Preparation method of allene phosphoric acid

Preparation method of allene phosphoric acid, Total:299 items.

The international standard classification for "Preparation method of allene phosphoric acid" includes: Fertilizers , Salts , Surface active agents , Esters , Plastics pipes , Alcohols. Ethers , Rubber , Latex and raw rubber , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "Preparation method of allene phosphoric acid" includes: Basic standards and general methods on chemical fertilizers , Basic standards and general methods for chemical additive , General organic chemicals , Food sanitation , Plastic profile , Synthetic rubber , Basic standards and general methods for synthetic resin and plastic , Basic organic chemicals , Tobacco curing in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9984.2-1988 Sodium tripolyphosphate for industrial use--Determination of total phosphorus pentoxide content--Quinoline phosphomolybdate qravimetric method
GB/T 10209.2-2010 Determinationofmonoammoniumphosphateanddiammoniumphoshpate—
GB/T 42268-2022 Rubber，ethylene-propylene-diene(EPDM)—Evaluation procedure
GB/T　17530.2-1998 Determination of Purity of Industrial Acrylic Acid by Gas Chromatography
GB/T 9984.2-2004 Sodium tripolyphosphate for industrial use―Determination of total phosphorus (Ⅴ) oxide content―Quinoline phosphomolybdate gravimetric method
GB/T 10209.4-2010 Determination of monoammonium phosphate and diammonium phoshpate—Part4:Particlesiz
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) f
GB/T 10209.3-2010 Determination of monoammonium phosphate and diammonium phoshpate - Part 3: Water content
GB/T 17530.2-2023 Test method of acrylic acid and acrylates for industrial use—Part 2:Determination of organic impurities and purity of acrylates for industrial use—Gas chromatography
GB/T 11297.12-1989 Test method for extinction ratio of LN,kDP and kD*P electrooptic crystal
GB/T 33428-2016 Polyacrylate rubber--General specification and evaluation procedure
GB/T 14940-1994 Method for determination of sodium propionate and calcium propionate in foods
GB/T 10209.1-2008 Determination of monoammonium phosphate and diammonium phoshpate - Part 1: Total nitrogen content
GB/T 17530.2-1998 Determination of purity of industrial use acrylate esters by gas chromatography

Professional Standard - Chemical Industry

HG/T 5589～5593-2019 Propylene polymerization catalyst and methacrolein oxidation to methacrylic acid catalyst chemical composition analysis method, methanol to light olefin catalyst thermal wear index test method and acid site determination method and aluminum-based desulfur
HG/T 6285-2024 Test method for the activity of catalysts for the oxidation of methacrolein to methacrylic acid
HG/T 6281-2024 Test method for catalyst activity of propylene oxidation to acrolein

Professional Standard - Light Industry

QB/T 2223-1996 Measurement Method for Acrylic Resin Emulsion for Leather-making Industry

Professional Standard - Petrochemical Industry

SH/T 1743-2011 Rubber ethylene-propylene-diene(EPDM)—Evaluation procedure
SH/T 1611-2004 Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure
SH/T 1548-2004 1-Butene for industrial use -- Determination of trace propadience and propyne -- Gas chromatographic method
SH/T 1743-2004 Rubber, ethylene-propylene-diene (EPDM)-Evaluation procedure

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34685-2017 Acrylonitrile-butadiene rubber(NBR)-Evaluation procedure

工业和信息化部

SH/T 1831-2020 Determination of free acrylonitrile content in acrylonitrile-butadiene rubber-Headspace gas chromatography
HG/T 5592-2019 Analytical method of chemical composition in oxidation of methylacrolein to methacrylic acid catalyst

Professional Standard - Commodity Inspection

SN/T 4502-2016 Determination of tri(2,3-dichloropropyl)phosphate,trisC2-carboxyethyl)phosphine and tris(chlorisopropyl)phosphate in polyurethane foams and its products-Gas chromatography-mass spectrometry

未注明发布机构

DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN 6075 E:2017-03 Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series
ASTM RR-D11-1065 1993 D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM RR-D19-1187 2009 D7597-Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromat
ASTM RR-D11-1021 1982 D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

