Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

Equipment conductivity testing

Equipment conductivity testing, Total:357 items.

The international standard classification for "Equipment conductivity testing" includes: Nuclear energy engineering , Hydraulic energy engineering , Components for electrical equipment in general , Power stations in general , Energy and heat transfer engineering in general , Electrical engineering in general , Other road vehicle systems , Electrical equipment of ships and of marine structures , Electromechanical components for electronic and telecommunications equipment , Nuclear power plants. Safety , Plug-and-socket devices. Connectors , Telecontrol. Telemetering , Navigation and control equipment , Diagnostic equipment .

The Chinese standard classification for "Equipment conductivity testing" includes: Power station engineering , Water power engineering , Basic standards and general methods , Complete equipment for high voltage device , Electric power testing technique , Power plant and electric power system operating maintenance , Basic standards and general methods , Technical management , Hygiene, safety and labor protection , Electronic/electrical equipment and instruments for vehicle in general , Reliability and maintainability , Electrical, observation/communication and navigation equipment for vessel in general , Special electronic technology material , Nuclear reactor and nuclear island equipment of nuclear power plant , Electric transmission and transformation equipment in general , Connector , Low voltage apparatus in general , Control circuit apparatus , Radar, navigation, remote control, remote measuring and antenna synthesis , Marine communication equipment , Power semiconductor device and parts , Technical management , Medical apparatus and devices in general .


Group Standards of the People's Republic of China

  • T/CNIDA 007-2023 Selecting guide for electric system on-line monitoring device of conventional island in nuclear power plants
  • T/CSEE 0154-2020 Guidance on Field Application of Radio Frequency Detection Method for Partial Discharge of Power Equipment
  • T/DJPEC 0013-2019 Intelligent sales terminal electronic equipment monitoring basic guidelines
  • T/JSEE 005-2022 Technical specification for conductive grease for electrical equipment
  • T/CEEIA 703-2023 Test guidance for nuclear electromagnetic pulse/lightning electromagnetic pulse of electrical equipments
  • T/CEC 611-2022 Technical Guidelines for Acoustic Imaging Testing of Substation Equipment
  • T/CSEE 0209-2021 Guidelines for testing low-voltage power emergency power supply equipment
  • T/ZZB Q041-2022 Mixed signal semiconductor device test equipment
  • T/ZACA 041-2022 Mixed signal semiconductor device test equipment

Professional Standard - Energy and Power Planning

  • DL/T 2231-2021 Guide for frequency domain dielectric spectrum test of Oil-paper insulation power apparatus
  • DL/T 907―2004 Guidelines for Infrared Detection of Thermal Equipment
  • DL/T 1785-2017 Directive for X-ray digital radiography of electric power equipment
  • DL/T 1430-2015 Technical Guide for On-line Monitoring System of Transformation Equipment
  • DL/T 417-2019 Guidelines for On-site Measurement of Partial Discharge of Power Equipment
  • DL/T 2145.2-2020 Field testing guide for on-line monitoring device of transformation equipment-Part 2: On-line insulation monitoring device of capacitive equipment and metal-oxide arrester
  • DL/T 5401-2007 Instrument allocation guide for electrical test of hydropower plant
  • DL/T 417-2006 Guide for partial discharge measuring of power equipment
  • DL/T 1180-2012 The Guide of Supervision for Manufacturing 1000kV Electrical Equipment
  • DL/T 1785-2017(英文版) Technical Guidelines for X-ray Digital Imaging Inspection of Power Equipment
  • DL/T 309-2010 Execution guide for field test of 1000kV AC system power equipment
  • DL/T 2640-2023 Guide for field AC demagnetization and detection of power equipment remanence
  • DL 417-1991 Guide for Partial Discharge Measuring of Power Equipment
  • DL/T 586-2008 The technical guide of supervision for manufacturing equipment of electric power
  • DL/T 907-2004 Guide for infrared inspection of thermal power equipments
  • DL/T 381-2010 Technical guide for protection against lighting of electronic device
  • DL/T 2411-2021 Field test guidance for mineral insulating oil used in electric equipment
  • DL/T 1994-2019 Guide for dielectric response test on capacitive. type oil-paper insulation equipment
  • DL/T 2524-2022 Electric emergency power equipment testing guidelines
  • DL/T 309-2023 Execution guide for field test of ac 1000kV electric equipment
  • DL/T 1331-2014 Test Guidance for AC Transformer Device without Demolishing High-voltage Leads
  • DL/T 838-2003 Guide of maintenance for power plant equipments

