Temperature and humidity alternating test

Temperature and humidity alternating test, Total:435 items.

The international standard classification for "Temperature and humidity alternating test" includes: Surface treatment and coating in general , Environmental testing , Plastics , Paints and varnishes , Rubber , Navigation and control equipment , Commercial refrigerating appliances , Optical equipment , Mechanical testing of metals , On-board equipment and instruments , Packaging and distribution of goods in general , Electrical and electronic testing , Connecting devices , Braking systems , Measurement of electrical and magnetic quantities , Mechanical testing , Buildings and installations for processing and storage of agricultural produce .

The Chinese standard classification for "Temperature and humidity alternating test" includes: Material Protection , Material composition analysis instrument and environment detection instrument in general , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Basic standard and general method for coating , Rubber products in general , Temperature and pressure instrument , Refrigeration equipment , Optical instrument in general , Metal mechanical property test method , Life-support system and equipment , Metal physical and chemical property test method in general , Packaging method , Sensitive component and sensor , Technical management , Thermal Measurement , Micro and copier machinery , Electrician alloy parts , Environmental Condition and General Test Method , Other non-metal mine product , Electric energy measurement and load control system , Mechanical vibration, impact equipment and dynamic balancing machine , Basic standards and general methods , Ambient conditions , Agricultural products and feed processing machinery , Chemical Measurement .

Professional Standard - Aerospace

QJ 1323.4-1987 Electromagnetic relay test method alternating damp heat test
QJ 1177.18-1987 Environmental test methods for ground-to-air and ship-to-air missile weapon systems Temperature humidity vibration low pressure test
QJ 1238.4-1987 Alternating Damp Heat Test of Cable Test Method on Missile Launch Vehicle
QJ 481-1990 Test Method for Alternating Humid Heat Resistance of Metal Clad Sheet

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
GB/T 2423.65-2024 Environmental testing—Part 2: Test methods—Test : Combined salt mist/temperature/humidity/solar radiation
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products－Test Db: Damp heat, cyclic
GB/T 6803-1986 Standard method for conducting drop weight test to determine nil ductility transition temperature of ferritic steels
GB/T 2423.34-2012 Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test
GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods - Test N: Change of temperature
GB/T 2423.34-2005 Environmental testing for electric and electronic products - Part 2: Test methods - Test Z/AD: Composite temeperature/humidity cyclic test
GB/T 30103.1-2013 Methods of Testing for Thermal Performance on Cold Store - Part 1: Temperature and Humidity Testing
GB/T 2423.34-1986 Basic environmental testing procedures for electric and electronic products--Test Z/AD: Composite temperature/humidity cyclic test
GB/T 2424.13-1981 Electric and electronic products--Basic environmental test regulations for electricians--Guidelines for temperature variation tests
GB/T 11606.5-1989 The method of environmental test for analytical instruments--Change of temperature test
GB/T 6803-2008 Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
GB/T 5170.18-1987 Inspection methods for basic parameters of environmental testing epuipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 6803-2023 Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
GB/T 2424.27-2013 Environmental testing―Supporting documentation and guidance―Calculation of uncertainty of conditions in climatic test chambers
GB/T 2423.34-2024 Environmental testing—Part 2:Test methods—Test Z/AD: Composite temperature/humidity cyclic test
GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat，cyclic ( 12h+12h cycle)
GB/T 2941-1991 Standard temperature, humidity and time for environmental regulation and testing of rubber samples
GB/T 44911-2024 Aircraft equipment—Environmental and operating conditions for airborne equipment—Humidity,temperature and pressure tests
GB 9278-1988 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 4857.2-2005 Packaging—Basic tests for transport packages—Part 2:Temperature and humidity conditioning
GB/T 5170.18-2005 Inspection methods for basic paratmeters of environmental testing equipments for electric and electronic products - Composite temperature/humidity cyclic testing equipments
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 9278-2008 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 1634-1979 Test method of heat deflection temperature underbending load for plastics
GB/T 2424.6-2006 Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers
GB/T 2424.13-2002 Environmental testing for electric and electronic and electronic products - Part 2: Test methods - Guidance on change of temperature tests
GB/T 2423.22-2002 Environmental testing for electric and electronic products - Part 2: Test methods Test N: Change of temperature
GB/T 15309-1994 Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel
GB/T 5170.18-2022 Inspection methods for environmental testing equipments—Part 18：Composite temperature/humidity cyclic testing equipments

Military Standard of the People's Republic of China-General Armament Department

GJB 4.6-1983 Environmental test of ship electronic equipment, alternating damp heat test
GJB 150.19-1986 Environmental test methods for military equipment temperature-humidity-altitude test
GJB 595.8-1988 Environmental test methods for artillery optical instruments Temperature-humidity-vibration test
GJB 5020-2003 Calibration method for comprehensive temperature, humidity and vibration test equipment
GJB 23.3-1984 Sonar transducer temperature mutation test
GJB 715.10-1990 Fastener test method humidity
GJB 150.24A-2009 Laboratory environmental test methods for military materiel - Part 24: Temperature- humidity-vibration-altitude test
GJB 573.2-1988 Fuze environment and performance test methods Temperature and humidity test
GJB 150.24-1992 Environmental test methods for military equipment Temperature-humidity-vibration-height test
GJB 797.16-1990 Environmental test methods for mine blasting equipment - alternating damp heat test

Professional Standard - Electron

SJ/T 10187-1991 Climate testing equipment - Series of temperature changing for test chamber(one chamber) for Type Y73
SJ 20833-2002 Specification of temperature-humidity transmitter for type WSS-001
SJ/Z 9001.4-1987 Basic environmental testing procedures--Part 2: Tests--Test N: Change of temperature
SJ/Z 9001.35-1987 Basic environmental testing procedures--Part 2: Tests--Guidance on change of temperature tests
SJ/T 10186-1991 Climate testing equipment-Series of temperature changing for test chamber(chamber)for Type Y73
SJ/Z 9001.10-1987 Basic environmental testing procedures--Part 2: Tests--Test Z/AD: Composite temperature/humidity cyclic test
SJ 20115.4-1992 Environmental conditions and test methods for aircraft radar-Humidity/heat alteration test
SJ 2329-1983 Generic specification for temperature change test chambers

National Metrological Technical Specifications of the People's Republic of China

JJF 1101-2019 Calibration Specification of Environmental Testing Equipment for Temperature and Humidity Parameters
JJF 1298-2011 Program of Pattern Evaluation of High—Temperature Creep and Stress—Rupture Testing Machines
JJF 1101-2003 Calibration Specification for the Equipment of the Environmental Testing for Temperature and Humidity
JJF 1270-2010 Calibration Specification for Temperature/Humidity/Vibration Combined Environmental Testing System
JJF(纺织)104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity
JJF(纺织) 104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity

Professional Standard - Machinery

JB/T 9444.11-1999 Basic Environmental Testing Method of Copying Machines - Test H: Temperature/humidity Operation Test
JB/T 6862-1993 Hygrometer
JB/T 6862-2014 Thermohygrograph
JB/T 9444.10-1999 Basic Environmental Testing Method of Copying Machines - Test G: Temperature/humidity Comprehensive Test
JB/T 9444.5-1999 Basic Environmental Testing Method of Copying Machines - Test D: Cyclic Damp Heat Test
JB/T 7900-2002 Standard test method for change of resistance with temperature of high resistance alloys for electrical heating

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35472.6-2017 Test method for friction element of wet automatic transmission―Part 6:μ-PVT test method
GB/T 32065.7-2015 Environmental test methods for oceanographic instruments―Part 7:Damp heat,cyclic
GB/T 17215.9311-2017 Electricity metering equipment—Dependability—Part 311:Accelerated reliability testing—Elevated temperature and humidity

未注明发布机构

JEDEC JESD22-A101D.01-2021 JESD22-A101D.01 Balanced Temperature Humidity Bias Life Test Method
ASAE D309.1-1987(2017) Wet Bulb Temperature and Wet Bulb Decompression
JEDEC JESD22-A118B.01-2018 ACCELERATED MOISTURE RESISTANCE - UNBIASED HAST

Taiwan Provincial Standard of the People's Republic of China

CNS 13288-1993 Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests
CNS 12566-1993 Basic Environmental Testing Procedures Part 2: Tests, Test Z/AD:Composite Temperature/Humidity Cyclic Test
CNS 3633-1993 Basic Environmental Testing Procedures Part 2: Tests, Test N: Change of Temperature
CNS 15200-1-6-2007 Testing methods for paints - Part 1-6: General rule - Temperatures and humidities for conditioning and testing
CNS 12565-1989 Basic Environmental Testing Procedures Part 2: Tests, Test D _b : Damp Heat, Cycle (12+12-Hour Cycle)

Professional Standard - Agriculture

GB/T 44279-2024 Temperature-humdity-vibration-low pressure combined environmental testing system
SC/T 7002.4-1992 Environmental test conditions and methods for marine electronic equipment - alternating damp heat

Professional Standard - Aviation

HB 5830.16-1997 Environmental conditions and test methods for airborne equipment temperature-humidity-altitude
HB 6783.13-1993 Verification Methods for Climatic Environment Test Box (Chamber) for Military Airborne Equipment - Temperature-humidity-height Test Box (Chamber)
HB 6388-1990 Environmental conditions and test methods for airborne equipment Temperature-humidity-vibration
HB 7122.3-1994 Verification Methods for Climatic Environment Test Box (Chamber) for Civil Craft Airborne Equipment - Temperature and Humidity Test Box (Chamber)
HB 7591-1998 Verification Methods for Basic Parameters of Temperature, Humidity and Vibration Integrated Test System
HB 6167.3-1989 Environmental conditions and test methods for airborne equipment of civil aircraft Temperature change test

Group Standards of the People's Republic of China

T/QGCML 1573-2023 Temperature and humidity collector
T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
T/CEEIA 681-2023 Nuclear power electrical equipment—temperature and humidity composite test under charged conditions
T/QGCML 3956-2024 Semiconductor laboratory constant humidity and temperature test management platform
T/JAR 002/1-2021 Digital temperature and humidity recorder
T/QGCML 2029-2023 Laboratory temperature and humidity management specifications