Group Standards of the People's Republic of China

T/CASME 839-2023 Method for determination of dimethyl sulfate in ciprofloxacin hydrochloride
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/CLIAS 008-2023 Test method of polyacrylic resin retanning agent for leather-making
T/NAIA 012-2020 Determination of Soil Phosphatase Activity by Colorimetric Method of Disodium Phenyl Phosphate
T/ZJATA 0011-2022 Soil-Determination of organic acids (formic acid, acetic acid, propionic acid, acrylic acid)-High performance liquid chromatography
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products

国家质量监督检验检疫总局

SN/T 4587-2016 Determination methods of total content of cis-2-butenedioicacid and cis-2-butenedioic anhydride in foods for export

Professional Standard - Agriculture

HJ 1288-2023 Water quality-Determination of acrylic acid-Ion chromatography
HJ 1316-2023 Stationary source emission―Determination of acrylic acid and methacrylic acid―High performance liquid chromatography

Professional Standard - Tobacco

YC/T 410-2011 Determination of acrylic acid and methacrylic acid in water-borne adhesives applied on polypropylene tow for making cigarette filter rod—High performance liquid chromatographic method

Yunnan Provincial Standard of the People's Republic of China

DB53/T 477-2013 Determination of phosphorus pentoxide content in phosphate rock Citric acid-aluminum nitrate-nitric acid dissolved sample phosphomolybdic acid quinoline volumetric method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39694-2020 Hydrogenated acrylonitrile-butadiene rubber (HNBR)—General specification and evaluation procedure

Shandong Provincial Standard of the People's Republic of China

DB37/T 4151-2020 Determination of Acrylic Acid in Water by Ion Chromatography

Anhui Provincial Standard of the People's Republic of China

DB34/T 1532-2011 Determination of Diallyo(o-)phthalate in food plastic packing materials Gas Chromatography-Mass Spectrometry method

American Society for Testing and Materials (ASTM)

ASTM D7597-09e2 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chro
ASTM D4415-91(2000)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D4415-91(1996)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D4415-05 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93(2000) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D3594-93(2013) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D4094-00 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
ASTM E1788-16 Standard Test Method for Acidity in Acrylonitrile
ASTM D3125-97 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D3125-97(2001) Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM E1788-96(2003) Standard Test Method for Acidity in Acrylonitrile
ASTM E1788-96 Standard Test Method for Acidity in Acrylonitrile
ASTM E1788-08 Standard Test Method for Acidity in Acrylonitrile
ASTM D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
ASTM D3125-06 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D3125-06(2012) Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D4773-93(1998) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D7597-16(2024) Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and
ASTM D4773-02(2012) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D7597-09 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and
ASTM F2118-03 Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
ASTM D3187-06(2011) Standard Test Methods for Rubbermdash;Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D7597-09e1 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and
ASTM F2118-01 Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
ASTM D3187-00 Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D4773-02 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D3187-06 Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D4773-02(2007) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D7597-16 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liqu
ASTM D7597-16(2017) Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and
ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
ASTM D6865-04 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
ASTM D3187-06(2016) Standard Test Methods for Rubber&x2014Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D7106-05 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM D6047-17 Standard Test Methods for Rubber, Raw&x2014Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6047-99(2003) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D3568-03(2013) Standard Test Methods for Rubbermdash;Evaluation of EPDM 40;Ethylene Propylene Diene Terpolymers41; Including Mixtures With Oil
ASTM D6047-99(2009) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D3187-06(2021) Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D3362-05 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
ASTM D6047-99(2014) Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D5492-98(2003)e1 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM D6047-15 Standard Test Methods for Rubber, Raw&x2014Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM F2806-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

Society of Automotive Engineers (SAE)

SAE AMS3248B-1990 Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55-65
SAE AMS3248C-2010 Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55-65
SAE AMS-A-8576-1997 Adhesive, Acrylic Base, for Acrylic Plastic
SAE AMS7262B-1988 Rings, Sealing, Ethylene Propylene (EPM) Rubber, Phosphate Ester Hydraulic Fluid Resistant, 85 95
SAE AS3551A-2020 O-Ring Molded from AMS7272 Butadiene-Acrylonitrile Rubber (NBR)

