Thin film oxidation test

Thin film oxidation test, Total:198 items.

The international standard classification for "Thin film oxidation test" includes: Metallic coatings , Surface treatment , Rubber and plastics products , Films and sheets , Packaging materials and accessories , Waxes, bituminous materials and other petroleum products , Protection against dangerous goods , Surface treatment and coating in general , Other standards related to sterilization and disinfection , Other organic chemicals .

The Chinese standard classification for "Thin film oxidation test" includes: Metal nondestructive testing method , Material Protection , Plastic profile , Metal physical and chemical property test method in general , Basic standards and general methods for synthetic resin and plastic , Special electronic technology material , Packaging method , Electrical insulating material and its products , Petroleum asphalt , Marking, packaging, transport and storage in general , Technical management , Public medical equipment , Organic chemicals in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8752-2006 Anodizing of aluminium and its alloys - Check of continuity of thin anodic oxide coating - Copper sulphate test
GB/T 14620-1993 ceramic substrates for thin film integrated circuits
GB/T 21795-2008 Testing of chemicals - Simulation test Aerobic sewage treatment - Biofilms
GB/T 14620-2013 Alumina Ceramic Substrates for Thin Film Integrated Circuits
GB/T 13541-1992 Test methods of plastic films for electrical purposes
GB/T 12027-2004 Plastics— film and sheeting—Determination of dimensional change on heating
GB/T 12967.3-1991 Anodizing of aluminium and aluminium alloys-Copper accelerated acetic acid salt spray test for anodic oxide coatings (ASS test)
GB/T 12027-1989 Test method for dimensional stability of plastic films
GB/T 6808-1986 Anodizing of aluminium and its alloys--Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
GB/T 5304-2001 Asphalt thin-film oven test method
GB/T 13022-1991 Plastics--Determination of tensile properties of films
GB/T 31727-2015 Test method for attrition rate of transparent plastic film
GB/T 19789-2005 Packaging materials—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor
GB/T 15519-2002 Chemical conversion coatings - Black oxide coating on iron and steel- Specification and test methods
GB/T 16276-1996 Test method for blocking of plastic film
GB/T 8752-1988 Anodizing of aluminium and aluminium alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test
GB/T 31726-2015 Test method for anti-fogging property of plastic film
GB/T 17711-1999 The DC electric resistance test method for the critical temperature Tc of a YBa2Cu3O7-δ superconducting thin film
GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film

Professional Standard - Electron

SJ 20518-1995 Specification for Ta2O5 films for use in piezoelectric devices
SJ 20717-1998 Specification for ZnO piezoelectric films

Professional Standard-Packaging

BB/T 0089-2022 Aluminum oxide film for packaging

未注明发布机构

DIN 55543-4 E:2016-05 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
DIN 16995 E:2015-04 Films for packaging; plastic films; properties, testing
DIN 55543-4 E:2009-08 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
ASTM RR-D02-1836 2016 D4742-Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

Professional Standard - Aviation

HB 5060-1977 Aluminum and aluminum alloy chemical oxide film quality inspection (trial)
HB 5061-1977 Quality Inspection of Magnesium Alloy Chemical Oxidation Film (Trial)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
GB/T 19789-2021 Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor

Professional Standard - Aerospace

QJ 485-1979 Test method for resistance to discoloration of copper and copper alloy oxide films
QJ 485-1990 Test Method for Color Changing Resistance of Copper and Copper Alloys Oxide Film
QJ 2030-1990 Test method for stability of chemical oxide film on iron and steel

Taiwan Provincial Standard of the People's Republic of China

CNS 8411-1982 Methods of Test for Abrasion Resistance of Anodic Oxidation Coatings on Aluminum and Aluminum Alloys
CNS 13335-1994 Method of Test for Dart Impact Resistance of Plastic Films and Sheets
CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)
CNS 8406-1989 Methods of Test for Thickness of Anodic Oxidation Coatings on Aluminium and Aluminium Alloys
CNS 13787-1996 Methods of Test for Tear Resistance of Plastic Films and Sheets
CNS 13923-1997 Method of test for thickness of plastic film and sheeting
CNS 13336-1994 Method of Test for Tensile Properties of Plastic Films and Sheets
CNS 8409-1989 Methods of Test for Resistance to Cracking By Deforming of Anodic Oxidation Coatings on Aluminum and Aluminum Alloys
CNS 8407-1989 Methods of Test for Sealing Quality and Anodic Oxidation Coatings on Aluminium and Aluminium Alloys
CNS 8410-1982 Methods of Test for Corrosion Resistance of Anodic Oxidation Coatings on Aluminum and Aluminum Alloys

工业和信息化部

HG/T 5299-2018 Optical polyethylene terephthalate(PET) transparent hardening film for indium tin oxide(ITO)
HG/T 4950-2016 Optical polyethylene terephthalate(PET) anti-glare hardening film for ITO
HG/T 5856-2021 Optical functional films—Anti-fouling hard coating film

Professional Standard - Chemical Industry

HG/T 5297～5300-2018 Diffusion composite polyethylene terephthalate (PET) film, high temperature resistant transparent high barrier film, transparent polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating and indium tin Refractive index matching cur

Professional Standard - Petrochemical Industry

SH/T 0736-2003 Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test)

Professional Standard - Energy

NB/T 10452-2020 Insulating liquids-Epoxidized soybean oil for metallized film capacitors

国家能源局

NB/T 10452-2026 Epoxy soybean oil for insulating liquid metallized film capacitors

Professional Standard - Agriculture

GB 13022-1991 Plastics-Determination of tensile properties of films

Military Standard of the People's Republic of China-General Armament Department

GJB 983.1-1990 Military Rubber Film Test Method Determination of Change in Thickness of Liquid Immersion
GJB 983.5-1993 Military rubber film test method low temperature folding test
GJB 983.2-1990 Military Rubber Film Test Method Determination of Mass Change in Liquid Immersion

国家食品药品监督管理局

YY/T 1479-2016 Sterility test method for membrane filters

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3705-2015 Plastic film and sheet dry heat atmospheric exposure test method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33051-2016 Optical functional films--Superficial hardening film--Determination of thickness of hardening coating

Korean Agency for Technology and Standards (KATS)

KS M 2452-2003 Test method for oxidation stability of gasoline automotive engine oils by thin-film oxygen uptake(TFOUT)
KS M 2452-2003(2018) Oxidation stability test method for automobile gasoline engine oil using thin film heating induction technique (TFOUT)
KS D ISO 11408-2001(2011) Chemical conversion coatings－Black oxide coating on iron and steel－Specification and test methods
KS D ISO 11408-2013 Chemical conversion coatings－Black oxide coating on iron and steel－Specification and test methods
KS M 3089-1994 Testing method for thickness of plastic film and sheeting
KS M 3089-2013 Testing method for thickness of plastic film and sheeting
KS C IEC 60648:2014 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
KS M ISO 23559:2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 23559:2014 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M 3088-1994 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS D 8316-2021 Test method for corrosion resistance of anodic oxidation coatings on aluminium and aluminium alloys
KS M 3088-2013 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS D 8315-2021 Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys
KS D 8514-2023 Test methods for dielectric strength of anodic oxidation coatings on aluminium and aluminium alloys
KS D 8315-1986 Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys
KS D 8315-1996(2021) Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys

International Organization for Standardization (ISO)

ISO 4746:1977 Oxygen-free copper; Scale adhesion test
ISO 11408:1999 Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods
ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
ISO 2085:1976 Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test
ISO 23559:2007 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 2135:1976 Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings

American Society for Testing and Materials (ASTM)

ASTM D7098-08 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D4742-08e1 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D7098-21 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-05 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-08e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-06e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-06 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-08(2015) Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM F1151-88(1998) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
ASTM D4742-96 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D4742-02 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D4742-23 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D4742-02a Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM D4742-08 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM F21-65(2007) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM D4742-17 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM F1151-88(2003) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
ASTM D4742-16 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
ASTM F1151-88(2008) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
ASTM D1239-22 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D3985-24 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM F390-98(2003) Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM F22-02 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F22-02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F22-13 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM D6580-00(2005) Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D6580-00(2009) Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D3985-05 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D6580-00 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM F3136-22 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM D2923-01 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM D2923-13 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM F627-99(2003) Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
ASTM D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D2923-95 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM D1239-98 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D123-03 Standard Terminology Relating to Textiles
ASTM D5747-95a(2002) Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM D2354-10 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
ASTM F2750-09 Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
ASTM D2923-06 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM F627-99 Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
ASTM D5747-95a Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM D1239-07 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D1239-98(2006)e1 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D2923-08 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM D123-15 Standard Terminology Relating to Textiles
ASTM D3985-02e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D123-09 Standard Terminology Relating to Textiles
ASTM D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D5747-08 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM D123-15be1 Standard Terminology Relating to Textiles
ASTM D123-15a Standard Terminology Relating to Textiles
ASTM D1204-07 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

European Committee for Standardization (CEN)

EN 12373-16:2001 Aluminium and Aluminium Alloys - Anodizing - Part 16: Check for Continuity of Thin Anodic Oxidation Coatings - Copper Sulfate Test

(U.S.) Ford Automotive Standards

FORD FLTM EU-BQ 010-1-2000 FILM THICKNESS MEASUREMENT FOR ANODIZED ALUMINUM
FORD FLTM AI 103-03-2000 PHOTOOXIDATION AND FILM LOSS IN COATINGS, METHOD A: PHOTOOXIDATION AND FILM LOSS OF COATINGS ON SILICON DISKS

German Institute for Standardization

DIN 16726:2011 Plastic sheets.Testing
DIN 42115-3:1988 Membrane switches; membrane-switch-arrays; ratings, requirements, tests
DIN 16995:1992 Films for packaging; plastic films; properties, testing
DIN 55543-1:2010-01 Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
DIN 42115-2:1988 Membrane switches; membrane-switch-keyboards without sensing point; ratings, requirements, tests
DIN 16995:2016-04 Films for packaging - Plastic films - Properties, testing
DIN 16995:2016 Films for packaging - Plastic films - Properties, testing
DIN 16995:2009 Films for packaging - Plastic films - Properties, testing
DIN 55543-4:2010 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of polyethylene films
DIN 55543-4:2017-03 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
DIN 55543-4:2017 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath

British Standards Institution (BSI)

BS ISO 11408:1999 Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods
BS ISO 23559:2011 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
BS EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test

SCC

NS 4011:1980 Test methods for plastic film and sheeting
NS 4011:1969 Test methods for plastics film and sheeting
BS 6161-8:1981 Methods of test for anodic oxidation coatings on aluminium and its alloys-Determination of the fastness to ultraviolet light of coloured anodic oxide coatings
AASHTO T 240-2006 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
BS 2782-6 METHOD 643B:1996 Methods of testing plastics. Dimensional properties. Determination of dimensional change on heating of film and sheeting
DIN 16995 E:2015 Draft Document - Films for packaging - Plastic films - Properties, testing
06/30130313 DC ISO 23559. Plastics. Film and sheeting. Guide for the testing of thermoplastic films
NS 4011:1977 Test methods for plastic film and sheeting
NS 4011:1985 Test methods for plastic film and sheeting
BS 6161-2:1981 Methods of test for anodic oxidation coatings on aluminium and its alloys-Determination of thickness of anodic oxide coatings: non-destructive measurement by split-beam microscope
BS 6161-1:1984 Methods of test for anodic oxidation coatings on aluminium and its alloys-Determination of mass per unit area (surface density) of anodic oxidation coatings (gravimetric method)
DIN 55543-4 E:2016 Draft Document - Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath

Society of Automotive Engineers (SAE)

SAE AMS2526D-2013 Molybdenum Disulfide Coating, Thin Lubricating Film, Impingement Applied

CZ-CSN

CSN 64 0604-1980 Plustios. TudhíIc U'st of filins.

PL-PKN

PN C89095-1971 Plastics sheeting Test for blocking of plastic film

American National Standards Institute （ANSI)

ANSI/ASTM D6287:1998 Practice for Cutting Film and Sheeting Test Specimens
ANSI/ASTM D4321:1999 Test Method for Package Yield of Plastic Film (08.02)

RU-GOST R

GOST 14236-1981 Polymer films. Tensile strength test method

SE-SIS

SIS SS 84 46 16-1983 Sacks of plastic film - Drop test

ES-AENOR

UNE 28 017 h6 Test tubes for aviation film obtained
UNE 28 017 h8 Tensile and enlargement testing of aerospace films

Japanese Industrial Standards Committee (JISC)

JIS K 7127:1989 Testing method for tensile properties of plastic films and sheets
JIS K 7130:1992 Testing methods for thickness of plastic film and sheeting
JIS K 7128:1991 Testing methods for tear resistance of plastic film and sheeting
JIS K 7124:1987 Testing method for dart impact resistance of plastic film and sheeting
JIS H 8680:1993 Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys
JIS K 7125:1987 Testing method for static and kinetic coefficients of friction of plastic film and sheeting
JIS H 8686:1994 Test methods for image clarity of anodic oxide coating on aluminium and aluminium alloys
JIS C 2151:2006 Testing methods of plastic films for electrical purposes
JIS H 8683:1994 Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys
JIS C 2151:1990 Testing methods of plastic films for electrical purposes
JIS C 2151:2019 Testing methods of plastic films for electrical purposes
JIS H 8681:1988 Test methods for corrosion resistance of anodic oxidation coatings on aluminium and aluminium alloys
JIS H 8689:2013 Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
JIS K 5600-7-6:2002 Testing methods for paints -- Part 7: Long-period performance of film -- Section 6: Natural weathering
JIS H 8682:1993 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys

GOSTR

GOST 34281-2017 Oxo-biodegradable packaging. Method for the assessment of oxo-biodegradation of polymer films

FI-SFS

SFS 3891-1977 Anodizing of aluminum and its alloys. Overall test of thin oxide layer. Copper sulfate test

KR-KS

KS M ISO 23559-2019 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M 2452-2003(2023) Oxidation stability test method for automobile gasoline engine oil using thin film heating induction technique (TFOUT)

Defense Logistics Agency

DLA DSCC-DWG-01032 REV C-2013 RESISTOR, CHIP, FIXED, FILM, BERYLLIA SUBSTRATE, HIGH POWER, STYLE 1206

Association Francaise de Normalisation

NF EN 14575:2005 Geomembranes - Selective test method for the determination of oxidation resistance
NF A91-479:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test.
NF T60-182:1990 Petroleum products - Test method for determining the stability of gasoline engine oils by thin film oxygen absorption (TFOUT)
AC T51-808:2012 Plastics - Experimental evaluation of the oxobiodegradability of polyolefin materials in film form - Methodology and requirements

Danish Standards Foundation

DS/ISO 2085:1988 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coatings. Copper sulphate test

TR-TSE

TS 1086-1972 METHOD FOR THIN F?LM ?VEN TEST OF BITUMINOUS MATERIALS

GSO

GSO 1120:2002 METHODS OF TESTING POLYETHYLENE SHEETING FOR AGRICULTURAL PURPOSES