Professional Standard - Aquaculture

SC/T 7002.4-1991 Environmental test conditions and methods for marine electronic equipment with alternating damp heat

Hebei Provincial Standard of the People's Republic of China

DB13/T 1702-2013 Digital display temperature and humidity meter test method

中华全国供销合作总社

GH/T 1098-2014 Seedcotton stack temperature and humidity monitoring instrument
GH/T 1099-2014 Testing method for temperature and humidity of seedcotton stack

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2424.6-2021 Environmental testing-Part 3:Supporting documentation and guidance- Confirmation of the performance of temperature/humidity chambers
GB/T 32065.8-2020 Environmental test methods for oceanographic instruments—Part 8:Change of temperature test
GB/T 2423.35-2019 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests

Professional Standard - Commodity Inspection

SN/T 2498.1-2010 Basic environmental testing procedures for import and export fireworks—Test Db:Damp heat,cyclic
SN/T 2498.3-2011 Basic Environmental Testing Procedure for the Import and Export Fireworks. Test Z/AD: Composite Temperature/Humidity Cyclic Test

National Metrological Verification Regulations of the People's Republic of China

JJG 276-2009 Verification Regulation of High-Temperature Creep and Stress-Rupture Testing Machines
JJG(建材) 129-1999 Safety Glass Temperature and Humidity Tester
JJG 276-1988 Verification Regulation of High-temperature Creep and Stress-Rupture Testing Machines
JJG 205-2005 Verification Regulation of Mechanical Thermo-hygrometers

农业农村部

SC/T 7002.4-2016 Fishery electronic equipment environmental test and methods- Damp heat, cyclic(Db)

Professional Standard - Ocean

HY 21.4-1992 The basic method of environmental test for oceanographic instruments - Guideline for temperature variation test

中国气象局

QX/T 16-2020 Calibration chambers for temperature and humidity instrument

Liaoning Provincial Standard of the People's Republic of China

DB21/T 1985-2012 Technical requirements for temperature and humidity control systems for mobile laboratories

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5494.17-2005 Test method of rifle grenade Part 17:Test for high temperature and high humidity
GJB 5389.15-2005 Test method of gun-launched missile Part 15:High temperature and high Humidity test

Guizhou Provincial Standard of the People's Republic of China

DB52/T 538-2008 Calibration Specifications for Temperature and Humidity Meters

工业和信息化部

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments

American National Standards Institute （ANSI)

ANSI/TIA/EIA 455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI/TIA-455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI/TIA-455-162-A-1999 FOTP-162 Optical Fiber Cable Temperature-Humidity Cycling
ANSI/ASTM E1171:2002 Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ANSI/ATIS 0600010-2014 Temperature, Humidity, & Altitude Standards

American Society for Testing and Materials (ASTM)

ASTM D6207-03(2007) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-97 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-97(2003) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03(2015) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03(2011) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D8042-16 Test Method for Shrinkage Temperature of Wet Blue and Wet White
ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D8042-18(2023) Test Method for Shrinkage Temperature of Wet Blue and Wet White
ASTM E337-84(1996)e1 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-02 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-15(2023) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D6207-03(2019) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM E2509-14 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM D8042-18 Test Method for Shrinkage Temperature of Wet Blue and Wet White
ASTM E2509-21 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM F1596-07 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
ASTM E1171-15(2019) Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM E1171-01 Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM E1171-15 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM D4714-96 Standard Test Method for Determination of Effect of Moist Heat (50% Relative Humidity and 90176C) on Properties of Paper and Board
ASTM E1171-99 Standard Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM D4714-96(2007) Standard Test Method for Determination of Effect of Moist Heat (50 % Relative Humidity and 90C) on Properties of Paper and Board
ASTM E1171-09 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM STP 919-1986 Drip weight test to determine the non-ductile transition temperature
ASTM D1043-16(2024) Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM E1171-04 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM D1043-10 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D5007-99(2013) Standard Test Method for Wet-to-Dry Hiding Change

Korean Agency for Technology and Standards (KATS)