Association Francaise de Normalisation

NF D11-140:2010 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods.
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF T20-803:1976 Propylene. Determination of the propene and propadine. Gas phase chromatographic method.
NF T53-038-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T53-038-2*NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF D11-141*NF EN 15720:2010 Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
NF D11-120*NF EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods
NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) materials for molding and extrusion - Part 2: preparation of specimens and determination of properties
NF EN ISO 2507-3:2017 Tubes and fittings made of thermoplastic materials - Vicat softening temperature - Part 3: special test conditions for tubes and fittings made of acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA)
NF T20-476:1973 Phosphoric acid for industrial use. Determination of total phosphoric pentoxide content. Gravimetric method using quinoline phosphomolybdate.
NF T20-486:1973 SODIUM TRIPOLYPHOSPHATE AND PYROPHOSPHATE FOR INDUSTRIAL USE ; DETERMINATION OF TOTAL PHOSPHORIC PENTOXIDE ; GRAVIMETRIC METHOD USING QUINOLINE PHOSPHOMOLYBDATE.
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF L46-030*NF EN 6075:2017 Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 oC to 107 oC) - Inch series
NF T20-816*NF ISO 8174:1987 Ethylene and propylene for industrial use. Determination of acetone, acetonitrile, propan-2-ol and methanol. Gas chromatographic method.

International Organization for Standardization (ISO)

ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 10366-2:1994 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 19066-2:2020 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 1385-2:1977 Phathalate esters for industrial use; Methods of test; Part II : Measurement of colour after heat treatment (Diallyl phthalate excluded)
ISO 10366-1:1993 Plastics; methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials; part 1: designation system and basis for specifications
ISO 10366-1:2002 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materialsPart 1:Designation system and basis for specifications
ISO 8174:1986 Ethylene and propylene for industrial use; Determination of acetone, acetonitrile, propan-2-ol and methanol; Gas chromatographic method
ISO 1390-4:1977 Maleic anhydride for industrial use; Methods of test; Part IV : Determination of maleic anhydride content; Titrimetric method
ISO 2507-3:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)

German Institute for Standardization

DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19066-2:2020-07 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020); German version EN ISO 19066-2:2020
DIN EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003
DIN EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods; English version of DIN EN 198:2008-11
DIN EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN 54217:1975 Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method
DIN EN 6075:2017-07 Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series; German and English version EN 6075:2017

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)

Danish Standards Foundation

DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

British Standards Institution (BSI)

BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 19066-2:2020 Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003(2004) Plastics — Methyl methacrylate - acrylonitrile - butadiene - styrene (MABS) moulding and extrusion materials — Part 2 : Preparation of test specimens and determination of properties
BS EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods
BS 2690-15:1974 Methods of testing water used in industry - Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
BS 4427-12:1979 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including foodstuffs) - Determination of arsenic content - Silver die
19/30389026 DC BS EN ISO 19066-2. Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
BS 4258-5:1989(1999) Methods of test for Phosphoric acid (orthophosphoric acid) for industrial use — Part 5 : Determination of silica content
BS EN 15719:2010 Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
BS EN 15719:2009 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
BS 2690-15:1974(1999) Methods of testing Water used in industry — Part 15 : Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
BS EN 15720:2010 Sanitary appliances. Shower trays made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
BS EN 15720:2009 Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
BS EN 6075:2017 Aerospace series. Static seal elements O-Ring ethylene- propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C). Inch series
BS 4427-15:1982 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including foodstuffs) - determination of oxides of nitrogen content -
BS 4427-2:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Measurement of pH value of sodium tripolyphosphate
BS ISO 24698-1:2008 Rubber, raw - Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Combustion (Dumas) method
BS EN ISO 2507-3:2017 Thermoplastics pipes and fittings. Vicat softening temperature.Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

