Rubber hardness comparison table

Rubber hardness comparison table, Total:360 items.

The international standard classification for "Rubber hardness comparison table" includes: Rubber and plastics products in general , Rubber , Equipment for the chemical industry , Other rubber and plastics products , Rubber and plastics products , Plastics .

The Chinese standard classification for "Rubber hardness comparison table" includes: Other rubber products , Rubber products in general , Special chemical instrument and meter , Basic standards and general methods for synthetic resin and plastic , Basic standard and general method for synthetic rubber , Nonmetal material testing machine .

化学工业部

HG/T 2450-1993 Determination of apparent hardness of rubber rollers International rubber durometer method

Professional Standard - Chemical Industry

HG/T 3863-2008 Ebonite-Determination of crushing strength
HG/T 2413.2-1992 Rubber-covered Rollers - Determination of Apparent Hardness: Shore Hardness Tester Method
HG/T 2117-1991 Medium hardness of conventional international rubber hardness machine
HG/T 3077-1999 Requirements for hardness of rubber or plastics covered rollers
HG/T 3844-2008 Ebonite-Determination of cross breaking strength
HG/T 2116-1991 Conventional international rubber hardness machine with high hardness
HG 2116-1991 Conventional International Rubber Hardometer - High Hardness
HG/T 2450-1999 Rubber -- Covered rollers -- Determination of apparent hardness : IRHD method
HG/T 3845-2008 Ebonite-Determination of impact strength
HG/T 3077-1988 Requirements for hardness of rubber or plastics covered rollers
HG/T 2118-1991 Conventional international rubber hardness machine with low hardness
HG 2117-1991 Conventional International Rubber Hardometer - Medium Hardness
HG/T 3846-2008 Ebonite-Determination of hardness by means of a durometer
HG 2118-1991 Conventional International Rubber Hardometer - Low Hardness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 39693.8-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 23651-2009 Rubber vulcanized or thermoplastic - Hardness testing - Introduction and guide
GB/T 25940-2010 IRHD dead-load testers
GB/T 2411-2008 Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 2438-2002 Ebonite--Determination of crushing strength
GB/T 531.1-2008 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness）
GB/T 1698-2003 Ebonite--Determination of hardness by means of a durometer
GB/T 531-1999 Rubber-Determination of indentation hardness by means of pocket hardness meters
GB/T 6031-1998 Rubber,vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 1697-2001 Ebonite-Determination of impact strength
GB/T 531.2-2009 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale
GB/T 39693.6-2020 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 6:Apparent hardness of rubber-covered rollers by IRHD method
GB/T 38243-2019 Rubber—Calibration and verification of hardness testers

未注明发布机构

DIN ISO 27588:2010-05 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DIN ISO 48-3 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
DIN ISO 27588 E:2014-05 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ASTM RR-D11-1091 2000 D2240- Standard Test Method for Rubber Property—Durometer Hardness
DIN ISO 48-8 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method

Liaoning Provincial Standard of the People's Republic of China

DB2104/T 0026-2023 Root diameter - DBH comparison table
DB2104/T 0027-2023 Ground diameter-diameter at breast height comparison table

Group Standards of the People's Republic of China

T/ZZB 0553-2018 Dual-hardness silicone nipple

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Taiwan Provincial Standard of the People's Republic of China

CNS 5140-1980 Method of Test for Cross-Breaking Strength of Ebonite

Professional Standard - Aviation

HB 5234-1983 Test Method for Hardness of O-shaped Rubber Ring

SCC

AS B69:1940 Table of approximate comparison of hardness scales
UNE 53549:1991 RUBBER. DETERMINATION OF HARDNESS IN (IRHD) INTERNATIONAL RUBBER HARDNESS DEGREES
BS 3734:1964 Schedule of tolerances for rubber products in solid rubber and ebonite
07/30164021 DC BS ISO 27588. Rubber, vulcanized or thermoset. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DANSK DS/ISO 48:2016 Rubber, vulcanized or thermoplastic – Determination of hardness (hardness between 10 IRHD and 100 IRHD)
DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 27588:2008 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
09/30193391 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness)
06/30130350 DC ISO 48. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS EN ISO 868:1998 Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
NS-EN ISO 868:1997 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985)
NS-EN ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
DIN ISO 27588 E:2014 Draft Document - Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
BS 903-A57:1989 Physical testing of rubber-Determination of indentation hardness by means of pocket hardness meters
AENOR UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
BS 903-C1:1956 Methods of testing vulcanized rubber. Determination of surface resistivity of insulating soft vulcanized rubber and ebonite
BS 903-C2:1956 Methods of testing vulcanized rubber. Determination of surface resistivity of insulating soft vulcanized rubber and ebonite
BS ISO 7267-3:2007 Rubber-covered rollers. Determination of apparent hardness-Pusey and Jones method

PL-PKN

PN C94126-1966 Schedule of tolerances for products in rubber and ebonite
PN C04203-1987 Rubber Determination of hardnes according to international scais (IRH) in rang? of 10 H- 100 IRHD

British Standards Institution (BSI)

BS ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - IRHD method
BS ISO 7267-1:2009 Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS EN 2429:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD
BS EN 2431:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD
BS EN 2260:1995 Silicone rubber (VMQ) - Hardness 60 IRHD
BS EN 2430:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD
BS EN 2432:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD
BS EN 2261:1995 Silicone rubber (VMQ) - Hardness 70 IRHD
BS EN 2428:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD
BS EN 2259:1995 Silicone rubber (VMQ) - Hardness 50 IRHD
BS ISO 7267-2:2009 Rubber-covered rollers. Determination of apparent hardness. Shore-type durometer method
BS ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Shore-type durometer method
BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN 2104:1996 Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 48-7:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Shore-type durometer method
BS ISO 48-6:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by IRHD method
BS EN 2259:1995(1999) Silicone rubber (VMQ) — Hardness 50 IRHD
BS EN 2260:1995(1999) Silicone rubber (VMQ) — Hardness 60 IRHD
BS ISO 48-3:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 48-8:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Pusey and Jones method
BS EN 2841:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD
BS 903-A21.1:1997 Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90 peel method
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 27588:2009 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS EN 2838:2013 Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD
BS EN 2843:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD
BS 7442 Sec.4.1:1992 Rubber or plastics covered rollers. Requirements. Specification for apparent hardness
BS 7442-4.1:1992 Rubber or plastics covered rollers - Requirements - Specification for apparent hardness
BS EN 2844:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD
BS 903-A21.2:1997 Physical testing of rubber - Determination of rubber to metal bond strength - Two plate method
BS EN ISO 21509:2015 Plastics and ebonite. Verification of Shore durometers
BS EN 3827:2014 Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 80 IRHD
BS EN 3698:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
BS EN 2849:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD
BS EN 3826:2014 Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD
BS EN 2842:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD
BS ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
BS EN 2840:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS ISO 18517:2008 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
BS ISO 19979:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)

