aging laboratory

aging laboratory, Total:307 items.

The international standard classification for "aging laboratory" includes: Products of the chemical industry , Materials for aerospace construction , Plastics , Rubber , Road vehicle tyres , Energy and heat transfer engineering in general , Mineral materials and products , Waterproofing , Footwear , Films and sheets , Adhesives , Insulating gases , Rubber compounding ingredients .

The Chinese standard classification for "aging laboratory" includes: Composite materials and solid fuels , Basic laboratory equipment , Basic standards and general methods for synthetic resin and plastic , Rubber products in general , Tyre , Technical management , Papermaking in general , Masonry product , Roof and pavement waterproof and barrier material , Footgear , Latex products , Basic standards and general methods for adhesives , Insulating parts for electronic equipment , Basic standards and general methods for chemical additive , Petroleum asphalt .

Professional Standard - Aviation

HB 5247-1993 Method for Accelerated Weathering Test in Hot Air for Vulcanized Sealant at Room Temperature
HB 5251-1983 Method for Hot Air Aging Test of O-shaped Rubber Ring
HB 5319-1993 Test Method for Thermal Ageing of Anaerobic Adhesive for Aviation
HB 5320-1993 Test Method for Heat Aging of Anaerobic Adhesive for Aviation

Group Standards of the People's Republic of China

T/CSAE 134-2020 Aging resistance of automobile—Outdoor accelerated weathering test method of exposure with solar tracking concentration apparatus
T/CSRA 10.3-2021 Test method for aging resistance of aramid Ⅲ fiber Part 3: Xenon lamp test method
T/ZZB 1079-2019 Xenon-arc sources aging resistance tester for plastics and their products
T/CSTM 00355-2021 Test method for aging properties of bentonite impervious liner
T/CSAE 133-2020 Performance requirements for laboratorylight stability of passenger car parts
T/CSAE 104-2019 Laboratory xenon arc exposure test method of automotive exterior decoration coatings
T/CPSS 1006-2020 Highly accelerated life test methods of switching power supply

Professional Standard - Aerospace

QJ/Z 164.1-1986 Thermal aging test method for polymer materials Aging test guidelines
QJ 2328-1992 Test method for temperature accelerated aging of composite solid propellant
QJ 1238.12-1987 High Temperature Aging Test of Cable Test Method on Missile Launch Vehicle

Taiwan Provincial Standard of the People's Republic of China

CNS 10877-1984 Method of Test for Fiber Optic Devices (Maintenance Aging)
CNS 3556-1999 Method of test for accelerated aging of vulcanized rubber
CNS 12561-1989 Method of Test for Fiber Optic Devices (FOTP-101 Accelerated Oxygen Aging)

Professional Standard - Machinery

JB/T 7444-2018 Hot air aging test chambers
JB/T 7444-1994 Air Heat-up Ageing Tests Box

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13938-1992 Rubber,vulcanized--Test method of natural storage aging
GB/T 3903.7-2019 Footwear—Test methods for whole shoe—Ageing conditioning
GB/T 3903.7-2005 Footwear - Ageing conditioning
GB/T 13939-2014 Rubber,vulcanized-Test method of deterioration by heat and oxygen-Tube tester
GB/T 11206-1989 Rubber vulcanized--The test method of deterioration surface cracking
GB/T 13642-1992 Rubber,vulcanized--Resistance to ozone ageing--Dyamic strain test method
GB/T 33873-2017(英文版) Test method of energy efficiency for hot aging test oven
GB/T 33873-2017 Testing method of energy efficiency for hot aging test oven
GB/T 18244-2000 Test methods for resistance to weathering pf building water proofing materials
GB/T 40166-2021 Paper and board—Accelerated ageing(exposure to nitrogen dioxide)
GB/T 11206-2009 Standard test method for rubber deterioration - Surface cracking
GB/T 7762-1987 Rubber vulcanized--To zone ageing--Static strain test method
GB/T 15905-1995 Rubber, vulcanized－Test method of damp heat aging
GB/T 33873-2017(法语版) Thermal Aging Test Chamber Energy Efficiency Test Method (French)
GB/T 35858-2018 Rubber,vulcanized—Test method of salt mist aging
GB/T 35464-2017 Agglomerated stone test methods―Determination of resistance to ageing by salt mist
GB/T 15750-1995 Test program for the ageing properties of piezoelectric ceramics
GB/T 33873-2017(俄语版) Thermal Aging Test Chamber Energy Efficiency Test Method (Russian)
GB/T 12831-1991 Rubber, vulcanized-Test method of resistance to artificial weathering (xenon lamp)
GB/T 15255-2015 Rubber,vulcanized―Test method for artificial weathering―Carbon-arc lamp
GB/T 17875-1999 Practice for accelerated aging of pressure-sensitive tapes
GB/T 14831-2003 Test method of resistance t steam ageing for rubber latex products
GB/T 15255-1994 Rubber, vulcanized－Test method for artifical weathering(carbon-arc lamp)
GB/T 17782-1999 Rubber, vulcanized - Test method of aging by heat and air pressure
GB/T 37259-2018 Test method for aging automobile tyres
GB/T 7141-2008 Plastics - Methods of heat aging
GB/T 13939-1992 vulcanized - Test method of heat and oxygen - Tube tester aging method
GB/T 18244-2022 Test methods for weathering resistance of building waterproof materials
GB/T 11409-2008 Test methods rubber antiagers and vulcanizing accelerators

Anhui Provincial Standard of the People's Republic of China

DB34/T 3318-2019 Xuan paper light aging test method

Military Standard of the People's Republic of China-General Armament Department

GJB 987.3-1990 Weather balloon test method Ozone aging test
GJB 987.1-1990 Weather balloon test method hot air aging test
GJB 280-1987 Test method for weather balloon resistance to sunlight aging
GJB 17.6-1984 Test methods for aviation wires and cables Oven aging test

Professional Standard - Chemical Industry

HG/T 2724.3-1995 Test method for rubber filament - Accelerated aging test in relaxed state
HG/T 2724.6-1995 Rubber filament test method heat aging test

Professional Standard - Petrochemical Industry

SH/T 0774-2005 Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV)

National Metrological Technical Specifications of the People's Republic of China

JJF 2051-2023 Calibration Specification for Ozone Aging Test Chambers

Professional Standard - Forestry

LY/T 3298-2022 Test method for natural weathering properties of coatings used for exterior wood

Fujian Provincial Standard of the People's Republic of China

DB35/T 1567-2016 Test method for thermal aging of mesh fabrics for shoes

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1100.5-2015 Artificial stone test methods part 5 salt spray aging test

American Society for Testing and Materials (ASTM)

ASTM C481-99(2016) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99 Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2025) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D1183-96e1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D5744-07e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D1183-03 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D1183-03(2011) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D1870-91 High temperature aging test method
ASTM G11-04 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
ASTM RR-D34-1019 2013 D5744-Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM C793-91(1997)e1 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
ASTM C793-05(2017) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM D3434-00(2013) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D3434-00 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D3434-00(2006) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D1669-89(1994)e1 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
ASTM D2126-15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2126-99 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D1183-03(2019) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D6833-02e1 Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus
ASTM D2126-04 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D3826-98 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D3826-98(2002) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM RR-C24-1053 1996 C1501-Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

Ente Nazionale Italiano di Unificazione

UNI EN 29142:1995 Adhesives. Guide to the of standard laboratory ageing conditions for testing bonded joints.
UNI EN 12280-3:2003 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Environmental ageing
UNI EN 12280-1:2000 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Heat ageing
UNI ISO 188:1990 Rubber, vulcanized. Accelerated ageing or heat-resistance tests.
UNI ISO 188:2012 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
UNI EN ISO 17228:2015 Leather - Tests for colour fastness - Change in colour with accelerated ageing
UNI EN 2243-5:1993 Aerospace series. Structural adhesives. Test methods. Ageing tests.