GSO

GSO 753:1997 METHODS OF TESTING ACRYLIC BLANKETS
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
OS GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
BH GSO ISO 10366-2:2016 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GSO ISO 3357:2015 Sodium tripolyphosphate and sodium pyrophosphate for industrial use -- Determination of total phosphorus(V) oxide content -- Quinoline phosphomolybdate gravimetric method
GSO ISO 8174:2008 Ethylene and propylene for industrial use - Determination of acetone, acetonitrile, propan-2-ol and methanol - Gas chromatographic method

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 10366-1:2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

SCC

DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
BS EN ISO 10366-2:2003 Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BS EN ISO 10366-2:1999 Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
CAN/CGSB-4.2 No.14.6-M91-1991 Textile testing methods Quantitative analysis of fiber mixtures - Binary mixtures containing acrylic or modacrylic fibers - Cyclohexanone method
CAN/CGSB-4.2 No.14.5-M91-1991 Textile testing methods Quantitative analysis of fiber mixtures - Binary mixtures containing acrylic or modacrylic fibers - Butyrolactone method
BS 6064:1981 Methods of test for raw acrylonitrile-butadiene (NBR) rubber
BS 4258-5:1975 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use-Determination of silica content
DANSK DS/EN ISO 10366-2:2004 Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DANSK DS/ISO 19066-2:2020 Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
BS 6063:1981 Methods of test for non-oil extended raw general purpose ethylene-propylene-diene rubbers (EPDM)
AS 2001.7.11:1983 Methods of test for textiles, Part 7.11: Quantitative analysis of fibre mixtures - Binary mixtures of acrylics, certain modacrylics or certain chlorofibres (method using dimethylformamide)
AENOR UNE-EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
DANSK DS/EN ISO 19066-2:2020 Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
NS-EN ISO 10366-2:2003 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
NS-EN ISO 19066-2:2020 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
NS-EN ISO 10366-2:1999 Plastics — Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994)
BS 4935:1989 Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
DIN EN ISO 19066-2 E:2019 Draft Document - Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 19066-2:2019); German and English version prEN ISO ...
CAN/CGSB 4.2 No.14.5-M91-1991 Méthodes pour épreuves textiles - Analyse quantitative des mélanges de fibres - Mélanges binaires contenant des fibres acryliques ou modacryliques - Méthode au butyrolactone
NS-EN 6075:2017 Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series
DANSK DS/EN 6075:2017 Aerospace series – Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) – Inch series
CAN/CGSB-3.0 No./No.94.1-M87-1987 Methods of Testing Petroleum and Associated Products Phosphate Content of Inhibited Glycols
ASD-STAN prEN 6086:1970 Aerospace series - Static seal elements square ring ethylene propylene, moulded, phosphate ester resistant (- 55 deg C to 107 deg C) - Inch series
AS A161:1969 Baths for domestic purposes made from cast acrylic sheet
AENOR UNE-EN ISO 2507-3:2018 Tubes and accessories in thermoplastic materials. Vicat softening temperature. Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) tubes and fittings. (ISO 2507-3:1995).
BS 4135:1967 Sinks for domestic purposes made from cast acrylic sheet
BS 4427-7:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use-Estimation of tripolyphosphate (triphosphate) content of sodium tripolyphosphate
BS 4427-3:1969 Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate).-Determination of iron content

Japanese Industrial Standards Committee (JISC)

JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6938-2:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6938-2:2007 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6874:1995 Testing methods for ABS resins
JIS K 6861:1995 Testing methods for alpha-cyanoacrylate adhesives
JIS K 6938-1:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6938-1:2006 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6758:1995 Testing methods for polypropylenes
JIS K 6759:1995 Testing methods for acrylonitrile

European Committee for Standardization (CEN)

