Steel thickness detection

Steel thickness detection, Total:273 items.

The international standard classification for "Steel thickness detection" includes: Non-destructive testing of metals , Components for conveyors , Flat steel products and semi-products , Non-destructive testing .

The Chinese standard classification for "Steel thickness detection" includes: Metal nondestructive testing method , Rubber tube, rubber belt and tape , Steel sheet and strip , Basic standards and general methods , Ionizating Radiation Measurement .

未注明发布机构

JIS G 0589:2024 Automated full peripheral ultrasonic thickness examination of steel pipes and tubes
AS 2452.1:2004(R2017) Non-destructive testing - Determination of thickness - Determination of wall thickness of pipe by the use of radiography
ASTM RR-D13-1110 2003 D1777-Test Method for Thickness of Textile Materials
DIN EN ISO 7590 E:2017-10 Method for determination of total thickness and cover thickness of steel cord conveyor belts (draft)
DIN EN ISO 18203 E:2021-12 Determination of thickness of hardened layer on steel surface (draft)

Group Standards of the People's Republic of China

T/CASMES 324-2024 Technical specification for testing the thickness of steel reinforcement protective layer and steel reinforcement diameter in concrete structures
T/CECS 964-2021 Technical specification for testing yield strength of steel by pendulum hammer method
T/JSJTQX 20-2021 Technicalspecificationforthicknessdetectionofsteelbarprotectivelayerbyelectromagneticinductionmethod
T/ZZXJX 299-2023 Technical regulations for testing the strength of construction steel using the impression method
T/CCCTA 0054-2024 Corrosion and rust layer thickness detection methods for power transmission and transformation equipment
T/ZZXJX 050-2021 Technical specification for steel cover thickness and steel bar diameter detection
T/CSTM 00666-2023 Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot

Beijing Provincial Standard of the People's Republic of China

DB11/T 365-2006 technical specification for insnpection of the depth of coverage and the diameter of reinforcing bars in concrete by electromagnetic method
DB11/T 365-2016 Technical specification for steel cover thickness and steel bar diameter detection

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4116-2021 Technical specification for on-site testing of tensile strength of building structural steel by Leeb hardness tester method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5753-2013 Steel Cord Conveyor Belts - Methods for the Determination of Total Thickness and Cover Thickness
GB/T 5753-2008 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
GB/T 5753-1994 Steel cord conveyor belts--Cover thickness measurement
GB/T 5313-2023 Steel plate with through-thickness properties
GB/T 5313-2010 Steel plates with through-thickness characteristics
GB/T 5313-1985 Steel plate with through-thickness characteristics
GB/T 2970-2016 Method for ultrasonic testing of thicker steel plates
GB/T 2970-1991 Thicker steel plate―Method for ultrasonic inspection
GB/T 28297-2012 Thicker steel plates—Method for automatic ultrasonic testing
GB/T 31932-2015 Method for electromagnetic automatic ultrasonic testing for thicker steel plates
GB/T 32552-2016 Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
GB/T 2970-2004 Thicker Steel Plates - Method for Ultrasonic Inspection

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37800-2019 Hot rolled longitudinally profiled steel plate
GB/T 37158-2018 Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography (CT)
GB/T 37122-2018 Non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT)

Shandong Provincial Standard of the People's Republic of China

DB37/T 5169-2020 Technical specification for testing the strength of building steel by imprint method
DB37/T 5215-2022 On-site inspection technical standard for prefabricated steel structure residences
DB37/T 5046-2015 Technical specification for on-site testing of tensile strength of building steel by Leeb hardness method

未注明发布机构

DIN EN ISO 7590 E:2017-10 Method for determination of total thickness and cover thickness of steel cord conveyor belts (draft)
JIS G 0589:2024 Automated full peripheral ultrasonic thickness examination of steel pipes and tubes
DIN EN ISO 18203 E:2021-12 Determination of thickness of hardened layer on steel surface (draft)
AS 2452.1:2004(R2017) Non-destructive testing - Determination of thickness - Determination of wall thickness of pipe by the use of radiography
ASTM RR-D13-1110 2003 D1777-Test Method for Thickness of Textile Materials

Fujian Provincial Standard of the People's Republic of China

DB35/T 1114-2011 Technical specification for detection of steel bar spacing and steel bar cover thickness by electromagnetic induction method

Taiwan Provincial Standard of the People's Republic of China

CNS 13813-1997 Specification for Through-Thickness Characteristics of Steel Plate and Wide Flat
CNS 13963-1997 Method of test for thickness and density of sprayed fire-resistive materials applied to steel structure
CNS 1274-1981 Method of Test for Thickness of Leather