Gosstandart of Russia

GOST 9.055-1975 Unified system of corrosion and ageing protection. Wool fabric. Laboratory test method for clothes moth damage resistance
GOST 9.052-1988 Unified system of corrosion and ageing protection. Oils and greases. Laboratory test methods for mould resistance
GOST 9.050-1975 Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance
GOST 9.701-1979 Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance
GOST 9.707-1981 Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST 9.706-1981 Unified system of corrosion and ageing protection. Polimer materials. Test methods for radiation ageing resistance
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
GOST 9.029-1974 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression
GOST 9.066-1976 Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of ageing resistance testing under weather conditions

British Standards Institution (BSI)

BS EN 29142:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS 903-A19:1956 Methods of testing vulcanized rubber. Accelerated ageing test
BS EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 2243-5:1992 Test methods for structural adhesives.-Ageing tests
BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
BS EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS 903-A19:1986 Physical testing of rubber-Heat resistance and accelerated ageing tests
BS EN ISO 9142:2003(2007) Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS 903-A19:1986(1999) Methods of testing vulcanized rubber — Part A19 : Heat resistance and accelerated ageing tests — [ ISO title : Rubber, vulcanized — Accelerated ageing or heat - resistance tests ]
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS 903-A19:1975 Methods of testing vulcanized rubber.-Heat resistance and accelerated air ageing tests
BS IEC 63211-2-23:2025 Durability test methods for electronic displays - Environmental tests. Outdoor weathering
BS ISO 17228:2005 Leather - Tests for colour fastness - Change in colour with accelerated ageing
BS EN 12280-2:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Physical ageing: effect of light or weathering
09/30192966 DC BS EN 60811-401. Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Environmental tests. Thermal ageing methods. Ageing in an air oven
BS EN ISO 17228:2015 Leather. Tests for colour fastness. Change in colour with accelerated ageing
09/30193010 DC BS EN 60811-412. Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Environmental tests. Thermal ageing methods. Ageing in an air bomb

GM Daewoo

GMKOREA EDS-T-7649-2012 Test Method for Determining the Heat Ageing Resistance of Upholstery Trim Materials ??? ???? ?? ??? ?? ?? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14124
GMKOREA EDS-T-7421-2012 Accelerated Aging Test for Elastomers ????? ???? ???? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ISO188 [Replaced: GMKOREA EDS-T-7421]
GMKOREA EDS-T-7672-2011 Test Method for Resistance of Cellular Material to Heat Ageing

PK-PSQCA

PS 348-1963 Accelerated Ageing Tests on Rubbers.

GCC Standardization Organization

GSO ASTM D8137:2024 Practice for Accelerated Aging of Leather
GSO ISO 11561:2014 Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
GSO IEC 60811-401:2013 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
GSO ISO 188:2015 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests

Association Francaise de Normalisation

NF T76-109*NF EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
NF P90-105:1992 Sports grounds. Artificial ageing test.
NF EN ISO 9142:2004 Adhesives - Guide for the selection of normal laboratory aging test conditions for bonded assemblies
XP P98-526-2000 Road traffic signs - Decors for traffic signs - Laboratory artificial ageing methods.
NF T76-109:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
NF T30-056:1974 PAINTS. CONDUCT OF NATURAL WEATHERING TESTS.
NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF P84-351:1955 Tightness. Paste products. Ageing test.
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF G37-105-1*NF EN 12280-1:1998 Rubber- or plastic- coated fabrics. Accelerated ageing tests. Part 1 : heat ageing.
NF G37-105-2*NF EN 12280-2:2003 Rubber-or plastics-coated fabrics - Accelerated ageing tests - Part 2 : physical ageing : effect of light or weathering.
NF P98-526:1991 ROAD TRAFFIC SIGNS. DECORS FOR TRAFFIC SIGNS. LABORATORY ARTIFICIAL AGEING METHODS.
NF G37-105-3*NF EN 12280-3:2003 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3 : environnement ageing.
NF EN 60811-401:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal aging methods - Air oven aging
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF X41-572:1988 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure.
NF G52-320:2006 Leather - Tests for colour fastness - Change in colour with accelerated ageing.
NF EN 60811-401/A1:2017 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal aging methods - Air oven aging
NF X41-572:2014 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
NF EN 12280-1:1998 Textile supports coated with rubber or plastic - Accelerated aging tests - Part 1: heat aging
NF B51-262:1972 Particle boards. Accelerated ageing by boiling water.(so-called test "V 100").
NF T30-049:2017 Paints and varnishes - Cladding paints - Accelarated ageing test
NF G52-320*NF EN ISO 17228:2015 Leather - Tests for colour fastness - Change in colour with accelerated ageing
NF EN 60811-412:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal aging method - Aging in an air bomb
NF Q03-037:1969 PAPER AND BOARD TESTS. ACCELERATED AGEING BY EXPOSURE TO RADIATION FROM A LIGHT SOURCE. DETERMINATION OF AGEING RESISTANCE.
NF T34-201-3*NF EN 927-3:2019 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3 : natural weathering test

Korean Agency for Technology and Standards (KATS)

KS M 6788-1999 Accelerated aging test methods for vulcanized rubber
KS M 6788-2004 Accelerated aging test methods for vulcanized rubber
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 9142-2012(2022) Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS M ISO 9142-2012(2017) Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS M ISO 9142:2012 Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS M ISO 9142-2022 Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
KS M 2073-2011 Testing method for weathering of liquefied petroleum gas
KS M ISO 11561-2019 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M 6788-2014 Accelerated aging test methods for vulcanized rubber
KS M 6788-1994 Accelerated aging test methods for vulcanized rubber
KS M 6790-2005(2010) Testing methods of resistance to ozone cracking for vulcanized rubber
KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS K 0706-2007 Test method for weathering resistance of cloth:Weather-o-meter method
KS C IEC 60811-412-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS F 2391-2014 Standard test method for accelerated aging of asphalt binder using a pressurized aging vessel
KS M ISO 17228-2023 Leather — Tests for colour fastness — Change in colour with accelerated ageing
KS M ISO 17228-2016 Leather－Tests for colour fastness－Change in colour with accelerated ageing
KS M ISO 188:2014 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
KS M ISO 188:2009 Rubber, vulcanized or thermoplastic-Accelerated ageing and heat resistance tests
KS M ISO 17228:2016 Leather－Tests for colour fastness－Change in colour with accelerated ageing
KS C IEC 60811-412-2021 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS M ISO 17228:2006 Leather-Tests for colour fastness-Change in colour with accelerated ageing
KS M ISO 1419-2023 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
KS M ISO 17228-2016(2021) Leather－Tests for colour fastness－Change in colour with accelerated ageing

International Organization for Standardization (ISO)

ISO 9142:1990 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 188:1976 Rubber, vulcanized — Accelerated ageing or heat-resistance tests
ISO 188:2023 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ISO 188:1982 Rubber, vulcanized; Accelerated ageing or heat-resistance tests
ISO 9142:1990/Cor 1:1995 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints; Technical Corrigendum 1
ISO/TS 19022:2016 Plastics - Method of controlled acceleration of laboratory weathering by increased irradiance
ISO 17228:2015 Leather - Tests for colour fastness - Change in colour with accelerated ageing
ISO 17228:2005 Leather - Tests for colour fastness - Change in colour with accelerated ageing
ISO 2440:1983 Polymeric materials, cellular flexible; Accelerated ageing tests

(U.S.) Ford Automotive Standards

FORD FLTM BO 001-2-2001 PLASTICS - TEST FOR AGING IN GASOLINE
FORD FLTM BO 001-02-2001 PLASTICS - TEST FOR AGING IN GASOLINE

German Institute for Standardization

DIN 53508:2024 Testing of rubber - Accelerated ageing
DIN 53508:2000 Testing of rubber - Accelerated ageing
DIN EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
DIN EN 73:1990 Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988
DIN 51554-1:1978 Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose, sampling, ageing
DIN 53508 E:2023 Draft Document - Testing of rubber - Accelerated ageing
DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
DIN 53384:1989 Testing plastics for artificial aging or exposure to UV radiation in laboratory equipment
DIN EN 73 E:2012-02 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
DIN EN 12280-1:1998 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 12280-1:1998-01 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens; Multi-chamber ovens (IEC 60216-4-3:2000); German version EN 60216-4-3:2000
DIN EN 12280-3:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
DIN EN 73 E:2018-10 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
DIN 53578:1974 Testing the performance of flexible foam materials by aging test
DIN EN ISO 17228:2006 Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2005); English version of DIN EN ISO 17228:2006-09
DIN EN 12280-2:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering; German version EN 12280-2:2001

European Committee for Standardization (CEN)

prEN 29142-1992 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990)
EN 12280-1:1997 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
EN ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Supersedes EN 29142: 1993; ISO 9142: 2003
EN 73:1988 Wood preservatives; accelerated ageing of treated wood prior to biological testing; evaporative ageing procedure

Spanish Association for Standardization (UNE)

AENOR UNE 48059:1982 Accelerated aging test (closed arcs).
UNE 48059:1982 ACCELERATED WEATHERING TEST (ENCLOSED ARC)
UNE 211605:2013 Climatic ageing test of outer covering cables.
UNE 53548:1996 RUBBER VULCANIZED. ACCELERATED AGEING OR HEAT RESISTANCE TESTS.
UNE-EN 12280-1:1998 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
AENOR UNE-EN 12280-1:1998 Rubber- or plastics- coated fabrics - Accelerated aging tests - Part 1: Heat aging
AENOR UNE-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated aging tests - Part 3: Environmental aging
UNE-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
UNE 211605:2022 Climatic ageing test of outer covering cables.
AENOR UNE 211605:2013 Climatic aging test of cable coating materials.
AENOR UNE-EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory aging conditions for testing bonded joints (ISO 9142:2003)
UNE 56406:1992 WOOD PRESERVATIVES. ACELERATED AGEING OF TREATED WOOD PRIOR TO BIOLOGICAL TESTING. EVAPORATIVE AGEING PROCEDURE.
UNE-EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
UNE-EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
AENOR UNE-EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated aging tests - Part 2: Physical aging: effect of light or weathering
UNE-EN 927-3:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

Swedish Institute for Standards

SS-ISO 11561:2000 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
SS 27216:1980 Wood preservatives - Accelerated ageing tests of treated wood priorto biological testing - Evaporative ageing procedure
SS-ISO 9142:1993 Adhesives - Guide to the selection of standard laboratory ageing conditions f"r testing bonded joints
SS-ISO 9142/Cor 1:1996 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints - Technical corrigendum 1
SS-EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
SS-EN 12280-1:1997 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
SS-EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
SS-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
SS-EN 29142:1993 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990)
SS-EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

Japanese Industrial Standards Committee (JISC)

JIS K 6877:2010 Adhesives-Guide to the selection of standard laboratory ageing conditions for testing bonded joints
JIS K 6257:1993 Accelerated aging test methods for vulcanized rubber
JIS Z 2607:1963 Method for determining deterioration of foundry sands

Society of Automotive Engineers (SAE)

SAE J1976-2022 Outdoor Weathering of Exterior Materials

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11561:2014 Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
OS GSO ISO 9142:2013 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 11561:2016 Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BH GSO ISO 9142:2016 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints

CZ-CSN

CSN 62 1523-1981 Vulcanized rubber. Accelerated heat oxygen ageing test
CSN 62 1522-1981 Vulcanized rubber. Accelerated heat air ageing test
CSN 62 1528-1976 Ageing tests of rubber in atmoapheric condi- tiona
CSN 62 1528-1979 Rubber. Ageing tests in atmospheric conditions
CSN 34 7010 Cast.60-1972 Accelerated ageing teat of plastics coverings

International Electrotechnical Commission (IEC)

IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 60811-401:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

BE-NBN

NBN T 31-005-1976 Vulcanized rubers- Accelerated ageing or heat restance tests

Standards Norway

NS-ISO 9142:1990 Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
NS-EN 12280-1:1997 Rubber- or plastics- coated fabrics — Accelerated ageing tests — Part 1: Heat ageing
NS-EN 12280-3:2002 Rubber- or plastic-coated fabrics — Accelerated ageing tests — Part 3: Environmental ageing
NS-EN ISO 9142:2003 Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)

Lithuanian Standards Office

LST EN 73+AC-2000 Wood preservatives - Accelerated ageing tests of treated wood prior to biological testing - Evaporative ageing procedure
LST EN 12280-1-2000 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
LST EN 12280-3-2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
LST EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)

SE-SIS

SIS SS-ISO 188:1990 Rubber, vulcanized — Accelerated ageing or heat-resistance tests
SIS SS IEC 493:1982 Guide for the statistical analysis of ageing test data
SIS 16 92 15-1975 Flexible cellular materials. Accelerated ageing test

TR-TSE

TS 1969-1975 VULCAN1ZED RUBBERS ACCELERATED AGEING OR HEAT RESISTANCE TESTS
TS 2826-1977 FLEXIBLE CELLULAR MATERIALS ACCELERATED AGEING TESTS

Danish Standards Foundation

DS/ISO 188:1989 Rubber, vulcanized. Accelerated ageing or heat-resistance tests
DANSK DS/EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
DS/EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
DS/EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
DANSK DS/EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
DANSK DS/EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
DS/EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
DS/EN ISO 17228:2006 Leather - Tests for colour fastness - Change in colour with accelerated ageing
DANSK DS/EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering

RO-ASRO

STAS 9676-1974 FLEXIBLE CELLULAR MATERIALS Test to accelerated ageing

IN-BIS

IS 12394-1988 Iron ore sinter aging test method
IS 10810 Pt.56-1987 Cable test methods Part 56 Pressure accelerated aging test
IS 3400 Pt.4-1978 Test Methods for Vulcanized Rubber Part IV Accelerated Aging

American National Standards Institute （ANSI)

ANSI/EIA 364-24B:1998 Electric Connectors – Maintenance Aging Test Procedure
ANSI/EIA 364-24B:2009 Maintenance Aging Test Procedure for Electrical Connectors

Standard Association of Australia （SAA）

AS 2313.3.1:2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Ageing properties - Accelerated ageing
AS 2313.3.1:2005(R2016) Methods of test for single sided and double sided pressure-sensitive adhesive tape - Ageing properties - Accelerated ageing
AS Z24.4.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 4.1: Stability - Accelerated ageing - Stability - Accelerated ageing
AS 1745.2:1989 Outdoor weathering of plastics in the Australian environment Part 2: Guide for design purposes
AS 1745.1:1989 Outdoor weathering of plastics in the Australian environment

PL-PKN

PN E04160-31-1991 Electric cables Test methods Accelerated ageing in air

AT-ON

ONORM EN 29142-1993 Adhesives - Guide to the selection of Standard laboratory ageingconditionsfortesting bonded joints (ISO 9142:1990)

YU-JUS

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

IT-UNI

UNI 5409-1964 Elastic materials: vulcanized material test, artificial accelerated aging test under pressure oxidation atmosphere
UNI 5408-1964 Elastomeric materials: vulcanized material tests, artificially accelerated aging tests in furnaces

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0472-303-1990*DIN VDE 0472-303:1990 Testing of cables, wires and flexible cords; Ageing procedures – IEC 811-1-2 Ed. 1.0

Bureau of Indian Standards

IS 10810-16-1986 Methods of test for cables:Part 16 Accelerated ageing test by oxygen pressure method

South African Bureau of Standard

SANS 54:2003 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

CEN - European Committee for Standardization

PREN 927-3-2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test