EN ISO 10366-2:1999 Plastics - Methyl Methacrylate/Acrylonitrile/Butadiene/Styrene (MABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 10366-2:1994
EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 10366-2:2003 Plastics Methyl methacrylate - acrylonitrile - butadiene- styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties ISO 10366-2:2003
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 10366-1:1999 Plastics - Methyl Methacrylate/Acrylonitrile/Butadiene/ Styrene (MABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications ISO 10366-1:1993
EN 15720:2009 Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
EN ISO 2580-2:1999 Plastics - Acrylonitrile/Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 2580-2: 1994
EN 6075:2017 Aerospace series - Static seal elements O-Ring ethylene - propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series
EN 12476:2000 Phosphate Conversion Coatings of Metals - Method of Specifying Requirements

SAE - SAE International

SAE AMS7262C-2001 Rings@ Sealing@ Ethylene Propylene (EPM) Rubber Phosphate Ester Hydraulic Fluid Resistant 58 - 95
SAE AMS7262B-1994 Rings@ Sealing@ Ethylene Propylene (EPM) Rubber Phosphate Ester Hydraulic Fluid Resistant 58 - 95

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

Korean Agency for Technology and Standards (KATS)

KS M ISO 10366-2-2021 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2:2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2:2006 Plastics-Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 10366-2-2016(2021) Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 1918-2002(2007) Maleic anhydride for industrial use－Methods of test－Determination of maleic anhydride content－Titrimetric method
KS M ISO 12092-2005(2015) Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride)(PVC－U), chlorinated poly(vinyl chloride) (PVC－C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-
KS M 3724-2015 Testing methods for α－cyanoacrylate adhesives
KS M 3724-1987 Testing methods for α-cyanoacrylate adhesives
KS M 3724-2002(2012) Testing methods for α－cyanoacrylate adhesives
KS M 3724-2002 Testing methods for α-cyanoacrylate adhesives
KS M ISO 8174:2007 Ethylene and propylene for industrial use－Determination of acetone, acetonitrile, propan－2－ol and methanol－Gas chromatographic method
KS M 3017-2021 Testing methods for acrylonitrile
KS M ISO 8174:2017 Ethylene and propylene for industrial use — Determination of acetone, acetonitrile, propan-2-ol and methanol — Gas chromatographic method
KS M ISO 7246:2012 Pipes and fittings of acrylonitrile/styrene/acrylester(ASA)－General specification for moulding and extrusion materials
KS M ISO 24698-1:2021 Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) —Part 1: Combustion (Dumas) method
KS M 3017-2016(2021) Testing methods for acrylonitrile
KS M 3017-2016 Testing methods for acrylonitrile

GM Europe

GME QK 001909-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000642-2005 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000626-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German
GME QK 000638-2005 Blends of polybutylene terephthalate (PBT) and acrylic-styrene-acrylonitrile copolymer (ASA) with glass fibers English/German
GME QK 000637-2005 Blend from PBT and ASA with Glass Fibres (English/German)
GME QK 000633-2007 Blends of polybutylene terephthalate (PBT) and acrylic-styrene-acrylonitrile copolymer (ASA) with glass fibers English/German
GME QK 000626-2010 Blend from PBT and ASA with Glass Fibres (Issue 4; English/German)
GME QK 000642-2010 Blend from PBT and ASA with Glass Fibres (Issue 3; English/German)
GME QK 000195-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000227-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German

KR-KS

KS M ISO 10366-2-2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 24698-1-2021 Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) —Part 1: Combustion (Dumas) method

ES-UNE

UNE-EN ISO 19066-2:2021 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
UNE-EN 6075:2017 Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series (Endorsed by Asociación Española de Normalización in June of 2017.)

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 6086-2004 Aerospace series Static seal elements square ring ethylene-propylene, moulded, phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series (Edition P 1)
ASD-STAN PREN 6076-2004 Aerospace series Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series Edition P 1
ASD-STAN PREN 6075-2004 Aerospace series Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series Edition P 1

CZ-CSN

CSN 66 1976-1988 Acrylic acid esters Sampling and methods of testing

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS1611-2014 PACKING, ETHYLENE PROPYLENE, PREFORMED O-RING, PHOSPHATE ESTER RESISTANT (-65 °F TO 250 / 300 °F) (Rev 12)
AIA/NAS NAS1612-2014 PACKING, ETHYLENE PROPYLENE PREFORMED, O-RING PHOSPHATE ESTER RESISTANT, STRAIGHT THREAD TUBE FITTING BOSS (-65 °F TO 250/300 °F) (Rev 8)

