GB/T 1219-2008 in English

《GB/T 1219-2008指示表》由TC132（全国量具量仪标准化技术委员会）归口，主管部门为中国机械工业联合会。
本标准规定了指示表的术语和定义、型式与基本参数、要求、检验方法、标志与包装等。本标准适用于分度值为0.10mm、0.01mm，量程不超过100mm；分度值为0.002mm，量程不超过10mm；分度值为0.001mm，量程不超过5mm的指示表。

Scope

This standard specifies the terms and definitions, form and basic parameters, requirements, inspection methods, signs and packaging of the indicator table. This standard is applicable to indicators with a division value of 0.10 mm and 0.01 mm and a range of no more than 100 mm; a division value of 0.002 mm and a range of no more than 10 mm; a division value of 0.001 mm and a range of no more than 5 mm. Note: An indicator with a division value of 0.10mm is also called a ten-point indicator; an indicator with a division value of 0.01mm is also called a dial indicator; an indicator with a division value of 0.001mm and 0.002 mm is also called a ten-point indicator. for dial gauge