KS C IEC PAS 62161:2002 Steady state temperature humidity bias life test
KS C 0227-2001 Basic environmental testing procedures-Part 2 : Tests-Test Db and guidance : Damp heat, cyclic(12+12-hour cycle)
KS C IEC PAS 62161-2002(2012) Steady state temperature humidity bias life test
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-38:2014 Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
KS C IEC 60068-2-38-2022 Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
KS C IEC 60068-2-38:2022 Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
KS C 6009-1992 Test methods for moisture resisrance of electronic components (Temperature/Humidity Cycling)
KS C IEC 60068-2-14-2014(2024) Environmental testing — Part 2-14: Tests — Test N: Change of temperature
KS C IEC 60068-2-33:2010 Environmental testing-Part 2:Tests-Guidance on change of temperature tests
KS C IEC 60068-2-33-2010 Environmental testing－Part 2：Tests－Guidance on change of temperature tests
KS C IEC 60068-2-14:2014 Environmental testing — Part 2-14: Tests — Test N: Change of temperature
KS C IEC 60068-2-39-2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C IEC 60068-2-39:2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS C 0225-2015 Basic environmental testing procedures- Part 2：Tests-Test N：Change of temperature
KS C 2140-2003(2023) Standards of testing method for phase transition temperature of ferroelectrics
KS C IEC PAS 62161-2013 Steady state temperature humidity bias life test
KS M ISO 3270:2002 Paints and varnishes and their raw materials－Temperature and humidities for conditioning and testing
KS M ISO 3270-2017 Paints and varnishes and their raw materials－Temperature and humidities for conditioning and testing
KS M ISO 3270:2022 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
KS M 3065-1982 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS C 0225-2001(2011) Basic environmental testing procedures- Part 2：Tests-Test N：Change of temperature
KS M ISO 3270:2017 Paints and varnishes and their raw materials－Temperature and humidities for conditioning and testing
KS C 0225-2001 Basic environmental testing procedures- Part 2:Tests-Test N:Change of temperature
KS M 3038-2013 Test method for tensile heat distortion temperature of plastic sheeting
KS M ISO 3270-2022 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
KS M 3065-2003 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS B 5344-1997(2022) Hygrometers-Test method
KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2011 Rubber－Temperature, humidities and times for conditioning and testing
KS R 9192-1996 Change of temperature testing method for parts of railway signaling
KS C 0228-2001 Basic environmental testing procedures - Part 2 : Tests, Test Z/AD : Composite temperature/humidity cyclic test
KS C IEC 60749-42-2016(2021) Semiconductor devices ― Mechanical and climatic test methods ― Part 42: Temperature and humidity storage
KS W ISO 9662-2018(2023) Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
KS C IEC 60749-42-2021 Semiconductor devices ― Mechanical and climatic test methods ― Part 42: Temperature and humidity storage
KS B 5344-1997 Hygrometers-Test method
KS W ISO 9662:2018 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
KS C IEC 60068-2-39-2023 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS D 0285-2005 Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS W ISO 9662-2018 Aircraft equipment－Environmental and operating conditions for airborne equipment－Humidity, temperature and pressure tests
KS C IEC 60749-42:2016 Semiconductor devices ― Mechanical and climatic test methods ― Part 42: Temperature and humidity storage
KS C IEC 60749-42-2016 Semiconductor devices ― Mechanical and climatic test methods ― Part 42: Temperature and humidity storage

GM North America

GM GM9131P-1994 Color Changes Due to Temperature or Humidity (Revision B)
GM GM9329P-2003 High Temperature Humidity Aging
GM GM9310P-1988 Variable Surface Temperature Heat Exposure Test

Standard Association of Australia （SAA）

AS 60068.2.38:2003 Environmental testing - Tests - Test Z/AD: Composite temperature/humidity cyclic test
AS 1099.2N:1981 Basic environmental testing procedures for electronics and telecommunications purposes, Part 2N: Tests - Change of temperature - Guidance on change of temperature test
AS 1683.20:2001 Methods of test for rubber - Standard temperatures, humidities and times for conditioing and testing
AS 1141.22:2008(R2016) Methods for sampling and testing aggregates - Wet/dry strength variation
AS 1141.22:2008 Methods for sampling and testing aggregates - Wet/dry strength variation
AS 1580.101.5:1986 Paints and related materials - Methods of test, Method 101.5: Conditions of test, temperature and humidity controlled
AS 1141.22:1996 Methods for sampling and testing aggregates, Method 22: Wet/dry strength variation
AS 1099.2NA:1981 Basic environmental testing procedures for electronics and telecommunications purposes, Part 2NA: Tests - Change of temperature - Rapid change of temperature, two-chamber method
AS 60068.2.14:2024 Environmental testing, Part 2.14: Tests - Test N: Change of temperature (IEC 60068-2-14:2023, MOD)
AS 1301.P416S:1982 Methods of test for pulp and paper - Determination of temperature and relative humidity of atmosphere for paper and paperboard testing
AS 1663:1974 Method for dropweight test for nil-ductility transition temperature of ferritic steels
AS 1580.101.5:1980 Methods of test for paints, varnishes, lacquers and related materials (metric units) - Conditions of test, temperature and humidity controlled
AS 2001.5.2:1995 Methods of test for textiles - Dimensional change - Determination of relaxation and hygral properties of woven fabrics
AS 2001.5.2:1995(R2016) Methods of test for textiles - Dimensional change - Determination of relaxation and hygral properties of woven fabrics
AS 1099.2N:1973 Basic environmental testing procedures for electrotechnology, Part 2N: Tests - Test N - Change of temperature - Guidance on change of temperature tests
AS K41.101.5:1971 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 101.5: Conditions of test, temperature and humidity controlled

International Electrotechnical Commission (IEC)

