Power aging test

Power aging test, Total:231 items.

The international standard classification for "Power aging test" includes: Plastics , Rubber , Footwear , Electrical engineering in general , Waterproofing , Films and sheets , Adhesives , Motors , Rubber compounding ingredients , Energy and heat transfer engineering in general , Mineral materials and products , Road vehicle tyres , Materials for aerospace construction .

The Chinese standard classification for "Power aging test" includes: Basic laboratory equipment , Basic standards and general methods for synthetic resin and plastic , Rubber products in general , Footgear , Reliability and maintainability , Roof and pavement waterproof and barrier material , Latex products , Basic standards and general methods for adhesives , Electric rotating machinery in general , Electrical insulating material and its products , Basic standards and general methods for chemical additive , Technical management , Masonry product , Tyre , Petroleum asphalt , Diesel locomotives , Composite materials and solid fuels , Technical Management .

Group Standards of the People's Republic of China

T/SDWY 001-2022 Technical specification for aging of audio power amplifier products
T/CPSS 1006-2020 Highly accelerated life test methods of switching power supply
T/QGCML 3927-2024 Flame retardant and anti-aging cable
T/CSAE 134-2020 Aging resistance of automobile—Outdoor accelerated weathering test method of exposure with solar tracking concentration apparatus
T/GDSCEE 108-2022 Aging technical regulations for audio power amplifiers
T/CSRA 10.3-2021 Test method for aging resistance of aramid Ⅲ fiber Part 3: Xenon lamp test method

Professional Standard - Aerospace

QJ/Z 164.1-1986 Thermal aging test method for polymer materials Aging test guidelines
QJ 1238.12-1987 High Temperature Aging Test of Cable Test Method on Missile Launch Vehicle

Taiwan Provincial Standard of the People's Republic of China

CNS 10877-1984 Method of Test for Fiber Optic Devices (Maintenance Aging)
CNS 3556-1999 Method of test for accelerated aging of vulcanized rubber
CNS 12561-1989 Method of Test for Fiber Optic Devices (FOTP-101 Accelerated Oxygen Aging)
CNS 7663-1987 Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP - 24 Maintenance Aging Test)

Professional Standard - Machinery

JB/T 7444-2018 Hot air aging test chambers
JB/T 9544-1999 Testing methods of small power sychronous motors
JB/T 7444-1994 Air Heat-up Ageing Tests Box

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12831-1991 Rubber, vulcanized-Test method of resistance to artificial weathering (xenon lamp)
GB/T 33873-2017(英文版) Test method of energy efficiency for hot aging test oven
GB/T 3903.7-2005 Footwear - Ageing conditioning
GB/T 18244-2000 Test methods for resistance to weathering pf building water proofing materials
GB 5080.5-1985 Equipment reliability testing - Compliance test plans for success ratio
GB/T 17782-1999 Rubber, vulcanized - Test method of aging by heat and air pressure
GB/T 7762-1987 Rubber vulcanized--To zone ageing--Static strain test method
GB/T 13642-1992 Rubber,vulcanized--Resistance to ozone ageing--Dyamic strain test method
GB/T 13939-1992 vulcanized - Test method of heat and oxygen - Tube tester aging method
GB/T 11409-2008 Test methods rubber antiagers and vulcanizing accelerators
GB/T 33873-2017(法语版) Thermal Aging Test Chamber Energy Efficiency Test Method (French)
GB/T 13939-2014 Rubber,vulcanized-Test method of deterioration by heat and oxygen-Tube tester
GB/T 11206-1989 Rubber vulcanized--The test method of deterioration surface cracking
GB/T 15255-1994 Rubber, vulcanized－Test method for artifical weathering(carbon-arc lamp)
GB/T 11206-2009 Standard test method for rubber deterioration - Surface cracking
GB/T 17875-1999 Practice for accelerated aging of pressure-sensitive tapes
GB/T 33873-2017(俄语版) Thermal Aging Test Chamber Energy Efficiency Test Method (Russian)
GB/Z 28820.2-2012 Long-term radiation ageing in polymers - Part 2: Procedures for predicting ageing at low dose rates
GB/T 18244-2022 Test methods for weathering resistance of building waterproof materials
GB/T 22672-2008 Test procedures for small power synchronous motors
GB/T 15905-1995 Rubber, vulcanized－Test method of damp heat aging
GB/T 5080.5-1985 Equipment reliability testing--Compliance test plans for success ratio
GB/T 18451.2-2003 Wind turbine generator systems - Wind turbine power performance testing
GB/T 7141-2008 Plastics - Methods of heat aging
GB/T 14831-2003 Test method of resistance t steam ageing for rubber latex products
GB/T 13938-1992 Rubber,vulcanized--Test method of natural storage aging