Association Francaise de Normalisation

NF T47-404-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method.
NF T46-052:1988 Vulcanized or thermoplastic rubber. Determination of identation hardness by means of type shore pocket hardness meters.
NF T46-003-7*NF ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7 : apparent hardness of rubber-covered rollers by Shore-type durometer method
NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
NF T46-003-6*NF ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6 : apparent hardness of rubber-covered rollers by IRHD method
NF T46-003-8*NF ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8 : apparent hardness of rubber-covered rollers by Pusey and Jones method
XP T47-814:2007 Rubber bearings - Determination of apparent Shore A hardness using a pocket durometer
NF ISO 48-7:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 7: apparent hardness of rubber-coated cylinders by the Shore type durometer method
NF ISO 48-4:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 4: penetration hardness by the durometer method (Shore hardness)
NF T46-003-3*NF ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3 : dead-load hardness using the very low rubber hardness (VLRH) scale
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF ISO 48-6:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 6: apparent hardness of rubber-coated cylinders by the DIDC method
NF T46-025:1981 Rubber. Determination of stiffness of vulcanized rubber (cehemann test).
NF T47-404-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method.
NF ISO 48-8:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 8: apparent hardness of rubber-coated cylinders by the Pusey and Jones method
NF T46-052-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1 : durometer method (Shore hardness).
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
NF L17-010*NF EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
NF L17-311*NF EN 2837:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD.
NF L17-013*NF EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
NF T51-123*NF EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
NF EN ISO 21509:2015 Plastiques et ébonite - Vérification des duromètres Shore
NF L17-006*NF EN 2843:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD
NF L17-011*NF EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
NF T46-003:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD).
NF EN ISO 868:2003 Plastics and ebonite - Determination of penetration hardness using a durometer (Shore hardness)
NF L17-309*NF EN 2836:2012 Aerospace series - Chloroprene rubber (CR) -Heat resistance - Hardness 50 IRHD.
NF L17-308*NF EN 2835:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD
NF T51-174:1998 Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF L17-009*NF EN 2849:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
NF T46-003-9*NF ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9 : calibration and verification of hardness testers
NF L17-017*NF EN 2848:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD
NF L17-016*NF EN 2846:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD
NF L17-014*NF EN 2845:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD
NF T46-084:2012 Rubber - Calibration and verification of hardness testers.
NF T46-003-2*NF ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2 : hardness between 10 IRHD and 100 IRHD

International Organization for Standardization (ISO)

ISO 7267-1:1997 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
ISO 7267-1:1986 Rubber-covered rollers; Determination of apparent hardness; Part 1 : IRHD method
ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
ISO 7267-2:1986 Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 48:1994 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-type durometer method
ISO 7619-1:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 7619:1997 Rubber - Determination of indentation hardness by means of pocket hardness meters
ISO 48:1994/Amd 1:1999 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD); Amendment 1
ISO 27588:2012 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 27588:2008 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 7267-1:2017 Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 6907:1994 Rubber footwear - Vulcanized resin rubber and vulcanized high-hardness rubber soling material - Specifications
ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
ISO 13226:2011 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 13226:2018 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 18898:2006 Rubber - Calibration and verification of hardness testers
ISO 2474:1972 Ebonite; Determination of crushing strength
ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
ISO 2039:1973 Plastics and ebonite — Determination of hardness by the ball indentation method
ISO 7267-3:2017 Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method
ISO 7619-1:2004/Amd 1:2008 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness); Amendment 1: Precision data
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method

GM Europe

GME OPEL 100-1974 Steel and cast steel hardness comparison table (German)
GME STD 1869-1980 Rubber Hardness conversions Gummi H錼dhetsj鋗f鰎elser English/Swedish

Korean Agency for Technology and Standards (KATS)

KS M ISO 7267-1:2010 Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method
KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
KS M ISO 27588-2021 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 7619-1-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 7619-1-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 7267-2:2010 Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
KS M ISO 48-2023 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M 6784-2009 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 27588:2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 27588:2010 Rubber, vulcanized or thermoplastic-Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M 6784-1994 Hardness testing methods for vulcanized rubber
KS M 6511-2001 Testing methods for IRHD for vulcanized rubbers
KS M 6784-1999 Hardness testing methods for vulcanized rubber
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 6907-2008(2013) Rubber footwear－Vulcanized resin rubber and vulcanized high-hardness rubber soling materials－Specification
KS M ISO 21509-2019 Plastics and ebonite — Verification of Shore durometers
KS M ISO 21509:2014 Plastics and ebonite — Verification of Shore durometers
KS M ISO 6907-2021 Rubber footwear－Vulcanized resin rubber and vulcanized high-hardness rubber soling materials－Specification
KS M ISO 7619-2-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 7619-2-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 6907:2008 Rubber footwear－Vulcanized resin rubber and vulcanized high-hardness rubber soling materials－Specification
KS M ISO 18898:2015 Rubber－Calibration and verification of hardness testers
KS M ISO 18517-2017(2022) Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS M ISO 18898:2021 Rubber — Calibration and verification of hardness testers
KS M ISO 7619-2:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method

RO-ASRO

STAS 5441/1-1974 VULCANIZED ELASTOMERES Determination of hardness expressed in International Rubber Hard Degree
STAS 5441/3-1975 VULCAN IZED RUBBERS Determination cf hardness of vulcanizcd rubbers cf high hardness
STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

Danish Standards Foundation

DS/ISO 7267/1:1987 Rubber covered rollers. Determination of apparent hardness. Part 1: IRHD method
DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters
DS/ISO 7267/2:1987 Rubber covered rollers. Determination of apparent hardness. Part 2: Shore durometer method

CZ-CSN

CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
CSN 62 1433-1981 Vulcanized rubbers. Determination of hardness. (Hardness between 30 and 85 IRHD)

German Institute for Standardization

DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
DIN ISO 48-8:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN EN 2429:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995
DIN ISO 48-3:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN EN 2430:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995
DIN EN 2431:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995
DIN ISO 48-3:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN EN 2432:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN ISO 48-8:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN ISO 7619-1:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
DIN EN 2260:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995
DIN EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
DIN EN 2259:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995
DIN EN 2261:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995
DIN EN 2428:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995
DIN ISO 27588:2014 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
DIN 7714:1975 Ebonite pipes
DIN 7714:1975-02 Ebonite pipes

PK-PSQCA

PS 413-1964 DETERMINATION OF HARDNESS OF RUBBERS

GSO

OS GSO ISO 27588:2013 Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
GSO ISO 48:2015 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
GSO ISO 21509:2013 Plastics and ebonite -- Verification of Shore durometers
GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
BH GSO ISO 21509:2016 Plastics and ebonite -- Verification of Shore durometers
OS GSO ISO 18517:2014 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
GSO ISO 48-9:2021 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
BH GSO ISO 48-9:2022 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers

HU-MSZT

MSZ 494-1967 Rubber hardness test
MNOSZ 13594-1955 Determination of bending hardness of hard rubber
MSZ KGST 1198-1978 Determination of hardness of type A rubber
MNOSZ 18806-1955 hard rubber
MI 14026/8-1971 Rubber belt testing. Extension hardness testing

SE-SIS

SIS 16 22 01-1962 Rubber. Determination of hardness
SIS 16 22 23-1974 Rubber. Determination of low hardness (10 — 35 IRHD)
SIS 16 22 24-1974 Rubber. Determination of high hardness (85 — 100 IRHD)

TR-TSE

TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER
TS 2875-1977 Vulcanized Rubbers of Low Hardness (10 To 35IRHD) Determination of Hardness
TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness
TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2708-1977 EBONITE - DETERMINATION OF CRUSHING STRENGTH

KR-KS

KS M ISO 27588-2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 48-2018(2023) Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M ISO 7619-1-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 18898-2021 Rubber — Calibration and verification of hardness testers

PT-IPQ

NP 2918-1988 Rubber, vulcanized Determination of hardness (hardness between 10 and 35 IRHD)
NP 2916-1988 Vulcanized rubbers Determination of hardness (hardness between 30 and 85 IRHD)
NP 2917-1988 Rubber, vulcanized Determination of hardness (hardeness between 85 and 100 IRHD)
NP ISO 7619:2001 Rubber Determination od indentation hardness by means of packet hardness meters

DIN

DIN ISO 27588:2010 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2008)
DIN ISO 48:2016 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)

ZA-SANS

SANS 10048:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 7619-1:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)
SANS 5870:1976 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 5870:2008 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 7619-2:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method
SANS 5650:1972 Determination of hardness of elastomeric material
SANS 7619:2003 Rubber - Determination of indentation hardness by means of pocket hardness meters

Society of Automotive Engineers (SAE)

SAE AMS3301G-2007 Silicone, Rubber General Purpose 40 Durometer
SAE AMS3304H-2016 Silicone, Rubber General Purpose 70 Durometer
SAE AMS3304G-2001 Silicone, Rubber General Purpose 70 Durometer
SAE AMS3303J-2007 Silicone, Rubber General Purpose 60 Durometer
SAE AMS3305H-2001 Silicone, Rubber General Purpose 80 Durometer
SAE AMS3302G-2007 Silicone Rubber General Purpose 50 Durometer
SAE AMS3303K-2011 Silicone Rubber, General Purpose, 60 Durometer
SAE AMS3198K-1993 Sponge, Chloroprene (CR) Rubber Medium Stiffness
SAE AMS3301H-2011 Silicone Rubber, General Purpose, 40 Durometer
SAE AMS3198L-2014 Sponge, Chloroprene (CR) Rubber, Medium Stiffness
SAE AMS3304G-1990 Silicone, Rubber General Purpose 70 Durometer
SAE AMS3305J-2014 Silicone@ Rubber General Purpose 80 Durometer
SAE AMS3302G-1990 Silicone Rubber General Purpose 50 Durometer
SAE AMS3305H-1990 Silicone, Rubber General Purpose 80 Durometer
SAE AMS3303J-1990 Silicone, Rubber General Purpose 60 Durometer
SAE AMS3301G-1990 Silicone, Rubber General Purpose 40 Durometer
SAE AMS3304J-2019 Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 65 – 75 Durometer Type ‘A’ Hardness
SAE AMS3302H-2011 Silicone Rubber, General Purpose, 50 Durometer

Japanese Industrial Standards Committee (JISC)

JIS K 6253-3:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-2:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)
JIS K 6253-3:2023 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-5:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 5: Calibration and verification of hardness testers
JIS K 6253:2006 Rubber, vulcanized or thermoplastic -- Determination of hardness

BR-ABNT

ABNT P-MB-497-1969 Vulcanized elastomer hardness

VDI - Verein Deutscher Ingenieure

VDI/VDE 2616 Blatt 2-2000 Hardness testing of plastics and rubber
VDI/VDE 2616 Blatt 2-1986 Hardness testing of plastics and rubber
VDI/VDE 2616 Blatt 2-1996 Hardness testing of plastics and rubber

European Committee for Standardization (CEN)

EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD
EN 2836:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD
EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN 2849:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
EN 3827:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
EN 3825:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD
EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
EN 3826:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD
EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

AENOR

UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
UNE-ISO 48:2008 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

IL-SII

S.I.722-1968 TESTING OF HARDNESS OF VULCANIZED RUBBER

Indonesia Standards

SNI 06-4999-1999 Determination of hardness of vulcanized rubber by shore durometer
SNI ISO 48:2012 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SNI 06-1846-1990 Rubber roll hardness for tanning leather machine
SNI ISO 18517:2012 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide

VN-TCVN

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)

TH-TISI

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

United States Navy

NAVY ZZ-R-710 A-1967 RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS
NAVY ZZ-G-710 B-1993 GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS
NAVY MIL-PRF-900 F-1973 RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
NAVY MIL-R-900 F VALID NOTICE 1-1991 RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS

FI-SFS

SFS-ISO 868 E:1986 This standard is approved in English

RU-GOST R

GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)

YU-JUS

JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness

ES-UNE

UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2112-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 70 IRHD
PREN 2111-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 60 IRHD
PREN 2113-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 80 IRHD
PREN 2110-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 50 IRHD

American Society for Testing and Materials (ASTM)

ASTM D2240-15 Standard Test Method for Rubber Property&x2014Durometer Hardness
ASTM D2240-05(2010) Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D2240-02 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D2240-15(2021) Standard Test Method for Rubber Property—Durometer Hardness
ASTM D2240-15e1 Standard Test Method for Properties of Rubber &8212; Durometer Hardness

SAE - SAE International

SAE AMS3305K-2019 Silicone, Rubber General Purpose 80 Durometer

BE-NBN

NBN T 31-002-1976 Vulcanized rubbers - indentation hardness by means of a Shore duro-meter
NBN T 31-001-1976 Vulcanized rubbers - Determination of hardness (hardness between 30 and 85 I.R.H.D.)

Lithuanian Standards Office

LST EN ISO 868:2004 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

(U.S.) Ford Automotive Standards

FORD WSE-M2D412-A-2010 SILICONE (VMQ) RUBBER, 70 IRHD HARDNESS, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***