IEC PAS 62177:2000 Highly-accelerated temperature and humidity stress test (HAST)
IEC 60068-2-38:2021 RLV Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC PAS 62161:2000 Steady state temperature humidity bias life test
IEC 60068-2-38:1974 Environmental testing. Part 2: Tests. Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-38:2009 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
IEC 60068-2-14:1984 Basic environmental testing procedures. Part 2 : Tests. Test N: Change of temperature
IEC 60068-2-33:1971 Basic environmental testing procedures. Part 2 : Tests. Guidance on change of temperature tests
IEC 60068-2-14/AMD1:1986 Basic environmental testing procedures. Part 2 : Tests. Test N: Change of temperature
IEC 60068-2-33:1971/AMD1:1978 Basic environmental testing procedures. Part 2 : Tests. Guidance on change of temperature tests
IEC 60793-1-52:2014 Optical fibres - Part 1-52: Measurement methods - Change of temperature tests
IEC 60749-5:2003 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
IEC 60749-5:2017 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
IEC 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
IEC 60749-42:2014 Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3859-1995 Temperature and Humidity Control During Cooling and Dehumidifying by Compressor and Evaporator Fan Speed Variation
ASHRAE CI-01-11-2-2001 The Search for High Temperature Experimental Psychrometric Data (RP-1060)
ASHRAE 3748-1994 Measurement of the Humidity Ratio of Moist Air Using a Thermo-Hygrometer
ASHRAE 3987-1996 Maintaining Temperature and Humidity in Non-Humidity-Generating Spaces
ASHRAE SA-96-10-4-1996 Field Experiences in Residential Humidification Control with Temperature-Compensated Automatic Humidistats

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A101-B-1997 Steady-State Temperature Humidity Bias Life Test
JEDEC JESD22-A101D-2015 Steady-State Temperature-Humidity Bias Life Test
JEDEC JESD22-A100-B-2000 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A110-B-1999 Test Method A110-B Highly-Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110E-2015 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110C-2009 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A100C-2007 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A110D-2010 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A100D-2013 Cycled Temperature-Humidity-Bias Life Test

YU-JUS

JUS N.A5.721-1980 Basic environmental testing procedures. TestDb: Damp heat cyctic (12 +12 hour cyck)
JUS N.A5.708-1981 Basic environmental testing procedures. TestAd: Cold for heat dissipating specimen with gradual change of temperature

British Standards Institution (BSI)

BS EN 60068-2-38:2009 Environmental testing - Tests - Test Z/AD - Composite temperature/humidity cyclic test
BS EN 60068-2-38:1999 Environmental testing - Test methods - Tests - Test Z/AD: composite temperature/humidity cyclic test
BS EN 60068-2-38:2010 Environmental testing. Tests. Test Z/AD. Composite temperature/humidity cyclic test
BS EN 60068-2-33:2000 Environmental testing - Test methods - Guidance on change of temperature tests
BS EN 60068-2-14:2000 Environmental testing - Test methods - Test N. Change of temperature
BS EN 60068-3-6:2002 Environmental testing - Guidance - Confirmation of the performance of temperature/humidity chambers
BS EN 60793-1-52:2014 Optical fibres. Measurement methods and test procedures. Change of temperature tests
BS EN 60749-5:2003 Semiconductor devices - Mechanical and climatic test methods - Steady-state temperature humidity bias life test
BS EN IEC 60749-5:2024 Semiconductor devices. Mechanical and climatic test methods - Steady-state temperature humidity bias life test
BS EN 61300-2-48:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Temperature-humidity cycling
BS EN 60749-42:2014 Semiconductor devices. Mechanical and climatic test methods. Temperature and humidity storage
BS EN IEC 60068-3-6:2018 Environmental testing - Supporting documentation and guidance. Confirmation of the performance of temperature/ humidity chambers
BS EN 60068-2-53:2010 Environmental testing - Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
BS EN 60068-2-39:2016 Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN 2591-305:1998 Elements of electrical and optical connection - Test methods - Rapid change of temperature
BS EN IEC 60068-2-38:2021 Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
BS EN 3841-407:2005 Aerospace series - Circuit breakers - Test methods - Temperature variation
BS EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Composite temperature/humidity cyclic test
BS EN 60793-1-52:2002 Optical fibres - Measurement methods and test procedures - Change of temperature
BS EN 3841-407:2004 Circuit breakers-Test methods-Part 407:Temperature variation
BS EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11d - Rapid change of temperature
BS EN IEC 60068-2-14:2023 Environmental testing - Tests. Test N: Change of temperature
BS EN 60068-2-14:2009 Environmental testing — Part 2-14: Tests — Test N: Change of temperature

TR-TSE

TS 2238-1976 BASIC ENVIRONMENTAL TESTING PROCEDURES COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
TS 2153-1975 BASIC ENV?RONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Db : DAMP HEAT (12 + 12—HOUR CYCLE)

CENELEC - European Committee for Electrotechnical Standardization

EN 60068-2-38:1999 Environmental Testing - Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test
EN 60068-2-14:1999 Environmental Testing Part 2: Tests - Test N: Change of Temperature
EN 60068-2-30:1999 Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat@ Cyclic (12 + 12 Hour Cycle)
EN 61300-2-21:1997 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-21: Tests - Composite Temperature-Humidity Cyclic Test

Japanese Industrial Standards Committee (JISC)

JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
JIS C 60068-2-38:2013 Environmental testing -- Part 2-38: Tests -- Test Z/AD: Composite temperature/humidity cyclic test
JIS C 60068-2-38:1988 Basic environmental testing procedures Part 2: Tests Test Z/AD: Composite temperature/humidity cyclic test
JIS C 60068-2-14:2011 Environmental testing -- Part 2-14: Tests -- Test N: Change of temperature
JIS C 0028:1988 Basic environmental testing procedures Part 2: Tests Test Z/AD: Composite temperature/humidity cyclic test
JIS C 5030:1978 Change of temperature testing procedures for electronic components
JIS C 0025:1988 Basic environmental testing procedures Part 2: Tests Test N: Change of temperature
JIS C 60068-2-53:2014 Environmental testing.Part 2-53: Tests and guidance.Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
JIS B 7920:1994 Hygrometers -- Test method
JIS A 1414-3:2010 Performance test methods of panel components for building construction -- Part 3: Tests for temperature, humidity and water-proof
JIS K 5600-1-6:1999 Testing methods for paints -- Part 1: General rule -- Section 6: Temperatures and humidities for conditioning and testing
JIS C 60068-3-6:2008 Environmental testing -- Part 3-6: Supporting documentation and guidance -- Confirmation of the performance of temperature/humidity chambers
JIS K 7121:1987 Testing methods for transition temperatures of plastics
JIS C 61300-2-21:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-21: Tests -- Composite temperature/humidity cyclic test

Defense Logistics Agency

DLA MIL-W-36775 A-1979 WET BULB-GLOBE TEMPERATURE KIT

RO-ASRO

STAS 8393/27-1985 Environmental testing procedures GUIDANCE ON CHANGE OF TEMPERATURE TEST

SCC

CEI EN IEC 60068-2-38:2022 Environmental testing Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
BS 903-A35:1985 Physical testing of rubber-Temperatures, humidities and times for conditioning and testing of test pieces
BS 903-A35:1995 Physical testing of rubber-Temperatures, humidities and times for conditioning and testing of test pieces
CEI EN IEC 60068-2-14:2024 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
BS 2011-2.2N:1977 Environmental testing. Guidance-Test N. Guidance on change of temperature tests
DANSK DS/EN IEC 60068-2-14:2023 Environmental testing – Part 2-14: Tests – Test N: Change of temperature
BS 2011-2.1Z/AD:1977 Environmental testing. Tests-Tests Z/AD. Composite temperature/humidity cyclic test
11/30255443 DC BS EN 60068-2-39. Environmental testing. Part 2-39. Tests and Guidance. Combined temperature or temperature and humidity with low air pressure tests
NS 8101:1980 General rules for testing of building products - Dimensional changes - Moisture
07/30166823 DC BS EN 60068-2-38. Environmental testing. Part 2-38. Tests. Test Z/AD. Composite temperature/humidity cyclic test
07/30166819 DC BS EN 60068-2-14. Environmental testing. Part 2. Tests. Test N. Change of temperature
DANSK DS/ISO 3270:1984 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
BS EN 61300-2-21:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests-Composite temperature-humidity cyclic test
CEI EN 60749-5:2017 Semiconductor devices - Mechanical and climatic test methods Part 5: Steady-state temperature humidity bias life test
12/30263960 DC BS EN 60749-42. Semiconductor devices. Mechanical and climatic test methods. Temperature humidity storage
BS 2011-2.1N:1985 Environmental testing. Tests-Test N. Change of temperature
CEI EN IEC 60749-5:2024 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
DANSK DS/EN IEC 60749-5:2024 Semiconductor devices – Mechanical and climatic test methods – Part 5: Steady-state temperature humidity bias life test
DANSK DS/EN 60068-3-6:2002 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
BS EN ISO 75-1:1996 Plastics. Determination of temperature of deflection under load-General test method
CEI EN 60749-42:2016 Semiconductor devices - Mechanical and climatic test methods Part 42: Temperature and humidity storage
DANSK DS/EN IEC 60068-3-6:2018 Environmental testing – Part 3-6: Supporting documentation and guidance – Confirmation of the performance of temperature/humidity chambers
CEI EN IEC 60068-3-6:2018 Environmental testing Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
CEI EN 60068-2-39:2017 Environmental testing Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
DANSK DS/EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
DANSK DS/EN 61006:2004 Electrical insulating materials - Methods of test for the determination of the glass transition temperature

Danish Standards Foundation

DS/EN IEC 60068-2-38:2021 Environmental testing – Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test
DS/ISO 6444:1982 Door leaves. Test of behaviour under humidity variations (successive uniform climates)
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/ISO 3270:1984 Paints and varnishes and their raw materials. Temperatures and humidities for conditioning and testing
DS/EN 23270:1996 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
DS 1103.8:1982 Test methods for rigid flat sheets. Dimensional changes associated with changes in relative humidity
DS/IEC 68-2-14:1987 Basic environmental testing procedures. Part 2: Tests. Test N: Change of temperature
DS/IEC 68-2-33:1979 Basic environmental testing procedures. Part 2: Tests. Guidance on change of temperature tests with Amendment No.1(1978)
DS/IEC 68-2-30:1986 Basic environmental testing procedures. Part 2: Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) with Amendment No.1(1985)
DS/EN 60749-5:2003 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test

International Organization for Standardization (ISO)

ISO 6444:1980 Door leaves; Test of behaviour under humidity variations (successive uniform climates)
ISO 3270:1984 Paints and varnishes and their raw materials; Temperatures and humidities for conditioning and testing
ISO 471:1977 Title missing - Legacy paper document
ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO 3270:1980 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
ISO/R 203:1961 Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
ISO 24353:2008 Hygrothermal performance of building materials and products - Determination of moisture adsorption/desorption properties in response to humidity variation