Anhui Provincial Standard of the People's Republic of China

DB34/T 3318-2019 Xuan paper light aging test method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35464-2017 Agglomerated stone test methods―Determination of resistance to ageing by salt mist
GB/T 35858-2018 Rubber,vulcanized—Test method of salt mist aging
GB/T 33873-2017 Testing method of energy efficiency for hot aging test oven

Military Standard of the People's Republic of China-General Armament Department

GJB 9257-2017 High power microwave effect test method Narrowband high power microwave irradiation method
GJB 17.6-1984 Test methods for aviation wires and cables Oven aging test
GJB 987.1-1990 Weather balloon test method hot air aging test
GJB 9896-2020 High-power microwave effect test method Ultra-broadband high-power microwave irradiation method
GJB 280-1987 Test method for weather balloon resistance to sunlight aging
GJB 987.3-1990 Weather balloon test method Ozone aging test

Professional Standard - Chemical Industry

HG/T 2724.6-1995 Rubber filament test method heat aging test

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37259-2018 Test method for aging automobile tyres
GB/T 3903.7-2019 Footwear—Test methods for whole shoe—Ageing conditioning

National Metrological Technical Specifications of the People's Republic of China

JJF 2051-2023 Calibration Specification for Ozone Aging Test Chambers

Professional Standard - Petrochemical Industry

SH/T 0774-2005 Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV)

Professional Standard - Railway

TB/T 2526-1995 Test Method for Power Transfer of Diesel Locomotive
TB/T 2527-1995 Test Method for Diesel Locomotive Power Changing Along with Atmosphere Condition

Fujian Provincial Standard of the People's Republic of China

DB35/T 1567-2016 Test method for thermal aging of mesh fabrics for shoes

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1100.5-2015 Artificial stone test methods part 5 salt spray aging test

Professional Standard - Aviation

HB 5320-1993 Test Method for Heat Aging of Anaerobic Adhesive for Aviation
HB 5319-1993 Test Method for Thermal Ageing of Anaerobic Adhesive for Aviation

Professional Standard - Electron

SJ 26-1979 Method of life test for low power electronic tubes

American Society of Mechanical Engineers (ASME)

ASME B107.25M-1996 Pliers - Performance test methods

Korean Agency for Technology and Standards (KATS)

KS M 6788-1999 Accelerated aging test methods for vulcanized rubber
KS M 6788-2004 Accelerated aging test methods for vulcanized rubber
KS C IEC 60931-2:2003 Shunt power capacitors of the non-self-healing type for a.c.systems having a rated voltage up to and including 1 000 V－Part 2：Ageing test and destruction test
KS M 2073-2011 Testing method for weathering of liquefied petroleum gas
KS M 6788-2014 Accelerated aging test methods for vulcanized rubber
KS M 6788-1994 Accelerated aging test methods for vulcanized rubber
KS M 6790-2005(2010) Testing methods of resistance to ozone cracking for vulcanized rubber
KS C 6928-1995 Test methods of optical power meters for optical fiber
KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS K 0706-2007 Test method for weathering resistance of cloth:Weather-o-meter method
KS C IEC 60811-412-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC TS 60110-2:2017 Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
KS F 2391-2014 Standard test method for accelerated aging of asphalt binder using a pressurized aging vessel
KS M ISO 188:2014 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
KS C IEC 60811-412-2021 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS M ISO 17228:2016 Leather－Tests for colour fastness－Change in colour with accelerated ageing

(U.S.) Ford Automotive Standards

FORD FLTM BO 001-2-2001 PLASTICS - TEST FOR AGING IN GASOLINE
FORD FLTM BO 001-02-2001 PLASTICS - TEST FOR AGING IN GASOLINE

PK-PSQCA

PS 348-1963 Accelerated Ageing Tests on Rubbers.

SCC

BS 903-A19:1956 Methods of testing vulcanized rubber. Accelerated ageing test
AENOR UNE 48059:1982 Accelerated aging test (closed arcs).
BS EN 2243-5:1992 Test methods for structural adhesives.-Ageing tests
DIN 53508 E:2023 Draft Document - Testing of rubber - Accelerated ageing
BS 903-A19:1986 Physical testing of rubber-Heat resistance and accelerated ageing tests
AENOR UNE-EN 12280-1:1998 Rubber- or plastics- coated fabrics - Accelerated aging tests - Part 1: Heat aging
DANSK DS/EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
NS-EN 12280-1:1997 Rubber- or plastics- coated fabrics — Accelerated ageing tests — Part 1: Heat ageing
NS-EN 12280-3:2002 Rubber- or plastic-coated fabrics — Accelerated ageing tests — Part 3: Environmental ageing
BS 903-A19:1975 Methods of testing vulcanized rubber.-Heat resistance and accelerated air ageing tests
DANSK DS/EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
AENOR UNE-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated aging tests - Part 3: Environmental aging
BS 3712-4:1985 Building and construction sealants-Methods of test for adhesion in peel, tensile extension and recovery and loss of mass after heat ageing
AENOR UNE 211605:2013 Climatic aging test of cable coating materials.
AWWA DSS71322 Ageing Pump Efficiency: The Hidden Cost Thief?
CEI EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 3: Frequency aging test methods

DIN

DIN 53508:2024 Testing of rubber - Accelerated ageing

German Institute for Standardization

DIN 53508:2000 Testing of rubber - Accelerated ageing
DIN EN 60931-2:1997 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test (IEC 60931-2:1995); German version EN 60931-2:1996
DIN EN 73:1990 Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988
DIN 51554-1:1978 Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose, sampling, ageing
DIN IEC 61123:1993 Reliability testing; compliance test plans for success ratio; identical with IEC 61123:1991
DIN EN 12280-1:1998-01 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 73 E:2012-02 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
DIN EN 12280-1:1998 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 12280-3:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
DIN EN 73 E:2018-10 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
DIN EN ISO 17228:2006 Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2005); English version of DIN EN ISO 17228:2006-09

Association Francaise de Normalisation

NF P90-105:1992 Sports grounds. Artificial ageing test.
NF P18-653-4:1998 Tests for thermal and weathering properties of aggregates. Part 4 : determination of drying shrinkage.
NF P18-653-4*NF EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4 : determination of drying shrinkage
NF C54-119*NF EN 60931-2:1996 Shunt power capacitors of the non-self healing type for A.C. Systems having a rated voltage up to and including 1 kv. Part 2 : ageing test and destruction test.
NF T30-056:1974 PAINTS. CONDUCT OF NATURAL WEATHERING TESTS.
NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF P84-351:1955 Tightness. Paste products. Ageing test.
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF G37-105-1*NF EN 12280-1:1998 Rubber- or plastic- coated fabrics. Accelerated ageing tests. Part 1 : heat ageing.
NF G37-105-2*NF EN 12280-2:2003 Rubber-or plastics-coated fabrics - Accelerated ageing tests - Part 2 : physical ageing : effect of light or weathering.
NF G37-105-3*NF EN 12280-3:2003 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3 : environnement ageing.
NF R11-503/A1:1978 THERMAL ENGINES TEST METHOD.GROSS POWER MEASUREMENT.
NF C26-226*NF EN 60243-1:2013 Electrical strength of insulating materials - Test methods - Part 1 : tests at power frequencies
NF EN 60811-401:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal aging methods - Air oven aging
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF C26-226:1998 Electrical strength of insulating materials. Test methods. Part 1 : tests at power frequencies.
NF E44-502:1991 Small power hydraulic turbines. Field acceptance test.
NF E44-501:1991 LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.
NF X41-572:1988 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure.
NF R11-503:1975 Thermal engine test code. Gross power measurement.
NF G52-320:2006 Leather - Tests for colour fastness - Change in colour with accelerated ageing.
NF C93-684-3*NF EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3 : frequency aging test methods
NF EN 60811-401/A1:2017 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal aging methods - Air oven aging
NF X41-572:2014 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
NF B51-262:1972 Particle boards. Accelerated ageing by boiling water.(so-called test "V 100").
NF T30-049:2017 Paints and varnishes - Cladding paints - Accelarated ageing test

British Standards Institution (BSI)

BS EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS 903-A19:1986(1999) Methods of testing vulcanized rubber — Part A19 : Heat resistance and accelerated ageing tests — [ ISO title : Rubber, vulcanized — Accelerated ageing or heat - resistance tests ]
BS EN 61290-3-3:2014 Optical amplifiers. Test methods. Noise figure parameters. Signal power to total ASE power ratio
BS EN 61290-1-3:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
BS EN 61290-1-3:2005 Optical amplifiers — Test methods — Part 1-3: Power and gain parameters — Optical power meter method
BS 6911-4:1998 Testing earth-moving machinery - Engine test code - Net power
BS EN 61290-1-3:2006 Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
BS ISO 17228:2005 Leather - Tests for colour fastness - Change in colour with accelerated ageing

GM Daewoo

GMKOREA EDS-T-7421-2012 Accelerated Aging Test for Elastomers ????? ???? ???? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ISO188 [Replaced: GMKOREA EDS-T-7421]
GMKOREA EDS-T-7672-2011 Test Method for Resistance of Cellular Material to Heat Ageing

Spanish Association for Standardization (UNE)

UNE 48059:1982 ACCELERATED WEATHERING TEST (ENCLOSED ARC)
UNE 211605:2013 Climatic ageing test of outer covering cables.
UNE 53548:1996 RUBBER VULCANIZED. ACCELERATED AGEING OR HEAT RESISTANCE TESTS.
UNE-EN 12280-1:1998 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
UNE 211605:2022 Climatic ageing test of outer covering cables.
UNE-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
UNE 56406:1992 WOOD PRESERVATIVES. ACELERATED AGEING OF TREATED WOOD PRIOR TO BIOLOGICAL TESTING. EVAPORATIVE AGEING PROCEDURE.

CZ-CSN

CSN 62 1523-1981 Vulcanized rubber. Accelerated heat oxygen ageing test
CSN 62 1528-1976 Ageing tests of rubber in atmoapheric condi- tiona
CSN 62 1522-1981 Vulcanized rubber. Accelerated heat air ageing test
CSN 62 1528-1979 Rubber. Ageing tests in atmospheric conditions
CSN 34 7010 Cast.60-1972 Accelerated ageing teat of plastics coverings

Japanese Industrial Standards Committee (JISC)

JIS K 6257:1993 Accelerated aging test methods for vulcanized rubber
JIS Z 2607:1963 Method for determining deterioration of foundry sands

International Electrotechnical Commission (IEC)

IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 61123:1991 Reliability testing; compliance test plans for success ratio
IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods

BE-NBN

NBN T 31-005-1976 Vulcanized rubers- Accelerated ageing or heat restance tests

International Organization for Standardization (ISO)

ISO 188:1976 Rubber, vulcanized — Accelerated ageing or heat-resistance tests
ISO 188:2023 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ISO 188:1982 Rubber, vulcanized; Accelerated ageing or heat-resistance tests
ISO 789-1:1981 Agricultural tractors — Test procedures — Part 1: Power tests
ISO 17228:2005 Leather - Tests for colour fastness - Change in colour with accelerated ageing
ISO 2440:1983 Polymeric materials, cellular flexible; Accelerated ageing tests

Society of Automotive Engineers (SAE)

SAE J2908-2023 Vehicle Power and Rated System Power Test for Electrified Powertrains

SAE - SAE International

SAE J2908-2017 Vehicle Power Test for Electrified Powertrains

European Committee for Standardization (CEN)

EN 12280-1:1997 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing

Lithuanian Standards Office

LST EN 73+AC-2000 Wood preservatives - Accelerated ageing tests of treated wood prior to biological testing - Evaporative ageing procedure
LST EN 12280-1-2000 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
LST EN 12280-3-2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing

SE-SIS

SIS SS-ISO 188:1990 Rubber, vulcanized — Accelerated ageing or heat-resistance tests
SIS SS IEC 493:1982 Guide for the statistical analysis of ageing test data
SIS 16 92 15-1975 Flexible cellular materials. Accelerated ageing test

RU-GOST R

GOST 9.701-1979 Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance
GOST 9.707-1981 Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
GOST 3839-1970 Low-power electronic tubes. Test methods for life cycle
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST 9.706-1981 Unified system of corrosion and ageing protection. Polimer materials. Test methods for radiation ageing resistance
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven

RO-ASRO

STAS 9676-1974 FLEXIBLE CELLULAR MATERIALS Test to accelerated ageing

Danish Standards Foundation

DS/ISO 188:1989 Rubber, vulcanized. Accelerated ageing or heat-resistance tests
DS/EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
DS/EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
DS/EN ISO 17228:2006 Leather - Tests for colour fastness - Change in colour with accelerated ageing

TR-TSE

TS 1969-1975 VULCAN1ZED RUBBERS ACCELERATED AGEING OR HEAT RESISTANCE TESTS
TS 2826-1977 FLEXIBLE CELLULAR MATERIALS ACCELERATED AGEING TESTS

American National Standards Institute （ANSI)

ANSI/ASTM F2544:2011 Test Method For Determining A-Weighted Sound Power Level Of Central Vacuum Power Units
ANSI/EIA 364-24B:1998 Electric Connectors – Maintenance Aging Test Procedure
ANSI/IEC/ASQ D1123:1997 Reliability Testing - Compliance Test Plans for Success Ratio
ANSI/EIA 364-24B:2009 Maintenance Aging Test Procedure for Electrical Connectors
ANSI/TIA/EIA 455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables

IN-BIS

IS 12394-1988 Iron ore sinter aging test method
IS 3400 Pt.4-1978 Test Methods for Vulcanized Rubber Part IV Accelerated Aging
IS 10810 Pt.56-1987 Cable test methods Part 56 Pressure accelerated aging test

KR-KS

KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC TS 60110-2-2017 Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
KS M ISO 17228-2023 Leather — Tests for colour fastness — Change in colour with accelerated ageing
KS M ISO 17228-2016 Leather－Tests for colour fastness－Change in colour with accelerated ageing

Standard Association of Australia （SAA）

AS 2313.3.1:2005(R2016) Methods of test for single sided and double sided pressure-sensitive adhesive tape - Ageing properties - Accelerated ageing
AS 2313.3.1:2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Ageing properties - Accelerated ageing
AS Z24.4.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 4.1: Stability - Accelerated ageing - Stability - Accelerated ageing

PL-PKN

PN E04160-31-1991 Electric cables Test methods Accelerated ageing in air

American Society for Testing and Materials (ASTM)

ASTM D2126-15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2126-99 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM C481-99 Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM D2126-04 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM C481-99(2016) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM D3826-98 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

YU-JUS

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

IT-UNI

UNI 5409-1964 Elastic materials: vulcanized material test, artificial accelerated aging test under pressure oxidation atmosphere
UNI 7525-1976 External door and window testing. Standard frequency for functional test execution
UNI 5408-1964 Elastomeric materials: vulcanized material tests, artificially accelerated aging tests in furnaces

DE-VDA

VDA 307-2013 EKB 3010 - Brake Noise Dyno Test Certification

GSO

GSO IEC 60811-401:2013 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

South African Bureau of Standard

SANS 54:2003 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests