Auto inspection

Auto inspection, Total:455 items.

The international standard classification for "Auto inspection" includes: Diagnostic, maintenance and test equipment , IT applications in transport and trade , Production. Production management , Flow in closed conduits , Air quality , Road vehicles in general , Ignitability and burning behaviour of materials and products , Road vehicle tyres , Metrology and measurement in general , Measurement of electrical and magnetic quantities , Road transport , Bodies and body components , Transmissions, suspensions , Road vehicle systems , Internal combustion engines for road vehicles , Rubber and plastics industries (Vocabularies) , Services , Linear and angular measurements .

The Chinese standard classification for "Auto inspection" includes: Highway vehicle servicing installation , Highway vehicle utilization, maintenance and service , Computer application , Mechanics Measurement , Length Measurement , Chemical Measurement , Time and Frequency Measurement , Basic standards and general methods , Hygiene, safety and labor protection , Car , Tyre , Instruments and test devices for vehicle , Electrical parametric test and power supply unit , Traffic control in general , Technical management , Chemical reagent in general , Vehicle management , Vehicle body (cab) and accessories , Automobiles in general , Special materials and their products , Bearing system , Engine body and moving parts , Intake, exhaust and fuel supply systems , Transmission system , Industrial wool and felt , Supply and Use Relation , Health quarantine , Hoisting machinery , Hydraulic lift system , Traffic safety detecting equipment , Lubricating grease .

Professional Standard - Traffic

JT/T 425-2000 Technical standard rquirement for technicians in charge of quality-inspection of auto maintenance and repair
JT/T 1012-2015 Detecting Instrument for Contour Dimensions of Vehicle
JT/T 510-2004 Technical specifications for vehicles anti-lock braking systems test
JT/T 633-2005 Automotive suspension and steering clearance tester
JT/T 512-2004 Specification for the maintenance and inspection of compressed natural gas vehicle
JT/T 442-2001 Appraisal way of automobile driving suitability test
JT/T 507-2004 Automobile side slip tester
JT/T 478-2002 Technical specifications for computer control system of vehicle inspecting station
JT/T 503-2004 Automobile engine multi-analyzer
JT/T 649-2006 Multi-function automobile brake tester
JT/T 448-2001 Automotive suspension tester
JT/T 1013-2015 Vehicle Fuel Consumption Instrument Based on Carbon Balance Method
JT/T 511-2004 Specification for the maintenance and inspection of liquified petroleum gas vehicle
JT/T 638-2005 Cleaning and detecting instrument for spray nozzles of vehicle engine
JT/T 1165-2017 Automobile steering system inspection without disassembly
JT/T 1010-2015 Routine Inspection of Liquefied Natural Gas Vehicle
JT/T 634-2005 Automotive front-wheel turning angle tester
JT/T 1011-2015 Routine Inspection Methods for Battery Electric Vehicle
JT/T 226-1996 Testing specification for automobile brake fluid

Taiwan Provincial Standard of the People's Republic of China

CNS 13181-3-1995 The Method of Test of Shut off Valves for LPG Automobile Fuel Systems
CNS 7886-1986 Method of Photometric Test for Lighting and Signaling Equipment for Automobiles
CNS 8944-1991 Method of Test for Tyre Valves for Automobiles
CNS 8948-1986 Method of Test for Fuse Box for Automobiles
CNS 2744-1989 Method of Disassembly Inspection for Automobiles
CNS 8484-1985 Method of Test for Control Cables for Automobles
CNS 5433-1994 Method of Test for Hydraulic Trolley Jacks for Automobiles
CNS 3973-1990 Method of test for seat belts for automobiles (→CNS 3972)
CNS 13181.3-1995 The Method of Test of Shut off Valves for LPG Automobile Fuel Systems
CNS 10156-1986 Method of Test for Backup Alarm for Automobiles
CNS 2946-1986 Method of Test for Automotive Lamp Bulbs
CNS 10162-1983 Method of Test for Metal Tubes and Tubing for Automobiles
CNS 10704-1983 Method of Test for Front Light Aiming of Automobiles
CNS 4119-1990 Method of test of seat belt retractors for automobiles (→CNS 3972)
CNS 5776-1986 Method of Test for Electric Horns for Automobiles
CNS 12626-1992 Method of Test for Electronic Taximeter
CNS 13181.6-1995 The Method of Test of Containers for LGP Automobile Fuel Systems
CNS 4983-1992 Method of Test for Warning Reflex Reflectors for Automobiles
CNS 5652-1981 Lube Oil Filter Performance Test for Automobile
CNS 9596-1986 Method of Test of Strength for Automobile Suspension Springs
CNS 7897-1981 Method of Test for Automobile Air Conditioners
CNS 9171-1986 Method of Test for Telescopic Shock Absorbers for Automobiles
CNS 5651-1989 Method of Test for Fuel Filter for Automobiles
CNS 10986-1991 Method of Test for Safety Glass for Road Vehicles
CNS 8676-1987 Method of Test for Clutch Disk Assemblies for Automobiles
CNS 11717-1986 Method of Test of Cassette Players for Automobile Use
CNS 13181-6-1995 The Method of Test of Containers for LGP Automobile Fuel Systems
CNS 6812-1987 Method of Test for Hot Water Heaters of Automobiles
CNS 6649-1992 Method of Test for Low-Voltage Cables for Automobiles
CNS 6647-1992 Methods of Test for High-Voltage Cables for Automobiles
CNS 11499-1986 Method of Test for Wiper Blades and Wiper Arms for Automobile
CNS 7894-1995 General Rules of Testing Methods for Switches of Automobiles
CNS 8674-1987 Method of Test for Clutch Cover Assemblies for Automobiles
CNS 10333-1986 Method of Test for Nylon Tubes for Air Brake Piping of Automobiles
CNS 9987-1983 Method of Test for Blind Rivets for Automobiles

National Metrological Verification Regulations of the People's Republic of China

JJG 688-2007 Verification Regulation of Vehicle Exhaust Emissions Measuring Instruments
JJG 688-2017 Vehicle Exhaust Emissions Measuring Instruments
JJG 641-2006 Verification Regulation of Liquefied Petroleum Gas Tank Car Capacity
JJG 1160-2019 Loading Method Automobile Brake Testers
JJG(交通) 003-2005 Roller Opposite Forces Type Broake Tester
JJG 908-1996 Verification Regulation of Slipe Plate Type Automobile Side Slipe Tester
JJG(交通) 062-2005 Automotive Suspension Measuring Instrument
JJG(交通) 004-2005 Roller Type Automobile Speedomter Tester
JJG(交通) 127-2015 Vehicle Fuel Consumption Instrument Based on Carbon Balance Method
JJG 1118-2015 Electronic Truck Scale (Method of Load Measurement Apparatus of Electric Weighing Instrument)
JJG(交通) 005-2005 Automotive Axles Weight Dynamic Tester
JJG(交通) 021-1999 Verification Regulation of Automotive Chassis Dynamometer's Combine Aligner
JJG 517-2009 Taximeters
JJG 688-1990 Verification Regulation of Vehicle Exhaust Emissim Measuring
JJG 908-2009 Verification regulation of automobile side slip tester
JJG 738-1991 Taxi Meter Standard equipment
JJG(交通) 002-2005 Slip Type Automobile Side Slip Tester
JJG 738-2024 Verification Devices for Taximeters
JJG 517-1998 Verification Regulation of TAXIMETER
JJG(京)45-2011 Remote Sensing Ignition Engine Vehicles Detector for Emit Harmful Gas
JJG(交通) 060-2005 Multi-function Automobile Brake Tester
JJG(京) 45-2011 Remote Sensing Ignition Engine Vehicles Detector for Emit Harmful Gas
JJG 641-1990 Liquefied Petroleum Gas Tank Car Volume
JJG(交通) 007-2005 Steering Force-Steeting Angle Tester of Motor Car
JJG(交通) 015-1999 Verification Regulation of Headlamp for Vehicle Tester's Aligner
JJG(交通) 013-2005 Automobile Engine Measuring Instruments
JJG(交通) 017-1999 Verification Regulation of Slip Plate Type Automobile Side Slip Tester's Aligner
JJG 908-2023 Automobile Side Slip Testers

交通运输部

JT/T 507-2021 Automobile side slip tester
JT/T 503-2023 Automotive engine comprehensive detector
JT/T 1344-2020 Specification for the inspection and maintenance of battery electric vehicle
JT/T 448-2021 Automotive suspension tester
JT/T 1424-2022 Technical requirements for motor vehicles, trailers, combination vehicles based on the modular concept
JT/T 478-2017 Technical specifications for computer control system of automobile inspection agencies

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 15082-1999 Motor vehicles—Speed meters
GB/T 19533-2024 Periodic inspection and evaluation of steel gas cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
GB/T 15746.1-1995 The standard of qualitative assessment for vehicle repair--Major of vehicles
GB/T 18344-2016 Specification for the inspection and maintenance of motor vehicle
GB/T 12677-1990 Motor vehicles－Technical condition－Insnpection method
GB/T 25349-2010 Technical specification for inspection and maintenance of vehicle using ethanol gasoline
GB/T 12674-2024 Motor vehicles，trailers and combination vehicles mass parameters measurement method
GB/T 31776-2015 Determination method of methanol content in methanol gasoline for motor vehicles
GB/T 12548-2016 Motor vehicles speedometer and odometer calibration method
GB/T 4780-2000 Terms for motor vehicle body
GB 8410-1994 Flammability of automotive interior materials
GB/T 13563-2007 Roller automobile speedometer tester
GB/T 13563-1992 Roller speedometer tester
GB/T 11798.3-2001 Motor vehicle safety testing equipment-Technical requirements of verification-Part 3:Technical requirements of verification for gasoline motor vehicle emission analyzer
GB/T 15746.2-1995 The STANDARD of qualitative assessment for vehicle repair－Major repair of automobile engines
GB/T 13564-1992 Roller opposite forces type automobile brake tester
GB/T 43191-2023 On-site testing instruments of AC charging spot for electric vehicles
GB 8410-2006 Flammability of automotive interior materials
GB/T 13564-2005 Roller opposite forces type automobile brake tester
GB/T 32838-2016 Nondestructive testing method of laser shearography for vehicle tyre
GB/T 17993-1999 Specifications for multiple-function detecting test station of vehicle transport
GB/T 15746.3-1995 The standard of qualitative assessment for vehicle repair--Major repair of bodies
GB/T 23664-2009 Test method of non-destructive inspection for automobile tyres - X-ray method
GB/T 44500-2024 Code of practice for new energy vehicles safety operation inspection
GB/T 17993-2005 General requirements for the competence of automotive multiple-Function test station
GB/T 15746-2011 The method of qualitative assessment for vehicle repair
GB/T 18344-2001 Specification for the inspection and maintenance of motor vehicle
GB/T 12548-1990 Motor vehicles－Speedometer and odometer－Calibration method

Group Standards of the People's Republic of China

T/CES 024-2018 Technical specification for field test of electric vehicle off-board conductive charger
T/ITS 0054-2016 Test methods of vehicle gateway based on public telecommunication network
T/QGCML 1884-2023 Car front bumper blind spot detection controller bracket
T/QGCML 1880-2023 Car bumper detection device
T/QGCML 1360-2023 Technical Specifications for Detection of Mobile Phone Internet Software for Automobiles
T/ZJEMA 0006-2023 Methods for appearance inspection of vehicle emission measurement
T/CEC 214-2019 Special requirements for electric vehicle off-board charger used in high temperature coastal areas
T/CAS 658-2022 Examination methods and control index of microorganism in automobile cabin
T/CSAE 283-2022 Off-line detection method of intelligent connected automobile vision sensor
T/ZJEI 003-2023 Industrial Internet - Automotive manufacturing - General requirements and test methods for on-line 5G-based automotive appearance defect detection applications
T/GAPEC 002-2019 Specification for Quality Inspection of electric vehicle AC charging spot
T/ZJEMA 0006-2024 Methods for appearance inspection of vehicle emission measurement
T/QGCML 1057-2023 Design specifications for automobile interior and exterior trim inspection tools
T/CASME 592-2023 Automobile wiper quality and testing requirements
T/CASME 876-2023 Automatic engine automatic leak testing machine
T/GHDQ 84-2021 Intelligent connected vehicle Test requirements for signature verification server
T/QGCML 1053-2023 Car fender assembly inspection tool
T/CAQI 329-2023 Electric vehicle traction battery testing service specification
T/ZQB 001-2022 Traction type parking brake performance tester for vehicle
T/ZSECA 008-2021 Inspection Regulations for Electric Vehicle Charging Facilities
T/GHDQ 78-2021 Intelligent connected vehicle Test requirements for security authentication gateway
T/CAEE 031-2020 Specifications for processing and inspection of electric vehicle charging station housing
T/GDCKCJH 060-2022 Testing method for automatic testing line of vehicle domain control unit
T/QGCML 2223-2023 Automobile central control box assembly and inspection line
T/LADA 013-2018 Specifications for service management of automobile inspection line
T/QGCML 1882-2023 Detection method of car bumper paint surface defects
T/CMA JD024-2020 Detecting device of vehicle travelling data recorder
T/QGCML 4320-2024 Car seat electrical inspection equipment
T/CEC 215-2019 Inspection and test specification for electrical vehicle off-board charger Special requirements for high temperature coastal areas
T/ACCEM 008-2024 "Technical Specifications for Automobile Maintenance, Inspection and Diagnosis"
T/QGCML 1052-2023 Car rear seat assembly inspection tool
T/ZQCSH 024-2021 Automobile 4S store safety inspection requirements
T/SASJL 0021-2024 Performance testing method for automobile batteries in cold regions
T/GHDQ 80-2021 Intelligent connected vehicle key management system safety inspection requirements
T/ZQCSH 094-2021 Purchasing Specifications for Automobile Boutiques in Automobile 4S Stores
T/QGCML 3174-2024 Technical Specifications for Preparation of Engine Intake Connecting Pipes
T/JTAIT 2-2021 Near-infrared spectroscopy for rapid detection of ethanol gasoline (E10) for vehicles
T/IMAS 033-2021 Rapid derection method of motor vehicle gasoline Near infrared spectrometory
T/QGCML 3150-2024 Specification for gap detection of automobile steering gear assembly
T/ZQCSH 007-2021 4S shop car repair quality inspection specification
T/CI 041-2021 Technical specification and test method for Burn proof motor gasoline
T/QGCML 3238-2024 New energy vehicle hydrothermal PTC intelligent detection system
T/CIMA 0004-2018 Testing equipment on-site for AC charging spot of electric vehicle
T/CSEE 0216-2021 Specifications for operation and maintenance of electric vehicle charging stations
T/ZKJXX 00002-2019 Technical requirements for verification device of vehicle travelling data recorders
T/CMISHA 1004-2023 Requirements for safety and validation of equipment and facilities in automobile manufacturing enterprise
T/CASME 506-2023 Auto switch universal test stand
T/CEC 216-2019 Inspection and test specification for electrical vehicle AC charging spot Special requirements for high temperature coastal areas
T/JSATL 2-2017 Service specification for automotive multiple-function testing
T/GPCIA 0006-2022 Instant quantitative determination of automobile gasoline with near-infrared spectrometry
T/QGCML 1054-2023 Automobile high-precision headlight assembly inspection tool
T/QGCML 3014-2024 Automobile Annual Inspection Consulting Service Specifications
T/CIMA 0003-2018 Testing equipment on-site for off-board charger of electric vehicle
T/QGCML 1558-2023 Technical Specifications for Detection of Pressure Sensors for Automobiles
T/CEC 366-2020 Special requirements for 63A AC charging system for electric vehicles
T/QGCML 1056-2023 Auto parts hole position deviation size detection device

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35349-2017 Parking brake performance test methods for vehicles
GB/T 34592-2017 Steering force steering angle detector for steering wheel of automobile
GB/T 19533-2004 Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
GB/T 17993-2017 General requirements for the competence of automotivemultiple-function inspection agency

Professional Standard - Automobile

QC/T 943-2013 Test Method for Lead and Cadmium in Automobile Materials
QC/T 588-1999 Evaluation method for quality inspection of dump truck
QC/T 584-1999 Evaluation method for quality inspection of automobile undercarriage product
QC/T 297-1999 Ball tape ruler for automobile rim inspection
QC/T 29018-1991 Metallographic test for carbonitriding gear of automobile
QC/T 502-1999 Metallographic test for induction quenching parts of automobile
QC/T 717-2004 Run out requirements and measuring methods of automotive wheels
QC/T 275-2008 Metallographic inspection of wear-resisstant ringed piston for automotive engines
QC/T 243-2004 Performance requirements and test methods of automobile wheels disc base planeness
QC/T 581-1999 Automobile rim - Profile inspection template
QC/T 900-1997 Inspection and evaluation method for automobile product quality
QC/T 242-2024 Static unbalance requirements and test methods of vehicle wheels
QC/T 262-1999 Metallographic Test of Car Carburizing Gear
QC/T 589-1999 Evaluation method for quality inspection of van
QCn 29018-1991 Metallographic inspection for carbonitriding gear of automobile
QC/T 553-2008 Metallographic inspection of casting aluminum piston for engines of automobile and motorcycle
QC/T 48-1992 Automobile gasoline filter
QC/T 651-2000 Evaluation method for quality inspection of vehicle products of mining dump truck
QC/T 490-2000 Auto Body mapping
QC/T 941-2013 Test Method for Mercury in Automobile Materials
QC/T 901-1998 Quality inspection and assessment method for automobile engine products
QC/T 241-2024 Air leakage detection methods of automobile wheels for tubeless tires
QC/T 983-2014 Measuring method of cleanliness of automobile manual transmission assembly
QC/T 490-2013 Drawings for motor vehicle body
QC/T 942-2013 Test Method for Hexavalent Chromium in Automobile Materials
QC/T 39-1992 Test method for piston ring of automobile and motorcycle engine
QC/T 424-1999 Test method for electrical characteristic of motorcar alternator
QC/T 296-1999 Method for checking calibrated diameter of automobile rim with ball tape ruler
QC/T 242-2014 Static unbalance requirements and test methods of vehicle wheels
CAB 1027-2014 Car covers
QC/T 587-1999 Evaluation method for quality inspection of tanker automobile
QC/T 717-2015 Road vehicle -Wheels- Requirements and Measuring methods of radial and lateral run-out

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4267-2022 Confirmation of detection points for lightning protection in automobile gas stations
DB32/T 4381-2022 Test methods of drive motor system for electric vehicles in service

Henan Provincial Standard of the People's Republic of China

DB41/T 1839-2019 Specifications for the supervision and inspection of mechanical parking equipment for automobile lifts
DB41/T 560-2019 Regulations for Periodic Inspection of Cryogenic Liquid Vehicle Tank Cars
DB41/T 1486-2017 Specifications for periodical inspection of automobile tankers and tank containers

Professional Standard - Speciality

ZB/T T50005-1989 Characteristic code for special purpose vehicles

Hebei Provincial Standard of the People's Republic of China

DB1305/T 88-2024 Auto parts product inspection guide

Professional Standard - Commodity Inspection

SN/T 0791-1999 Rules for the inspection of quality of automobiles for import and export
SN/T 1688.4-2013 Rules for the inspection of motro vehicles for import and export - Part X: Automobile products
SN/T 1669-2005 Rules for the inspection of electric cooling fans of automobile for import and export
SN/T 0250-1993 Rules for the inspection of truck crane and mobile crane for export
SN/T 1053-2002 Rules for the inspection of special tires limited to use of Mobile Homes for export
SN/T 0792-1999 Rules for the inspection of safety requirements of automobiles for import and export
SN/T 1053-2013 ules for the inspection of special tires limited to use of Mobile Homes for export
SN/T 1688.4-2006 Rules for the inspection of power-driven vehicles for import and export - Part 4: Motor vehicle products
SN/T 1341-2003 Codes of health quarantine inspection for entry-exit automobiles and other vehicles

Professional Standard - Machinery

JB/T 8405-2013 Tri-wheel Vehicles and Low-Speed Goods Vehicles - Rules for Type Inspection

国家质量监督检验检疫总局

SN/T 4579-2016 Rules for the inspection of motor vehicle parts for import-Aluminum alloy wheel

Professional Standard - Energy

NB/T 33008.1～33008.2-2018 Inspection and test specifications for electric vehicle charging equipment
NB/T 10641-2021 Testing equipment on-site for off-board charger of electric vehicle
NB/T 10901-2021 Field inspecting specification for electric vehicle charging equipment

Hubei Provincial Standard of the People's Republic of China

DB42/T 212-2002 Detergent detection method in motor gasoline
DB42/T 755-2011 Technical requirement for vehicle safety routine inspection of passenger transportation station

未注明发布机构

GJB 4629-1993*GJBz 20147-1993 Military automobile product inspection and acceptance procedures

Yunnan Provincial Standard of the People's Republic of China

DB53/T 714-2015 Automobile safety technical inspection specification (manual inspection part)

National Metrological Technical Specifications of the People's Republic of China

JJF 1141-2006 Calibration Specification for Turning Angle Testers for Automobile
JJF 1749-2019 Calibration Specification for Vehicle Contour Dimensions Testers
JJF 1192-2008 Calibration Specification for Automotive Suspension Tester
JJF(机械)1003-2018 Calibration specification for light vehicle emission detection system
JJF(机械) 1003-2018 Calibration specification for light vehicle emission detection system

司法部

SF/T 0077-2020 Technical specification for examination of vehicle electronic data

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36986-2018 Dynamic testing methods of brake performance for automobiles
GB/T 13564-2022 Roller opposite forces type automobile brake tester
GB/T 36987-2018 Testing methods of anti lock braking system(ABS) performance for automobiles
GB/T 4780-2020 Terms for motor vehicle body

Jilin Provincial Standard of the People's Republic of China

DB22/T 3622-2023 Technical specifications for rapid screening of ethanol gasoline (E10) for vehicles
DB22/T 1713-2012 General technical requirements for the verification device of automobile four-wheel aligner
DB22/T 1551-2012 Specifications for the operation and service of automobile comprehensive performance testing stations
DB22/T 1800-2013 Motor Vehicle Safety Technical Inspection Operation Specification Part 1: Automobile Safety Technical Inspection Operation Specification
DB22/T 1549-2012 Specifications for evaluation of testing capabilities of automobile comprehensive performance testing stations

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2027-2012 Technical requirements for vehicle safety inspection agencies at passenger stations

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2274-2021 Passenger Safety Inspection Guide for Bus Terminals

工业和信息化部

QC/T 942-2021 Test methods of hexavalent chromium in automotive materials
QC/T 243-2018 Flatness requirements and test methods of wheel attachment face
QC/T 1131-2020 Methods of detecting polycyclic aromatic hydrocarbons in automotive materials

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1757-2015 Comprehensive performance requirements and testing methods of electric vehicles in operation
DB44/T 1773-2015 Safety technical inspection items and methods for operating electric vehicles
DB44/T 87-2005 Second of automobile maintains the detection method of performance rating
DB4403/T 20-2019 Detection method of electric vehicle on-board lithium-ion power battery system
DB44/T 1467-2014 Electric vehicle DC charger inspection specification

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1725-2023 Safety Inspection Specifications for Entry into Bus Passenger Terminals

Professional Standard - Aerospace

QJ 1863-1990 Road test method of special vehicles for missiles

Professional Standard - Aviation

HBm 66.40-1990 Quality inspection and assessment method for gasoline engine of minivan

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 720-2013 Technical specifications for detection of lightning protection devices in automobile gas stations
DB36/T 720-2023 Technical Specifications for Testing of Lightning Protection Devices at Automobile Gas Stations

Anhui Provincial Standard of the People's Republic of China

DB34/T 3358-2019 Technical specifications and testing methods for shot blasting of automobile forgings

Shandong Provincial Standard of the People's Republic of China

DB37/T 3636-2019 Near Infrared Spectroscopy Method for Rapid Detection of Motor Gasoline
DB37/T 1731-2010 Specification for inspection of special equipment for compressed natural gas vehicles
DB37/T 2370-2013 Use, maintenance and testing of commercial LNG vehicles

Tianjin Provincial Standard of the People's Republic of China

DB12/T 674-2016 Technical specifications for maintenance, testing and diagnosis of pure electric vehicles

廊坊市市场监督管理局

DB1310/T 290-2022 Specifications for Lightning Protection Safety Inspection of Automobile Gas Stations

Fujian Provincial Standard of the People's Republic of China

DB35/T 1163-2011 Technical specifications for detection of lightning protection devices in automobile gas stations

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1584-2019 Technical specifications for detection of lightning protection devices for automobile refueling (gas) stations

Professional Standard - Goods and Materials

WB/T 1110-2021 Inspection specification for export packaging quality of automotive knocked down

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1831-2018 Technical specification for detection of lightning protection devices for automobile refueling stations

Professional Standard - Petrochemical Industry

SH/T 0773-2005 Standard test method for life performance of automotive wheel bearing grease

国家能源局

NB/T 33024-2016 Test specification for lithium-ion traction battery of Electric Vehicles

Sichuan Provincial Standard of the People's Republic of China

DB51/T 929-2012 Inspection specification for in-use automotive compressed natural gas equipment

Professional Standard - Electron

SJ/T 31160-1994 Requirements of readiness and methods of inspection and assessment for automobile light vacuum aluminum plating systems
SJ/T 31159-1994 Requirements of readiness and methods of inspection and assessment for automobile light exhausters
SJ/T 31161-1994 Requirements of readiness and methods of inspection and assessment for automobile light sealing machines

GOST

GOST R 59857-2021 Automobile vehicles. Automotive and automotive research expertise. Terms and definitions
GOST R 50574-1993 Automobiles, buses and motorcycles of urgent services. Colours, identification symbols, inscriptions, special light and sound signals. General requirements
GOST 32513-2023 Motor gasoline. Specifications

HU-MSZT

MSZ 11062-1966 Tire tube burden, automotive and specialty vehicles
MNOSZ 6490-1953 Inspection of earth-moving vehicles
MNOSZ 6462-1953 Social transportation vehicle (bus) carriage quality inspection
MSZ 21866/1-1979 Automotive engine air equipment testing
MSZ 21871-1980 Gasoline trucks checking air pollution
MNOSZ 13944-1953 car parts. Engine Case Inspection and Evaluation
MSZ 18335-1966 Requirements for cars, inspection, classification and his position on motor vehicles
MSZ 14590-1979 General industrial requirements and testing of liquefiers for road vehicles

Korean Agency for Technology and Standards (KATS)

KS R 1035-1980 Inspection of distributors for automobiles
KS R 1035-2013 Inspection of distributors for automobiles
KS R 1036-1980 Inspection of condenser for automobile contact breakers
KS R 1035-2005(2010) Inspection of distributors for automobiles
KS R 1036-2005 Inspection of condenser for automobile contact breakers
KS R 1036-2005(2010) Inspection of condenser for automobile contact breakers
KS R 5069-1993(1998) SPECIAL WARNING LIGHTS FOR AUTOMOBILES
KS R 5069-1993 SPECIAL WARNING LIGHTS FOR AUTOMOBILES
KS R 5035-1980 Gas leakage alarms for LP gas automobiles
KS R 5035-2005(2010) Gas leakage alarms for LP gas automobiles
KS R 1035-2005 Inspection of distributors for automobiles
KS R 1065-2005(2010) Inspection of hazard warning switches for automobiles
KS R 1076-1998 General rules of brake test method of automobiles and motor cycles
KS R 1065-1980 Inspection of hazard warning switches for automobiles
KS R 1039-2005 Inspection of DC generators for automobiles
KS R 1039-1980 Inspection of DC generators for automobiles
KS R 1065-2015 Inspection of hazard warning switches for automobiles
KS R 1039-2013 Inspection of DC generators for automobiles
KS R 1073-2004 Methods of inspection for serviceability of automotive wheel bearings
KS R 1065-2005 Inspection of hazard warning switches for automobiles
KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
KS B ISO 22915-20-2015(2020) Industrial trucks－Verification of stability－Part 20：Additional stability test for trucks operating in the special condition of offset load, offset by utilization
KS B ISO 22915-3-2015(2020) Industrial trucks－Verification of stability－Part 3：Reach and straddle trucks
KS M 2612-2012 Motor gasoline
KS R 1073-2014 Methods of inspection for serviceability of automotive wheel bearings
KS R 0114-2006(2011) Glossary of terms relating to electric vehicles－Vehicles
KS M 2039-2006(2021) Motor fuels — Determination of knock characteristics —Research method
KS R 5022-2020 Speedometers for automobiles
KS R 4056-2013 Brake hub for automobiles
KS M ISO 10571:2012 Tyres for mobile cranes and similar specialized machines
KS R 0011-1986 Gossary of terms relating to kinds of automobiles－Part 1：Kinds of automobiles
KS R 0011-2012 Gossary of terms relating to kinds of automobiles－Part 1：Kinds of automobiles
KS R 5017-1983 Relays for automobiles-Arrangement and functional attribution of arrayed terminals and dimension of relays
KS R 5017-2008 Relays for automobiles-Arrangement and functional attribution of arrayed terminals and dimension of relays
KS R 5022-2005(2020) Speedometers for automobiles
KS R 2017-1996 Wheel nuts for automobiles
KS R 2017-1996(2011) WHEEL NUTS FOR AUTOMOBILES
KS R 2017-2013 WHEEL NUTS FOR AUTOMOBILES

SCC

TDCC 928:1992 UCS - Automotive Inspection Detail
UNE 26400:1989 ROAD VEHICLES. CHRACTERISTICS OF THREADED MECHANICAL PARTS FOR THE AUTOMOTIVE INDUSTRIES.
UNE 26400:1990 ERRATUM ROAD VEHICLES. CHRACTERISTICS OF THREADED MECHANICAL PARTS FOR THE AUTOMOTIVE INDUSTRIES.
HOLDEN HN 0020-2012 Determination of Fogging Characteristics of Automotive Interior Trim Materials
HOLDEN HN 0020-1989 Determination of Fogging Characteristics of Automotive Interior Trim Materials
AENOR UNE 007:1965 LIGHTING AND OPTICAL SIGNALING FOR AUTOVEHICLES AND TRAILERS. FUNDAMENTAL CHARACTERISTICS OF LIGHTS
UNE 26163:1963 MANOMETERS FOR CARS. QUALITY CARS
AENOR UNE 26400:1989 Motor vehicles. Characteristics of threaded fastening elements used in the automotive industry.
DIN 75201 E:2010 Draft Document - Determination of the fogging characteristics of trim materials in the interior of automobiles
AENOR UNE 53535:2008 Elastomers. Elastomers for automotive application. Characteristics and designation.
MIL MIL-D-81227B-1976 DETECTOR KIT, WATER, AUTOMOTIVE - AVIATION FUEL (SUPERSEDING MIL-D-81227A)
CAN/CGSB-3.5-M87-1987 Gasoline, Automotive, Unleaded
BS PD IEC PAS 61851-1-1:2023 Electric vehicle conductive charging system-Specific requirements for electric vehicle conductive charging system using type 4 vehicle coupler
AENOR UNE 51509:1957 GASOLINE FOR WAR AUTOMOTIVES
CAN/CGSB-3.1-M87-1987 Gasoline, Automotive, Leaded
UNE-CEN/TS 14906:2005 EX Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive
DIN CEN/TS 14906:2005 Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive; German version CEN/TS 14906:2004
UNE 26314:1983 VEHICLES AUTOMOBILES. NAME PLATE.
VDI 4080-2009 Automotive recycling — quality of used vehicle parts

DE-VDA

VDA 230-216-2009 VDA Test Sheet - Automotive Industry Leather Testing Method
VDA 230-216-2013 Test Procedures for Leather in the Automotive Industry
VDA 230-203-2008 Testing methods for textiles in the automotive industry

Indonesia Standards

SNI 09-6043-1999 Test method for air conditioner of automobiles

RU-GOST R

GOST 18507-1973 Buses and cars. Control test methods after capital repair
GOST 8.262-1977 State system for ensuring the uniformity of measurements. Autocar and cycle speedometers. Verification methods and means
GOST 25478-1982 Commercial vehicles, rassenger buses and trailers. Safety gequirements to technical condition. Methods of inspection
GOST 25651-1983 Testing and measuring instruments for vehicles. General technical requirements. Test methods

RO-ASRO

STAS 6926/8-1989 Motor vehicles SPEED CHECS MOUNTED RUN DISTANCE Requirements and inspection methods
STAS 6689/4-1975 Motor vehicles and trailers DYNAMIC CHARACTERISTICS Terminology
STAS 7080/1-1986 ELECTRICUL INCANDESCENT MONO-F1LAMENT LAMPS FOR MO- TOR VEHICI.ES AND TRA1LERS AUTOMOBILE LAMPS, SYMBOL ASo Dimensions and main characteristics
STAS 6926/1-1978 MOTOR VEHICLES TESTING METHODS General specifications
STAS 7081/1-1986 Electrical incandescent two-filament lamps for motor vehicles and trailers AUTOMOBIL.E L.AMPS, SYMBOL AB Dimensions and main characteristics
STAS R 10666/2-1976 Motor Vehicles DETERMINATION OF THE ELEMENTS OF SEATING ACCOMODATION AND PASSENGER'S PLACE FOR MOTOR LORRIES, RISES AND TROLLEYRUSES Tridimensional dummy
STAS R 10666/3-1976 Motor vehicles DETERMINATION OF THE ELEMENTS OF SEATING ACCOMODATION AND PASSAGER'S PLACE FOR MOTOR LORRIES, BUSES AND TROLLEYBUSES Bidimensional dummy (flat)
STAS 7081/3-1986 Electrical incandescent two-filament lamps for motor vehicles and trailers AUTOMOBILE LAMPS. SYMBOL ABea Dimensions and main characteristics
STAS 7080/2-1986 Eleclrical incandescent mono-filament lamps for motor veliicles and trailers ? AUTOMOBILE LAMPS, SYMBOI.AL Dimensions and main cliaractcristics
STAS 7081/2-1986 Electrical incandescent two-filament lamps for motor vehicles and trailers AUTOMOBILE LAMPS, SYMBOL ABe Dimensions and main characteristics
STAS 7080/3-1986 Eleclrical incandescent mono filament lamps for motor veliicles and trailers AUTOMOBILE LAMPS, SYMBOL A.S Dimensions and main cllaracteristics
STAS 7139/1-1991 Road vehicles WHEELS FOR BUSES, COMMERCIAL VEHICLES AND SPECIAL VEHICLES General technlcal requlrements for quality

Japanese Industrial Standards Committee (JISC)

JIS D 5503:1982 Special warning lights for automobiles
JIS D 1023:1982 Overhauled inspection method of automobiles
JIS D 1610:1977 Inspection of dc generators for automobiles
JIS D 5811:1994 Inspection of hazard warning switches for automobiles
JIS D 1603:1979 Inspection of distributors for automobiles
JIS D 8006:1983 Simplified carbonmonoxide testers for automobiles
JIS K 2202:1996 Motor gasoline
JIS K 2202:1999 Motor gasoline
JIS D 1604:1976 Inspection of condensers for automobile contact breakers
JIS D 5705:1993 Mirrors for automobiles
JIS D 5813:1994 Door switches for automobiles

VDI - Verein Deutscher Ingenieure

VDI 3566 BLATT 1-1971 INSPEKTIONSPLAN FUeR FLURFOeRDERZEUGE - MIT ELEKTROMOTORISCHEM ANTRIEB

CN-STDBOOK

图书 3-9160 Automobile chassis structure and maintenance
图书 A-4627 Automobile electrical equipment structure and maintenance

FI-SFS

SFS 2463-1970 Car seat belts. Inspection Method
SFS 5190-1985 Definition of cars and trucks. Checkpoints and Evaluation Instructions

Association Francaise de Normalisation

NF R12-791-2:1989 Passenger car tyres and rims. Rims.
NF R63-201:1985 Road vehicles. Garage equipment. Engine testing and measuring equipment.
NF R15-504:1972 Endless V belts-geometrical characteristics.
NF EN 13423:2021 Operation of natural gas vehicles - Requirements for CNG vehicle workshops and management of compressed natural gas (CNG) vehicles

GSO

GSO 971:1997 Motor Vehicles -Periodic Technical Inspection Mamual .
OS GSO 280:2005 CAR UPHOLSTERY – FABRIC FOR CAR SEATS
GSO 1781:2006 Motor vehicles-world manufacturer identifier
GSO 594:1995 Brake fluids for road vehicles.
GSO 808:1997 METHODS OF TESTING GASOLINE – DETERMINATION OF OCTANE NUMBER (RESEARCH METHOD)

NL-NEN

NEN-EN 228-1993 Automative fuels. Unleaded petrol. Requirements and methods of test

American National Standards Institute （ANSI)

ANSI/NGA R1.1-2007 Repair of Laminated Automotive Glass Standard (ROLAGS)
ANSI/AWS D8.9M:2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials

GB-REG

REG 49 CFR PART 230-2011 STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS

US-DOT

DOT 49 CFR PART 230-2010 STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS

International Organization for Standardization (ISO)

ISO 10454:1993 Truck and bus tyres; verifying tyre capabilities; laboratory test methods
ISO 5164:1977 Motor fuels — Determination of knock characteristics — Research method

British Standards Institution (BSI)

BS AU 242a:1998 Automotive windscreen repair - Code of practice
BS ISO 11026:2010 Heavy commercial vehicles and buses. Test method for roll stability. Closing-curve test
BS EN 14906:2012 Leather. Leather for automotive. Test methods and testing parameters
BS AU 251:1994 Specification for performance of automotive laminated windscreen repair systems

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO Z218-1982 Glossary of Terms Relating to Aerodynamic Characteristics of Automobiles
JASO D002-1991 Methods of Measurement of Radio Interference Characteristics of Automobiles
JASO D305-1998 Automotive Parts - Automotive Clock Test

BE-NBN

NBN R 01-030-1979 Road vehicles - Passenger cars - Driver hand control reach

Society of Automotive Engineers (SAE)

SAE J312-2010 Automotive Gasolines
SAE J2329-1997 Categorization and Properties of Low-Carbon Automotive Sheet Steels
SAE J1600-2001 Method for Evaluating the Adhesion Characteristics of Automotive Sealers
SAE J2745-2007 Categorization and Properties of Advanced High Strength Automotive Sheet Steels
SAE J40D-1967 AUTOMOTIVE BRAKE HOSES
SAE J40C-1967 Automotive Brake Hoses

German Institute for Standardization

DIN 75201:2023-11 Determination of the fogging characteristics of trim materials in the interior of automobiles
DIN 75201:2023-03 Determination of the fogging characteristics of trim materials in the interior of automobiles / Note: Date of issue 2023-02-10*Intended as replacement for DIN 75201 (2011-11).
DIN 75201:2011-11 Determination of the fogging characteristics of trim materials in the interior of automobiles
DIN EN 17278:2022-01 Natural gas vehicles - Vehicle fuelling appliances; German version EN 17278:2021 / Note: This standard is part of the DVGW body of rules.
DIN 75201:2011 Determination of the fogging characteristics of trim materials in the interior of automobiles
DIN EN 17963:2023-05 Natural gas vehicles - LNG vehicle fuelling procedures; German and English version prEN 17963:2023 / Note: Date of issue 2023-04-14
DIN EN ISO 14460:2002 Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999 + Amd. 1:2002) (includes Corrigendum AC:1999 and Amendment A1:2002); German version EN ISO 14460:1999 + AC:19

DIN

DIN 75201:2023 Determination of the fogging characteristics of trim materials in the interior of automobiles
DIN 75201:2024 Determination of the fogging characteristics of trim materials in the interior of automobiles

ES-AENOR

UNE 51-019-1987 Characteristics of automotive and aviation engine fuels

IT-UNI

UNI 5696-1965 Compression cylinders for public service railways, trams, trolleybuses and bus vehicles. Characteristics and tests

SAE - SAE International

SAE J2329-2015 Categorization and Properties of Low-Carbon Automotive Sheet Steels
SAE J1600-1987 Method for Evaluating the Adhesion Characteristics of Automotive Sealers@ Recommended Practice
SAE J2745-2015 Categorization and Properties of Advanced High Strength Automotive Sheet Steels

BSI

BS 5012 DIVISION XVII:1923 Automobile coachwork

GOSTR

GOST 21392-1990 Automobiles, buses and motorcycles of urgent services. Colours, indentification symbols, inscriptions, special light and sound signals

Compressed Gas Association (U.S.)

CGA C-6.4-2012 METHODS FOR EXTERNAL VISUAL INSPECTION OF NATURAL GAS VEHICLE(NGV) AND HYDROGEN VEHICLE(HV) FUEL CONTAINERS AND THEIR INSTALLATIONS

US-FCR

FCR FED MP-3-PRG-G-7-1959 AUTOMOTIVE VEHICLES

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE HVAC APPLICATIONS IP CH 10-2011 AUTOMOBILES
ASHRAE HVAC APPLICATIONS IP CH 10-2015 AUTOMOBILES
ASHRAE HVAC APPLICATIONS SI CH 10-2011 AUTOMOBILES
ASHRAE HVAC APPLICATIONS SI CH 10-2015 AUTOMOBILES

Danish Standards Foundation

DS/EN 17278:2021 Natural gas vehicles – Vehicle fuelling appliances
DS/EN 25163:1994 Motor and aviation-type fuels. Determination of knock characteristics. Motor method

U.S. Military Regulations and Norms

ARMY A-A-52530 VALID NOTICE 1-2004 GASOLINE, AUTOMOTIVE, UNLEADED
ARMY A-A-52530-1995 GASOLINE, AUTOMOTIVE, UNLEADED

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE APPLICATION IP CH 10-2011 AUTOMOBILES

GM North America

GM GM9541P-1991 Visual Discontinuity Inspection Procedure for Automotive Glazing Materials
GM GM9305P-1992 Determination of Fogging Characteristics of Automotive Interior Trim Materials

TH-TISI

TIS 97-2014 Brake linings for vehicles
TIS 687-1987 Standard for automotive lamps

IL-SII

S.I.600-1966 BRAKE DRUMS FOR VEHICLES

European Committee for Standardization (CEN)

prEN 819-1992 Helmets for landbased motor vehicle competition use (motor cycles and automobiles)

BELST

STB 2076-2010 Road vehicles. Buses and special vehicles on their basis. Generic specifications

Standard Association of Australia （SAA）

AS/NZS 2557:1999 Limits and methods of measurement of radio interference characteristics of vehicles, motor boats and spark-ignited engine-driven devices