GB/T 8123-2007 in English
VALIDDial test indicators
- Issued on:2007-04-30
- Implemented on:2007-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
| Standard No: | GB/T 8123-2007 |
| Document status: | VALID |
| Title in English: | Dial test indicators |
| Title in Chinese: | 杠杆指示表 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2007-04-30 |
| Implemented on: | 2007-10-01 |
| Superseding: |
GB/T 8123-1998 Dial test indicators
|
| ICS Classification: | 17.040.30-Measuring instruments |
| Chinese Classification: | J42-Measuring tool and instrument |
| Professional Classification: | GB-National Standard |
| Related Keywords: | dial test indicators scopethis standard
test methods test inspection methods lever indicator gauges |
| Related Topics: | lever
multiple leverage capital leverage Allowable error Cedar Leverage leverage rules Quadrupole Demonstration GBT8123 GB/T 8123-1998 GB/T 8123-2007 Leverage indicator indicator Indicator calibration |
《GB/T 8123-2007杠杆指示表》由TC132（全国量具量仪标准化技术委员会）归口，主管部门为中国机械工业联合会。
本标准规定了杠杆指示表的术语和定义、型式与基本参数、要求、试验方法、检查条件、检查方法、标志与包装等。本标准适用于分度值或分辨力0.01mm、量程不超过1.6mm，分度值或分辨力为0.001mm和0.002mm、量程不超过0.4mm的杠杆指示表。
Scope
This standard specifies the terms and definitions, types and basic parameters, requirements, test methods, inspection conditions, inspection methods, signs and packaging of lever indicator gauges. This standard is applicable to lever indicators with a division value (resolution) of 0.01mm and a range of no more than 1.6mm, and a division value (resolution) of 0.001mm and 0.002m and a range of no more than 0.4mm.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 24635.3-2025 in English
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 3: Use of calibrated workpieces or measurement standards
2025-05-30 -
GB/T 9056-2004 in English
Metal ruler
2004-02-10 -
GB/T 22091.1-2008 in English
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1: Verification of parallel internal and taper external threads
2008-06-25 -
GB/T 5106-2012 in English
Straight cylindrical involute splines - Gauge
2012-12-31 -
GB/T 17163-2022 in English
Glossary of terms for dimensional measuring instruments—General terms
2022-07-11 -
GB/T 8061-2022 in English
Micrometer with dial comparator
2022-07-11 -
GB/T 35095-2018 in English
Pi tapes
2018-05-14 -
GB/T 33151-2016 in English
Gauges of HSK tapers—Inspection
2016-10-13 -
GB/T 26090-2010 in English
Gear circular pitch measuring instrument
2011-01-10 -
GB/T 39516-2020 in English
Micro nano standard samples (geometric)
2020-11-19