VN-TCVN

TCVN 7699-2-38-2007 Environmental testing.Part 2-38: Tests.Test Z/AD: Composite temperature/humidity cyclic test
TCVN 7699-2-14-2007 Environmental testing.Part 2-14: Tests.Test N: Change of temperature
TCVN 7699-2-33-2007 Environmental testing.Part 2-33: Tests.Guidance on change of temperature tests
TCVN 5668-1992 Paints and varnishes and their raw materials.Temperatures and humidities for conditioning and testing

Spanish Association for Standardization (UNE)

UNE-EN 60068-2-38:2010 Environmental testing -- Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
UNE-EN 60068-2-14:2011 Environmental testing -- Part 2-14: Tests - Test N: Change of temperature
UNE-EN 60068-2-33:2000 Environmental testing. Part 2: Tests. Guidance on change of temperature tests.
UNE 53952:2006 IN Plastics. Flexible foams of polyurethane (PUR). Hardness variation by humidity and temperature conditions.
UNE 53509:1995 RUBBER. TIMES, TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING
UNE 20-501 Pt.2-14-1994 Basic environmental testing procedures. Part 2: Tests. Test N: Change of temperaturerowth
UNE-EN IEC 60068-3-6:2018 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN 60749-5:2017 Mechanical and climatic test methods for semiconductor devices Part 5: Constant temperature and humidity bias life test
UNE-EN IEC 60068-3-6:2018/AC:2018-05 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in June of 2018.)
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

TH-TISI

TIS 2380.2-30-2010 Environmental testing.part 2-30: tests.test db:damp heat, cyclic (12 h + 12 h cycle)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0468-2-39-2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 60068-2-39:2015); German version EN 60068-2-39:2016

South African Bureau of Standard

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
SANS 3270:1984 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
SANS 60793-1-52:2001 Optical fibres Part 1-52: Measurement methods and test procedures - Change of temperature

Association Francaise de Normalisation

NF C20-738*NF EN IEC 60068-2-38:2021 Environmental testing - Part 2-38 : tests - Test Z/AD : composite temperature/humidity cyclic test
NF C20-738*NF EN 60068-2-38:2010 Environmental testing - Part 2-38 : tests - Test Z/AD : composite temperature/humidity cyclic test.
NF T51-198:1979 Plastics. Guidelines for rapid temperature variation tests.-.
NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.
NF T30-058*NF EN 23270:1991 Paints and varnishes and their raw materials. Temperatures and humidities for conditioning and testing.
NF G35-048*NF EN 986:2006 Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distorsion out of plane.
NF P20-513:1985 METHODS OF TESTING DOORS. BEHAVIOUR UNDER HUMIDITY VARIATIONS OF DOOR LEAVES PLACED IN SUCCESSIVE UNIFOR CLIMATES. (EUROPEAN STANDARD EN 43).
NF T30-072:2017 Paints and varnishes - Test of resistance of a paint to cyclic temperature changes
NF C96-022-5*NF EN 60749-5:2017 Semiconductor devices - Mechanical and climatic test methods - Part 5 : steady-state temperature humidity bias life test
NF C96-022-5:2003 Semiconductor devices - Mechanical and climatic test methods - Part 5 : steady-state temperature humidity bias life test.
NF C96-022-42*NF EN 60749-42:2015 Semiconductor devices - Mechanical and climatic test methods - Part 42 : temperature humidity storage
NF C20-714:1987 BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST METHODS. TEST N : CHANGE OF TEMPERATURE.
NF C20-700-2-39*NF EN 60068-2-39:2016 Environmental testing - Part 2-39 : tests - Tests and guidance : combined temperature or temperature and humidity with low air pressure tests
NF C26-205:1993 Methods of test for the determination of the galss transition temperature of electrical insulationg liquids.
NF C93-902-21:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-21 : tests. Composite temperature humidity cyclic test.
NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.
NF C93-840-1-52*NF EN 60793-1-52:2014 Optical fibres - Part 1-52 : measurement methods and test procedures - Change of temperature tests

European Committee for Standardization (CEN)

HD 323.2.38 S1-1988 Basic environmental testing procedures; part 2: tests; test Z/AD: composite temperature/humidity cyclic test
HD 323.2.33 S1-1988 Basic environmental testing procedures; part 2: tests; guidance on change of temperature tests
EN 23270:1991 Paints and Varnishes and Their Raw Materials - Temperatures and Humidities for Conditioning and Testing

PL-PKN

PN E04070-11-1986 Power transformers Test methods Test of temperature rise
PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces

BE-NBN

NBN-EN 23270-1992 Paints, varnishes and their raw materials. Temperature and humidity required for temperature and humidity measurement and experiments
NBN B 25-203-1977 Door test methods. Humidity changes of door leaves in similar climates
NBN B 25-203-1986 Test methods for doors, humidity changes of door leaves in similar climates

German Institute for Standardization

DIN EN 60068-2-38:2000 Environmental testing - Part 2: Tests; test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:1974); German version EN 60068-2-38:1999
DIN EN IEC 60068-2-38 Corrigendum 1:2024 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:2021); German version EN IEC 60068-2-38:2021; Corrigendum 1
DIN EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005
DIN 50011-13:1991 Technical climatology; climate-test-devices; climatic parameter: air-humidity and air-temperature
DIN 50011-13:1979 Technical climatology; climate-test-devices; climatic parameter: air-humidity and air-temperature
DIN 52364:1965 Testing Particleboard to Determine Thickness Changes Due to Humidity
DIN EN 60749-5:2003 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test (IEC 60749-5:2003); German version EN 60749-5:2003
DIN EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests (IEC 60068-2-39:2015); German version EN 60068-2-39:2016
DIN EN 23270:1991 Paints, varnishes and their raw materials; temperatures and humidities for conditioning and testing (ISO 3270:1984); german version EN 23270:1991
DIN EN 60068-2-38:2010 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38:2009); German version EN 60068-2-38:2009
DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids

European Committee for Electrotechnical Standardization（CENELEC）

EN 60068-2-38:2009 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
HD 323.2.30 S3-1988 Basic Environmental Testing Procedures - Part 2: Tests. Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle)
EN 60068-2-30:2005 Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12 Hour Cycle)
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60749-4:2017 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST)
EN 60749-5:2017 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
EN 60749-42:2014 Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage
EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test

CZ-CSN

CSN 73 2581-1983 Test for resistance or surface finish of building structures to acute temperature variations
CSN IEC 68-2-38:1992 Electrotechnical and electronic products. Basic environmental testing procedures. Part 2-38: Test Z/AD: Composite temperature/humidity cyclic test

Bureau of Indian Standards

IS 8252-2-1980 Environmental tests for aircraft equipment Part 2 Temperature, pressure and humidity
IS 9001-3-1978 Guidance for environmental testing: Part 3 Change of temperature
IS 9000-6-1978 Basic environmental testing procedures for electronic and electrical items: Part 6 Composite temperature/humidity cyclic test
IS 8252-8-1979 Environmental tests for aircraft equipment Part 8 Change of temperature
IS 2106-6-1965 Environmental tests for electronic and electrical equipment-6 - Rapid change of temperature

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.14(Int):2001 Reconstituted wood-based panels - Methods of test - Dimensional changes associated with changes in relative humidity
AS/NZS 4266.14:2004 Reconstituted wood-based panels - Methods of test - Dimensional changes associated with changes in relative humidity

SE-SIS

SIS 11 23 15-1966 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
SIS 11 23 15-1973 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
SIS SEN 43 16 13-1971 Environmental testing. Change of temperature. Test N

Gosstandart of Russia

GOST 22848-1977 Metals. Method for testing the impact strength at temperature from -100 up to -269 °C
GOST 29317-1992 Paint and varnishes and their raw materials. Temperatures and humidities for conditioning and testing
GOST 21798-1976 Packages filled transport. Method of conditioning for testing
GOST R IEC 60793-1-52-2015 Optical fibres. Part 1-52. Measurement methods and test procedures. Change of temperature tests
GOST 25984.4-1983 Chrysotile asbestos. Method for determination of moisture content
GOST 28209-1989 Basic environmental testing procedures. Part 2. Tests. Test N: Change of temperature
GOST 21523.4-1977 Modified wood. Method for determination of moisture content
GOST 28219-1989 Basic environmental testing procedures. Part 2. Tests. Guidance on change of temperature tests

IEC - International Electrotechnical Commission

PAS 62161-2000 Steady State Temperature Humidity Bias Life Test (Edition 1.0)
PAS 62177-2000 Highly-Accelerated Temperature and Humidity Stress Test (HAST) (Edition 1.0)

FI-SFS

SFS 3144-1980 plastic pipe. Temperature change test

IN-BIS

IS 9000 Pt.6-1978 Basic Environmental Test Procedures for Electronic and Electrical Products Part VI Comprehensive Temperature/Humidity Cycle Test
IS 8252 Pt.8-1979 Aircraft equipment environmental testing Part 8 Temperature changes

Malaysia Standards

MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing

IT-UNI

UNI 426-1942 Fabric testing. Humidity measurement

Indonesia Standards

SNI 12-4265-1996 Temperature shock test method for enamel ware

GSO

GSO IEC 60068-2-39:2021 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
GSO IEC 60068-3-6:2021 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
BH GSO IEC 60068-3-6:2022 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
BH GSO IEC 60068-2-39:2022 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

Military Standards (MIL-STD)

DOD A-A-51588-1986 WET GLOBE TEMPERATURE KIT (DIAL THERMOMETER TYPE, MECHANICAL)

PH-BPS

PNS IEC 60749-42:2021 Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage

ATIS - Alliance for Telecommunications Industry Solutions

0600010-2007 Temperature@ Humidity & Altitude Standards (Pre-Pub)

Canadian General Standards Board （CGSB)

CGSB 4.2 NO. 25.1-97-CAN/CGSB-1997 Methodes Pour Epreuves Textiles Variation Dimensionnelle Au Trempage Dans L'eau

Others: Alternating salt spray test,Damp heat alternating test,Alternate test,Alternate test method,Alternating temperature and humidity test,Alternate test conditions,High and low temperature alternating test,High and low temperature alternating test chamber