Anhui Provincial Standard of the People's Republic of China

DB34/T 1681-2012 Commercial stainless steel kitchen equipment material and thickness requirements

National Metrological Verification Regulations of the People's Republic of China

JJG(轻工) 50-1990 Verification Regulations for Paper and Board Thickness Meter
JJG 935-1998 Verification Regulation of γ-Ray Thickness Gauge

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 974-2015 Method of Pavement Radar Detecting Pavement Surface Thickness

Professional Standard - Traffic

JT/T 4402.2-1993 Ship hull repair technical requirements steel plate thickness measurement

HU-MSZT

MSZ 2636-1968 Steel Thickness Geometric Inspection
MSZ 10783/4-1970 Mechanical angle detection mode angle thickness detection
MSZ 10783/3-1970 Mechanical angle detection mode. Angle thickness detection
MSZ 6575/3.lap-1961 Coating inspection. Multi-layer thickness detection
MSZ 6575/16-1979 Belt buckle inspection. Thickness measurement mode
MNOSZ 22307-1955 Measuring instrument (wood thickness measurement)
MSZ 4309/5-1982 MSZ 4309/5-82 Steel welding and fixation inspection. Hardness testing
MSZ 6575/20-1979 Belt buckle detection layer thickness measurement and testing
MNOSZ 15565-1956 Plate thickness micron measuring instrument
MSZ 871-5.lap-1959 Leather product testing methods. Measurements of thickness, length and width
MSZ 9640/38-1981 Paint coating and coating system inspection. Coating thickness detection
MSZ 7864-1964 Echo-ultrasonic testing method for medium and thick plate steel
MNOSZ 15573-1953 Sheet thickness gauge with measuring gauge
MSZ 9650/27-1982 Paint testing. Wet paint layer thickness measurement
MSZ 4308/2-1969 Steel weldability testing. Testing the hardness of seams in hot places
MSZ 10783/6-1984 Textile floor furniture raw material inspection mode. Measurement data thickness definition after loading
MSZ 75-1981 Steel plate thickness ductility
MSZ 4309/4-1983 Steel welding inspection. Strike detection
MSZ 6575/15-1982 Coating surface inspection. Multilayer thickness content, microscopic
MSZ 6575/18-1981 Coating surface inspection. Multi-layer thickness measurement power mode
MSZ 4309/7.lap-1964 Steel blunt welding inspection Braided structure inspection
MSZ 4309/2-1983 Inspection of steel welding strength. Tear detection

Korean Agency for Technology and Standards (KATS)

KS D ISO 17577-2022 Steel－Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
KS D ISO 17577-2007(2022) Steel－Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
KS D ISO 17577-2007(2017) Steel－Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
KS B ISO 7590:2013 Steel cord conveyor belts－Methods for the determination of total thickness and cover thickness
KS B ISO 7590:2004 Steel cord conveyor belts-Methods for the determination of total thickness and cover thickness
KS B ISO 7590-2013 Steel cord conveyor belts－Methods for the determination of total thickness and cover thickness
KS B ISO 7590-2004(2009) Steel cord conveyor belts－Methods for the determination of total thickness and cover thickness
KS D 0281-2021 Non-destructive measurement of film thickness of pipeline coatings on steel
KS D 0216-2001 Methods of measuring decarburized depth for steel
KS D ISO 13976-2002(2012) Hot-rolled steel sheet in coils of structural quality and heavy thickness
KS D 0274-1993 Method of measuring nitrided case depth for iron and stee1
KS D ISO 10543:2002 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes－Full peripheral ultrasonic thickness testing
KS M 3089-2009 Testing method for thickness of plastic film and sheeting
KS F 2901-2008 Test methods for thickness and density of sprayed fire resistive material applied to structural members
KS D 0276-1993 Specification for through-thickness characteristics of steel plate and wide flat
KS F ISO 16983:2016 Wood-based panels－Determination of swelling in thickness after immersion in water

GSO

BH GSO ISO 17577:2016 Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
GSO ISO 17577:2013 Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
GSO ISO 7590:2015 Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness
OS GSO ISO 4970:2015 Steel -- Determination of total or effective thickness of thin surface-hardened layers
GSO ISO 18203:2017 Steel -- Determination of the thickness of surface-hardened layers
OS GSO ISO 7590:2015 Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness
OS GSO ISO 18203:2017 Steel -- Determination of the thickness of surface-hardened layers
BH GSO ISO 7590:2016 Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness

SE-SIS

SIS SS 11 42 03-1988 Non-destructive testing - Ultrasonic testing of sheet (strip) and plate with thickness ≥5mm
SIS SS 23 27 12-1989 Timber — Planed timber — Thickness and width
SIS SS 92 35 13-1980 Floorings — Determination of thickness of material layers
SIS SS IEC 577:1981 Nuclear instrumentation - lonizing radiation thickness meters
SIS 21 21 11-1973 Cold rolled steel strip. Thickness tolerances
SIS SS 11 43 05-1984 Non-destructive testing - Eddy current testing - Steel - Tubes

British Standards Institution (BSI)

BS ISO 18203:2016 Steel. Determination of the thickness of surface-hardened layers
BS EN 10307:2002 Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
BS EN 10307:2001(2002) Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
BS ISO 17577:2016 Steel. Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
BS 3T 60:1980 Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
BS EN ISO 7590:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
BS EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
BS EN ISO 18203:2022 Steel. Determination of the thickness of surface-hardened layers
BS EN ISO 7590:2018 Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
BS 6286:1982 Methods of measurement of total or effective thickness of thin surface-hardened layers in steel
BS EN 10246-15:2000 Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
BS EN 10246-13:2000 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
BS EN 324-1:1993 Wood-based panels. Determination of dimensions of boards. Determination of thickness, width and length
24/30477161 DC BS EN ISO 16809 Non-destructive testing - Ultrasonic thickness determination
BS EN ISO 24346:2012 Resilient floor coverings. Determination of overall thickness
BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
BS EN ISO 10893-12:2011 Non-destructive testing of steel tubes. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes

BR-ABNT

ABNT MB-1333-1980 Dry film thickness detection
ABNT PB-35-1973 Carbon Steel Thick Steel Plate Thickness and Tolerance
ABNT MB-855-1979 Testing of alternating bending resistance of flat metal rolled products within 3mm thickness
ABNT PB-34-1973 Carbon Steel Sheet Plate Thickness and Tolerance
ABNT P-PB-52-1964 Tinned steel sheet [steel plate] thickness and tolerances
ABNT PB-575-1979 Unequal sides and different thickness angle steel, hot rolled steel

Society of Automotive Engineers (SAE)

SAE ARP2654A-2023 Ultrasonic Thickness Testing
SAE AMS4901N-2002 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70 ksi (485 MPa)
SAE J1058-2024 Standard Sheet Steel Thickness and Tolerances
SAE AMS2632A-2008 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
SAE AMS2632C-2022 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances

YU-JUS

JUS G.S2.022-1986 Leather. Physical testing. Measurement of thickness
JUS H.N8.202-1988 esting of corrugated fibreboard. Determination of thickness
JUS C.A7.061-1992 Non destructive testing - Ultrasonic testing of steel plate of thickness equal to or greater than 6 mm (reflection method)
JUS G.E2.313-1983 Steel cord conveyor belts. Cover thickness measurement
JUS H.N8.203-1988 Testing ofpaperand-hoard. Determination of the thickness ofsingle sheets and method ofcalculation of the apparent density ofboard
JUS D.A1.044-1979 Test ofwood Determination ofdensity

Japanese Industrial Standards Committee (JISC)

JIS G 3140:2011 Higher yield strength steel plates for bridges
JIS G 3140:2008 Higher yield strength steel plates for bridges
JIS G 3199:2021 Specification for through-thickness characteristics of steel plate, wide flat and sections
JIS K 7130:1999 Plastics -- Film and sheeting -- Determination of thickness
JIS H 8401:1990 Methods of thickness measurement for thermal spraying coatings

ES-UNE

UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
UNE-EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)
UNE-EN ISO 7590:2018 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018) (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-EN 2589:2017 Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm = a = 3 mm - Dimensions

SCC

UNE-EN 14127:2005 Non-destructive testing - Ultrasonic thickness measurement.
AS 2452.3:1985 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
HOLDEN HN 0044-1990 Thickness Determination of Trim Materials
DIN EN 14127 E:2010 Draft Document - Non-destructive testing - Ultrasonic thickness measurement; German version FprEN 14127:2010
AS 2452.1:1982 Non-destructive testing - Determination of thickness - Determination of the wall thickness of pipe by the use of radiography
DANSK DS/ISO 18203:2021 Steel – Determination of the thickness of surface-hardened layers
BS EN ISO 7590:2001 Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
NS-EN 10246-13:2000 Non-destructive testing of steel tubes — Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
NS-EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
DANSK DS/EN 10307:2001 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
NS-EN 10307:2001 Non-destructive testing — Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
11/30245303 DC BS ISO 16809. Non-destructive testing. Ultrasonic thickness measurement
DANSK DS/EN ISO 16809:2019 Non-destructive testing – Ultrasonic thickness measurement (ISO 16809:2017)
BS 2544:1987 Methods for determination of thickness of textile materials
DANSK DS/EN ISO 10893-12/A1:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
DANSK DS/EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
DANSK DS/EN 10160:2000 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
NS-EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
AENOR UNE-EN 10160:2000 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
NS-EN ISO 7590:2001 Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness (ISO 7590:2001)
NS-EN ISO 7590:2018 Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness (ISO 7590:2018)
DANSK DS/EN ISO 7590:2018 Steel cord conveyor belts – Methods for the determination of total thickness and cover thickness (ISO 7590:2018)
UNE-EN ISO 7590:2001 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness. (ISO 7590:2001).
NS-EN ISO 7590:2009 Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness (ISO 7590:2009)
DIN EN ISO 16809 E:2018 Draft Document - Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017); German and English version prEN ISO 16809:2018
BS 3983:1966 Determination of the thickness and bulk of paper
AS 2452.2:1981 Non-destructive testing - Determination of thickness - Determination of the remaining wall thickness of corroded pipe by the use of radiography
NS-EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)
07/30158050 DC BS EN ISO 7590. Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
BS 2600:1955 Radiographic examination of fusion welded butt joints in steel in thicknesses of steel up to 2 inches
DANSK DS/EN ISO 18203:2022 Steel – Determination of the thickness of surface-hardened layers (ISO 18203:2016)
NS-EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
NS 1184:1964 Metal plating — Testing of the uniform thickness by the copper sulphate method
09/30166492 DC BS ISO 10893-12. Non-destructive testing of steel tubes. Part 12. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
AENOR UNE-EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
DANSK DS/EN 2589:2017 Aerospace series – Steel – Sheet and strip, cold rolled – Thickness 0,1 mm ≤ a ≤ 3 mm – Dimensions

Standard Association of Australia （SAA）

AS 2452.3:2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
AS 2452.1:2004 Non-destructive testing - Determination of thickness - Determination of wall thickness of pipe by the use of radiography

AR-IRAM

IRAM 507-N.I.O.-1946 Steel plates with a thickness exceeding 4.75mm (thick steel plates)

International Organization for Standardization (ISO)

ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
ISO 7590:2018 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
ISO 7590:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
ISO 7590:2001 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
ISO 18203:2016 Steel - Determination of the thickness of surface-hardened layers
ISO 7590:1988 Steel cord conveyor belts — Cover thickness measurement
ISO 7590:1982 Title missing - Legacy paper document
ISO 7590:1990 Steel cord conveyor belts — Cover thickness measurement
ISO 10543:1993 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing
ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

CEN - European Committee for Standardization

EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement

DIN

DIN EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
DIN EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
DIN EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)

Association Francaise de Normalisation

NF EN ISO 7590:2018 Steel cable conveyor belts - Methods for determining total thickness and coating thickness
NF EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: automated ultrasonic testing for the detection of splits in strips/heavy plates used for the manufacture of welded steel tubes
NF A04-204:1985 Steel products. Determination of the total or conventional thickness of surface hardened thin layers.
NF T47-112:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness.
NF A04-250*NF EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers
NF T47-112*NF EN ISO 7590:2018 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
NF A49-785-12*NF EN ISO 10893-12:2011 Non destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes.
NF T47-100-3:1988 STEEL CORD CONVEYOR BELTS. COVER THICKNESS MEASUREMENT.
NF EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3: determination of thickness, average thickness of a sheet in a bundle and average density and hand

German Institute for Standardization

DIN EN ISO 7590:2010 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009); German version EN ISO 7590:2009
DIN EN ISO 7590:2018-10 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018); German version EN ISO 7590:2018
DIN EN ISO 18203:2022-07 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016); German version EN ISO 18203:2022
DIN EN 10307:2002-03 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); German version EN 10307:2001
DIN EN ISO 10893-12:2020-10 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011 + Amd 1:2020); German version EN ISO 10893-12:2011 + A1:2020
DIN EN 10160:1999-09 Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method); German version EN 10160:1999
DIN EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method); German version EN 10160:1999
PAS 1022-2004 Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
DIN EN ISO 24346:2012 Resilient floor coverings - Determination of overall thickness (ISO 24346:2006); German version EN ISO 24346:2012
DIN EN ISO 7590:2018 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018)

IN-BIS

IS 13691-1993 Steel. Determination of total or effective thickness of thin surface-hardened layers

RU-GOST R

GOST 12023-2003 Textile materials and articles of them. Method of thickness determination
GOST 12023-1993 Textile. Cloth. Method of thickness determination
GOST 12023-1966 Textile materials. Method of thickness determination
GOST 3815.4-1993 Pile materials. Methods for determination of pile height and thickness
GOST R ISO 16809-2015 Non-destructive testing. Ultrasonic testing. Thickness measurement
GOST 28702-1990 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements

(U.S.) Ford Automotive Standards

FORD FLTM BN 023-2-2000 THICKNESS TEST FOR PADDING MATERIALS

CZ-CSN

CSN 05 1172-1976 Ultrasonic testing. Ultrasonic manual testing oE fusion welds of steel classes 11 — 17 of thickness from 10 up to 50 mm
CSN 01 5021-1993 Nondestructive testing. Ultrasonic measurement of material thickness

European Committee for Standardization (CEN)

EN ISO 7590:2018 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
EN ISO 7590:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
EN ISO 7590:2001 Steel and Converted Belts - Methods for the Determination of Total Thickness and Cover Thickness ISO 7590:2001
EN ISO 18203:2022 Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)
EN 10246-15:2000 Non-Destructive Testing of Steel Tubes - Part 15: Automatic Ultrasonic Testing of Strip/Plate Used in the Manufacture of Welded Steel Tubes for the Detection of Laminar Imperfections
EN ISO 24346:2012 Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)
EN 10307:2001 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)

KR-KS

KS B ISO 10893-12-2023 Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded(except submerged arc-welded) steel tubes
KS B 2386-2024 Metallic materials — Test method for the determination of brittle crack arrest temperature(CAT) of extremely thick steel plates

Lithuanian Standards Office

LST EN 10307-2002 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
LST EN 10160-2001 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
LST EN ISO 7590:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009)
LST EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)

Danish Standards Foundation

DS/EN 10307:2002 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
DS/ISO 18203:2021 Steel – Determination of the thickness of surface-hardened layers
DS/EN ISO 7590:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
DS/EN 10160:2000 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
DS/EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes

GM Global

GMW 3224-2012 Nominal Sheet Steel Thicknesses and Thickness Tolerances Issue 6; English

RO-ASRO

STAS 7235-1988 DEPTH OF STEEL HARDENED LAYERS Determination methods
STAS SR ISO 7590:1995 Steel cord conveyor belts - Cover thickness measurement

GOSTR

GOST ISO 7590-2017 Steel cord conveyor belts. Methods for the determination of total thickness and covers thickness

DE-VDA

VDA 230-204-2005 Coating Thickness Testing - Determine the extent of leather damage

PT-IPQ

NP 2413-1984 Steel. Thickness measurement of surface hardened layer
E 185-1966 Plastic material flat type. Thickness measurement
NP 2214-1986 plastic material. Film and sheet, measure thickness more easily than direct measurement

CU-NC

NC 04-18-1968 Simple bending of steel Thickness less than 3 mm
NC 04-19-1968 Reverse bending of steel Thickness less than 3 mm
NC 41-50-1987 Footwear and Leather Industry Leather and Sole Determination of Thickness

ZA-SANS

SANS 150:1986 Machine-made textile floor coverings - Determination of thickness

AENOR

UNE-EN 10160:2000 ULTRASONIC TESTING OF STEEL FLAT PRODUCT OF THICKNESS EQUAL OR GREATER THAN 6 MM (REFLECTION METHOD).
UNE-EN ISO 7590:2009 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009)
UNE-EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)

VN-TCVN

TCVN 5116-1990 Non-destructive testing.Plate steel.Ultrasonic method for testing continuity

NL-NEN

NEN 5183-1990 Quarry stone and similar stony materials Determination of thickness and length ratio
NEN-EN 428-1994 Resilient floor coverings. Determination of overall thickness

Association of German Mechanical Engineers

DVS 2303-1-2011 Non-destructive testing of thermal spray coatings - coating thickness measurement
DVS 2303-1-2003 Non-destructive testing of thermal spray coatings - coating thickness measurement

PL-PKN

PN P22211-1988 Leathers Determination of thickness and decrease of thickness

SAE - SAE International

SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE J1058-1976 Sheet Steel Thickness and Profile

IT-UNI

UNI 5329-1963 Non-destructive testing of metallic materials. Ultrasonic inspection of steel plates with thickness greater than 15mm. pulse reflection method
UNI 4847-1970 Measurement of surface hardened layer thickness on steel components