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 6422-2009 Testing guide for energy consumption of equipment
  • GB/T 15428-1995 Cold plate design guideline for electronic equipment
  • GB/T 34657.1-2017 Interoperability test specifications of electric vehicle conductive charging - Part 1: Supply equipment
  • GB/T 10217-1988 The design guide of the outline and structure for the electric control equipment
  • GB/T 41718-2022 Guideline for critical component condition monitoring management in nuclear power plant
  • GB/T 15872-2013 Power supply interface for semiconductor equipment
  • GB/T 15868-1995 Shipborne radio equipment forming part of the GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM and Marine navigational equipment—general requirements,methods of testing and required test results
  • GB/T 13395-2008 Regulation of hot washing for electric power apparatus
  • GB/T 25295-2010 Guidelines on safety designs for electric equipments
  • GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
  • GB/T 10217-2021 Design guide of the outline and structure for the electric control equipment
  • GB 5080.2 86 Equipment reliability testing Guidance for the design of test cycles
  • GB/T 25296-2022 Guidelines on general tests for safety of electrical equipments
  • GB/T 15872-1995 Power supply interface for semiconductor equipment
  • GB/T 18110-2000 Electromechanical equipment guide for small hydroelectric installations
  • GB/T 3483-1983 Guidance of lightning test for electronic equipments
  • GB/T 7450-1987 Guidance for lightning protection for electronic equipments
  • GB/T 34657.1-2025 Interoperability test specifications of electric vehicle conductive charging—Part 1: Supply equipment
  • GB 5080.2-1986 Equipment reliability testing - Guidance for the design of test cycles
  • GB/T 10217-2011 The design guide of the outline and structure for the electric control equipment
  • GB/T 22193-2008 Electrical installations in ships - Equipment - Semiconductor convertors
  • GB/T 12858-1991 Environment requirements and test methods for ground radio-navigation equipments
  • GB/T 4064-1983 General guide for designing of electrical equipment to satisfy safety requirements
  • GB/T 25296-2010 Guidelines on general tests for safety of electrical equipments
  • GB/T 18110-2016 Electromechanical equipment guide for small hydroelectric installations
  • GB/T 9414.7-2000 Guide on maintainability of equipment--Part 4:Diagnostic testing

Professional Standard - Electricity

  • DL/T 1331-2024 Guidelines for testing AC power transformation equipment without removing high voltage leads
  • DL/T 586-2025 Guidelines for Power Equipment Supervision and Manufacturing Technology
  • DL/T 2891-2025 Guidelines for Field Testing of Acoustic Imaging on High Voltage Electrical Equipment

Professional Standard - Machinery

  • JB/T 4219-1999 Type Designation of Measuring Equipments for Power Semiconductor Devices

Military Standard of the People's Republic of China-General Armament Department

  • GJB 8409-2015 Specification for electric missile erecting equipment
  • GJB 2696-1996 Interface of Ground-base TT&C equipment for missile and spacecraft flight mission
  • GJB 4295A-2017 Code naming method for missile and spacecraft test site measurement and control equipment
  • GJB 8010-2013 General specification for test equipments of safety self-destruction system of ground-to-ground missile
  • GJB 5014-2001 General specifications for unit test equipment for ballistic strategic missiles
  • GJB 1701-1993(XG1-2015) General Specification for Tactical Missile Test Equipment
  • GJB 1622-1993 General specification for test equipment for aeronautical electrical and electronic equipment
  • GJB 4295-2001 Code naming method for measurement and control equipment at missile and spacecraft test sites
  • GJB 6771-2009 TT&C equipments digital leading calculating method for missile and spacecraft flight mission
  • GJB 4047-2000 General specifications for ballistic missile conventional warhead assembly testing and launch test equipment
  • GJB 1701-1993 General Specification for Tactical Missile Test Equipment
  • GJB 1306-1991 General Specification for Strategic Missile Test Launch Control System Equipment
  • GJB 6860-2009 General specification for automatic test equipments of land-based cruise missile
  • GJB 1558.3-2012 Electronic Countermeasures Equipment Test Rules Part 3: Missile-borne Electronic Countermeasures Equipment
  • GJB 3972-2000 General specifications for comprehensive test equipment for air-to-air missiles
  • GJB 4045-2000 General Specifications for Integrated Test Equipment for Opposite Tactical Missiles

Professional Standard - Aerospace

  • QJ 2436-1993 Specifications for final assembly and testing of equipment onboard missiles
  • QJ 1448-1988 雷达
  • QJ 2170-1991 General specification for tactical missile trigger fuze test equipment
  • QJ 3156-2002 Stress test method for large structure of missile ground equipment

Professional Standard - Commodity Inspection

  • SN/T 3480.4-2016 Technical requirements for the inspection of complete set of equipment in electronic and electrical industry for import--Part4:Semiconductor package and final test equipment

Professional Standard - Navy

  • HJB 365-2006 Metrological Verification Requirements for Submarine Strategic Missile Ground Test Equipment
  • HJB 249.8-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 60TS General inspection platform for homing system
  • HJB 249.9-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 626TS1 Homing transmitter test bench
  • HJB 249.13-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.624TS Self-guided related inspection tables
  • HJB 369.5-2006 Submarine Strategic Missile Equipment Quality Monitoring Requirements Part 5: JL-1 Missile Test Equipment
  • HJB 249.16-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203B 625TS Self-guided instruction inspection table
  • HJB 249.7-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.626TS2 Special power supply for homing transmitters

Professional Standard - Non-ferrous Metal

  • YS/T 443-2022 Guidelines for equipping of inspection, measurement and test equipments for copper processing enterprises
  • YS/T 443-2001 Copper processing enterprise inspection, measuring and test equipment

State Grid Corporation of China

  • Q/GDW 1895-2013 Guidelines for field application of dielectric dissipation factor and capacitance live test technology for capacitive equipment
  • Q/GDW 534-2010 Technical guide for on-line monitoring system of transformation equipment

Professional Standard - Medicine

  • YY/T 0841-2011 Medical electrical equipment—Recurrent test and test after repair of medical electrical equipment
  • YY/T 0841-2023 Medical electrical equipment---Recurrent test and test after repair ofmedical electrical equipment

Professional Standard - Energy

  • DL/T 1180-2024 Guidelines for Supervision and Manufacturing of Electrical Equipment at 1000 kV
  • NB/T 10644-2021 Application guidelines of laser wind measuring equipment for wind turbines

Shanghai Provincial Standard of the People's Republic of China

  • DB31/T 178-2020 Guideline for rationality of electricity usage by lighting equipment
  • DB31/T 178-2002 Guidelines for Rational Electricity Utilization of Lighting Equipment

Professional Standard - Electron

  • SJ/Z 9036-1987 Electrical and electronic measuring and testing equipment

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

  • GJB 1306A-2005 General specification for equipments of test and firing control system of strategic missiles

Society of Automotive Engineers (SAE)

Aeronautical Radio Inc.

International Civil Aviation Organization

  • ICAO 8071-2-2007 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems
  • ICAO 8071-1-2000 Manual on Testing of Radio Navigation Aids - Volume I: Testing of Ground-based Radio Navigation Systems
  • ICAO 8071-2 CORR-2008 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems; Corrigendum
  • ICAO 8071 VOLUME III-2020 Manual on Testing of Radio Navigation Aids Volume III — Testing of Surveillance Radar Systems
  • ICAO 8071-3-1998 Manual on Testing of Radio Navigation Aids - Volume III: Testing of Surveillance Radar Systems

United States Navy

  • NAVY MIL-STD-287 A VALID NOTICE 1-1991 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
  • NAVY MIL-STD-287 A-1958 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
  • NAVY MIL-STD-287 A NOTICE 2-1997 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
  • NAVY MIL-T-19851 C-1971 TACTICAL AIR NAVIGATION (TACAN) EQUIPMENT, SHORT RANGE, TEST EQUIPMENT FOR
  • NAVY MIL-T-19851 C (1)-1971 TACTICAL AIR NAVIGATION (TACAN) EQUIPMENT, SHORT RANGE, TEST EQUIPMENT FOR
  • NAVY MIL-HDBK-704-3-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS THREE PHASE, 400 HZ, 115 VOLT ( PART 3 OF 8 PARTS )
  • NAVY MIL-HDBK-704-7-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS 270 VDC (PART 7 OF 8 PARTS)
  • NAVY MIL-HDBK-704-1-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS ( PART 1 OF 8 PARTS )
  • NAVY MIL-HDBK-704-5-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS THREE PHASE, VARIABLE FREQUENCY, 115 VOLT ( PART 5 OF 8 PARTS )
  • NAVY MIL-HDBK-704-2-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, 400 HZ, 115 VOLT ( PART 2 OF 8 PARTS )
  • NAVY MIL-HDBK-704-6-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, 60 HZ, 115 VOLT (PART 6 OF 8 PARTS)
  • NAVY MIL-HDBK-704-4-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, VARIABLE FREQUENCY, 115 VOLT ( PART 4 OF 8 PARTS )
  • NAVY MIL-T-21200 L VALID NOTICE 2-1993 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
  • NAVY MIL-T-21200 L-1973 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
  • NAVY MIL-HDBK-704-8-2004 GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS 28 VDC (PART 8 OF 8 PARTS)
  • NAVY MIL-T-21200 L (1)-1999 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
  • NAVY MIL-T-21200 L NOTICE 1-1977 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
  • NAVY MIL-L-82565-1968 LIGHT CIRCUIT ASSEMBLY LD 546991 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD 0 AND MOD 1)
  • NAVY MIL-L-82565 (2)-1972 LIGHT CIRCUIT ASSEMBLY LD 546991 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD 0 AND MOD 1)
  • NAVY MIL-T-85288 NOTICE 2-1997 TACTICAL NAVIGATION SET AN/ASN-123, GROUND SUPPORT EQUIPMENT ELECTRONIC SYSTEMS TEST SET, AN/ASM-614
  • NAVY MIL-E-85288-1979 TACTICAL NAVIGATION SET AN/ASN-123, GROUND SUPPORT EQUIPMENT ELECTRONIC SYSTEMS TEST SET, AN/ASM-614
  • NAVY MIL-T-85288 VALID NOTICE 1-1991 TACTICAL NAVIGATION SET AN/ASN-123, GROUND SUPPORT EQUIPMENT ELECTRONIC SYSTEMS TEST SET, AN/ASM-614

GCC Standardization Organization

  • GSO IEC 60333:2009 Nuclear instrumentation - Semiconductor charged-particle detectors - Test procedures
  • GSO IEC 61108-2:2014 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • OS GSO IEC 60512-99-003:2024 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair connectors separating (unmating) under electrical load
  • GSO IEC 61023:2014 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • GSO IEC 61108-3:2021 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • GSO 723:1997 Methods of test for telephone sets.
  • GSO IEC 62052-11:2007 Electricity Metering Equipment (AC) - General Requirements Tests and Test Conditions Part II: Metering Equipment

National Standardisation Body (ASRO)

  • STAS 6693/2-1975 Semiconductor devices TRANSISTORS Methods for measuring electrical properties
  • STAS 11053/14-1985 Testing devices for electrical purposes IMPACT TEST APPARATUS
  • STAS 12480/1-1986 ANTISTATIC AND CONDUCTIVE VULCANISED RUBBER PRODUCTSFOR MEDICAL EQUIPMENT Determination of electrical resistance
  • STAS 11053/8-1978 Testing devices for electrical purposesBALL PRESSURE APPARATUS
  • STAS 11053/5-1978 Testing devices for electrical purposesSPLASH APPARATUS

British Standards Institution (BSI)

  • BS EN IEC 60749-28:2022 Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) sensitivity testing. Charged device model (CDM). device level
  • BS EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Thin film standard test piece for tensile testing
  • PD IEC TR 61278:2002 Live working - Guidelines for dielectric testing of tools and equipment
  • BS EN 60645-5:2005 Electroacoustics - Audiometric equipment - Instruments for the measurement of aural acoustic impedance/admittance
  • 20/30419235 DC BS EN 60749-28. Semiconductor devices. Mechanical and climatic test methods. Part 28. Electrostatic discharge (ESD) sensitivity testing. Charged device model (CDM). Device level
  • BS IEC/IEEE 62582-4:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Oxidation induction techniques
  • BS EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS) - BeiDou navigation satellite system (BDS). Receiver equipment. Performance requirements, methods of testing and required test results
  • BS EN 61788-22-1:2017 Superconductivity. Superconducting electronic devices. Generic specification for sensors and detectors
  • BS IEC 62047-40:2021 Semiconductor devices. Micro-electromechanical devices. Test methods of micro-electromechanical inertial shock switch threshold
  • BS ISO 2678:1985 Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment
  • BS EN IEC 62052-11:2021+A12:2024 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
  • BS EN 60945:1996 Marine navigation equipment. General requirements. Methods of testing and required test results
  • BS EN IEC 62052-11:2021+A11:2022 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
  • BS EN 60695-11-5:2017 Fire hazard testing. Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
  • BS EN 61108-3:2010 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • BS IEC 61108-7:2024 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS)-Satellite based augmentation system (SBAS) L1. Receiver equipment. Performance standards, methods of testing and required test results
  • BS EN 61023:2007 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • BS EN 62320-2:2017 Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS AtoN Stations. Operational and performance requirements, methods of testing and required test results

Finnish Standards Institute

  • SFS 5134-1985 Fire hazard testing of electrical equipment. Macroscopic guidance for specification preparation

Automotive Electronics Council (AEC)

  • AEC Q101-005A Discrete Semiconductor Charged Device Model (CDM) Electrostatic Discharge (ESD) Test Method

Türk Standardları Enstitüsü

  • TS 388-1977 Determination of Thermal Coadnctivity By a Plate Testing Apparatus

U.S. Military Regulations and Norms

Association of German Mechanical Engineers

German Institute for Standardization

  • DIN VDE 0404-3:2005-04 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
  • DIN VDE 0404-4:2005-04 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protective conductor currents and touch currents of electrical devices
  • DIN EN 62288:2015-05 Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results (IEC 62288:2014)
  • DIN EN 60645-5:2005 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance (IEC 60645-5:2004); German version EN 60645-5:2005
  • DIN VDE 0404-2:2002-05 Testing and measuring equipment for checking the electrical safety of electrical devices - Part 2: Testing equipment for tests after repair, change or in case of repeat tests
  • DIN EN IEC 61108-5:2021-01 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test resul...
  • DIN EN 14744:2006 Inland navigation vessels and sea-going vessels - Navigation light;English version of DIN EN 14744:2006
  • DIN EN 61108-4:2005-06 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required tes...
  • DIN IEC 61108-3 E:2008 Draft Document - Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo - Receiver equipment - Performance requirements, methods of testing and required test results (IEC 80/508/C...
  • DIN IEC 61108-3 E:2008-03 Draft Document - Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo - Receiver equipment - Performance requirements, methods of testing and required test results (IEC 80/508/C...
  • DIN EN 60945:2003 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002); German version EN 60945:2002
  • DIN EN 60945 Berichtigung 1:2010-01 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002); German version EN 60945:2002); Corrigendum to DIN EN 60945:2003-07

Association for Electrical, Electronic & Information Technologies (VDE)

  • VDE 0404-4-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protectives conductor currents and touch currents of electrical devices
  • VDE 0404-3-2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
  • VDE 0702-2019 Recurrent Test of Electrical Equipment; German and English version prEN 50699:2019
  • VDE 0404-2-2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair@ change or in case of repeat tests
  • VDE 0877-16-2-1-2006*DIN EN 55016-2-1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
  • VDE 0482-332-3-10 E*DIN EN 60332-3-10:2009-04 Tests on electric and optical fibre cables under fire conditions – Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables – Apparatus
  • VDE VDE 0701-0702 Pruefung nach Instandsetzung, Aenderung elektrischer Geraete - Wiederholungspruefung elektrischer Geraete - Allgemeine Anforderungen fuer die elektrische Sicherheit

Alliance of Telecommunications Industry Solutions (ATIS)

Austrian Standards

Military Standards (MIL-STD)

  • MIL MIL-STD-287A-1958 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN) (SUPERSEDING MIL-STD-287)
  • MIL MIL-PRF-32516-2015 Electronic Test Equipment, Intermittent Fault Detection and Isolation for Chassis and Backplane Conductive Paths
  • DOD A-A-51542-1986 TEST SET, ELECTRONIC CIRCUIT-COMPONENT

Swedish Institute for Standards

  • SIS SS-IEC 749:1991 Semiconductor devices - Mechanical and climatic test methods
  • SS-EN 60645-5:2005 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
  • SIS SS 406 01 73-1987 Testing equipment for electrical energy meters
  • SIS SS 406 03 56-1984 Electrical apparatus - Marking for conductors
  • SS-EN 61023:2007 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results
  • SIS SS-IEC 945:1991 Manne navigational equipment - General requirements - Methods of testing and required test results
  • SIS SS IEC 398:1989 Industrial electro-heating equipment — General test conditions for electro-heating appliances
  • SS-EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
  • SIS SS-IEC 748:1991 Semiconductor devices — Integrated circuits
  • SS-EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test resul...
  • SS-EN 61108-2:1998 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • SS-EN 50699:2021 Recurrent Test of Electrical Equipment
  • SS-EN 61788-14:2011 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • SS-EN 61108-4:2005 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required tes...
  • SS-EN 60945:2003 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
  • SS-EN 61924:2006 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results

Czech Standards Institute (UNMZ)

  • CSN IEC 749:1994 Semiconductor devices.Mechanical and climatic test methods
  • CSN IEC 736:1992 Testing equipment for electrical energy meters
  • CSN 35 4055 Cast.54-1988 Electromechanical components for electronic equipment; coding device test
  • CSN 35 8737-1975 Semiconductor devices. Diodes. Measurement of differential rosistanoe
  • CSN 35 8742-1973 Semiconductor devices. Transistors. Measurement of cut-oíf currents
  • CSN 37 1340-1985 Connecting and ending elements for power cables and conductors. Technical requirements and testing methods
  • CSN 35 8761-1973 Semiconductor devices. Phototransistors photodíodes. Measurement of photoelectric current
  • CSN 35 8762-1973 Semiconductor devices. Phototransistors photodiodes. Measurement of dark current
  • CSN OEG 38 1020-1966 Acceptance tests of power station equipments
  • CSN 35 8733-1975 Semiconductor devices. Diodes. Measurement of reverse voltago (working voltago)
  • CSN 35 8731-1975 Semiconductor devices. Diodes Measurement of d. c. forward voltage
  • CSN 35 8763-1973 Semiconductor devices. Diodes. Measurement o? reverse breakdown voltage

Magyar Szabványügyi Testület

Korean Agency for Technology and Standards (KATS)

  • KS C 0243-2016 Environmental testing Part 2: Tests - Test Ec: Drop and topple, primarily for equipment - type specimens
  • KS C IEC 60645-5:2014 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
  • KS C IEC 60645-5:2007 Electroacoustics-Audiometric equipment-Part 5:Instruments for the measurement of aural acoustic impedance/admittance
  • KS X IEC 60872-1-2013 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids(ARPA) - Methods of testing and required test results
  • KS X IEC 61023-2020 Maritime navigation and radiocommunication equipment and systems-Marine speed and distance measuring equipment(SDME)-Performance requirements-Methods of testing and required test results
  • KS J 0013-2006(2016) Biotechnology - equipment Guidance on testing procedures for leaktightness
  • KS X IEC 60872-2-2013 Maritime navigation and radiocommunication equipment and systems-Radar plotting aids-Part 2:Automatic tracking aids(ATA)-Methods of testing and required test results
  • KS X IEC 61108-3:2013 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • KS X IEC 61108-3-2023 Maritime navigation and radiocommunication equipment and systems-Global navigation satellite systems (GNSS)-Part 3:Galileo receiver equipment-Performance requirements, methods of testing and required test results
  • KS X IEC 60945-2020 Maritime navigation and radiocommunication equipment and systems-General requirements-Methods of testing and required test results
  • KS X IEC 60945:2005 Maritime navigation and radiocommunication equipment and systems-General requirements-Methods of testing and required test results
  • KS C IEC 61116-2006(2016) Electromechanical equipment guide for small hydroelectric installations

Association Francaise de Normalisation

  • NF C31-888-14*NF EN 61788-14:2014 Superconductivity - Part 14 : supercondcuting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • NF EN 60332-1-1:2005 Tests of electrical and fiber optic cables subjected to fire - Part 1-1: vertical flame propagation test on insulated conductor or cable - Test equipment
  • NF S31-001-5*NF EN 60645-5:2005 Electroacoustics - Audiometric equipment - Part 5 : instruments for the measurement of aural acoustic impedance/admittance
  • NF EN 60332-1-1/A1:2015 Tests of electrical and fiber optic cables subjected to fire - Part 1-1: vertical flame propagation test on insulated conductor or cable - Test equipment
  • NF EN 62353:2015 Electromedical devices - Recurrent testing and testing after repair of an electromedical device
  • NF C46-812-5*NF EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5 : beiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results
  • NF J76-103*NF EN 14744:2005 Inland navigation vessels and sea-going vessels - Navigation light
  • NF C46-803*NF EN 61023:2017 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • NF C46-801-3:2002 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3 : electronic plotting aids (EPA) - Performance requirements - Methods of testing and required test results.
  • NF EN 50699:2020 Recurring tests of electrical devices
  • NF C96-005-5*NF EN IEC 60747-5-5:2020 Semiconductor devices - Part 5-5 : optoelectronic devices - Photocouplers
  • NF EN 61116:2003 Guide to electromechanical equipment for small hydroelectric installations
  • NF C46-812-3*NF EN 61108-3:2017 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3 : galileo receiver equipment - Performance requirements, methods of testing and required test results

Institute of Electrical and Electronics Engineers (IEEE)

Electronic Components, Assemblies and Materials Association

  • ECA CB 5-1969 Recommended Test Procedure for Semiconductor Thermal Dissipating Devices

The Directorate General of Specifications and Metrology (DGSM)

  • OS GSO IEC 60736:2007 Testing Equipment for Electrical Energy Meters
  • OS GSO IEC 61108-2:2014 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • OS GSO IEC 61023:2014 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • OS GSO IEC 60945:2014 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

International Electrotechnical Commission (IEC)

  • IEC TR 60736:1982 Testing equipment for electrical energy meters
  • IEC 60645-5:2004 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
  • IEC 61116:2025 Electromechanical equipment guidance for small hydroelectric installations
  • IEC 61108-2:1998 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • IEC 61023:1999 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results
  • IEC 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
  • IEC 62288:2021+AMD1:2024 CSV Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results

Spanish Association for Standardization (UNE)

  • UNE 21378:1986 TESTING EQUIPMENT FOR ELECTRICAL ENERGY METERS.
  • UNE-EN 60068-3-3:1994 ENVIRONMENTAL TESTING. PART 3: GUIDANCE. SEISMIC TEST METHODS FOR EQUIPMENTS.
  • UNE-EN 60872-3:2001 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results.
  • UNE-EN 50699:2020 Recurrent Tests of Electrical Equipment (Endorsed by Asociación Española de Normalización in January of 2021.)
  • UNE-EN 60945:2003 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
  • AENOR UNE-EN 62052-11:2004 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
  • AENOR UNE-EN 62052-11/A1:2018 Electrical energy (AC) measurement equipment. General requirements, tests and test conditions. Part 11: Measurement equipment
  • UNE-EN 60872-1:2000 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS. RADAR PLOTTING AIDS. PART 1: AUTOMATIC RADAR PLOTTING AIDS (ARPA). METHODS OF TESTING AND REQUIRED TEST RESULTS

European Telecommunications Standards Institute (ETSI)

  • ETSI TR 138 905 V18.6.0 (2025-04)-2025 5G; NR; Derivation of test points for radio transmission and reception User Equipment (UE) conformance test cases (3GPP TR 38.905 version 18.6.0 Release 18)
  • ETSI TR 138 905 V18.5.0 (2025-02)-2025 5G; NR; Derivation of test points for radio transmission and reception User Equipment (UE) conformance test cases (3GPP TR 38.905 version 18.5.0 Release 18)
  • ETSI ETS 300 019- 2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction

American National Standards Institute (ANSI)

Gosstandart of Russia

  • GOST R IEC 62353-2013 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
  • GOST R 54117-2010 The Global Navigation Satellite Systems. Maritime differential subsystems. Navigation receiver equipment. Performance standards, methods of testing and required test results
  • GOST R IEC 60945-2007 Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
  • GOST 33473-2023 Global navigation satellite system. Satellite navigation equipment for mounting on wheeled vehicles. Functional test methods
  • GOST 27209.0-1989 Electrical thermal equipment. General test methods
  • GOST R 51837-2001 Electrical thermal equipment. General test methods

Fondo para la Normalización y Certificación de la Calidad Venezuela, République bolivarienne du

  • COVENIN 811-1974 Air and mechanical strength testing of electronic devices and electronic components (Part 2: Testing, Guide to T-test: Soldering)
  • COVENIN 721-1974 Air and Mechanical Strength Testing of Electronic Devices and Electronic Components (Part 2: Temperature Change Testing Guide)

Standards New Zealand

Comitato Elettrotecnico Italiano

  • CEI EN 50699:2021 Recurrent Test of Electrical Equipment
  • CEI EN 61108-2:1999 Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 2: Global navigation satellite system (GLONASS) - Receiver equipment Performance standards, methods of testing and required test results
  • CEI EN 61023:2009 Maritime navigation and radiocommunication equipment and systems Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results
  • CEI EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results
  • CEI EN 61108-3:2014 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • CEI EN 61108-4:2005 Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test
  • CEI EN 60945:2003 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

European Committee for Electrotechnical Standardization(CENELEC)

  • EN 61023:2007 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results
  • EN 60872-3:2001 Maritime Navigation and Radiocommunication Equipment and Systems - Radar Plotting Aids Part 3: Electronic Plotting Aid (EPA) - Performance Requirements - Methods of Testing and Required Test Results
  • EN 61108-2:1998 Maritime Navigation and Radiocommunication Equipment and Systems Global Navigation Satellite Systems (GNSS) Part 2: Global Navigation Satellite System (GLONASS) Receiver Equipment Performance Standards, Methods of Testing and Required Test Results
  • EN 62047-19:2013 Semiconductor devices - Micro-electromechanical devices - Part 19: Electronic compasses
  • EN 61023:1999 Maritime Navigation and Radiocommunication Equipment and Systems Marine Speed and Distance Measuring Equipment (SDME) - Performance Requirements - Methods of Testing and Required Test Results
  • PREN 50699-2019 Recurrent Test of Electrical Equipment
  • EN 50699:2020 Recurrent Test of Electrical Equipment
  • EN 61108-3:2010 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results

OVE Austrian Electrotechnical Association

  • OVE EN IEC 61108-5:2021 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results

Japanese Industrial Standards Committee (JISC)

  • JIS H 7314:2013 Superconductivity -- Superconducting power devices -- General requirements for characteristic tests of current leads designed for powering superconducting devices
  • JIS F 0812:2006 Maritime navigation and radiocommunication equipment and systems -- General requirements -- Methods of testing and required test results
  • JIS C 5261:1993 Test methods of potentiometers for use in electronic equipment

Kingdom of Bahrain Testing and Metrology Directorate

  • BH GSO IEC 61108-2:2016 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • BH GSO IEC 61023:2016 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • BH GSO IEC 61108-3:2022 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • BH GSO IEC TR 60736:2024 Testing Equipment for Electrical Energy Meters
  • BH GSO IEC 60945:2016 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

Danish Standards Foundation

  • DANSK DS/EN 61108-2:1998 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • DS/EN 62047-19:2013 Semiconductor devices - Micro-electromechanical devices - Part 19: Electronic compasses
  • DANSK DS/EN 61023:2007 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • DS/EN 61023:2008 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
  • DANSK DS/EN 61108-3:2010 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • DANSK DS/EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems – Global navigation satellite systems (GNSS) – Part 5: BeiDou navigation satellite system (BDS) – Receiver equipment – Performance requirements, methods of testing and required test resul...
  • DS/EN 61108-2:1999 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results
  • DANSK DS/EN 50699:2020 Recurrent Tests of Electrical Equipment
  • DS/EN 50699:2020 Recurrent Tests of Electrical Equipment
  • DS/EN 61108-4:2005 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test
  • DANSK DS/EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
  • DS/EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
  • DS/EN 61108-3:2010 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results
  • DS/EN 61924:2006 Maritime navigation and radiocommunication equipment and systems – Integrated navigation systems – Operational and performance requirements, methods of testing and required test results

Lithuanian Standards Office

  • LST EN 61108-2-2002 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Part 2: Global navigation satellite system (GLONASS). Receiver equipment. Performance standards, methods of testing and required test results (IE
  • LST EN 50699-2021 Recurrent Tests of Electrical Equipment
  • LST EN 62353-2015 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2014)
  • LST EN 62353-2008 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment (IEC 62353:2007)

Polski Komitet Normalizacyjny (PKN)

  • PN-EN IEC 61108-5-2020-12 E Maritime navigation and radiocommunication equipment and systems -- Global navigation satellite systems (GNSS) -- Part 5: BeiDou navigation satellite system (BDS) -- Receiver equipment -- Performance requirements, methods of testing and required test resu
  • PN-EN 50699-2021-07 E Recurrent Test of Electrical Equipment
  • PN E93600-1969 Metallic sealing glands tor conduclors in electrical inslalla?ions in ?hips General specificalion
  • PN T04850-1974 Information Processing Safety Standards in Industrial Control Systems

Tunisia Institut National de la Normalisation et de la Propriété Industrielle

  • NT AB 023-1970 Draden en kabels voor uitrustingen met massieve of verdeelde geleiders, met pvc geisoleerd, onder scherm, met een geleider of een tweedraads- groen.

Yugoslav Association for Standardization

  • JUS N.R4.482-1987 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC DEVICES Test methods PROCEDURE 2h: GROUNDING RESISTANCE OF THE COMMAND PART OF THE SWITCH

Bureau of Indian Standards

  • IS 10452-2-1983 Methods of tests for covered conductors for electrical equipment: Part 2 Fibrous covered conductors
  • IS 10452-1-1983 Methods of tests for covered conductors for electrical equipment: Part 1 Paper covered and cotton covered conductors
  • IS 10452 Pt.2-1983 Test methods for covered conductors for electrical equipment Part 2 Fiber covered conductors

Underwriters Laboratories (UL)

  • UL 1498-2023 Guidance Document for Gas Detection Equipment

Standard Association of Australia (SAA)

  • AS 1054:1973 Electromagnetic interference limits and measurements for semiconductor control devices

Australian/New Zealand Standard (AU-AS/NZS)

  • AS/NZS CISPR 16.1.2:2004 2nd Edition Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

Ente Nazionale Italiano di Unificazione

  • UNI EN 12298:2001 Biotechnology - Equipment - Guidance on testing procedures for leaktightness.