RU-GOST R

GOST 24596.1-2015 Feed phosphates. Methods of sampling and preparations of samplefor analysis
GOST 30713-2000 Polyacrylonitrile fibre. Determination of the concentration of acrylonitrile migration in air. Method of gas chromatography
GOST 24596.2-2015 Feed phosphates. Methods for determination of phosphorus
GOST R 56500-2015 Acrylic sheets for aircraft glazing. Methods for determination of optical characteristics
GOST R ISO 1390-4-1993 Maleic anhydride for industrial use. Methods of test. Part 4. Determination of maleic anhydride content. Titrimetric method
GOST R ISO 1390/4-1993 Maleic anhydride for industrial use. Methods of test. Part 4. Determination of maleic anhydride content. Titrimetric method

IT-UNI

UNI 7041-1972 Acrylonitrile. Butadiene. Styrene (ABS) thermoplastic material. Classification
UNI 7702-1977 Elastic material. Raw materials and ingredients. Butadiene, acrylonitrile rubber (NBR). Preparation and vulcanization of mixtures for evaluation of test methods

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1611-2014 PACKING@ ETHYLENE PROPYLENE@ PREFORMED O-RING@ PHOSPHATE ESTER RESISTANT (-65 °F TO 250 / 300 °F) (Rev 12)
NAS1611-2003 Packing@ Ethylene Propylene Preformed O-Ring Phosphate Ester Resistant (-65 Degrees F to 250/300 Degrees F) (Rev 8)
NAS1611-2002 Packing@ Ethylene Propylene Preformed O-Ring Phosphate Ester Resistant (-65 Degrees F to 250/300 Degrees F) (Rev 7)
NAS1611-1994 Packing@ Ethylene Propylene Preformed O-Ring Phosphate Ester Resistant (-65 Degrees F to 250/300 Degrees F) (Rev 5)
NAS1611-2010 PACKING@ ETHYLENE PROPYLENE@ PREFORMED O-RING@ PHOSPHATE ESTER RESISTANT (-65 DEGREES F TO 250 / 300 DEGREES F) (Rev 11)

YU-JUS

JUS H.B8.730-1982 S-[1, 2-bis(ethoxycarbonyl)-ethyl] 0,0-dimethyl phosphorodithioate (Malathion), technical. Determi- nation ofdiethyl tumarate content
JUS H.B8.441-1984 Fhthalate esters (diallyl phthalate excluded) for industrial use. Measurement of coiour after heat treatment in Hazen units. Colorimetric method
JUS G.C1.079-1987 Rubber, ethylene-propylene

American National Standards Institute （ANSI)

ANSI/ASTM D5492:1998 Test Method for Determination of Xylene Solubles in Propylene Plastics

PL-PKN

PN C04258-08-1986 Rubber test mixes Acrylonitrile-butadiene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-09-1988 Rubber test mixes Ethylene-propylene diene rubbers Test formu?a, preparation, vulcanisation and testing of properties

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 6086-2004 Aerospace series Static seal elements square ring ethylene-propylene@ moulded@ phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series (Edition P 1)

HU-MSZT

MSZ 431-1982 Sampling methods for ethylene and propylene

RO-ASRO

STAS 11557-1982 RUBBER Test recipe for testing rubber acrylonil rile-butadiene

ES-AENOR

UNE 53-380 Pt.2-1990 Pressure water conduit made of propylene. Part 2: Characteristics and test methods of propylene-ethylene copolymers
UNE 53-380 Pt.2-1991 Pressure water conduit made of propylene. Part 2: Characteristics and test methods of propylene-ethylene copolymers

Indonesia Standards

SNI 02-2857-1992 Single and double superphospate fertilizer, Specification and test methods

VN-TCVN

TCVN 6147-3-2003 Thermoplastics pipes and fittings.Vicat softening temperature.Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

Others: