1137.1:1972 Insulators - Porcelain and glass insulators for overhead power lines (for voltages greater than 1000 V a.c.)
BS PD IEC TS 63042-101:2019 UHV AC transmission systems-Voltage regulation and insulation design
04/30111589 DC IEC 60137. Insulated bushings for alternating voltages above 1 000 V
AS 3609:1989 Insulators - Porcelain stay type - Voltages greater than 1000 V a.c.
BS EN 61557-2:1997 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring ormonitoring of protective measures-Insulation resistance
CEI EN 61557-2:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
CEI EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and highcurrent tests Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

European Committee for Electrotechnical Standardization（CENELEC）

EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...
EN 60071-5:2015 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

ES-UNE

UNE-EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation (Endorsed by AENOR in April of 2016.)
UNE-EN 60071-5:2015 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
UNE-EN IEC 62772:2023 Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria (Endorsed by Asociación Española de Normalización in February of 2024.)
UNE-EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (Endorsed by Asociación Española de Normalización in May of 2021.)

Association Francaise de Normalisation

NF C26-351*NF EN 61251:2016 Electrical insulating materials and systeme - A.C. voltage endurance evaluation
NF EN 61251:2016 Electrical insulating systems and materials - Evaluation of endurance to alternating voltage
NF C26-227:1992 METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS. PART 2 : ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE.
NF EN 61621:1998 Dry Solid Insulating Materials - High Voltage, Low Current Arc Discharge Resistance Test
NF C66-550:2004 Insulated bushings for alternating voltages above 1 000 V.
NF C66-550:1996 Insulated bushings for alternating voltages above 1 kv.
NF C66-367*NF EN 61467:2009 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
NF C66-010*NF EN 60507:1993 Artificial pollution tests on high-voltage insulators to be used on A.C. systems.
NF C10-100-5*NF EN 60071-5:2015 Insulation co-ordination - Part 5 : procedures for high-voltage direct current (HVDC) converter stations
NF EN IEC 61462:2023 Hollow composite insulators - Insulators with or without internal pressure for use in electrical equipment with rated alternating voltages greater than 1,000 V and direct voltages greater than 1,500 V - Definitions, me...
NF C41-083-3:2021 Instruments and software used for measurement in high-voltage and high current tests - Part 3 : requirements for hardware for tests with alternating and direct voltages and currents
NF EN IEC 62772:2023 Isolateurs supports composites creux présentant une tension alternative supérieure à 1 000 V et une tension continue supérieure à 1 500 V - Définitions, méthodes d'essai et critères d'acceptation
NF C66-309*NF EN 61109:2009 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria

IEC - International Electrotechnical Commission

IEC 60438:1973 Tests and Dimensions for High-Voltage D.C. Insulators (Edition 1.0)
TS 61251-2008 Electrical insulating materials – A.C. voltage endurance evaluation – Introduction (Edition 2.0)
TS 62896-2015 Hybrid insulators for a.c. and d.c. high-voltage applications – Definitions@ test methods and acceptance criteria (Edition 1.0)
TS 61251-1993 Electrical Insulating Materials - A.C. Voltage Endurance Evaluation - Introduction (Edition 1.0)

British Standards Institution (BSI)

BS EN 61251:2016 Electrical insulating materials and systems. A.C. voltage endurance evaluation
BS 7808:1995 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS EN 60071-5:2015 Insulation co-ordination. Procedures for high-voltage direct current (HVDC) converter stations
PD IEC/TS 62896:2015 Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria
BS EN IEC 61462:2023 Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V. Definitions, test methods, acceptance criteria and design…
IEC 61462:2023 Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V. Definitions, test methods, acceptance criteria and design…
BS PD IEC/TS 62896:2015 Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria
BS DD IEC/TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS IEC 62896:2024 Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC. Definitions, test methods and acceptance criteria
BS EN 60137:2003 Insulated bushings for alternating voltages above 1000 V
BS EN 60137:2009 Insulated bushings for alternating voltages above 1000 V
BS EN 60137:2008 Insulated bushings for alternating voltages above 1000 V
BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 60243-2:2001 Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage
BS EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Insulation resistance
BS EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for hardware for tests with alternating and direct voltages and currents
BS 7744:1994 Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems
PD IEC TS 63042-101:2019 UHV AC transmission systems. Voltage regulation and insulation design
BS EN IEC 62772:2023 Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria

GSO

GSO IEC 61975:2014 High-voltage direct current (HVDC) installations - System tests
BH GSO IEC TS 62896:2023 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
GSO IEC TS 62896:2023 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
GSO IEC/TS 61245:2014 Artificial pollution tests on high-voltage insulators to be used on d.c. systems
DL/T 474.2-1992 Guidelines for the implementation of on-site insulation tests - DC high voltage tests
BH GSO IEC/TS 61245:2016 Artificial pollution tests on high-voltage insulators to be used on d.c. systems
GSO IEC 61621:2015 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BH GSO IEC 61621:2016 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
GSO IEC 61109:2014 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
OS GSO IEC 60071-5:2014 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
BH GSO IEC 60071-5:2016 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
GSO IEC 60071-5:2014 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
BH GSO IEC 61083-3:2023 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
GSO IEC 61083-3:2023 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

International Electrotechnical Commission (IEC)

IEC 61251:2015 Electrical insulating materials and systems - AC voltage endurance evaluation
IEC TR 60438:1973 Test and dimensions for high-voltage d.c. insulators
IEC TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
IEC TR2 61251:1993 Electrical insulating materials; A.C. voltage endurance evaluation; introduction
IEC TS 61245:1993 Artificial pollution tests on high-voltage insulators to be used on d.c. systems
IEC TR2 61245:1993 Artificial pollution tests on high-voltage insulators to be used on d.c. systems
IEC TS 61245:2015 Artificial pollution tests on high-voltage insulators to be used on d.c systems
IEC 60137:2017 Insulated bushings for alternating voltages above 1000 V
IEC 60137:2008 Insulated bushings for alternating voltages above 1000 V
IEC 60137:2003 Insulated bushings for alternating voltages above 1000 V
IEC 60507:1991 Artificial pollution tests on high-voltage insulators to be used on a.c. systems
IEC 60137:2017 RLV Insulated bushings for alternating voltages above 1000 V
IEC TR2 61467:1997 Insulators for overhead lines with a nominal voltage above 1000 V - A.C. power arc tests on insulator sets
IEC TS 61245:2015/COR1:2018 Artificial pollution tests on high-voltage insulators to be used on d.c systems; Corrigendum 1
IEC 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria

KR-KS

KS C IEC 61251-2019 Electrical insulating materials and systems — AC voltage endurance evaluation
KS C IEC 60137-2020 Insulated bushings for alternating voltages above 1 000 V

Korean Agency for Technology and Standards (KATS)

KS C IEC 61251:2019 Electrical insulating materials and systems — AC voltage endurance evaluation
KS C IEC 61251:2002 Electrical insulating materials－A.C. voltage endurance evaluation－Introduction
KS C 2129-1996(2001) TESTING METHODS FOR DC RESISTANCE OR CONDUCTANCE OF INSULATING MATERIALS
KS C IEC 60137:2020 Insulated bushings for alternating voltages above 1 000 V
KS C IEC 60137:2013 Insulated bushings for alternating voltages above 1 000 V
KS C IEC 61467-2014(2019) Insulators for overhead lines — Insulator strings and sets for lines with a nominal voltage greater than 1 000 V — AC power arc tests
KS C IEC 60507:2005 Artificial pollution tests on high-voltage insulators to be used on A.C. systems
KS C 2130-1996(2021) Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C IEC 61952:2003 Insulators for overhead lines-Composite line post insulators for alternative current with a nominal voltage > 1 000 V

Indonesia Standards

SNI 04-6541-2001 Test and dimensions for high-voltage d.c. insulators
SNI IEC 60137:2013 Insulated bushings for alternating voltages above 1 000 V
SNI 04-6545.2-2001 Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective meaures. Part 2: Insulation resistance

German Institute for Standardization

DIN 43167-3:1987 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator
DIN EN 60507:1994 Artificial pollution tests on high-voltage insulators to be used on a.c. systems (IEC 60507:1991); German version EN 60507:1993
DIN 43167-3:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator
DIN 43188:1980 Insulators for overhead equipment, 1000 V a.c./1500 V d.c.; mounting dimensions
DIN EN 61109:2009 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria (IEC 61109:2008); German version EN 61109:2008
DIN 43167-1:1987 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; assembly
DIN EN 61557-8:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measurers - Part 8: Insulation monitoring devices for IT systems (IEC 61557-8:2007 + Corrigendum 2007-05

American National Standards Institute （ANSI)

ANSI/IEEE 95:2002 Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage

BSI

DANSK DS/EN IEC 62896:2024 Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC – Definitions, test methods and acceptance criteria

CZ-CSN

CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc
CSN 34 6460-1983 Methods of test for the determination of the d. c. insulation resistance of solid insulating materials
CSN 34 8031 Z1-1997 AC high voltage insulator test in artificial pollution
CSN 35 1088-1984 Power transformers. Methods for insulation electrical strength tests under alternating voltage
CSN 34 8031-1994 Artificial pollution tests on high-voltage insulators to be used on a.c. systems
CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE V 0674-12-2016 Hybrid insulators for a.c. and d.c. high-voltage applications - Definitions@ test methods and acceptance criteria (IEC/TS 62896:2015)
VDE 0303-251-2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation (IEC 61251:2015); German version EN 61251:2016

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1898-2016 High-Voltage Direct-Current (HVDC) Composite Post Insulators
IEEE 402-1974 Guide for Measuring Resistivity of Cable-Insulation Materials at High Direct Voltages

CENELEC - European Committee for Electrotechnical Standardization

EN 60507:1993 Artificial Pollution Tests on High-Voltage Insulators to Be Used on A.C. Systems
EN 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions@ test methods and acceptance criteria

Danish Standards Foundation

DS/EN 60507:2009 Artificial pollution tests on high-voltage insulators to be used on a.c. systems
DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

Standard Association of Australia （SAA）

AS 4435.1:1996 Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. - Definitions, test methods and acceptance criteria for string insulator units
AS 4435.1:1996(R2016) Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. - Definitions, test methods and acceptance criteria for string insulator units

BE-NBN

NBN-EN 60507-1993 Artificial pollution tests on high-voltage insulators to be used on a.c. systems

ZA-SANS

SANS 60137:2004 Insulated bushings for alternating voltages above 1 000 V
SANS 60137:2010 Insulated bushings for alternating voltages above 1 000 V
SANS 61467:1997 Insulators for overhead lines with a nominal voltage above 1 000 V - AC power arc tests on insulator sets

Japanese Industrial Standards Committee (JISC)

JIS C 2110-2:2010 Solid electrical insulating materials -- Test methods for electric strength -- Part 2: Tests using direct voltage
JIS C 2110-2:2016 Solid electrical insulating materials -- Test methods for electric strength -- Part 2: Tests using direct voltage

SE-SIS

SIS SS IEC 137:1982 Insulators — Bushings for alternating voltages above 1000 V

Lithuanian Standards Office

LST EN 60507-2001 Artificial pollution tests on high-voltage insulators to be used on a.c. systems (IEC 60507:1991)

HU-MSZT

MNOSZ 8398-1956 Metallic paper for DC generator and transformer insulation

BR-ABNT

ABNT 19-2.1-003-1980 Pressure resistance test of insulating refractory bricks at normal temperature

YU-JUS

JUS N.S5.607-1985 Die/ectric strength tests ofultrasonlc medlcal dlagnostfc eguipment

IN-BIS

IS 8704-1978 Test method for artificial contamination of high-voltage insulators used in AC systems

NL-NEN

NEN 10507-1993 Artificial pollution of high-voltage insulators for a.c. systems (IEC 507:1991)

PL-PKN

PN E04443-1965 Solid elec?rical insula?ing ma?erials Testing of highcurrent and lowvol?age arc resis?ance
PN G08011 ArkusZ02-1973 Insulating oxygen apparatus Specifications and testing

Others: