GB/T 1219-2000 in English

SUPERSEDED

Geometrical product specification-Dimensional measuring instruments: Dial gauges-Design and metrological requirements

Issued on:2000-09-26
Implemented on:2001-02-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $340.00
$330.00

Standard No:	GB/T 1219-2000
Document status:	SUPERSEDED
Superseded by:	GB/T 1219-2008 Dial gauges
Superseded on:	2008-07-01
Title in English:	Geometrical product specification-Dimensional measuring instruments: Dial gauges-Design and metrological requirements
Title in Chinese:	几何量技术规范长度测量器具：指示表设计及计量技术要求
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2000-09-26
Implemented on:	2001-02-01
ICS Classification:	17.040.30-Measuring instruments
Chinese Classification:	J42-Measuring tool and instrument
Professional Classification:	GB-National Standard
Related Keywords:	metrological requirements scopethis standard technical requirements specification-dimensional measuring instruments dial gauges-design geometrical product
Related Topics:	Metering technology Metrology and Testing Technology Metrology and Testing Technology metrological testing technology Metrology and Measurement Temperature indicator paint technical requirements Measuring Instrument Technology Metering technology Measuring Instrument Technology Measurement Specifications Specifications of measuring equipment Metering Technology Instruments Geometry Measuring Instruments and Technology GBT1219 GB/T 1219-2000 GB/T 1219-2008 What are the main technical indicators of measuring instruments? How many star lines should be drawn on the flow meter? Measurement specification requirements for differential pressure gauges Thermometer quality standards and technical requirements Methods for establishing standards for length measuring instruments Technical Specifications for Chemical Metrology Level 1 meter measurement requirements Measuring fixture design Changsha Optical Measurement Standard Instruments gb/t 1219-2000

《GB/T 1219-2000几何量技术规范长度测量器具:指示表设计及计量技术要求》由TC132（全国量具量仪标准化技术委员会）归口，主管部门为中国机械工业联合会。
本标准规定了指示表的型式与尺寸、技术要求、检验方法、标志与包装等。本标准适用于表壳直径不大于60mm，分度值为0.01mm、0.002mm量程不超过10mm，分度值为0.001mm量程为1mm的指示表。

Scope

This standard stipulates the type and size, technical requirements, inspection methods, signs and packaging of the indicator. This standard is applicable to the indicator table whose case diameter is not more than 60mm, the division value is 0.01mm, and the range of 0.002mm is not more than 10mm, and the division value is 0.001mm, and the range is lmm.

More samples: JGJ 94-2008 NB/T 47013.2-2015 GB 50021-2001(2009)

Sample only — not a preview of GB/T 1219-2000

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 6060.3-2008 in English

Surface roughness comparison specimen － Part 3：Spark-eroded，shot-blasted，grit-blasted，lapped，filed and polished surface
2008-02-28
GB/T 35095-2018 in English

Pi tapes
2018-05-14
GB/T 24635.3-2025 in English

Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 3: Use of calibrated workpieces or measurement standards
2025-05-30
GB/T 22091.1-2008 in English

Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1: Verification of parallel internal and taper external threads
2008-06-25
GB/T 33151-2016 in English

Gauges of HSK tapers—Inspection
2016-10-13
GB/T 1957-2006 in English

Tolerances and general features for plain limin gauges
2006-02-05
GB/T 16455-2008 in English

Bar and frame level meter
2008-06-25
GB/T 39516-2020 in English

Micro nano standard samples (geometric)
2020-11-19
GB/T 5106-2012 in English

Straight cylindrical involute splines - Gauge
2012-12-31